riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
yosys/techlibs/intel_alm/common/megafunction_bb.v

718 lines
23 KiB
Verilog
Raw Normal View History

synth_intel_alm: alternative synthesis for Intel FPGAs By operating at a layer of abstraction over the rather clumsy Intel primitives, we can avoid special hacks like `dffinit -highlow` in favour of simple techmapping. This also makes the primitives much easier to manipulate, and more descriptive (no more cyclonev_lcell_comb to mean anything from a LUT2 to a LUT6).
2019-11-19 04:19:00 -06:00
// Intel megafunction declarations, to avoid Yosys complaining.
`default_nettype none
intel_alm: add more megafunctions. NFC.
2020-08-12 08:55:42 -05:00
(* blackbox *)
module altera_pll
#(
parameter reference_clock_frequency = "0 ps",
parameter fractional_vco_multiplier = "false",
parameter pll_type = "General",
parameter pll_subtype = "General",
parameter number_of_clocks = 1,
parameter operation_mode = "internal feedback",
parameter deserialization_factor = 4,
parameter data_rate = 0,
parameter sim_additional_refclk_cycles_to_lock = 0,
parameter output_clock_frequency0 = "0 ps",
parameter phase_shift0 = "0 ps",
parameter duty_cycle0 = 50,
parameter output_clock_frequency1 = "0 ps",
parameter phase_shift1 = "0 ps",
parameter duty_cycle1 = 50,
parameter output_clock_frequency2 = "0 ps",
parameter phase_shift2 = "0 ps",
parameter duty_cycle2 = 50,
parameter output_clock_frequency3 = "0 ps",
parameter phase_shift3 = "0 ps",
parameter duty_cycle3 = 50,
parameter output_clock_frequency4 = "0 ps",
parameter phase_shift4 = "0 ps",
parameter duty_cycle4 = 50,
parameter output_clock_frequency5 = "0 ps",
parameter phase_shift5 = "0 ps",
parameter duty_cycle5 = 50,
parameter output_clock_frequency6 = "0 ps",
parameter phase_shift6 = "0 ps",
parameter duty_cycle6 = 50,
parameter output_clock_frequency7 = "0 ps",
parameter phase_shift7 = "0 ps",
parameter duty_cycle7 = 50,
parameter output_clock_frequency8 = "0 ps",
parameter phase_shift8 = "0 ps",
parameter duty_cycle8 = 50,
parameter output_clock_frequency9 = "0 ps",
parameter phase_shift9 = "0 ps",
parameter duty_cycle9 = 50,
parameter output_clock_frequency10 = "0 ps",
parameter phase_shift10 = "0 ps",
parameter duty_cycle10 = 50,
parameter output_clock_frequency11 = "0 ps",
parameter phase_shift11 = "0 ps",
parameter duty_cycle11 = 50,
parameter output_clock_frequency12 = "0 ps",
parameter phase_shift12 = "0 ps",
parameter duty_cycle12 = 50,
parameter output_clock_frequency13 = "0 ps",
parameter phase_shift13 = "0 ps",
parameter duty_cycle13 = 50,
parameter output_clock_frequency14 = "0 ps",
parameter phase_shift14 = "0 ps",
parameter duty_cycle14 = 50,
parameter output_clock_frequency15 = "0 ps",
parameter phase_shift15 = "0 ps",
parameter duty_cycle15 = 50,
parameter output_clock_frequency16 = "0 ps",
parameter phase_shift16 = "0 ps",
parameter duty_cycle16 = 50,
parameter output_clock_frequency17 = "0 ps",
parameter phase_shift17 = "0 ps",
parameter duty_cycle17 = 50,
parameter clock_name_0 = "",
parameter clock_name_1 = "",
parameter clock_name_2 = "",
parameter clock_name_3 = "",
parameter clock_name_4 = "",
parameter clock_name_5 = "",
parameter clock_name_6 = "",
parameter clock_name_7 = "",
parameter clock_name_8 = "",
parameter clock_name_global_0 = "false",
parameter clock_name_global_1 = "false",
parameter clock_name_global_2 = "false",
parameter clock_name_global_3 = "false",
parameter clock_name_global_4 = "false",
parameter clock_name_global_5 = "false",
parameter clock_name_global_6 = "false",
parameter clock_name_global_7 = "false",
parameter clock_name_global_8 = "false",
parameter m_cnt_hi_div = 1,
parameter m_cnt_lo_div = 1,
parameter m_cnt_bypass_en = "false",
parameter m_cnt_odd_div_duty_en = "false",
parameter n_cnt_hi_div = 1,
parameter n_cnt_lo_div = 1,
parameter n_cnt_bypass_en = "false",
parameter n_cnt_odd_div_duty_en = "false",
parameter c_cnt_hi_div0 = 1,
parameter c_cnt_lo_div0 = 1,
parameter c_cnt_bypass_en0 = "false",
parameter c_cnt_in_src0 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en0 = "false",
parameter c_cnt_prst0 = 1,
parameter c_cnt_ph_mux_prst0 = 0,
parameter c_cnt_hi_div1 = 1,
parameter c_cnt_lo_div1 = 1,
parameter c_cnt_bypass_en1 = "false",
parameter c_cnt_in_src1 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en1 = "false",
parameter c_cnt_prst1 = 1,
parameter c_cnt_ph_mux_prst1 = 0,
parameter c_cnt_hi_div2 = 1,
parameter c_cnt_lo_div2 = 1,
parameter c_cnt_bypass_en2 = "false",
parameter c_cnt_in_src2 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en2 = "false",
parameter c_cnt_prst2 = 1,
parameter c_cnt_ph_mux_prst2 = 0,
parameter c_cnt_hi_div3 = 1,
parameter c_cnt_lo_div3 = 1,
parameter c_cnt_bypass_en3 = "false",
parameter c_cnt_in_src3 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en3 = "false",
parameter c_cnt_prst3 = 1,
parameter c_cnt_ph_mux_prst3 = 0,
parameter c_cnt_hi_div4 = 1,
parameter c_cnt_lo_div4 = 1,
parameter c_cnt_bypass_en4 = "false",
parameter c_cnt_in_src4 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en4 = "false",
parameter c_cnt_prst4 = 1,
parameter c_cnt_ph_mux_prst4 = 0,
parameter c_cnt_hi_div5 = 1,
parameter c_cnt_lo_div5 = 1,
parameter c_cnt_bypass_en5 = "false",
parameter c_cnt_in_src5 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en5 = "false",
parameter c_cnt_prst5 = 1,
parameter c_cnt_ph_mux_prst5 = 0,
parameter c_cnt_hi_div6 = 1,
parameter c_cnt_lo_div6 = 1,
parameter c_cnt_bypass_en6 = "false",
parameter c_cnt_in_src6 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en6 = "false",
parameter c_cnt_prst6 = 1,
parameter c_cnt_ph_mux_prst6 = 0,
parameter c_cnt_hi_div7 = 1,
parameter c_cnt_lo_div7 = 1,
parameter c_cnt_bypass_en7 = "false",
parameter c_cnt_in_src7 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en7 = "false",
parameter c_cnt_prst7 = 1,
parameter c_cnt_ph_mux_prst7 = 0,
parameter c_cnt_hi_div8 = 1,
parameter c_cnt_lo_div8 = 1,
parameter c_cnt_bypass_en8 = "false",
parameter c_cnt_in_src8 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en8 = "false",
parameter c_cnt_prst8 = 1,
parameter c_cnt_ph_mux_prst8 = 0,
parameter c_cnt_hi_div9 = 1,
parameter c_cnt_lo_div9 = 1,
parameter c_cnt_bypass_en9 = "false",
parameter c_cnt_in_src9 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en9 = "false",
parameter c_cnt_prst9 = 1,
parameter c_cnt_ph_mux_prst9 = 0,
parameter c_cnt_hi_div10 = 1,
parameter c_cnt_lo_div10 = 1,
parameter c_cnt_bypass_en10 = "false",
parameter c_cnt_in_src10 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en10 = "false",
parameter c_cnt_prst10 = 1,
parameter c_cnt_ph_mux_prst10 = 0,
parameter c_cnt_hi_div11 = 1,
parameter c_cnt_lo_div11 = 1,
parameter c_cnt_bypass_en11 = "false",
parameter c_cnt_in_src11 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en11 = "false",
parameter c_cnt_prst11 = 1,
parameter c_cnt_ph_mux_prst11 = 0,
parameter c_cnt_hi_div12 = 1,
parameter c_cnt_lo_div12 = 1,
parameter c_cnt_bypass_en12 = "false",
parameter c_cnt_in_src12 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en12 = "false",
parameter c_cnt_prst12 = 1,
parameter c_cnt_ph_mux_prst12 = 0,
parameter c_cnt_hi_div13 = 1,
parameter c_cnt_lo_div13 = 1,
parameter c_cnt_bypass_en13 = "false",
parameter c_cnt_in_src13 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en13 = "false",
parameter c_cnt_prst13 = 1,
parameter c_cnt_ph_mux_prst13 = 0,
parameter c_cnt_hi_div14 = 1,
parameter c_cnt_lo_div14 = 1,
parameter c_cnt_bypass_en14 = "false",
parameter c_cnt_in_src14 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en14 = "false",
parameter c_cnt_prst14 = 1,
parameter c_cnt_ph_mux_prst14 = 0,
parameter c_cnt_hi_div15 = 1,
parameter c_cnt_lo_div15 = 1,
parameter c_cnt_bypass_en15 = "false",
parameter c_cnt_in_src15 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en15 = "false",
parameter c_cnt_prst15 = 1,
parameter c_cnt_ph_mux_prst15 = 0,
parameter c_cnt_hi_div16 = 1,
parameter c_cnt_lo_div16 = 1,
parameter c_cnt_bypass_en16 = "false",
parameter c_cnt_in_src16 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en16 = "false",
parameter c_cnt_prst16 = 1,
parameter c_cnt_ph_mux_prst16 = 0,
parameter c_cnt_hi_div17 = 1,
parameter c_cnt_lo_div17 = 1,
parameter c_cnt_bypass_en17 = "false",
parameter c_cnt_in_src17 = "ph_mux_clk",
parameter c_cnt_odd_div_duty_en17 = "false",
parameter c_cnt_prst17 = 1,
parameter c_cnt_ph_mux_prst17 = 0,
parameter pll_vco_div = 1,
parameter pll_slf_rst = "false",
parameter pll_bw_sel = "low",
parameter pll_output_clk_frequency = "0 MHz",
parameter pll_cp_current = 0,
parameter pll_bwctrl = 0,
parameter pll_fractional_division = 1,
parameter pll_fractional_cout = 24,
parameter pll_dsm_out_sel = "1st_order",
parameter mimic_fbclk_type = "gclk",
parameter pll_fbclk_mux_1 = "glb",
parameter pll_fbclk_mux_2 = "fb_1",
parameter pll_m_cnt_in_src = "ph_mux_clk",
parameter pll_vcoph_div = 1,
parameter refclk1_frequency = "0 MHz",
parameter pll_clkin_0_src = "clk_0",
parameter pll_clkin_1_src = "clk_0",
parameter pll_clk_loss_sw_en = "false",
parameter pll_auto_clk_sw_en = "false",
parameter pll_manu_clk_sw_en = "false",
parameter pll_clk_sw_dly = 0,
parameter pll_extclk_0_cnt_src = "pll_extclk_cnt_src_vss",
parameter pll_extclk_1_cnt_src = "pll_extclk_cnt_src_vss"
) (
//input
input refclk,
input refclk1,
input fbclk,
input rst,
input phase_en,
input updn,
input [2:0] num_phase_shifts,
input scanclk,
input [4:0] cntsel,
input [63:0] reconfig_to_pll,
input extswitch,
input adjpllin,
input cclk,
//output
output [ number_of_clocks -1 : 0] outclk,
output fboutclk,
output locked,
output phase_done,
output [63:0] reconfig_from_pll,
output activeclk,
output [1:0] clkbad,
output [7:0] phout,
output [1:0] lvds_clk,
output [1:0] loaden,
output [1:0] extclk_out,
output [ number_of_clocks -1 : 0] cascade_out,
//inout
inout zdbfbclk
);
endmodule
synth_intel_alm: alternative synthesis for Intel FPGAs By operating at a layer of abstraction over the rather clumsy Intel primitives, we can avoid special hacks like `dffinit -highlow` in favour of simple techmapping. This also makes the primitives much easier to manipulate, and more descriptive (no more cyclonev_lcell_comb to mean anything from a LUT2 to a LUT6).
2019-11-19 04:19:00 -06:00
(* blackbox *)
module altera_std_synchronizer(clk, din, dout, reset_n);
parameter depth = 2;
input clk;
input reset_n;
input din;
output dout;
endmodule
intel_alm: add more megafunctions. NFC.
2020-08-12 08:55:42 -05:00
(* blackbox *)
module altddio_in (
datain, // required port, DDR input data
inclock, // required port, input reference clock to sample data by
inclocken, // enable data clock
aset, // asynchronous set
aclr, // asynchronous clear
sset, // synchronous set
sclr, // synchronous clear
dataout_h, // data sampled at the rising edge of inclock
dataout_l // data sampled at the falling edge of inclock
);
parameter width = 1;
parameter power_up_high = "OFF";
parameter invert_input_clocks = "OFF";
parameter intended_device_family = "Stratix";
parameter lpm_type = "altddio_in";
parameter lpm_hint = "UNUSED";
input [width-1:0] datain;
input inclock;
input inclocken;
input aset;
input aclr;
input sset;
input sclr;
output [width-1:0] dataout_h;
output [width-1:0] dataout_l;
endmodule
(* blackbox *)
module altddio_out (
datain_h,
datain_l,
outclock,
outclocken,
aset,
aclr,
sset,
sclr,
oe,
dataout,
oe_out
);
parameter width = 1;
parameter power_up_high = "OFF";
parameter oe_reg = "UNUSED";
parameter extend_oe_disable = "UNUSED";
parameter intended_device_family = "Stratix";
parameter invert_output = "OFF";
parameter lpm_type = "altddio_out";
parameter lpm_hint = "UNUSED";
input [width-1:0] datain_h;
input [width-1:0] datain_l;
input outclock;
input outclocken;
input aset;
input aclr;
input sset;
input sclr;
input oe;
output [width-1:0] dataout;
output [width-1:0] oe_out;
endmodule
(* blackbox *)
module altddio_bidir (
datain_h,
datain_l,
inclock,
inclocken,
outclock,
outclocken,
aset,
aclr,
sset,
sclr,
oe,
dataout_h,
dataout_l,
combout,
oe_out,
dqsundelayedout,
padio
);
// GLOBAL PARAMETER DECLARATION
parameter width = 1; // required parameter
parameter power_up_high = "OFF";
parameter oe_reg = "UNUSED";
parameter extend_oe_disable = "UNUSED";
parameter implement_input_in_lcell = "UNUSED";
parameter invert_output = "OFF";
parameter intended_device_family = "Stratix";
parameter lpm_type = "altddio_bidir";
parameter lpm_hint = "UNUSED";
// INPUT PORT DECLARATION
input [width-1:0] datain_h;
input [width-1:0] datain_l;
input inclock;
input inclocken;
input outclock;
input outclocken;
input aset;
input aclr;
input sset;
input sclr;
input oe;
// OUTPUT PORT DECLARATION
output [width-1:0] dataout_h;
output [width-1:0] dataout_l;
output [width-1:0] combout;
output [width-1:0] oe_out;
output [width-1:0] dqsundelayedout;
// BIDIRECTIONAL PORT DECLARATION
inout [width-1:0] padio;
endmodule
synth_intel_alm: alternative synthesis for Intel FPGAs By operating at a layer of abstraction over the rather clumsy Intel primitives, we can avoid special hacks like `dffinit -highlow` in favour of simple techmapping. This also makes the primitives much easier to manipulate, and more descriptive (no more cyclonev_lcell_comb to mean anything from a LUT2 to a LUT6).
2019-11-19 04:19:00 -06:00
(* blackbox *)
module altiobuf_in(datain, dataout);
parameter enable_bus_hold = "FALSE";
parameter use_differential_mode = "FALSE";
parameter number_of_channels = 1;
input [number_of_channels-1:0] datain;
output [number_of_channels-1:0] dataout;
endmodule
(* blackbox *)
module altiobuf_out(datain, dataout);
parameter enable_bus_hold = "FALSE";
parameter use_differential_mode = "FALSE";
parameter use_oe = "FALSE";
parameter number_of_channels = 1;
input [number_of_channels-1:0] datain;
output [number_of_channels-1:0] dataout;
endmodule
(* blackbox *)
module altiobuf_bidir(dataio, oe, datain, dataout);
parameter number_of_channels = 1;
parameter enable_bus_hold = "OFF";
inout [number_of_channels-1:0] dataio;
input [number_of_channels-1:0] datain;
output [number_of_channels-1:0] dataout;
input [number_of_channels-1:0] oe;
endmodule
(* blackbox *)
module altsyncram(clock0, clock1, address_a, data_a, rden_a, wren_a, byteena_a, q_a, addressstall_a, address_b, data_b, rden_b, wren_b, byteena_b, q_b, addressstall_b, clocken0, clocken1, clocken2, clocken3, aclr0, aclr1, eccstatus);
parameter lpm_type = "altsyncram";
parameter operation_mode = "dual_port";
parameter ram_block_type = "auto";
parameter intended_device_family = "auto";
parameter power_up_uninitialized = "false";
parameter read_during_write_mode_mixed_ports = "dontcare";
parameter byte_size = 8;
parameter widthad_a = 1;
parameter width_a = 1;
parameter width_byteena_a = 1;
parameter numwords_a = 1;
parameter clock_enable_input_a = "clocken0";
parameter widthad_b = 1;
parameter width_b = 1;
parameter numwords_b = 1;
parameter address_aclr_b = "aclr0";
parameter address_reg_b = "";
parameter outdata_aclr_b = "aclr0";
parameter outdata_reg_b = "";
parameter clock_enable_input_b = "clocken0";
parameter clock_enable_output_b = "clocken0";
input clock0, clock1;
input [widthad_a-1:0] address_a;
input [width_a-1:0] data_a;
input rden_a;
input wren_a;
input [(width_a/8)-1:0] byteena_a;
input addressstall_a;
output [width_a-1:0] q_a;
input wren_b;
input rden_b;
input [widthad_b-1:0] address_b;
input [width_b-1:0] data_b;
input [(width_b/8)-1:0] byteena_b;
input addressstall_b;
output [width_b-1:0] q_b;
input clocken0;
input clocken1;
input clocken2;
input clocken3;
input aclr0;
input aclr1;
output eccstatus;
endmodule
intel_alm: direct LUTRAM cell instantiation By instantiating the LUTRAM cell directly, we avoid a trip through altsyncram, which speeds up Quartus synthesis time. This also gives a little more flexibility, as Yosys can build RAMs out of individual 32x1 LUTRAM cells. While working on this, I discovered that the mem_init0 parameter of <family>_mlab_cell gets ignored by Quartus.
2020-04-16 06:24:04 -05:00
(* blackbox *)
module cyclonev_mlab_cell(portaaddr, portadatain, portbaddr, portbdataout, ena0, clk0, clk1);
parameter logical_ram_name = "";
parameter logical_ram_depth = 32;
parameter logical_ram_width = 20;
parameter mixed_port_feed_through_mode = "new";
parameter first_bit_number = 0;
parameter first_address = 0;
parameter last_address = 31;
parameter address_width = 5;
parameter data_width = 1;
parameter byte_enable_mask_width = 1;
parameter port_b_data_out_clock = "NONE";
parameter [639:0] mem_init0 = 640'b0;
input [address_width-1:0] portaaddr, portbaddr;
input [data_width-1:0] portadatain;
output [data_width-1:0] portbdataout;
input ena0, clk0, clk1;
endmodule
intel_alm: DSP inference
2020-04-25 11:25:59 -05:00
(* blackbox *)
module cyclonev_mac(ax, ay, resulta);
parameter ax_width = 9;
intel_alm: Add multiply signedness to cells Quartus assumes unsigned multiplication by default, breaking signed multiplies, so add an input signedness parameter to the MISTRAL_MUL* cells to propagate to Quartus' <family>_mac cells.
2020-08-26 12:44:48 -05:00
parameter signed_max = "true";
intel_alm: DSP inference
2020-04-25 11:25:59 -05:00
parameter ay_scan_in_width = 9;
intel_alm: Add multiply signedness to cells Quartus assumes unsigned multiplication by default, breaking signed multiplies, so add an input signedness parameter to the MISTRAL_MUL* cells to propagate to Quartus' <family>_mac cells.
2020-08-26 12:44:48 -05:00
parameter signed_may = "true";
intel_alm: DSP inference
2020-04-25 11:25:59 -05:00
parameter result_a_width = 18;
parameter operation_mode = "M9x9";
input [ax_width-1:0] ax;
input [ay_scan_in_width-1:0] ay;
output [result_a_width-1:0] resulta;
endmodule
(* blackbox *)
module cyclone10gx_mac(ax, ay, resulta);
parameter ax_width = 18;
intel_alm: Add multiply signedness to cells Quartus assumes unsigned multiplication by default, breaking signed multiplies, so add an input signedness parameter to the MISTRAL_MUL* cells to propagate to Quartus' <family>_mac cells.
2020-08-26 12:44:48 -05:00
parameter signed_max = "true";
intel_alm: DSP inference
2020-04-25 11:25:59 -05:00
parameter ay_scan_in_width = 18;
intel_alm: Add multiply signedness to cells Quartus assumes unsigned multiplication by default, breaking signed multiplies, so add an input signedness parameter to the MISTRAL_MUL* cells to propagate to Quartus' <family>_mac cells.
2020-08-26 12:44:48 -05:00
parameter signed_may = "true";
intel_alm: DSP inference
2020-04-25 11:25:59 -05:00
parameter result_a_width = 36;
parameter operation_mode = "M18X18_FULL";
input [ax_width-1:0] ax;
input [ay_scan_in_width-1:0] ay;
output [result_a_width-1:0] resulta;
intel_alm: direct M10K instantiation This reverts commit a3a90f6377f251d3b6c5898eb1543f8832493bb8.
2020-07-26 13:28:10 -05:00
endmodule
(* blackbox *)
module cyclonev_ram_block(portaaddr, portadatain, portawe, portbaddr, portbdataout, portbre, clk0);
parameter operation_mode = "dual_port";
parameter logical_ram_name = "";
parameter port_a_address_width = 10;
parameter port_a_data_width = 10;
parameter port_a_logical_ram_depth = 1024;
parameter port_a_logical_ram_width = 10;
parameter port_a_first_address = 0;
parameter port_a_last_address = 1023;
parameter port_a_first_bit_number = 0;
parameter port_b_address_width = 10;
parameter port_b_data_width = 10;
parameter port_b_logical_ram_depth = 1024;
parameter port_b_logical_ram_width = 10;
parameter port_b_first_address = 0;
parameter port_b_last_address = 1023;
parameter port_b_first_bit_number = 0;
parameter port_b_address_clock = "clock0";
parameter port_b_read_enable_clock = "clock0";
parameter mem_init0 = "";
parameter mem_init1 = "";
parameter mem_init2 = "";
parameter mem_init3 = "";
parameter mem_init4 = "";
input [port_a_address_width-1:0] portaaddr;
input [port_b_address_width-1:0] portbaddr;
input [port_a_data_width-1:0] portadatain;
output [port_b_data_width-1:0] portbdataout;
input clk0, portawe, portbre;
endmodule
intel_alm: Add IO buffer insertion Signed-off-by: gatecat <gatecat@ds0.me>
2021-05-15 08:23:22 -05:00
(* blackbox *)
module cyclone10gx_io_ibuf(i, ibar, dynamicterminationcontrol, o);
parameter differential_mode ="false";
parameter bus_hold = "false";
parameter simulate_z_as = "Z";
parameter lpm_type = "cyclone10gx_io_ibuf";
(* iopad_external_pin *) input i;
(* iopad_external_pin *) input ibar;
input dynamicterminationcontrol;
output o;
endmodule
(* blackbox *)
module cyclone10gx_io_obuf(i, oe, dynamicterminationcontrol, seriesterminationcontrol, parallelterminationcontrol, devoe, o, obar);
parameter open_drain_output = "false";
parameter bus_hold = "false";
parameter shift_series_termination_control = "false";
parameter sim_dynamic_termination_control_is_connected = "false";
parameter lpm_type = "cyclone10gx_io_obuf";
input i;
input oe;
input devoe;
input dynamicterminationcontrol;
input [15:0] seriesterminationcontrol;
input [15:0] parallelterminationcontrol;
(* iopad_external_pin *) output o;
(* iopad_external_pin *) output obar;
endmodule
intel_alm: Add global buffer insertion Signed-off-by: gatecat <gatecat@ds0.me>
2021-05-15 08:34:48 -05:00
(* blackbox *)
module cyclonev_clkena(inclk, ena, enaout, outclk);
parameter clock_type = "auto";
parameter ena_register_mode = "always enabled";
parameter lpm_type = "cyclonev_clkena";
parameter ena_register_power_up = "high";
parameter disable_mode = "low";
parameter test_syn = "high";
input inclk;
input ena;
output enaout;
output outclk;
endmodule
(* blackbox *)
module cyclone10gx_clkena(inclk, ena, enaout, outclk);
parameter clock_type = "auto";
parameter ena_register_mode = "always enabled";
parameter lpm_type = "cyclone10gx_clkena";
parameter ena_register_power_up = "high";
parameter disable_mode = "low";
parameter test_syn = "high";
input inclk;
input ena;
output enaout;
output outclk;
endmodule
CycloneV: Add (passthrough) support for cyclonev_oscillator
2021-10-17 13:00:03 -05:00
// Internal interfaces
(* keep *)
module cyclonev_oscillator(oscena, clkout, clkout1);
input oscena;
output clkout;
output clkout1;
endmodule
CycloneV: Add (passthrough) support for cyclonev_hps_interface_mpu_general_purpose
2021-10-14 09:56:10 -05:00
// HPS interfaces
(* keep *)
module cyclonev_hps_interface_mpu_general_purpose(gp_in, gp_out);
CycloneV: Add (passthrough) support for cyclonev_oscillator
2021-10-17 13:00:03 -05:00
input [31:0] gp_in;
CycloneV: Add (passthrough) support for cyclonev_hps_interface_mpu_general_purpose
2021-10-14 09:56:10 -05:00
output [31:0] gp_out;
endmodule