riscv-openocd/src
Ian Thompson 4279b23fca target/xtensa: populate PS correctly during fetch
Read PS from EPS[debuglevel] during fetch such that it reflects the correct value when read via telnet (not just via gdb_server).

Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I8504f68989bc6d5fe451a8cb69d01c86f4ec0100
Reviewed-on: https://review.openocd.org/c/openocd/+/7195
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-09-17 20:57:26 +00:00
..
flash flash/nor/rsl10: Check return value 2022-09-17 20:56:46 +00:00
helper openocd: fix for polling during "expr" computation 2022-09-13 22:14:28 +00:00
jtag drivers/bcm2835gpio: Fully restore GPIOs after use 2022-09-13 22:17:41 +00:00
pld openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
rtos FreeRTOS: Fix thread reg list for Cortex-M7 2022-09-13 22:20:04 +00:00
rtt openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
server server: add function to get openocd shutdown status 2022-09-03 21:28:11 +00:00
svf openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
target target/xtensa: populate PS correctly during fetch 2022-09-17 20:57:26 +00:00
transport openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
xsvf openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
Makefile.am openocd: build: add SPDX tag 2022-07-23 13:06:38 +00:00
hello.c openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
hello.h openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
main.c openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00
openocd.c openocd: prevent target polling during 'init' 2022-08-15 13:22:18 +00:00
openocd.h openocd: src: replace the GPL-2.0-or-later license tag 2022-07-23 13:59:13 +00:00