Add the license text in the license pool.
Replace the BSD boilerplate with the SPDX tag.
Add the copyright owner of Jim Project, as it was explicitly
listed in the boilerplate text.
The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.
Change-Id: I6dd004b1945773c10539016ce733d1fbfe776a9d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7060
Tested-by: jenkins
Replace the BSD boilerplate with the SPDX tag.
The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.
Change-Id: I5a8cab2051eee7eb99adf67f9631b0827c1359de
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7059
Tested-by: jenkins
Some file miss completely the license tag.
Add the SPDX tag, using the same GPL-2.0-or-later license of the
OpenOCD project.
The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.
Change-Id: I1fb51e722232d14f050458a820c3041de3dc9138
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7058
Tested-by: jenkins
SPDX tag is replacing the FSF boilerplate.
For files that have both, remove the FSF boilerplate and keep only
the SPDX tag.
Change-Id: I04c4764d13d4ca92453f30ed16aeae53cd4c3fc8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7057
Tested-by: jenkins
Add the SPDX tag to makefiles, configuration scripts and tcl files
present in the folders under src/
Change-Id: I1e4552aafe46ef4893d510da9d732c5f181784a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7051
Tested-by: jenkins
ARM/RISC-V semihosting calls SYS_READ/SYS_WRITE require
inversion of the result value as described in
"Semihosting for AArch32 and AArch64". Prior to
this patch, this was done correctly only if
(semihosting->is_fileio==false).
This patch has been tested with STM32F446.
Change-Id: I1b34c8d8393f7dfa66ee6539904a2eaf8f9154b0
Signed-off-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/232/
Reviewed-on: https://review.openocd.org/c/openocd/+/6803
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The variable 'smp_break' is only set and used in case of smp.
But clang cannot track if 'target->smp' get modified between the
set and the use of 'smp_break', so it consider possible to use
'smp_break' uninitialized.
Initialize 'smp_break' to silent clang.
Change-Id: Ifa25a84fe9ffa25b8b58d7920ec77994c3b7ebfe
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 77287b8d47 ("target: add Espressif ESP32 basic support")
Reviewed-on: https://review.openocd.org/c/openocd/+/7050
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
These enum values are useful for the arch level semihosting call handlers.
Currently riscv uses them, we also need similar return codes for the xtensa.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I8f63749cc203c59b07862f33edf3c393cd7e33a9
Reviewed-on: https://review.openocd.org/c/openocd/+/7039
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This driver is used with the ESP32 chips which has builtin USB-JTAG
interface. e.g. with ESP32-C3, ESP32-S3
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: If966268cb8d26f76540dd5440245a17ed0b72c61
Reviewed-on: https://review.openocd.org/c/openocd/+/6943
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
These are the misleading error messages that this change prevents:
configure.ac:13: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:48: error: possibly undefined macro: AC_DEFINE
configure.ac:342: error: possibly undefined macro: AC_MSG_ERROR
configure.ac:608: error: possibly undefined macro: AC_MSG_NOTICE
Change-Id: I21bcc7715eeac0f3d0bcc60bba6801e6a895cdd0
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7035
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
New mingw compiler correctly complains for using a freed memory
area:
src/helper/configuration.c: In function 'get_home_dir':
src/helper/configuration.c:182:29: error: dangling pointer 'home'
to 'homepath' may be used [-Werror=dangling-pointer=]
182 | home_path = alloc_printf("%s/%s", home, append_path);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In fact the variable 'homepath' is declared inside an 'if' branch
and is not available outside.
Move the declaration of 'homepath' to have it available in a wider
context.
Change-Id: I4a43a03c007c9f0d5c4cee962a9f7cc83ca49637
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Dietmar May <dietmar.may@outlook.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7038
Tested-by: jenkins
Reviewed-by: Dietmar May <dietmar.may@outlook.com>
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7030
Tested-by: jenkins
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/interface | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7029
Tested-by: jenkins
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/ target| while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
The SPDX tag is aimed at machine handling and it's thus expected
to be placed in the first line.
Change-Id: I3992856eeb28b333c38d010ef286e22471ede263
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7026
Tested-by: jenkins
OpenOCD project is switching to SPDX tags.
Replace the few FSF boilerplate in tcl folder.
Change-Id: I15b146eb77cc491ed7355178f684f3e76fc763b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7025
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Commit b9526f1401 ("semihosting: permit redirection of
semihosting I/O to TCP") introduces a new comparison with NULL.
Remove it.
Change-Id: Ice4333c50d16f7592f0ff86b1640217fa42e34f6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: b9526f1401 ("semihosting: permit redirection of semihosting I/O to TCP")
Reviewed-on: https://review.openocd.org/c/openocd/+/7031
Tested-by: jenkins
We already have a helper to release the gpio.
Extend it to also release its corresponding gpio chip.
As side effect, remove comparison with NULL.
Change-Id: I47cd446edfaead662d63c3330f25a791b747e882
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7033
Tested-by: jenkins
Reviewed-by: Steve Marple <stevemarple@googlemail.com>
Commit 20adf85f34 ("linuxgpiod: add SWDIO buffer") introduces an
additional gpio for SWDIO direction, but does not release it at
driver's exit.
Release the gpio at exit.
Change-Id: If7ea31f79ffed04af585864e49bcf1f35e118bdd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7032
Tested-by: jenkins
Reviewed-by: Steve Marple <stevemarple@googlemail.com>
Commit 6c0151623c ("aarch64: add support for "reset halt"")
introduces the register setting to halt at reset vector, but:
- does not consider the case 'srst_pulls_trst' that makes useless
setting the registers as they will be erased by the pulled trst;
- does not clean sticky errors in case of 'srst_gates_jtag'.
Avoid any register initialization on 'srst_pulls_trst' and move
the cleaning of sticky errors in the common block.
Change-Id: I6f839f06f7b091e234ede31ec18096e51f017bcd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 6c0151623c ("aarch64: add support for "reset halt"")
Reviewed-on: https://review.openocd.org/c/openocd/+/7034
Tested-by: jenkins
Reviewed-by: Christian Hoff <christian.hoff@advantest.com>
In order to facilitate debugging multiple cores, specify the coreid and
the hwthread rtos in the imx8m target configuration.
Change-Id: Ibd871517a160ceca15002fb10e27cb793f14d086
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-on: https://review.openocd.org/c/openocd/+/7019
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Custom user syscalls can be handled with target events in the TCL scripts.
This patch gives another opportunity to handle custom syscalls in the c files.
Besides that some utility functions are also exported for the custom handlers.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ice13d527540a0de0b2a8abda912ae3dcff3834b7
Reviewed-on: https://review.openocd.org/c/openocd/+/6889
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ESP32-S3 is a dual core Xtensa SoC
Not full featured yet. Some of the missing functionality:
-Semihosting
-Flash breakpoints
-Flash loader
-Apptrace
-FreeRTOS
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I44e17088030c96a9be9809f6579a4f16dbfc5794
Reviewed-on: https://review.openocd.org/c/openocd/+/6990
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ESP32 is a dual core Xtensa SoC
Not full featured yet. Some of the missing functionality:
-Semihosting
-Flash breakpoints
-Flash loader
-Apptrace
-FreeRTOS
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I76fb184aa38ab9f4e30290c038b5ff8850060750
Reviewed-on: https://review.openocd.org/c/openocd/+/6989
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add Ampere Altra ("Quicksilver") and Ampere Altra Max ("Mystique")
target/board configuration files.
The target configuration file supports silicon and emulation.
The board configuration files support 1 and 2 socket platforms.
Tested on Ampere emulation and silicon
Change-Id: I036c798a50624e30ab51ccd2895b6f60c40be096
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5591
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Arm "CoreSight System-on-Chip SoC-600" specification describes a
bridge "Access Port v1 adapter" aimed to "connect a legacy Access
Port (AP) ... into an CoreSight Architecture v3 system".
A ROM table can be located in the "legacy" part of the system,
on the legacy AP behind the APv1 adapter.
For the purpose of scanning the ROM tables, consider an ADIv6
SoC-600 APv1 adapter as an ADIv5 AP.
Change-Id: I97d42fb77013c1251fb68d0caa4274086bf38a70
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6827
Tested-by: jenkins
Configuration file can specify, as target's debug AP, an AP that
contains a ROM table that points, in turn, to other APs.
Current code in cortex_a and aarch64 is not able to handle a
return from dap_lookup_cs_component() that points to another AP.
While it could be interesting to specify 'root' as target's debug
AP, drop any found value if it's not in the starting AP.
Change-Id: Id206e4fa7a29e9402c8e2393026817b410bbb8bd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6826
Tested-by: jenkins
ADIv6 adds AP that only contain a ROM table in the AP itself, that
can point to other AP containing either another AP level ROM table
or a MEM-AP to be parsed as usual.
Add support for parsing AP level ROM tables.
Change-Id: Ic25863b16463b8a6adc3b15e26db7fdca858d6df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6467
Tested-by: jenkins
ADIv6 adds AP that only contain a ROM table in the AP itself, that
can point to other AP containing either another AP level ROM table
or a MEM-AP to be parsed as usual.
To handle recursive AP access, reorganize the code to:
- pass the depth==0 from the command 'dap info';
- print the AP number as first line, adding proper indentation on
depth>0;
- align the following print with proper indentation.
Change-Id: I5b811810c807fc51b307bd60f67817d9de2aa095
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6466
Tested-by: jenkins
On ADIv6 the system root ROM table is found by reading the DAP DP
registers BASEPTR0 and BASEPTR1.
Add option 'root' to the commands 'dap info' to let it retrieve
the system root ROM table's AP from DAP DP, then use such AP for
following dump.
Change-Id: I1789457a005faa3870c5d14f763378d2f6a5f095
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6462
Tested-by: jenkins
ADIv5 DAP can only have 256 AP, while ADIv6 can provide till
2**40 (1,099,511,627,776) AP per DAP.
Reuse the field ap_num in struct adiv5_ap, currently used on ADIv5
to hold the ADIv5 AP number (apsel), to contain the ADIv6 AP base
address.
Convert struct adiv5_ap->ap_num to 64 bit and initialize it to
DP_APSEL_INVALID for unused AP.
Restrict dap_find_get_ap() to ADIv5 only. To be enhanced.
On ADIv6, let dap_get_ap() return an already allocated AP, or
allocate and return an unused AP.
Add function is_ap_num_valid() and use it.
Change-Id: Ib2fe8c7ec0d08393cd91c29fdac5d632dfc1e438
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6461
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Tested-by: jenkins
During enter in SWD read DP_DPIDR without selecting the register
bank through DP_SELECT_DPBANK.
Handle the different format of DP_SELECT register.
Change-Id: Iea1b8eb6ec94177e16a430d5885595a38e833eeb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6697
Tested-by: jenkins
ADIv5 reports:
Accessing AP registers or debug resources in connected
device through an AP can be subjected to other variable
response delays in the system. A debugger that can adapt
to these delays and avoid wasting WAIT scans operates more
efficiently and provides higher maximum data throughput.
The existing code in OpenOCD uses extra tck only for accessing
resources through an AP.
Extend the use of extra tck also for accessing an AP register.
Split from change https://review.openocd.org/6077/
Change-Id: I2082362e098d09f4ba0668e01f5196afc965c8f3
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6460
Tested-by: jenkins
swd and dap-direct are not implemented yet
Split from change https://review.openocd.org/6077/
Change-Id: I6d73d8adf6a6090001c5d4771325fb1d63c45e3c
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6459
Tested-by: jenkins
By accessing invalid AP in JTAG mode, it's possible to trigger the
error:
JTAG-DP STICKY ERROR
After that the sticky error is never cleared and the whole DAP
gets not anymore accessible.
Clean-up the sticky error once detected.
Change-Id: I8b07263b30f9e46645f0c29084b8f1626e241f45
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6430
Tested-by: jenkins
Required for parsing ADIv6 ROM tables.
Split from change https://review.openocd.org/6077/
Change-Id: I849543b7b4a4455b10bd9fc7da38a37849d71700
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6458
Tested-by: jenkins
ADIv5 MEM-AP registers are a subset of ADIv6 MEM-AP registers and
are located at different offset.
To prepare for introducing ADIv6, add 'struct adiv5_dap *' as
argument to ADIv5 registers macro.
Check the ADI version and use the proper address.
Both adapter drivers rshim and stlink are ADIv5 only, so let them
use the ADIv5 macros only.
Split from change https://review.openocd.org/6077/
Change-Id: Ib861ddcdab74637b2082cc9f2612dea0007d77b1
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6457
Tested-by: jenkins
Add flags to 'dap create' command and set the field adi_version
in struct adiv5_dap.
Actually only ADIv5 is functional. Other patches are needed to get
ADIv6 working.
Split from change https://review.openocd.org/6077/
Change-Id: I63d3902f99a7f139c15ee4e07c19eae9ed4534b9
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6456
Tested-by: jenkins
While an ADIv5 DAP can only have 256 AP, ADIv6 can provide till
2**40 (1,099,511,627,776) AP per DAP.
The actual trivial code implementation for ADIv5 (that uses an
array of 256 ap in the struct adiv5_dap) cannot be extended as-is
to handle ADIv6.
The simple array of 256 AP can be reused as a dynamic storage for
ADIv6 ap:
- the ADIv5 AP number is replaced by the ADIv6 base address;
- the index of the array (equal to ADIv5 AP number) has no link to
any ADIv6 property;
- the ADIv6 base_address has to be searched in the array of AP.
The 256 elements in the AP array should be enough for any device
available today. In future it can be easily increased, if needed.
To efficiently use the 256 elements in the AP array, the code
should associate one element of the array to an ADIv6 AP (through
the AP base address), then cancel the association when the AP is
not anymore needed. This is important to avoid saturating the AP
array while exploring the device through 'dap apreg' commands.
Add a reference counter in the struct adiv5_ap to track how many
times the struct has been associated with the same base address.
Introduce the function dap_get_ap() to associate and return the
struct, and dap_put_ap() to release the struct. For the moment the
code covers ADIv5 only, so the association is through the index.
Use the two functions above and dap_find_get_ap() throughout the
code.
Check the return value of dap_get_ap(). It is always not NULL in
the current ADIv5-only implementation, but can be NULL for ADIv6
when there are no more available AP in the array.
Instrument dap_queue_ap_read() and dap_queue_ap_write() to log an
error message if the AP has reference counter zero, meaning that
the AP has not been 'get' yet. This helps identifying AP used
without get/put, e.g. code missed by this patch, or merged later.
Instrument dap_cleanup_all() to log an error message if an AP has
reference counter not zero at openocd exit, meaning that the AP
has not been 'put' yet.
Change-Id: I98316eb42b9f3d9c9bbbb6c73b1091b53f629092
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6455
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Tested-by: jenkins
There is an accsess to wrong index, when arm semihosting_basedir
command not used or basedir set to empty string.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I3afa049d74b30496f5c03ba4ef67431784f81bdc
Fixes: ce5027ab01 ("semihosting: add semihosting_basedir command")
Reviewed-on: https://review.openocd.org/c/openocd/+/7005
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In function adiv5_jim_configure() check that calloc() returns a
valid allocated memory pointer.
Change-Id: I97287e168834693900341add9d9eb9a5f38c55b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7014
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The array is partially initialized with buf_set_u32(,5,32,), then
the rest of the array is read from SWD.
But scan-build report the array to have garbage content after the
initialization, due to the offset of 5 bit that only inits part of
the first byte.
Silence the false positive from scan-build by initializing the
array.
Change-Id: Ic38d50280f67939e3ec5fa05741f66d5f993f8c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7013
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Antonio Borneo
Pavel Kirienko
Erhan Kurubas
R. Diez
Alvin Šipraga
Daniel Goehring
Kevin Burke
Tarek BOCHKATI