riscv-openocd/src/target
Tomas Vanek 4b998cb5f5 cortex_m: fix stepping on FPB rev 1
Stepping in the maskisr auto mode sets breakpoint to step over interrupt
service tasks. If the device has FPB rev 1, setting hard breakpoint
is impossible on address over 0x1fffffff.

Use soft type breakpoint for adresses over 0x1fffffff if FPB is rev 1.
This may eventually fail if the code memory is not writeable, but there
is nothing to do in such case.

Change-Id: Ibdeeb506903a35d550b64f82c24c37a668de62b3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4857
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-02-04 10:25:44 +00:00
..
openrisc server: free strduped port numbers 2018-03-15 17:08:53 +00:00
riscv target/riscv/riscv-011: fix compile warning about uninitialized variable 2018-08-14 04:32:46 +01:00
Makefile.am esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
aarch64.c aarch64: support for aarch32 ARM_MODE_SYS 2019-01-30 09:01:59 +00:00
aarch64.h aarch64: add 'maskisr' command 2018-01-16 09:05:41 +00:00
adi_v5_jtag.c arm_adi_v5: rewrite dap_to_jtag and dap_to_swd 2019-01-30 14:29:10 +00:00
adi_v5_swd.c arm_adi_v5: rewrite dap_to_jtag and dap_to_swd 2019-01-30 14:29:10 +00:00
algorithm.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
algorithm.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
arm.h target/aarch64: add support for multi-architecture gdb 2019-01-08 10:00:09 +00:00
arm7_9_common.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
arm7_9_common.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
arm7tdmi.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm7tdmi.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm9tdmi.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm9tdmi.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm11.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm11.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm11_dbgtap.c Fix usage of timeval_ms() 2016-07-19 10:45:16 +01:00
arm11_dbgtap.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm720t.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm720t.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm920t.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm920t.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
arm926ejs.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm926ejs.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
arm946e.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm946e.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm966e.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
arm966e.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm_adi_v5.c arm_adi_v5: rewrite dap_to_jtag and dap_to_swd 2019-01-30 14:29:10 +00:00
arm_adi_v5.h arm_adi_v5: rewrite dap_to_jtag and dap_to_swd 2019-01-30 14:29:10 +00:00
arm_cti.c target/arm_cti : export CTI APPPULSE and INACK register 2018-12-27 12:47:47 +00:00
arm_cti.h armv8: valgrind memleak fixes 2018-04-10 09:13:02 +01:00
arm_dap.c target/arm_dap: fix segmentation fault in 'dap info' cmd 2019-01-23 15:25:53 +00:00
arm_disassembler.c target/arm: Add PLD command to ARM disassembler. 2018-06-22 07:42:27 +01:00
arm_disassembler.h target: arm: disassembler: decode v6T2 ARM ISB instruction 2018-01-13 08:36:29 +00:00
arm_dpm.c target/cortex_a: remove duplicate code to read target registers 2018-11-06 12:42:24 +00:00
arm_dpm.h target/cortex_a: remove duplicate code to read target registers 2018-11-06 12:42:24 +00:00
arm_jtag.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
arm_jtag.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
arm_opcodes.h arm_opcode: fix encoding of ARMv5 breakpoint instruction 2019-01-23 15:26:39 +00:00
arm_semihosting.c Avoid null target->semihosting references. 2018-07-18 21:10:53 +01:00
arm_semihosting.h Rework/update ARM semihosting 2018-06-04 09:16:08 +01:00
arm_simulator.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
arm_simulator.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
armv4_5.c command: initialize the command mode for every command 2019-01-27 11:45:01 +00:00
armv4_5.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
armv4_5_cache.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
armv4_5_cache.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
armv4_5_mmu.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
armv4_5_mmu.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
armv7a.c armv7a: ARMv7-A MMU tools 2018-11-08 09:10:09 +00:00
armv7a.h armv7a: ARMv7-A MMU tools 2018-11-08 09:10:09 +00:00
armv7a_cache.c target/armv7a_cache: add gdb keep-alive and fix a missing dpm finish 2018-08-08 10:36:28 +01:00
armv7a_cache.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
armv7a_cache_l2x.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
armv7a_cache_l2x.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
armv7a_mmu.c armv7a_mmu: s/LOG_ERROR/LOG_WARNING/ on address translation failure 2018-12-12 08:47:01 +00:00
armv7a_mmu.h armv7a: ARMv7-A MMU tools 2018-11-08 09:10:09 +00:00
armv7m.c armv7m: always set xPSR.T=1 when starting an algorithm 2019-01-08 09:56:48 +00:00
armv7m.h target, flash: prepare infrastructure for multi-block blank check 2018-04-10 06:16:40 +01:00
armv7m_trace.c target/armv7m_trace: Use prefix for enums 2018-07-19 10:49:24 +01:00
armv7m_trace.h target/armv7m_trace: Use prefix for enums 2018-07-19 10:49:24 +01:00
armv8.c aarch64: support for aarch32 ARM_MODE_SYS 2019-01-30 09:01:59 +00:00
armv8.h Add ARM v8 AArch64 semihosting support 2018-07-13 09:18:14 +01:00
armv8_cache.c aarch64: fix debug entry from EL0 2018-03-16 08:58:06 +00:00
armv8_cache.h aarch64: add cache handling functions 2017-02-10 14:01:39 +01:00
armv8_dpm.c aarch64: support for aarch32 ARM_MODE_SYS 2019-01-30 09:01:59 +00:00
armv8_dpm.h aarch64: fix debug entry from EL0 2018-03-16 08:58:06 +00:00
armv8_opcodes.c target aarch64: rework memory read/write to use 8/16/32 bit operations 2018-01-04 09:09:46 +00:00
armv8_opcodes.h Support AArch64 SIMD/FP registers read/write 2018-03-10 13:23:48 +00:00
avr32_ap7k.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
avr32_ap7k.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
avr32_jtag.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
avr32_jtag.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
avr32_mem.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
avr32_mem.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
avr32_regs.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
avr32_regs.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
avrt.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
avrt.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
breakpoints.c breakpoints: simplify the test to find a breakpoint 2018-06-04 09:17:14 +01:00
breakpoints.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
cortex_a.c cortex_a_poll: minor code factorization to enhance readability 2019-01-16 10:52:43 +00:00
cortex_a.h target/cortex_a: remove unused code controlled by "fast_reg_read" 2018-11-06 12:17:48 +00:00
cortex_m.c cortex_m: fix stepping on FPB rev 1 2019-02-04 10:25:44 +00:00
cortex_m.h target/cortex_m: do not use VECTRESET on Cortex-M0, M0+ and M1 2018-12-19 13:14:09 +00:00
dsp563xx.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
dsp563xx.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
dsp563xx_once.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
dsp563xx_once.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
dsp5680xx.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
dsp5680xx.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
embeddedice.c Use timeval helpers 2018-01-25 16:43:49 +00:00
embeddedice.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
esirisc.c esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
esirisc.h esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
esirisc_jtag.c esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
esirisc_jtag.h esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
esirisc_regs.h esirisc: support eSi-RISC targets 2018-10-16 11:58:24 +01:00
esirisc_trace.c esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
esirisc_trace.h esirisc: support eSi-Trace 2018-12-12 08:47:44 +00:00
etb.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
etb.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
etm.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
etm.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
etm_dummy.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
etm_dummy.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
fa526.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
feroceon.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
hla_target.c hla_target: fix adapter_poll() to preserve TARGET_DEBUG_RUNNING state 2019-01-27 20:58:03 +00:00
image.c target/image: Add support for S6 record in Motorola SREC files 2018-11-18 08:21:25 +00:00
image.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
lakemont.c target: lakemon: implement assert_reset and deassert_reset 2018-01-13 09:25:34 +00:00
lakemont.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
ls1_sap.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
mem_ap.c target/mem_ap: generic mem-ap target 2018-09-10 09:37:03 +01:00
mips32.c target, flash: prepare infrastructure for multi-block blank check 2018-04-10 06:16:40 +01:00
mips32.h target, flash: prepare infrastructure for multi-block blank check 2018-04-10 06:16:40 +01:00
mips32_dmaacc.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
mips32_dmaacc.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
mips32_pracc.c mips32, add support for micromips in debug mode 2017-05-08 18:03:28 +01:00
mips32_pracc.h mips32: inline functions in headers must be static 2017-07-07 09:54:35 +01:00
mips_ejtag.c mips32, use scan32 function for reading impcode/idcode. 2017-05-08 18:05:58 +01:00
mips_ejtag.h ejtag: added missing instructions. 2018-01-13 09:46:00 +00:00
mips_m4k.c mips_m4k: add optional reset handler 2018-07-31 15:54:28 +01:00
mips_m4k.h mips32: add micromips isa handling 2017-05-08 18:04:56 +01:00
nds32.c Rework/update ARM semihosting 2018-06-04 09:16:08 +01:00
nds32.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_aice.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_aice.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_cmd.c Fix GCC7 warnings about string truncation 2017-10-23 10:54:24 +01:00
nds32_cmd.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_disassembler.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
nds32_disassembler.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_edm.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_insn.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_reg.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
nds32_reg.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_tlb.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_tlb.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v2.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v2.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_v3.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v3.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
nds32_v3_common.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v3_common.h target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v3m.c target: Add 64-bit target address support 2017-02-10 13:50:17 +01:00
nds32_v3m.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
oocd_trace.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
oocd_trace.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
quark_d20xx.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
quark_x10xx.c target: quark_x10xx: miscellaneous cleanups 2018-01-13 09:25:12 +00:00
register.c register: support non-existent registers 2018-10-16 11:57:53 +01:00
register.h tdesc: bitfields may carry a type 2018-03-27 09:15:27 +01:00
semihosting_common.c GDB fileIO stdout support 2018-07-13 09:18:21 +01:00
semihosting_common.h Rework/update ARM semihosting 2018-06-04 09:16:08 +01:00
smp.c helper: Code cleanup for hexify() 2016-12-08 12:34:53 +00:00
smp.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
startup.tcl gdb_server: run control fixes for vCont 2018-02-27 11:19:10 +00:00
stm8.c target/stm8: add missing destroy_reg_param() 2019-01-14 08:46:36 +00:00
stm8.h stm8 : new target 2017-12-07 07:53:13 +00:00
target.c target: do not allow 'target create' after init 2019-01-27 20:59:54 +00:00
target.h Permit null target on TCL connection 2018-11-13 07:02:58 +00:00
target_request.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
target_request.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
target_type.h gdb_server: add support for architecture element 2018-10-16 11:58:10 +01:00
testee.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
trace.c Remove FSF address from GPL notices 2016-05-24 22:30:01 +01:00
trace.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00
x86_32_common.c x86_32_common: fix some warnings 2018-01-30 07:34:32 +00:00
x86_32_common.h target: lakemon: implement assert_reset and deassert_reset 2018-01-13 09:25:34 +00:00
xscale.c target/arm: add support for multi-architecture gdb 2019-01-08 09:59:42 +00:00
xscale.h Make #include guard naming consistent 2016-05-24 22:30:55 +01:00