* New: In EtesianEngine::flattenPower(), this is a duplication of the
KatanaEngine::PowerRails. The new paradigm is that when a Cell
is placed by etesian it's AbstractedSupply flag is set and the
creation of the abstract is taken care of at this point.
Should provide some speedup when Katana process it.
Note that we still need to keep PowerRails at Katana stage for
design that are loaded already placed (no Etesian run).
* New: In EtesianEngine::setPlaceArea(), as the slice spin is imposed
on us by Coloquinte, the bottom slice of the place area *must*
be on a ID oriented slice, that is an even one, relative to the
fully placed area.
* Bug: In EtesianEngine, remove the slice spin detection. The spin
is imposed on us by Coloquinte which always place the bottom
row in ID orientation.
Code should be completly removed in the future, along with
the obsolete AddFeeds (replaced by Placement).
* New: In CRL::RoutingLayerGauge, add a new kind of gauge "PowerSupply"
to flag a layer which is dedicated to routing power supplies.
* New: In AllianceFramework, add management of PowerSupply gauge kind.
Exported in the Python interface.
* New: In Query & QueryStack, add a new stop criterion "stopCellFlags"
based on the flags of the instances master cell. The instance will
still be processed, but not it's childs. Typically used to stop
exploring on "AbstractedSupply" cells.
Exported in the Python interface.
* New: In Cell::Flags, new value "AbstractedSupply" to mark Cells from
which an abstract has been built for supplies & blockages. But *not*
for common nets. Helps reduce the recursion through the hierarchy
when building supply line in FlattenPower.
Export setter/getter in the Python interface.
* New: In Instance, add a "PruneMaster" filter to stop hierarchical
exploration on instances which master cells have at least one of
the given flags set.
* Change: In NetExternalcomponents::isInternal(), use "const Component*"
instead of "Component*".
* Bug: In Cell::Flags, the NoFlags must be *zero*, not *one*! And we
can reclaim that bit for future use.
* Cleanup: In Hurricane::Cell, remove changeQuadTree() related methods.
Fusing various Cell's QuadTree is not a viable idea.
* Cleanup: In Hurricane::Instance, remove no longer used "_flags"
attributes.
* New: In cumulus/plugins.macro.macro.Macro() to encapsulate foreign blocks.
Round their size to an exact number of GCells and a guard of one GCell.
External terminal must be on the periphery and will be made to stick out
in the guard ring. This is sub-optimal for now but provide a workaround
some Katana bad assumptions.
A "perpandicular padding" is also added to terminals to limit the
offgrid related problems. Have to optimize that in conjuction with
Katana.
NOTE: To myself, one more bug uncovered in the Track segments management.
This is really too complex, must find time to re-think and simplify
the whole thing.
* New: In Katana::NegociateWidow::createTrackSegment(), detect offgrid
fixed segments and insert them into tracks directly (as *wide* segment
of two tracks).
* New: In Katana::TrackSegment::create() factory method, check for offgrid
fixed segment and use a TrackSegmentWide (of 2 tracks) for them.
* New: In Katana::TrackSegmentWide CTOR, check if they are used in the
context of an offgrid segment and in that case set the track span
to two. We *do not* manage yet the case for both *wide* and *offgrid*
segments.
* Change: In Katana::PowerRails::Rails::doLayout(), do not expand blockage
rectangles over their real size. Add the guard only for real layers
segments.
* Bug: In Katana::PreProcess::propagateCagedConstraints(), when looking
for the first track index, check for out of bound value (npos).
* Bug: In Katana::Track::addOverlapCost(), before using the overlap
segment indexes, check if we are not in a free hole (get the free
interval from center).
* Bug: In Katana::Track::expandFreeInterval(), the interval was badly
computed if it was included inside segments of another (same) net.
* New: In Anabatic::NetBuilder::_do_1G_1M3(), RoutingPad in METAL3 from
blocks are most likely to be offgrid in real mode, we must account
for that case. When an offgrid METAL3 is found, a strap of METAL2
is added, as it may be less than one pitch, it will be reduced into
METAL3 often.
* New: In Anabatic::NetBuilder::doRp_Access(), Support for offgrid METAL2
is added but not enabled yet. Seems to need more polishing.
* Change: In cumulus/plugins.block.Block.__init__(), assume that a block
is already built only if *all* it's instances are placed. Not some
of them.
* New: In cumulus/plugins/block/configuration, added support for a
placeArea parameter to restrict the placement area further than the
abutment box (see Etesian for the new feature).
* Change: In cumulus/plugins/CoreToChip, no longer adds I/O pads for
core signals that lacks one. Only issue an error message and
continue. More useful for debugging block support.
under the fixed segment, we were using the axis *of the segment*,
but if it is very wide, this is completly off.
Now use the axis of the *track* to get the right GCells impacteds.
* Bug: In KatanaEngine::annotateGlobalGraph(), overlapping blockages or
fixed segments where taken into account as separate ones. This was
making the edge capacity reservation too high. Creating false
zero-capacity edges at some points.
Didn't show up until now because we did not have overlaps.
* Bug: In Anabatic::GCell::updateDensity(), the GoStraight flag is now
set in this function when the density of blockage is above 40%.
(should be parametrized in the future). This is linked with the
Katabatic TrackFixedsegment bug.
* Bug: In Anabatic::GCell::Key::Compare, the densities of the GCell
where sorted in the *wrong* order, that is *less denser first*.
This was making the layer assignment working on it's head.
WTF, how did it ever work.
Also sort on global saturation.
* New: In EtesianEngine, add a "placedArea" attribute to restrict the
placement area to a part only of the whole abutement box. This a
way to exclude some area containing *big* hard block.
The placer terribly slow down when tring to "push aside" cells
from the area taken by the block.
This will be also used to restrict the clock tree covered area.
It is far from optimal but will do for now.
NOTE: The placeArea must be expressed in the coordinate system of
the sub-block to be placed, if one has been defined.
* Change: In Model::connectSubckts(), when trying to lookup the
Hurricane Net from it's Blif name, try first as a VHDL one then
after a Verilog to VHDL translation. Especially useful for bits
of vectorized names ("signal[X]" --> "signal(X)").
* Change: In EtesianEngine::globalPlace(), disable the call to
antennaProtect(). First reason is that, after all, Coloquinte
do not handle so well the resizing of the cells "on the fly",
it overspill the boundaries sometimes. Second reason is that
as we cannot know the routing tree at this stage, we will not
be able to choose the correct points for diode insertions.
We only have a Steiner tree wich may not be the same as a
density driven Dijkstra.
* Change: In Etesian::Area, the Occurrence to the Instances where
not stored in a uniform way. Some where starting from the
placed sub-block, some where starting from the top level
(corona), making their processing (and remembering it) tricky.
Now, they are all expressed from the top cell (corona).
The coordinate system is now systematically the one of the
top block (*not* the block).
Create various overloaded functions EtesianEngine::toCell()
and EtesianEngine::toBlock() to ease Occurrence & coordinate
translations.
* New: In Etesian::Slice::createDiodeUnder(), add a X position hint.
Search is done by going through the whole slice range and
minimizing the distance to the hint. If it starts to be too
slow, we may optimize.
* Bug: In EtesianEngine::toColoquinte(), the placement of the top
level external pins was not taken into account (this at last
explain their weird positioning).
* New: AnabaticEngine::antennaProtect(), new algorithm to avoid
antenna effect. This step must be done *after* global routing
and *before* detailed routing. This way we have access to the
real routing and can mend it (along with the netlist) to
insert diodes at the rigth points.
From the global routing we build clusters (DiodeCluster) of
RoutingPads connected through a set of wire whose total length
is below the antenna effect threshold. Long wires connecting the
clusters are also tagged because we need to put a diode between
them and the first RoutingPad of the cluster. This is to avoid
a long METAL2 wire connecting to the RoutingPad before the diode is
connected through METAL3 (in case of misalignment).
This protection is not even enough. For *very long* wires, we
needs to put *more* than one diode (this is to be implemented).
* New: In Etesian::Configuration add new parameters for antenna
effect management:
* "etesian.diodeName" : the name of the diode cell.
* "etesian.antennaMaxwl" : maximum length above which antenna
effect can occur. Must be the maximum for all the normal
routing layers.
* "etesian.antennaInsertThreshold" : during the placement steps,
threshold for linear disruption at which we will look for
the RSMT and insert diodes.
* New: In EtesianEngine::antennaProtect(), at a designated point
in the placement iteratives step, when the spreading starts to
be significant enough estimate the RSMT length and add a diode
if need be. The diode will be put side by side with the driver
cell. This is done by enlarging the driver cell of the diode
width.
* New: In EtesianEngine::_updatePlacement(), in the final stage,
modify the netlist to connect the diode. The diode will be
put on the side of the cell closest to the driver. This may
alow to make the connexion directly in METAL1 in the future.
* Change: In etesian/Placement.cpp, make the whole placement
structure a persistent attribute of the EtesianEngine so
it can be used afterwards.
Add a post-placement diode insertion feature. Finally
unused as they are added on the fly during placement.
In the Area, add data about the diode tie in the TieLut.
* Change: Add EtesianEnginea::clearColoquinte(), to keep the
post-placement structure while purging the Coloquinte one.
* Change: In cumulus/plugins.block.block, keep the Etesian engine
until the whole P&R is done, so we potentially can exploit
the post-placement datas.
* Bug: In cumulus/plugins.chip.power.GoCb(), for the METAL1 power
and ground wires coming from the standard cell, it was assumed
they where made of Horizontal segments, this is not the case
in FlexLib... So force to consider the plane as Horizontal when
we are processing that plane.
Better solution should be to use Horizontals...
The policy about how to create slots was not completly clear.
Now, only add *pointers* or *references* to class attributes,
never do a "copy by value". Reflect that change in SlotTemplate<>
various partial specializations.
Hammer in your head that in C++ functions templates do not allow
for partial specialization. So write only *one* template for
::getSlot<>() (refdefinition simply got ignoreds, at least with gcc).
* Bug: In Slot, only one template for getSlot<> (see above).
Adjust SlotTemplates<> to provides partial specialization only for:
* "const Data&".
* "Data*".
* "const Data*".
* "Data* const"
* "Record*".
* Bug: In Instance::_getRecord(), suppress slot based on transient
values "XCenter" & "YCenter".
* Bug: In CRL::ToolEngine::_getRecord(), suppress slot "Name" based
on a transient value.
* Change: In ::getRecord(std::list<Elementt>*) (and variant), pass
all elements to ::getSlot() as (const Element*).
* In CRL::GdsStream::operator<<(Cell*), when encountering an *external*
component, try to find a ".pin" layer associated (if not already
in it). Then drive the BOUNDARY & TEXT in it. This way, Cadence/
Calibre seems to be able to recognize them as Pin.
height is a multiple of sliceHeight. Otherwise, in some situations,
fixed cell may peek out of the placement area, triggering
Coloquinte assert (which says that the top of the cell is *above*
the top row).
* New: In cumulus/plugins.block.hfns4.py, perform simple HFNS by breaking
the net into sub-nets of at most 10 sinks (hard-coded for now).
As this method is called *after* the netlist as been virtually
flattened, we have to create the RoutingPad at the top level
ourselves. Sub-nets are created at the Cell top-level (same
approach as for clock synthesis, because there is no smart way
to guess where they should be).
* New: In cumulus/plugins.block.block.py, perform HFNS (#4) *before*
doing placement. To see the real sink count on each net, we must
perform the virtual net flattening first (Cell::flattenNets()).
* Change: In cumulus/plugins.block.configuration, allow the creation
of spare buffer in any cell (instead of only "self.cellPnR").
* Change: In cumulus/plugins.block.spares.Spares.raddTransNet(),
Check if intermediate masterNet exists in Cells before trying
to blindly re-create it.
* New: In Etesian/Placement::Area, added support to take into account
bulk inside cells. Currently only hard-wired configuration for
FlexLib is available. Should add a front-end to analyse the
cells of the library to lookup for bulk ties in the future.
* New: In CRL::GdsDriver, create TEXT record under each external
Net component. Seems to be the aknoweledged way to signal
external pins.
* New: In CRL::GdsParser, read TEXT record and create Net and
external components that are in the same layer and at the
same position.
* New: In Etesian::Configuration, added "etesian.lacthUpDistance" to
control tie cells insertion (for polarization contacts).
* New: Etesian/Placement as a complete replacement for FeedCells.
Rebuild the complete slicing structure of the placement to
serve as a building block for post-placement changes under
Coriolis. Currently used to regularly insert body ties.
This is not optimal as we displace cells in each slice in
a non-coordinated manner.
* New: In cumulus/plugins/block.configuration.FeedsConf, register
the "etesian.latchUpDistance" parameter. Provides the tie width.
* New: In cumulus/plugins.block.spares, add ties around the buffer
pool block and "cap ties" at both end of each slice.
* New: In cumulus/plugins.block.spares, added creation of vertical
stacks of feed cells, for their N/P tie contacts, to ensure
correct bulk polarization. Fail, because the placer cannot
cope with such massive obstacles, the vertical columns are
too close to manage.
* New: In cumulus/plugins.block.configuration, add support to
FeedsConf so lone instances can be created (for the first
bulk trial).
* New: In CRL/hepers, new function onFGrid() to ensure a DbU is on the
foundry grid. Rounding is always done to the inferior integer.
* New: In CRL/GdsDriver, added a set of isOnGrid() functions to check
that all coordinates of various objects are on the foundry grid.
Use isOnGrid() in most objects processed in
GdsStream::operator<<(Cell*).
* Bug: In cumulus/plugins.chip.pads.Corner, correctly round the
coordinates of the 45 degree segments so they are still on the
foundry grid.
* New: In cumulus/plugins.core2chip.libresocio.CoreToChip, use new
configuration variable "chip.useAbstractpads" to select between the
abstract version (GPIO, VDD, ...) and the full version (IOPadInOut,
IOPadVdd, ...) layout.
* New: In cumulus/plugins.chip.pads.Corona._createCorewire(), add an
hard-coded limitation for LibreSOCIO I/O pad to corona wires to
always be below the maximal threshold.
* Change: In cumulus/plugins.block.configuration.BlockConf.save(),
cumulus/plugins.block.Block.save(),
cumulus/plugins.chip.Chip.save(),
cumulus/plugins.core2chip.core2chip.CoreToChip.buildChip(),
Add a "flags" parameter to control the way logical views (aka "vst")
are saved. Mainly allowing to pass on the VstUseConcat option in
order for Alliance tools to be able to read them back (lvx, asimut).
* Change: In cumulus/plugins.core2chip.core2chip.CoreToChip.buildChip(),
don't stop at the first I/O pad signal missing on the core, but
display all the missing ones (LKCL proposal).
* In cumulus/block.configuration, the rsave method was buggy. It did stop
it did not save "terminal" master cells (i.e. a cell without instance)
instead of "netlistTerminal" (explicitely flagged for standard cells).
The result was that some "empty netlist" in the complete "ls180"
from LibreSOC went missing. Causing cougar to complain.
* Change: In CRL::Model::staticInit(), when trying to guess the ouput
of the tie low & tie high cells check if the net name is not a
power or ground. A bad input was choosen with FlexLib as the
vdd/vss nets where not typed as POWER/GROUND.
* Change: In Hurricane::QuadTree_GosUnder::Locator::progress(), directly
prune the elements which sizes are under the threshold. This allows
the too small Instances to be directly skipped. This was the key
point slowing the walktrough. We were systematically going through
all the instances (that is consistent with the perf traces).
* Change: In Hurricane::Cell_OccurrencesUnder, add a threshold parameter
to pass on the QuadTree (through getInstancesUnder()).
Needed for the CellWidget selection to have the same problem as
the display itself (select only what is displayed).
* New: In Hurricane::CellView, add two new parameters:
1. "viewer.minimumSize" set the original size of the window, in pixels.
(doubled for HiDPI).
2. "viewer.pixelThreshold", the size, in pixels, under which
components/instances will not be displayeds.
* New: In CRL/etc/cmos.misc.py, added parameters "viewer.minimumSize"
and "viewer.pixelsThreshold".
* Change: In Hurricane::Contact, as it is the base class of Pin, a
width *or* height can rightfully be null (according to the
Pin orientation).
Put the check in a Contact::_postCheck() function.
* Change: In Hurricane::Contact, replace all the "const DbU::Unit&"
parameters by simply "DbU::Unit".
* Change: In Hurricane::Pin, add a dedicated _postCheck() function.
Jean-Paul Chaput