To simplify the ipdbg start/stop command and be able to
add additional commands in the future, we introduce the
concept of a hub which has to be created before a
ipdbg server can be started.
The hub was created on the fly in previous versions.
Change-Id: I55f317542d01a7324990b2cacd496a41fa5ff875
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7979
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When receiving an OpenOCD debug log to investigate about errors or
issues, the first question is often about providing the complete
command line to better understand the use context.
Plus, when OpenOCD is lunched by an IDE, its command line is kept
hidden inside the IDE, adding troubles to the user to recover it.
Add the full command line directly inside the debug log.
It could have been useful to also search and add in the log the
full path of the OpenOCD executable, but this is not an immediate
task due to portability among OS's. See, for example:
https://stackoverflow.com/questions/933850
This part could be handled in a future change, if really needed.
Change-Id: Ia6c5b838b9b7208bf1ecac7f95b5efc319aeabf5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8170
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Extend the existing code to support Monitor mode in AArch32.
Change-Id: Ia43df98d1497baac48aea67b92d81344c24f0635
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8169
Tested-by: jenkins
ADIv6 brought more complicated rules for DP reg 0 banking.
Neither the original implementation [1] nor the later
modification [2] respected that the DP reg 0 is banked
for read only, not for write. Enforcing of an useless
SELECT write before a write to ABORT register may trigger
FAULT (CTRL/STAT bits ORUNDETECT and STICKYORUN are set)
or WAIT (DP is stalled by an outstanding previous operation)
and therefore make ABORT register virtually unusable
on some adapters (bitbang, CMSIS-DAP).
There are DP ABORT specific functions swd_queue_ap_abort()
and swd_clear_sticky_errors() which worked around the problem
using the lowest level swd->write_reg(). Using a specific
write procedure for a single DP register was error prone
(there are other DP_ABORT writes using swd_queue_dp_write_inner())
and also the Tcl command 'xx.dap dpreg 0 value' suffered
from unwanted SELECT write.
Other smaller discords in DP banking probably do not
influence normal DP operation however they may complicate
debugging in corner cases.
Adhere strictly to the DP banking rules for both ADI versions.
Fixes: [1] commit 72fb88613f ("adiv6: add low level swd transport")
Fixes: [2] commit ee3fb5a0ea ("target/arm_adi_v5: fix DP SELECT logic")
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I3328748c1c3e0661c5ecd6eb070ac519b190ace2
Reviewed-on: https://review.openocd.org/c/openocd/+/8154
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The bitbang driver kept retrying a SWD command as long as
the debugged device had been responding by SWD WAIT.
If the DP stalled in WAIT permanently, OpenOCD hanged.
Check 0.5 sec timeout in WAIT retry loop.
While on it insert a short alive_sleep() if the command
is retried 20 or more times.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I744e56e21a5a2dc2c4494cc0d7bbcb4be14ddb23
Reviewed-on: https://review.openocd.org/c/openocd/+/8153
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Log SWD commands with not OK response but WAIT retries at debug level.
For commands responded OK and WAIT retries use debug io level
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Idf658e82ed970061c155945df55d06908ed25e09
Reviewed-on: https://review.openocd.org/c/openocd/+/8152
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Allow logging at a changeable level.
Add an example of usage in ftdi driver.
Log SWD commands with not OK response at debug level (3).
For commands which responded OK use debug io level (4)
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I67a472b293f7ed9ee84cadb7c081803e9eeb1ad0
Reviewed-on: https://review.openocd.org/c/openocd/+/8151
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Allow direct pointer to struct adiv5_private_config
for targets with adiv5_private_config inside of a bigger
private config container. Use it instead of the private_config
pointer toggling hack in aarch64.c
Allow optional use of -dap parameter and use it instead
of the static variable hack in xtensa_chip.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I7260c79332940adfa49d57b45cae39325cdaf432
Reviewed-on: https://review.openocd.org/c/openocd/+/8138
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Unify the error codes returned by adapter drivers in the case
of the received SWD ACK field differs from OK.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I29e478390b4b30408054a090ac6a7fac3415ae71
Reviewed-on: https://review.openocd.org/c/openocd/+/8137
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit [1] added a break on error to the nrf5_erase() sector loop
and the checking of the res value became useless in the for loop condition.
Removing nrf5_get_probed_chip_if_halted() later in [2]
dropped res initialization and clang static analyser complains
"The left operand of '==' is a garbage value"
Drop the useless test!
Fixes: [1] commit 491636c8b8 ("flash/nor/nrf5: check protection before flash erase/write on nRF51")
Fixes: [2] commit 2db325f539 ("flash/nor/nrf5: drop nrf5_get_probed_chip_if_halted()")
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ife6071c509719f8d7dc312fe9a780bdcf2575f69
Reviewed-on: https://review.openocd.org/c/openocd/+/8174
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add access to dsp registers and a command for dsp related operations.
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: I30aec0b9e4984896965edb1663f74216ad41101e
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7867
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Running the GDB command 'flash-erase' triggers sending the remote
GDB commands 'vFlashErase' (one per flash bank) followed by one
single 'vFlashDone', with no 'vFlashWrite' commands in between.
This causes the field 'gdb_connection->vflash_image' to be NULL
during the execution of 'vFlashDone', triggering a segmentation
fault in OpenOCD.
While parsing 'vFlashDone', check if any image to flash has been
received.
Change-Id: I443021c7a531255b60f2c44c2685e52e3c34b5c8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8164
Tested-by: jenkins
After commit d9b2607ca0 ("gdb_server: support sparse register
maps"), GDB crashes while requesting the value of 'cpsr' because
the fake register is tagged as not existing.
Change the logic and set all register as existing, while still
limiting the list for the initial GDB request at connect.
Change-Id: I1c4e274c06147683db2a59a8920ae5ccd863e15c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8163
Tested-by: jenkins
for features flags.
Change-Id: I8bff0f5fac41c50180c847f36c6d2a075eca32ca
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8109
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The command substantially complicates support of nRF53/91
series. It was not even properly ported to nRF52.
The informative value is disputable. Who wants to see
e.g. override trim values for radio or unique device ID?
Drop it and simplify the driver.
Change-Id: Ia7fb20ce2ebf16065705c5d18deaf934e58db426
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8108
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
nrf5_get_probed_chip_if_halted() was somewhat bizarre
combination of functions:
- test if the target is halted is appropriate for flash
erase/write only, certainly not for getting chip info
- getting chip pointer takes place more frequently
and using one temporary variable for dereference
makes no harm
- probing chip is useless at all as the flash
infrastructure always calls auto_probe() before
entering a flash operation
Replace the function by ordinary and readable code.
Change-Id: Ic31f4e33d8b7b36687be3f40bfd0fe913d17b75f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8107
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
from Product Specification of nRF52805, 810, 811
820, 833 and 840.
While on it, rename the table to make sure the codes
are valid for nRF52 series only.
Change-Id: Id8f78fd214c5d345d1769378ae546a6be5a183ba
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8105
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After 'reset run' or 'reset halt' the loaded application
is expected to manipulate RAMON register to workaround
the known silicon errata.
Moreover, writing to RAMON register from 'reset-end' event
after 'reset run' may collide with application intentions.
Use the workaround in 'reset-init' event only to ensure
correct function of target algorithms.
Change-Id: I7d2d92e6805a05a83676edb46b3163ef39b9a7e4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8104
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use the newer driver name 'nrf5' instead.
While on it set the unused parameters of flash bank
creation to zero.
While on it remove 2 empty comments.
Change-Id: I9cf0eadc5b696e6c8b7e6aec0ea3345967523e87
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8103
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
While on it update table comment and drop
not working URLs.
Change-Id: I9e21c72aa75a908c644460e43c148d3240c49b2d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8102
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
On 2008-03-05, before git's age, commit 6d95014674 adds sending
an ACK ('+' char) at GDB connection, before receiving any GDB
remote command that requires to be ACK'ed.
Neither the text added in the commit message ("added ACK upon
connection (send +)") nor in the associated comment ("send ACK to
GDB for debug request") provide an exhaustive explanation for
sending this unsolicited ACK.
This code has never been touched since its introduction.
Analysis of GDB code doesn't show it's required, including old GDB
code.
Running gdbserver (from GDB package) and attaching it with "nc"
shows that gdbserver does not send any ACK to a new connection.
Same for lldb-server.
Drop it!
Change-Id: Id68c352ce44dd85a1ea3d67446e17e2a241ef058
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6768
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Anatoly P <anatoly.parshintsev@syntacore.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
For the sake of https://review.openocd.org/c/openocd/+/7957
Instead of "coreid", 'target smp' command call order used as
an index
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iab86b81868d37c0bf8663707ee11367c41f6b96d
Reviewed-on: https://review.openocd.org/c/openocd/+/8162
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When performing a command queue allocation larger than the default page
size of 1MiB any subsequent allocations will run into an integer under-
flow when checking for the remaining memory left in the current page.
Causing the function returning a pointer past the end of the buffer and
thus creating a buffer overflow.
This has been observed to cause some transfers to Efinix FPGAs to fail,
because another buffer can get corrupted in the process, causing its
respective free() to fail.
Change-Id: Ic5a0e1774e2dbd58f1a05127f14816c8251a7d9c
Signed-off-by: SydMontague <sydmontague@phoenix-staffel.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8126
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
find members of a union, nested in struct.
Allows file to be compiled with GCC 4.0
Signed-off-by: Sevan Janiyan <venture37@geeklan.co.uk>
Change-Id: Ied68668d3b5f811573a20e11e83aceff268963eb
Reviewed-on: https://review.openocd.org/c/openocd/+/8120
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
At least one TAP shouldn't be in BYPASS mode
Change-Id: Ic882acbfc9b6a9f4b0c3bb4741a49f3981503c8c
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7741
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix flash operation error when addr-width > 32bit
on any 32-bit OS and some 64-bit OS (windows).
Change-Id: I199f1cc5128c45bd0bb155e37acb2fb6325dff88
Signed-off-by: wangyanwen <wangyanwen@nucleisys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8095
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Allows build with legacy toolchains which do not support
C23 nor GCC extension for binary literals.
Change-Id: I742d3a8a86bf16f81421d11c59d3cb155ee17aed
Signed-off-by: Sevan Janiyan <venture37@geeklan.co.uk>
Reviewed-on: https://review.openocd.org/c/openocd/+/8123
Tested-by: jenkins
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The original documents from Jedec since JEP106BG, do not report
the entry for "21 NXP (Philips)", replaced by "c".
It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I293173c4527c2eabebdc33a94cd23d3a557a4618
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8132
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The OpenJTAG driver behaviour always forces a system reset on jtag_init.
The driver was incorrectly assuming that when execute_reset is called
with trst set to 1 - perform a software TAP reset, otherwise perform a
system reset when trst is 0.
The set_state call assumes the that OpenJTAG hardware will perform a
software TLR reset if the target state is TAP_RESET. This is not the
case: the published VHDL will simply find the shortest path to TLR and
not perform a fixed 5 cycle operation with TMS held high.
Fix the code to only perform system resets when srst is 1 in
execute_reset and to force a software TAP reset operation in set_state
when the target state is TAP_RESET.
Change-Id: I7e0f76f8491efefff1ccaeb4b1ae16e722d76df4
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8121
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Calculate exact size of response expected from OpenJTAG device so that
openjtag_buf_read_standard doesn't spend 5 retry cycles waiting for
data that isn't coming.
Change-Id: Icd010d1fa4453d6592a1f9aed93fb1f01e0a19da
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8101
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as
COMMAND_HANDLER") breaks the option -event if it is the last of
the command line.
This can be tested, even without any device connected, through:
#> openocd -f board/ti_cc26x0_launchpad.cfg
wrong # args: should be "-event <event-name> <event-body>"
Fix the check on available arguments after -event.
Change-Id: Iec1522238f906d61a888a09a7685acd9ac6442a7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Lorenz Brun <lorenz@brun.one>
Fixes: ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as COMMAND_HANDLER")
Reviewed-on: https://review.openocd.org/c/openocd/+/8125
Tested-by: jenkins
Reviewed-by: Lorenz Brun <lorenz@brun.one>
Prior to the change when calling `log_output` without any arguments it
was unclear where the log was redirected.
Change-Id: Iaa3ecea8166f9c7ec8aad7adf5bd412799f719a1
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8071
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
LIBUSB_ERROR_INTERRUPTED can happen when (among other things) OpenOCD
process receives a signal like SIGHUP or SIGINT during a call to libusb.
Such situations are expected and should not be treated as an error - the
affected request should just be restarted.
Without this patch applied if a signal arrives during FTDI initialization
procedure we can easily end up (if JTAG speed is low) in situations like
https://review.openocd.org/c/openocd/+/4767. This happens because
fpsse_flush fails due to LIBUSB_ERROR_INTERRUPTED .
It should be noted that the current usage of mpsse_flush should be
revised since it seems that we don't always process error codes returned
by the function.
Change-Id: Ifa063ce828068f8d0371e1c2a864bb6174649848
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7769
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Enable support for USB vid and pid combinations other than 0x0403/0x6001
on OpenJTAG adapters.
Change-Id: Ibb5fb14a6f33abbc011dbf3179df20d79ed74a7a
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8100
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix obsoleted references to Cortex-M3 from the time
when M3 was the only supported Cortex.
Fix typo.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I6f93265f1b9328fec063fecd819210deb28aaf2c
Reviewed-on: https://review.openocd.org/c/openocd/+/8099
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In 2008 the commit 1829361253 ("define resetting
the target into the halted or running state as an atomic operation.")
introduced the target_halt() call to the end of cortex_m3_assert_reset(),
Checkpatch-ignore: GIT_COMMIT_ID
A year later the commit ed36a8d15d
("... Updated halt handling for cortex_m3")
prevented cortex_m3_halt() take any action in case of TARGET_RESET state.
This narrowed the target_halt() called from cortex_m3_assert_reset()
to setting target->halt_issued and storing a time stamp.
Introducing ocd_process_reset(_inner) made the setting of halt_issued
and halt_issued_time useless. The Tcl function waits for halt
of all targets if applicable.
cortex_m_halt() and also target_halt() does not work as expected
if the cached target state is TARGET_RESET (although the core could
be out of reset and ready to be halted, just have not been polled).
Explicit Tcl arp_poll must be issued in many scenarios.
Remove the useless hack.
Also remove the explicit error return from cortex_m_halt_one()
in case of RESET_SRST_PULLS_TRST and asserted srst. If the communication
with the target is gated by any reset, cortex_m_write_debug_halt_mask()
fails. Propagate the error return of this call instead.
Change-Id: I0da05b87f43c3d0facb78e54d8f00c1728fe7c46
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8098
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In a corner case when debug_ap is not available,
cortex_m_assert_reset() asserts reset to restore
communication with the target.
Prevent to do so on targets with defer_examine,
as such targets need some special handling to enable them
after reset anyway.
The change makes possible to handle a multicore Cortex-M SoC with
an auxiliary Cortex-M core(s) switched of by default
even with 'reset_config srst_gates_jtag'
Change-Id: I8cec7a816423e588d5e2e4f7904c81c776eddc42
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8097
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Previously, the gpio_num and chip_num members of adapter_gpio_config
were typed as 'int' and a sentinel value of -1 was used to denote
unconfigured values.
Now, these members are typed as 'unsigned int' to better reflect their
expected value range.
The sentinel value now maps to UINT_MAX as all adapters either define an
upper bound for these members or, in the case of bcm2835gpio, only
operate on a specific chip, in which case the value doesn't matter.
Format specifiers have been left as %d since, when configured, valid
values are within the positive range of 'int'. This allows unconfigured
values to display as a more readable value of -1 instead of UINT_MAX.
Change-Id: Ieb20e5327b2e2e443a8e43d8689cb29538a5c9c1
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8124
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Jlink driver floods the debug log by a message per one poll interval.
Avoid annoying messages, change their logging level to LOG_DEBUG_IO
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I84ea6aa9cdfd44b5985c5393519d1efb7de9530a
Reviewed-on: https://review.openocd.org/c/openocd/+/8116
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
The target esirisc does not free the allocated memory resources,
causing memory leaks at OpenOCD exit.
Add esirisc_free_reg_cache() and esirisc_deinit_target() and use
them to free all the allocated resources.
Change-Id: I17b8ebff54906fa25a37f2d96c01d010a98cffbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8094
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>
The function in question does not need to change target state. It is a
target-type-dependant function, however, IMHO, it is safe to assume that
any target type would not need to change type-independant state of a
target to figure out the arch.
Change-Id: I607cb3aee6529cd5a97bc1200a0226cf6ef43caf
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8093
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There are quite a lot of "getters" in target interface.
They do not change target structure, nevertheless the structure is
passed to these functions via a plain pointer.
The intention is to clarify the purpouse of these functions by passing
the `target` structure as a pointer to constant data.
Change-Id: Ida4a798da94938753b86a293a308d93b091d1bf3
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8092
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Example for configuring multiple non-SMP
Xtensa cores e.g. for heterogeneous debug
- JTAG only at this time; DAP out of scope
- Dual-Xtensa Palladium example via VDebug
- Update Xtensa core config examples
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I6d2b3d13fa8075416dcd383cf256a3e8582ee1c1
Reviewed-on: https://review.openocd.org/c/openocd/+/8078
Tested-by: jenkins
Reviewed-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This change implements the support for the ARM Debug Interface v6.
The DAP-level interface properly selects the DP Banks and AP address.
Sample ARM configuration DAP and JTAG scripts have been updated.
Change-Id: I7df87ef764bca587697c778810443649a7f46c2b
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8067
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
the socket option RCVLOWAT is not supported on CYGWIN.
implemented ifdef __CYGWIN not to set this option.
Change-Id: I9f6e81fa98ecf5261ea286deb4675658aae59b8e
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8066
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This file is intended to be included in any user's project that
plans to use OpenOCD awareness for uCOS-III.
It is supposed to be distributed under a license compatible with
the uCOS-III code, that is Apache-2.0 license.
Distribute it under Apache License 2.0.
Change-Id: I51ecd469c8ccdd23a069d21e89b7d90886691395
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7996
Tested-by: jenkins
Daniel Anselmi
Antonio Borneo
Tomas Vanek
Walter Ji
Erhan Kurubas
Luca Rufer
SydMontague
Sevan Janiyan
Kirill Radkin
wangyanwen
Antonio Borneo
Evan Hunter
N S
Evgeniy Naydanov
Parshintsev Anatoly
Vincent Fazio
Ian Thompson
Jacek Wuwer