* New: In Etesian::Configuration add new parameters for antenna
effect management:
* "etesian.diodeName" : the name of the diode cell.
* "etesian.antennaMaxwl" : maximum length above which antenna
effect can occur. Must be the maximum for all the normal
routing layers.
* "etesian.antennaInsertThreshold" : during the placement steps,
threshold for linear disruption at which we will look for
the RSMT and insert diodes.
* New: In EtesianEngine::antennaProtect(), at a designated point
in the placement iteratives step, when the spreading starts to
be significant enough estimate the RSMT length and add a diode
if need be. The diode will be put side by side with the driver
cell. This is done by enlarging the driver cell of the diode
width.
* New: In EtesianEngine::_updatePlacement(), in the final stage,
modify the netlist to connect the diode. The diode will be
put on the side of the cell closest to the driver. This may
alow to make the connexion directly in METAL1 in the future.
* Change: In etesian/Placement.cpp, make the whole placement
structure a persistent attribute of the EtesianEngine so
it can be used afterwards.
Add a post-placement diode insertion feature. Finally
unused as they are added on the fly during placement.
In the Area, add data about the diode tie in the TieLut.
* Change: Add EtesianEnginea::clearColoquinte(), to keep the
post-placement structure while purging the Coloquinte one.
* Change: In cumulus/plugins.block.block, keep the Etesian engine
until the whole P&R is done, so we potentially can exploit
the post-placement datas.
* Bug: In cumulus/plugins.chip.power.GoCb(), for the METAL1 power
and ground wires coming from the standard cell, it was assumed
they where made of Horizontal segments, this is not the case
in FlexLib... So force to consider the plane as Horizontal when
we are processing that plane.
Better solution should be to use Horizontals...
height is a multiple of sliceHeight. Otherwise, in some situations,
fixed cell may peek out of the placement area, triggering
Coloquinte assert (which says that the top of the cell is *above*
the top row).
* New: In cumulus/plugins.block.hfns4.py, perform simple HFNS by breaking
the net into sub-nets of at most 10 sinks (hard-coded for now).
As this method is called *after* the netlist as been virtually
flattened, we have to create the RoutingPad at the top level
ourselves. Sub-nets are created at the Cell top-level (same
approach as for clock synthesis, because there is no smart way
to guess where they should be).
* New: In cumulus/plugins.block.block.py, perform HFNS (#4) *before*
doing placement. To see the real sink count on each net, we must
perform the virtual net flattening first (Cell::flattenNets()).
* Change: In cumulus/plugins.block.configuration, allow the creation
of spare buffer in any cell (instead of only "self.cellPnR").
* Change: In cumulus/plugins.block.spares.Spares.raddTransNet(),
Check if intermediate masterNet exists in Cells before trying
to blindly re-create it.
* New: In Etesian::Configuration, added "etesian.lacthUpDistance" to
control tie cells insertion (for polarization contacts).
* New: Etesian/Placement as a complete replacement for FeedCells.
Rebuild the complete slicing structure of the placement to
serve as a building block for post-placement changes under
Coriolis. Currently used to regularly insert body ties.
This is not optimal as we displace cells in each slice in
a non-coordinated manner.
* New: In cumulus/plugins/block.configuration.FeedsConf, register
the "etesian.latchUpDistance" parameter. Provides the tie width.
* New: In cumulus/plugins.block.spares, add ties around the buffer
pool block and "cap ties" at both end of each slice.
* New: In cumulus/plugins.block.spares, added creation of vertical
stacks of feed cells, for their N/P tie contacts, to ensure
correct bulk polarization. Fail, because the placer cannot
cope with such massive obstacles, the vertical columns are
too close to manage.
* New: In cumulus/plugins.block.configuration, add support to
FeedsConf so lone instances can be created (for the first
bulk trial).
* New: In CRL/hepers, new function onFGrid() to ensure a DbU is on the
foundry grid. Rounding is always done to the inferior integer.
* New: In CRL/GdsDriver, added a set of isOnGrid() functions to check
that all coordinates of various objects are on the foundry grid.
Use isOnGrid() in most objects processed in
GdsStream::operator<<(Cell*).
* Bug: In cumulus/plugins.chip.pads.Corner, correctly round the
coordinates of the 45 degree segments so they are still on the
foundry grid.
* New: In cumulus/plugins.core2chip.libresocio.CoreToChip, use new
configuration variable "chip.useAbstractpads" to select between the
abstract version (GPIO, VDD, ...) and the full version (IOPadInOut,
IOPadVdd, ...) layout.
* New: In cumulus/plugins.chip.pads.Corona._createCorewire(), add an
hard-coded limitation for LibreSOCIO I/O pad to corona wires to
always be below the maximal threshold.
* Change: In cumulus/plugins.block.configuration.BlockConf.save(),
cumulus/plugins.block.Block.save(),
cumulus/plugins.chip.Chip.save(),
cumulus/plugins.core2chip.core2chip.CoreToChip.buildChip(),
Add a "flags" parameter to control the way logical views (aka "vst")
are saved. Mainly allowing to pass on the VstUseConcat option in
order for Alliance tools to be able to read them back (lvx, asimut).
* Change: In cumulus/plugins.core2chip.core2chip.CoreToChip.buildChip(),
don't stop at the first I/O pad signal missing on the core, but
display all the missing ones (LKCL proposal).
* In cumulus/block.configuration, the rsave method was buggy. It did stop
it did not save "terminal" master cells (i.e. a cell without instance)
instead of "netlistTerminal" (explicitely flagged for standard cells).
The result was that some "empty netlist" in the complete "ls180"
from LibreSOC went missing. Causing cougar to complain.
* New: In cumulus/plugins.blocks.iospecs.IoSpecs, new class to manage
I/O pads placement. Support for reading the JSON pinmux format
(courtesy of LKCL & StackOverflow).
* Change: In cumulus/plugins.block.bigvia.BigVia, center the VIA cut
matrix. Issue a BIG warning when no one cut could be drawn
(temporarily disabled until I fix the corona).
Integrate new features and bug fixes so the Arlet 6502 benchs successfully
passes real DRC with reference industrial tools. Short summary:
* Manage minimum area for VIAs in Katana::Tracks.
* Allow different wire width for wires perpandicular to the prefered
routing direction.
* StackedVIAs used in the clock tree no longer assume an uniform
routing grid (same offset & pitch all the way up).
* Some hard-coded patches in PowerRails for FlexLib.
* New: In CRL/symbolic/cmos/kite.py & cmos45/kite.py, update the
RoutingLayerGauges by adding the new PWireWidth parameter.
Always zero in case of symbolic layout (too fine tuning).
* New: In CRL::RoutingGauge, add accessor to PWireWidth parameter.
Modify the clone method.
* New: In CRL::RoutingLayerGauge, add new parameter "PWireWidth"
to give the width of a wire when it not drawn in the prefered
routing direction. If it is set to zero, the normal width is
used.
* New: In CRL::PyRoutingGauge, export the updated constructor
interface. It is *not* backward compatible, one must add the
PWireWidth parameter in the various kite.py configuration
files (in etc/).
* Change: In AnabaticEngine::_gutAnabatic(), disable the minimum
area detection mechanism, replaced by a more complete one in
Katana::Track. Left commented out for now, but will be removed
in the future.
* Change: In Anabatic::AutoContact::updateLayer(), now systematically
calls setLayerAndWidth() to potentially resize the VIAs. This is
needed in real mode as VIAs are *not* macro-generated but have
their real final size.
* Change: In Anabatic::AutoContact::setLayerAndWidth(), select the
width and height of the contact using the gauge wire width *and*
perpandicular *wire width*.
* Change: In Anabatic::AutoSegment::_initialize(), the "VIA to same cap"
to PWireWidth/2, this will be the size of the VIA in the
non-preferred direction at the end cap (non-square in real mode).
* Change: In Anabatic::AutoSegment::getExtensionCap(), makes different
cases for symbolic and real. Use raw length in real, add half the
wire width in symbolic.
Add a flag to get the extension cap *only*, not increased of
half the minimal spacing.
* Change: In Anabatic::AutoSegment::bloatStackedStrap(), enhanced,
but finally unused...
* New: In Anabatic::AutoSegment::create(), use the PWireWidth when
the segment is not in the preferred routing direction (and of
minimal width).
* New: In Anabatic::Configuration, add new getPWirewidth(),
DPHorizontalWidth() and DPVerticalWidth() accessors.
* Change: In AnabaticEngine::setupPreRouteds(), skip components in
in "cut" material. We are only interested in objects containing
some metal (happens in real mode when VIAs cuts are really there).
* New: In Katana::PowerRailsPlanes::Rail::doLayout(), add an hard-coded
patch that artificially enlarge the *wide wire* so the spacing for
wide wire is enforced. For now, two pitches on each side for
"FlexLib" gauge.
* New: In Katana::Track, add support to find and correct small wire
chunks so they respect the minimum area rules.
Two helper functions:
* ::hasSameLayerTurn(), to find if a a TrackElement as non-zero length
perpandicular is same layer connected to it.
* ::toFoundryGrid(), to ensure that all coordinates will be on the
foundry grid (may move in a more shared location).
* ::expandToMinArea(), try to expand, *in the routing direction*
the too small wire so it respect the minimal area. Check for the
free space in the track.
Track::minExpandArea() go through all the TrackElements in the track
to look for too small ones and correct them.
* Change: In Katana::RoutingPlane, add an accessor to get the tracks.
* New: In KatanaEngine::finalizeLayout(), add a post-treatment to find
for minimal area violations.
* Change: In cumulus/plugins.block.configuration.GaugeConf, add a
routingBb attribute that will serve as a common reference to all
the functions calculation track positions. We must not have two
different reference for the core and the corona. The reference
is always the corona when we working on a complete chip.
* New: In cumulus/plugins.block.configuration.GaugeConf.getTrack(),
Simplified and more reliable way of getting tracks positions.
Use the routingBb.
* New: In cumulus/plugins.block.configuration.GaugeConf.rpAccess(),
Make use of getTrack() to get every metal strap on the right
X/Y position.
* New: In cumulus/plugins.block.configuration.GaugeConf.expandMinArea(),
As those wires are left alone by the router, it is our responsability
to abide by the minimal area rule here. Hence the code duplication
from the router (bad).
Mainly wires made for the clock tree, I mean.
* Bug: In cumulus/plugins.chip.configuration.ChipConf.setupICore(),
the core instance must be placed on the GCell grid, defined by the
slice height (X *and* Y).
* Bug: In cumulus/plugins.chip.corona.Builder(), forgot to use bigvia
for the corners of the inner ring.
* Bug: In cumulus/plugins.chip.pads.corona._createCoreWire(), hard-coded
patch for LibreSOCIO, the power/ground connectors toward the core
are too wide and can create DRC errors when put side by side.
Shrink them by the minimal distance.
* New: In cumulus/plugins/chip.corona.HorizontalRail & VerticalRail,
use the new BigVia instead of StackVia to generate a matrix of
cut when in real mode. Stick to the one massive VIA when in
symbolic.
* New: In cumulus/plugins/block.bigvia.BigVia to generate matrixes
of cut VIA.
* New: In cumulus/plugins.block.configuration, added class ConstantsConf
to store information and create instances of "zero" and "one" cells.
Added attribute in BlockConf class.
* Change: In cumulus/plugins.block.configuration, moved the cell cloning
and saving from block.spares.Spares to configuration.BlockConf as
it is a service that can be used by other modules than just spares.
Other modules may modificate the netlists also, like in XXXX.
* Change: In cumulus/plugins.chip.configuration, in various methods,
manage both cases when the layer is symbolic or real (difference
in accessing the underlying BasicLayers).
* Change: In cumulus/plugins.chip.configuration, less clutered display
of lambda length in trace mode (and use of 'L' as 'l' was too close
to '1').
* Bug: In cumulus/plugins.chip.corona.VerticalSide.addBlockages(),
as the clock are now on the *inner* rail(s), blockage must be on
the *outer* rails (power lines).
* New: In cumulus/plugins.chip.pads.Corner, add support for 45 degree
corners (cfg setting "chip.use45corners").
* New: In cumulus/plugins.chip.pads.Side.check(), correct computation
of the side's length. Was using the ioPadStep instead of the pad
cell width!
* Change: In cumulus/plugins.chip.pads.Corona._padAnalysis(), LibreSOCIO
pads uses Verticals for their ring wires (common sense would want
them *Horizontal*). So they must be included in the physical pin
detection, but in turn this cause havoc in pxlib... So create a
filtering according to the library name. This is *not* robust
but will do for now.
* New: In cumulus/plugins.chip.pad.core2chip.CoreToChip, rename
self.state into self.conf for clarity.
New method newEnableForNet(), to create "enable" nets on the
fly for emulated In/Out pads.
As it can edit the netlist (new "enable" nets) call the
BlockConf.rsave() method instead of direct saving through
AllianceFramework.
Raise NotImplementederror instead of ErrorMessage.
* New: In cumulus/plugins.chip.pad.core2chip.IoPad.createPad(),
on emulated In/Out I/O pad like for LibreSOC, generate on the fly
the right enable signal.
If an enable signal is given, it will be used (backward
compatible with the previous behavior).
* New: In cumulus/plugins.chip.pad.core2chip, support for real
LibreSOCIO pads in libresocio.py module.
* New: In cumulus/plugins/core2chip/, support for the FlexLib I/O cells
symbolic abstracts ("niolib"). More flexible way of specifying the
number and positions of the various power pads, both I/O power and
core power.
For niolib (FlexLib I/O abstract), support for multiple clocks,
that is, clock become ordinary pad (with signals typed as CLOCK).
* New: In cumulus/plugins/chip/, added support for niolib and final
integration of multiple clocks (only for niolib).
Note: The previous strategy was not fully coherent in chip mode.
Everything added, net and components must be added at
corona level and not separated between corona and core.
* New: In cumulus/plugins/block.configuration, new FeedsConf object
to handle the feeds and provide a filling area helper.
* New: In cumulus/plugins/block.spares.removeUnusedbuffers() to
remove unused buffers in the pools and replace them by feedthrough.
* Change: In cumulus/plugins.block.spares, unify coordinate/slice
computation. If we are in chip mode, the coordinates are
expressed in the corona *but* aligned on the slices of the
*core* model.
* Change: In cumulus/plugins.block.Block.rsave(), add the '_r' suffix
to the routed cells.
* Change: In cumulus/plugins.clocktree.ClockTree, when in chip mode
create everything at corona level. Also forgot to set type of
clock subnet as clock.
* Change: In Cumulus/plugins/block/spares, check that "block.spareSide"
is not below 7*sliceHeight and issue a warning instead of a later
divide by zero...
Note: The port is not complete. Integration of LKCL patches will
follow shortly.
* Change: In cumulus/plugins/alpha/block, more simple inheritance
scheme. Use classic inheritance instead of @classdecorator.
BlockConf (renamed from BlockState) now inherit from GaugeConf,
Double inheritance tree, for Block/Chip and BlockConf/ChipConf.
Allow an uniform syntax for configuration parameters.
* New: In cumulus/plugins/alpha/chip, port of the chip plugin and
integrate with the block plugin. It is now a derived class of
Block. ChipConf is also a derived from BlockConf.
Obsolete "./coriolis2/ioring.py", all informations are given
though the ChipConf state class.
* New: In cumulus/plugins/alpha/core2chip, only Alliance/pxlib is
ported yet.
* New: In CRL/helpers/utils.py, create a Python "class decorator".
Works like a decorator but without the need of implementing
the Concrete/Abstract classes structure Design Pattern.
Create proxies in the derived class for the base class
attributes & methods.
* Change: In cumulus/plugins/alpha/block/configuration.py, enrich
the BlockState object to support core2chip parameters. Make it
even more autonomous from the Block class.
* New: In cumulus/plugins/alpha/core2chip, port of the core2chip plugin
and integration with the alphs/block plugin. At "constant features"
as a first. Only ported "cmos", phlib will be later.
Note: Keep the various hfnsX.py as toolboxes for future experiments.
* New: cumulus/plugins/block/hfns3.py, build the trunk of the
net as a RMST. First with the "Iterative One Steiner Point"
(terribly slow above 100 points) then with FLUTE.
For the global routing trunk, must be very cautious to
check that the cluster "graph point" is the one of the
it's buffer RoutingPad so both end up in the same GCell.
* New: cumulus/plugins/block/timing.py, stub for basic
timing computation and conversion between sink and
capacitance. Currently based on the fake 350nm given as
example in SxLib ("man sxlib"...).
To perform HFNS, recursively makes clusters of closest sinks, less than
30 sinks and with a control of the half-perimeter at all the clusters
levels. Clearly needs lots of improvements but the backbone of the
feature works. Make use of the pool buffers as do the clock tree.
Clustering is done with a degenerated Kruskal algorithm.
This is rougly based on the article:
Buffered Steiner Trees for Difficult Instances
Charles J. Alpert, Member, IEEE
IEEE TCAD, Vol. 21, No. 1, January 2002
0278–0070/02$17.00 (c) 2002 IEEE
* Bug: In cumulus/plugins/alpha/block/clocktree.ClockTree.splitClock(),
forgot to wrap inside an UpdateSession.
* Bug: In cumulus/plugins/alpha/block/clocktree.spares.raddTransNet(),
forgot to set the masterNet for recursive call when the plug already
exists.
* New: Added multiple clock support in H-Tree generation in alpha/block.
* New: In CRL/etc/<NODE>/<TECH>/plugins.py, added three new parameters
for block plugin config:
"block.spareSide" : The size of the minimum side of a buffered area.
(quad-tree leaf).
"spare.buffer" : The model of the cell buffer to be used.
"spare.maxSinks" : max number of sinks on a buffer before issuing
a warning (non-blocking).
* Bug: In Etesian::BloatCell::getAb(), never apply the bloat profile to
fixed cells. In case of buffers from the spare maxtrix it was leading
Coloquinte to detect an overlap of fixed cells, which it do not
support (rightly so).
* Bug: In cumulus/plugins/block/block.py, when a block is found to have
a layout, that is, is already placed & routed, it's instances must
be flagged as FIXED instead or PLACED so Etesian will really sees
them as unmovable and don't account them to be placed.
* Bug: In cumulus/plugins/rsave.py, use "Cell.isTerminalNetlist()"
instead of "Cell.isTerminal()" to find the hierarchical stop
points.
If the root cell to be saved is itself a *terminal netlist*
one, save it anyway. The top level *must* be saved regardless to
it's status.
* New: In CRL::NamingScheme, add a flag VstNoLowerCase, and its
management it in the Verilog to VHDL converter.
* Change: In CRL::BlifParser::Model::toVhdlModels(), disable the
lowercasing of identifiers. We shouldn't apply Alliance VHDL
subset constraits when reading blif files. So we will see
uppercase identifiers in Coriolis.
* Change: In CRL::VstParser, no longer lowercase identifiers that
are *not* VHDL keywords. Uppercases are legals in VHDL...
* New: In CRL::Catalog::State, add a new flag VstNoLowerCase to
tell if the VST driver should keep the uppercases.
* Change: In CRL::VhdlEntity, add a VstNolowerCase flag to disable
the lowercasing.
* Change: In CRL::vstDriver, lower case the file name if needed.
remove the previously opened filename if it differs from the
lowercased one.
* Change: In UnicornGui CTOR, disable VHDL enforcement for the
Blif parser.
* In cumulus.plugins.matrixplacer.py, BETA plugins for getting back
matrix-like netlists placement. This plugin is configured *ONLY*
for Libre-SOC FU-FU matrix 30x30.
* Change: In CRL::LefParser::_macroCbk(), create a Catalog entry for the
newly read MACRO (that is Cell) and sets the Logical, Physical,
InMemory and TerminalNetlist flags.
* Bug: In CRL::LefParser::_siteCbk(), check for NULL cell gauge.
* New: In CRL::AllianceFramework, add setCellGauge(), to set the default
cell gauge. Exported to Python.
* Change: In CRL/etc/common/technology.py, create variables for VIA
layers, so we can modify their properties afterwards.
* New: In CRL/etc/node45/freepdk45, port the configuration files to the
new Python "importable" format.
Note: in kite.py, all the gauges (Routing & Cells) must be named
"LEF.CoreSite" to please my LEF parser, so it can match the gauge
name with the SITE name for standard cells.
* Bug: In Anabatic::NetBuilderVH::_do_2G(), forgotten to be reimplemented
from the base class. Simply redirect to _do_xG().
* Change: In Katana::PowerRailsPlanes::PowerRailsplanes(), create plane
from the layers in the RoutingGauge and their associated blockages
instead of sweeping through all the basic layers.
Allow to distinguish bewteen "METAL" (symbolic) and "metal" (real).
* Change: In CRL/helpers, cumulus/plugins, oroshi & karakaze,
Move towards more Python PEP8 compliance:
* All indentations sets to 4 spaces (in progress).
* In plugins, remove messages about software collections
and RHEL (too many case could wrongly lead to that).
Instead systematically uses "helpers.io.catch()".
* Put in lowercases all modules names. Note that C++ exported
modules *keep* their Capitalized names (to preserve the
identity with the C++ namespace).
* When making import, use full path.
* Rename the run function from "ScriptMain()" to "scriptMain()".
* Cleanup: In CRL/etc, remove obsoleted configuration files,
the one ending in ".conf". Keep those who have not been ported
to the new style yet.
* New: In Hurricane/src/configuration, first trial at replacing the
C preprocessor macros by C++ templates. Applied first to configuration
from VLSISAPD.
This is unfinished business, just a limited demonstrator for now.
It is installed as a separate Python library "Cfg2" which do not
interact with the rest of Coriiolis.
The end goal is to fully remove boost and merge VLSISAPD useful
components directly inside Hurricane.
In the Cell/Instance hierarchy, the "terminal" and "leaf cell" concepts
where not clearly defined and partially overlapping. Now, "Terminal" is
the refer to the physical hierarchy (layout) and "TerminalNetlist" to
the logical hierarchy (netlist). The logical hierarchy can be less deep
than the physical one thanks to a Cell dedicated cell flags. Collections
related to the physical hierarchy keep their old names, the one related
to the logical hierarchy are renamed from "Leaf" to "TerminalNetlist".
The name "Leaf" was too ambiguous (leaf for *what* hierarchy).
* Change: In Hurricane::Device, set the "TerminalNetlist" flag once and
for all. No need set it in all the derived classes again.
* New: In Hurricane::MultiCapacitor, added new parameter "dummy" to
create dummies around the capacity matrix.
* Change: In Hurricane::Cell, remove "Leaf" related methods, replace
them by "TerminalNetlist" one, especially Collections. Now we have
two clear sets of Collections to walkthough the layout or the
netlist.
Change the "Terminal" flag into "TerminalNetlist".
* Change: In Hurricane::CellCollections, rename "Leaf" into
"TerminalNetlist" collections and apply the new semantic to the
locators.
* Change: In Hurricane::DataBase, Leaf to TerminalInstance renaming.
* Change: In Hurricane::DeepNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::HyperNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Instance, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Viewer::HierarchyInformations, Leaf to
TerminalInstance renaming.
* Change: In CRL::AllianceFramework, Leaf to TerminalInstance renaming.
* Change: In CRL::Catalog, Leaf to TerminalInstance renaming.
* Change: In CRL::ApParser, Leaf to TerminalInstance renaming.
* Change: In EtesianEngine::AddFeeds, Leaf to TerminalInstance renaming.
* Bug: In EtesianEngine::resetPlacement, move there the loop over
non terminal netlist instances to flag fully placed sub-blocks
as terminal for the netlist. Only then remove the feed cells
from unplaced instances. Previously, the feed cells where stripped
even from already placed instances.
* Change: In Katana, Leaf to TerminalInstance renaming.
* Bug: In Bora::PyDSlicingNode, allow the range parameter to be the
Python None object when we do not want to pass one but need to
have it as positional parameter.
* Change: In Cumulus/clocktree/ClockTree.py, Leaf to TerminalInstance
renaming.
* New: In CRL/etc/node600/phenitec, ported configuration of Phenitec 0.6um
Compliant with DataBase reset.
* New: In CRL/python/helpers, added function "unloadUserSettings()" to
unload Python modules prior to a full reset.
Added "resetCoriolis()" to perform full DataBase reset.
* Change: In CRL::AllianceFramework, make it a derived class of DBo so
the destroy() is now provided.
* Bug: In CRL::AllianceFramework::getCell(), do not attempt any load if
the library list is empty. Should never occur except in case of a
botched databse reset.
* New: In CRL::AllianceFramework, new method "saveCATAL()" to write back
the catalog of a library and "saveCells()" to write back the cells.
Note: only cells actually loaded in memory will be write back.
* New: In CRL::Catalog, add method "saveToFile()" to write back the CATAL
of a library.
* Change: In CRL::ParserDriver, replace "const string&" by "string"
(improved string support of the GNU STL).
* Change: In CRL::ParserSlot, use string instead of Name.
* Change: In CRL::ApParser, make _layerInformation an ordinary attribute
instead of a static one. This allow for it's correct resetting
across databas resets.
* Change: In CRL::VstParserGrammar, reinitialize Vst::framework at each
parser call. Needed to support database reset.
* New: In Hurricane::DBo, add an object counter to be sure that when
we perform a reset, no remaining DBo is allocated. This is different
of the object id which is ever increasing.
Note that, at reset, we check against "1" remaining element as at
this point only Database is still allocated.
Add a new "resetId()" method. MUST NEVER BE CALLED except by
DataBase::_preDestroy().
* New: In Hurricane::Database, new clear() method to remove the Cells
of all the libraries in reverse hierarchical depth order.
Make use of the new CellsSort class.
* Change: In Hurricane::DataBase::_preDestroy(), call "clear()" and
DBo::resetId().
* Change: In Hurricane::Breakpoint, change the default callback to be
a static function. So we can restore it later.
* Bug: In Hurricane::Instance::_preDestroy(), there was yet another
loop of deletion over a collection for the shared pathes.
Replace it by the repetitive deletion of the first element.
* Bug: In Hurricane::Net::_preDestroy(), RoutingPads must be destroyed
prior to any other component.
* New: In Hurricane::ColorScale, add a "qtFree()" method for freeing
the Qt Brush, Pen & Color.
* New: In Hurricane::DrawingStyle, add a "qtFree()" method for freeing
the Qt Brush, Pen & Color.
* New: In Hurricane::Graphics, add a "disable()" method to call the
various "qtFree()" of the sub-objects.
* Change: In Hurricane::Viewer::ExceptionWidget & CRL/python/helpers/io.py,
downscale icons for non-HiDPI screen.
* Change: In CRL/etc/common/display.py, change the display threshold of
METAL1 layer so it do not appear at high scaling.
* New: In Etesian, activate the "setFixedAbHeight()" feature and export it
to Python. Allows to increase the space margin at constant height.
To be used by the P&R conductor.
* Change: In Unicorn/cgt.py, when running a script, insert the current
working directory at head of the sys.path, not at the end. So installed
modules do not shadow local one.
* New: In Anabatic::Edge, new accessor "getRawcapacity()" to know the full
capacity of the edge, that is, the real maximum number of tracks that
can go through the associated side.
* Change: In Katana/BloatProfile/Slice::tagsOverloaded(), bloating policy
change, now bloat all the instances under the GCell, not only the first
one.
* Change: In KatanaEngine::runGlobalRouter(), restore the search halo growth
policy to expanding of 3 GCells every 3 iterations.
New metrics displayed, the edge wire length length overload.
* Change: In cumulus/plugins/ConductorPlugin.py, now accepts the following
configuration parameters:
- "anabatic.globalIterationsEstimate", maximum number of global
iterations during the bloating computation passes.
- "conductor.useFixedAbHeight", tells wether the additionnal blank
space must be added so the aspect ratio is kept or the height is
kept (and the block become wider).
Disable the display of "rubber" to unclutter a little the view.
* Bug: In Katana::BloatProfile::FlatInstance for X & Y calculation of
flattened instances reserse the order of transformation. We must apply
the occurrence path transformation to the instance transformation,
and not the other way around.
Was causing the bug in SNX example.
* Bug: In Katana::BloatProfile::Slice::tagOverloadeds(), the underlying
Gcell was not kept in synch with the instance. This was causing a right
shift of the bloated area.
* New: In Katana::BloatProfile, add the selection of overloaded edges and
failed nets.
Add a flag to KatanaEngine::runGlobalrouter() to choose what failed/
overloaded components to display (selectors).
This commit contains two set of features that should have been commited
separately.
1. Compliance with clang 5.0.1, tested with the RedHat collection
llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS)
with Xcode & macports. The bootstrap install system has been modificated
accordingly.
2. The basic support for routing density driven placement. Related
features are:
* Bloat property. Each Occurrence of an Instance can be individually
bloated. This property not attached to any tool to allow the placer and
router to share it as wanted. Nevertheless, it is defined in Etesian.
* BloatProfile in Katana, add individual Bloat properties to Instances
occurrences based on the East & North overflowed edges of each GCell.
* Support in ToolEngine for a "pass number" of a tool. This pass number
is mainly used to make "per pass" measurements. The MeasureSet system
is improved accordingly to support multiple values of a same measure.
* Embryo of "P&R Conductor" to perform the place & route loop until the
design is successfully placed. May be the first brick of a Silicon
Compiler.
* Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to
the python component for macport (ex: python27).
* Change: In boostrap/build.conf, put etesian before anabatic for
instance occurrence BloatProperty dependency.
Added option support for the "llvm-toolset-7" collection to build
against clang 5.0.1.
* Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates
for first & second arguments must be called with <const T> and <const U>
as the pair itself is const (and not simply <T> & <U>).
* Change: In Hurricane::getSlot() temlate, only use "string" arguments and
not const string&, simpler for template argument deduction.
* Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<>
template has a static member "_name". Clang did show that the template
for this static number has to be put inside the namespace where the
template *is defined* (i.e. Hurricane) instead of the namespace where
it is instanciated (i.e. Analog).
* Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must
be put outside the C linkage back in the Isobar C++ namespace (clang).
* Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification
(clang).
* Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change
signature so it matches the one of the base class (clang).
* Bug: In Hurricane::CellPrinter, use double brackets for initializer list
(clang).
* Change: In Hurricane::Breakpoint, reverse the meaning of the error level.
Only error level *lesser or equal* than the stop level will be enabled.
* Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the
current working directory in the sys.path as in certain configuration
it may not be included.
* Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when
encountering a RoutingPad on a top-level Pin Occurrence. The segment
was generated in the wrong direction, creating DRC violations on the
"mips_core_flat" example.
* Change: In CRL::Measures, partial re-design of the measurements management.
Now, each kind of measure can accept multiple values put in a vector.
The index is intented to match a tool run number.
* Change: In CRL::Histogram, add support for multiple sets of datas,
indexeds with tool run number.
* Change: In CRL::ToolEngine, add support for multiple pass number, add
addMeasure<> templates for the various data-types.
* Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record
name constants.
* New: Etesian::BloatProperty, property to attach to Instance occurrences
that contains the extra number of pitch to add to the cell width.
* Bug: In AutoSegment::CompareByDepthLength, the segment length comparison
was wrong, it was always returning true, which broke the "strick weak
ordering" of the comparison.
This was producing a core-dump in GCell::updateDensity() when sorting
a vector<>. The end() iterator was being dereferenced, leading to the
problem.
* Bug: In Katana::DataSymmetric::checkPairing(), the test for segments
whose axis is perpandicular to the symmetry axis was wrong
("!=" instead of "-").
* New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells()
and selectBloatedInstances() to automatically select segments from
overloaded edges, overloaded GCells and bloated cells.
* Change: In KatanaEngine, return a more detailed success state, distinguish
between global and detailed.
Add support for multiple routing iterations.
* New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing
driven placement.
* In CRL::Cyclop/CMakeLists.txt, add *again* the MOC files to the list
of .cpp . Don't know what is happening here with MOC under Qt 5.
* In CRL/python/helpers.io, cleanly fails if neither PyQt 4 nor PyQt 5 is
found. And tell it directly because this the module tasked to handle
the exceptions/errors...
* In Cumulus/plugins/AboutWindow.py, try PyQt 4 then PyQt 5.
* In documentation/UsersGuide, now tells explicitely that Qt 4 must be
used under RedHat 7 and Qt 5 under Debian.
* New: In bootstrap/coriolisEnv.py, add the "etc" directory to the
PYTHONPATH as initialization are now Python modules.
* New: In Hurricane/analogic, first groundwork for the integration of
PIP/MIM/MOM multi-capacitors. Add C++ and Python interface for the
allocation matrix and the list of capacities values.
* Change: In Hurricane::RegularLayer, add a layer parameter to the
constructor so the association between the RegularLayer and it's
BasicLayer can readily be done.
* Change: In Hurricane::Layer, add a new getCut() accessor to get the
cut layer in ViaLayer.
* Change: In Hurricane::DataBase::get(), the Python wrapper should no
longer consider an error if the data-base has not been created yet.
Just return None.
* Bug: In Isobar::PyLayer::getEnclosure() wrapper, if the overall
enclosure is requested, pass the right parameter to the C++ function.
* Change: In AllianceFramework, make public _bindLibraries() and export
it to the Python interface.
* Change: In AllianceFramework::create(), do not longer call bindLibraries().
This now must be done explicitely and afterwards.
* Change: In AllianceFramework::createLibrary() and
Environement::addSYSTEM_LIBRARY(), minor bug corrections that I don't
recall.
* Change: In SearchPath::prepend(), set the selected index to zero and
return it.
* Change: In CRL::System CTOR, add "etc" to the PYTHONPATH as the
configuration files are now organized as Python modules.
* New: In PyCRL, export the CRL::System singleton, it's creation is no
longer triggered by the one of AllianceFramework.
* New: In CRL/etc/, convert most of the configuration files into the
Python module format. For now, keep the old ".conf", but that are no
longer used.
For the real technologies, we cannot keep the directory name as
"180" or "45" as it not allowed by Python syntax, so we create "node180"
or "node45" instead.
Most of the helpers and coriolisInit.py are no longer used now.
To be removed in future commits after being sure that everything
works...
* Bug: In AutoSegment::makeDogleg(AutoContact*), the layer of the contacts
where badly computed when one end of the original segment was attached
to a non-preferred direction segment (mostly on terminal contacts).
Now use the new AutoContact::updateLayer() method.
* Bug: In Dijkstra::load(), limit symetric search area only if the net
is a symmetric one !
* Change: In Katana/python/katanaInit.py, comply with the new initialisation
scheme.
* Change: In Unicorn/cgt.py, comply to the new inititalization scheme.
* Change: In cumulus various Python scripts remove the call to
helpers.staticInitialization() as they are not needed now (we run in
only *one* interpreter, so we correctly share all init).
In plugins/__init__.py, read the new NDA directory variable.
* Bug: In cumulus/plugins/Chip.doCoronafloorplan(), self.railsNb was not
correctly managed when there was no clock.
* Change: In cumulus/plugins/Configuration.coronaContactArray(), compute
the viaPitch from the technology instead of the hard-coded 4.0 lambdas.
In Configuration.loadConfiguration(), read the "ioring.py" from
the new user's settings module.
* Bug: In stratus.dpgen_ADSB2F, gives coordinates translated into DbU to
the XY functions.
In st_model.Save(), use the VstUseConcat flag to get correct VST files.
In st_net.hur_net(), when a net is POWER/GROUND or CLOCK also make it
global.
* Change: In Oroshi/python/WIP_Transistor.py, encapsulate the generator
inside a try/except block to get prettier error (and stop at the first).
Jean-Paul Chaput