Make disassembly of the Thumb load-literal instruction show the
address of the literal being loaded (so users can avoid doing
that math themselves). Add and use an Align(PC,4) utility.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2535 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle more 32-bit instructions:
A5.3.3 Data processing (plain binary immediate)
These use mostly twelve bit literals, but there are also bitfield
and saturated add primitives.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2534 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle more 32-bit instructions:
A5.3.1 Data processing (modified immediate)
My small sample shows GCC likes to use many of these instructions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2533 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle a bunch of 32-bit instructions:
A5.3.4 Branches and miscellaneous control
Note that this shifts some responsabililty out of helper functions,
making the code and layout simpler for 32-bit decoders: they only
need to know how to format the instruction and its parameters.
Also, technical note: with this patch, Thumb1 decoders could now
call the Thumb2 decoder if they wanted to get nicer treatment of
the exiting 32-bit B/BLX instructions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2532 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Change layout of Thumb disassembly to work better with Thumb2:
- Move opcode to the left, allowing space for four hex bytes:
* after address, two spaces not one tab (taking 6 spaces)
* after 2-byte opcode, four spaces before tab
- Also, after opcode mnemonic use a tab not a space, to make
operands line up
Sample output (after some patches decoding a few 32-bit instructions):
0x00003e5a 0xf4423200 ORR r2, r2, #131072 ; 0x20000
0x00003e5e 0x601a STR r2, [r3, #0x0]
0x00003e60 0x2800 CMP r0, #0x00
0x00003e62 0xd1f3 BNE 0x00003e4c
0x00003e64 0xf008fa38 BL 0x0000c2d8
The affected lines of code now wrap at sane margins too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2531 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Initial support for disassembling Thumb2 code. This works only for
Cortex-M3 cores so far. Eventually other cores will also need Thumb2
support ... but they don't yet support any kind of disassembly.
- Update the 16-bit Thumb decoder:
* Understand CPS, REV*, SETEND, {U,S}XT{B,H} opcodes added
by ARMv6. (It already seems to treat CPY as MOV.)
* Understand CB, CBNZ, WFI, IT, and other opcodes added by
in Thumb2.
- A new Thumb2 instruction decode routine is provided.
* This has a different signature: pass the target, not the
instruction, so it can fetch a second halfword when needed.
The instruction size is likewise returned to the caller.
* 32-bit instructions are recognized but not yet decoded.
- Start using the current "UAL" syntax in some cases. "SWI" is
renamed as "SVC"; "LDMIA" as "LDM"; "STMIA" as "STM".
- Define a new "cortex_m3 disassemble addr count" command to give
access to this disassembly.
Sanity checked against "objdump -d" output; a bunch of the new
instructions checked out fine.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2530 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch correctly identifies a running target.
Patch made a tad more palatable by David Brownell <david-b@pacbell.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@2510 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Updates to private TAP state tables in amtjtagaccel interface driver.
The first change is the neccesary one to correct a long-standing bug that
caused the IDCODE to be shifted by one bit too many. This was caused by
an incorrect path from state RESET to state DRSHIFT.
The value of those 2 bytes were 0x8a and 0x04. This means that the
bitstream to do this transition is 0b 00100 01010 (send LSB first). This
will bring you from the reset state to the shift state; however, you
enter the shift-state twice, which explains why the ID-CODE that will be
read next will be shifted 1 bit. The fix changes these to 0x05 and 0x00.
This will send the bitstream 0b 00101 (send LSB first). This will bring
the TAP controller from the RESET state to the DRSHIFT state directly,
without entering the DRSHIFT state twice.
After checking the whole table, two other transitions were found that
could be optimized (5 bits in stead of 10 bits).
Summary off all changes:
From To Old values Old Bitstream New values New Bitstream Remarks
---- ------- ---------- ------------- ---------- ------------- -------
RESET DRSHIFT 0x8a 0x04 0b00100 01010 0x05 0x00 0b00101 1,2
IDLE DRSHIFT 0x85 0x08 0b01000 00101 0x04 0x00 0b00100 2
IDLE IRSHIFT 0x8b 0x08 0b01000 01011 0x06 0x00 0b00110 2
[1] Fixes the IDCODE bug
[2] Optimization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix intermittent J-Link interface startup failures:
- Use usb_reset to ensure selected dongle is in known good state.
- Assert emulator reset durning status check to prevent supurious failures.
- Eliminate status check loop; not needed due to other fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2471 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Restore some whitespace that got clobbered by over-aggressive
whitepace eradication patches a while back.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2446 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".
git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Add "jtag names" command, mirroring "target names" but returning
TAP names instead of target names. This starts letting TAPs be
manipulated in scripts ... much like what works now for targets.
It's a bit limited just yet, since "jtag cget $TAPNAME" doesn't
expose all TAP attributes. "$TARGETNAME cget" is more functional.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2428 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move repository URL output associate it with the version; they relate.
- 'openocd --version' output now appears much more terse, as expected.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2421 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove some bogus warnings during server startup for ARM926ejs
targets that were already halted for debug ... e.g. started up
a freshly built instance.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2417 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Warn when people (or scripts) use numeric identifiers for TAPs,
instead of dotted.name values. We want this usage to go away,
so that for example adding more TAPs doesn't cause config scripts
to break because some sequence number changed.
It's been deprecated since late 2008, but putting a warning on
this should help us remove it (say, in June 2010) by helping to
phase out old (ab)usage in config scripts.
Other than in various config files, the only code expecting such
a number was the almost unused str9xpec driver. This code was
changed to use the TAP it was passed, instead of making its own
dubious lookup and ignoring that TAP.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2415 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Adds new source files to encapsulate static/dynamic module handling.
- Further work should implement the jtag_interface_modules_load routine,
to populate the jtag_interfaces list from shared libraries in a path.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2413 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- issue is gdb stdin buffer gets full before we redirect openocd output
git-svn-id: svn://svn.berlios.de/openocd/trunk@2350 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This is minimal patch to support FA526 ARMv4 compatible core.
Since it is very similar to ARM920T I tried to reuse as much
code as possible.
CPU and board configs will follow soon.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2292 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Clean up the PLD files:
- Get rid of some extraneous whitespace
- Make various functions static
- Wrap overlong lines
git-svn-id: svn://svn.berlios.de/openocd/trunk@2272 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Let jtag_call_event_callbacks() behave when the callback removes itself.
Oddly, this crashed on x86_32 but not x86_64.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2264 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix parsing bugs for "$target_name mww addr data [count]" ... it was
always requiring the count, instead of just defaulting it to one.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2263 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use macro to eliminate duplicate body definitions.
- Rename okay as is_okay; add parenthesis to help "clarify" logic.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2253 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix a bug preventing ICEpick "enable that TAP" code from working:
the "runtest" command wrongly finished with a JTAG reset, discarding
the work the TAP enable handler just finished! Instead, JTAG should
stay in RUN/IDLE state.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2252 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Extend the internal JTAG event handlers to cover enable/disable,
and use those events to make sure that targets get "examined" if
they were disabled when the scan chain was first set up:
- Remove "enum jtag_tap_event", merge with "enum jtag_event",
so C code can now listen for TAP enable/disable events.
- Report those events so they can trigger callbacks.
- During startup, make target_examine() register a handler to
catch ENABLE events for any then-disabled targets.
This fixes bugs like "can't halt target after enabling its TAP".
One class of unresolved bugs: if the target has an ETM hooked
up to an ETB, nothing activates the ETB. But starting up the
ETM without access to the ETB registers fails...
git-svn-id: svn://svn.berlios.de/openocd/trunk@2251 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Tighten error handling on TAP enable/disable paths a bit:
- Don't enable/disable unless it's necessary. Those event
handlers could have nasty side effects...
- Don't *succeed* enables/disables if there was no code which
could have implemented that action. This prevents bugs like
wrongly acting as if the scan chain changed.
- Minor whitespace cleanup in enable/disable command code.
The big problem is still the lack of code to verify scan chains
were actually updated as requested; this adds a comment on that.
I suspect the best we can do near term will be to verify IDCODE.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2250 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix bug in a warning. It warned about "huge IRlength" for an
older JRC with a two bit instruction register ... wrong!
git-svn-id: svn://svn.berlios.de/openocd/trunk@2249 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix some polling issues:
- Don't background-poll disabled TAPs ... this was just a bug
waiting to happen. (And then it happened!)
- Don't fail command line polls of disabled taps; that's not any
kind of error, it's just that you can't do much. But do show
that tap-disabled status.
- Spell "continuous" correctly in the variable name. ;)
Not resolved by this patch: the need for an interlock whereby
other code (like the JTAG layer) can block all other access to
the JTAG layer, e.g. while enabling or disabling TAPs. And
that interlock needs to be timer-safe...
git-svn-id: svn://svn.berlios.de/openocd/trunk@2247 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Doc update: say "jtag newtap ... -disable" records the
state after exiting the RESET state, matching the only
implementation we're working with so far (TI ICEpick-C).
Matching code updates. Now we can be sure that the
"enabled" flag value is correct after JTAG resets.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix a memory leak in jtag_tap_free(): unregister the event
callback too.
Also fix the associated conceptual bug in unregistering JTAG
event callbacks: since the same callback procedure is used
many times with different callback data (a TAP handle), that
data must be considered when unregistering any callback.
This could fix some crashes after TAP registration errors,
by making sure the reset event handler doesn't scribble over
memory that's now used by something else.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2245 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Minor jtag cleanup:
- remove hidden assumption about JTAG event numbering
- move function declarations to a header
- some end'o'line whitespace
- use "calloc" not "malloc + memset"
git-svn-id: svn://svn.berlios.de/openocd/trunk@2244 b42882b7-edfa-0310-969c-e2dbd0fdcd60
OpenOCD doesn't actually *need* to be keeping all TCP ports
active ... creating security issues in some network configs.
Instead, let config file specify e.g. "tcl_port 0" (or gdb_port,
telnet_port) to disable that particular remote access method.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2240 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make fast_load_image use the helper coverage the standard load_image.
- Improve whitespace in the moved lines.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2239 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Simplify argument parsing logic using switch statement.
- Use parse_u32 to ensure all values parse properly.
- Return syntax error when mode argument fails to parse.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2236 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: return syntax error if remove called without one argument.
- Use parse_u32 to ensure address and length arguments parse properly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2235 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Change: All local variable types are now unsigned.
- Use parse_u32 to ensure address and value parse properly.
- Use parse_uint to ensure count parses properly.
- Move variables to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2231 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use parse_u32 and parse_uint for address and count, respectively.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2230 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make argument check use parse_uint to ensure value parses properly.
- Move variable declarations to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2228 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use unsigned type for delay variable.
- Use parse_uint to ensure delay argument parses properly.
- Bug fix: Return syntax error if more than one argument is given.
- Bug fix: Return syntax error when argument fails to parse.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2227 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Currently the "debug_level 3" command tracing ignores commands
that could return values to TCL scripts (by plugging in to a
slightly lower level of the interpreter stack).
Fix that by abstracting the tracing command and starting to
make some of those previously-untraced commands use this new
mechanism.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2224 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Partial fix to the "long IR length" problems.
- Current code could handle up to 32 bit IR lengths with
full functionality, if it didn't just reject may of them
out of hand. So only reject clear errors, where the IR
mask (or capture instruction) needs more than IrLen bits.
- Longer IR lengths can only be handled in BYPASS mode
for now. Example: TI's DSPs use 38-bit IR lengths.
So we can't issue their IDCODE instructions...
A more complete fix would be able to issue longer instructions;
or minimally, would fail cleanly for the non-BYPASS case.
Note that this *could* make some currently broken scripts fail,
since the previous code accepted garbage values so long as
they didn't use more than 16 bits.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2222 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move the mips32_..._read_mem calls to top-level of read_mem function.
- Change: Only perform mips_m4k_read_mem conversion when retval == ERROR_OK.
- Prevents pointless conversions of bogus read values after failures.
- Eliminate retval variable from mips_m4k_write_mem; return directly.
- Move declaration of retval variable to point of first use.
- Remove the now redundant switch statements testing size:
- argument sanitizing already covers these cases.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2220 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch helps fix MIPS big endian (elf32-tradbigmips) targets.
If "-endian big" is not set in target create, the endianess defaults to
little. mw and md commands will still work, but binary file loads will
have the incorrect word order loaded into memory.
The EJTAG processor access data register (PrAcc) is little endian
regardless of the CPU endianness; it is always loaded LSB first. This
is confirmed by the fact that mips_ejtag_drscan_32() uses buf_set_u32()
to load the scan field; buf_set_u32() is a little-endian formatter. For
big endian targets, data buffers have to be modified so the LSB of each
u32 or u16 is at the lower (first) memory location. If the drscan
out_value word order is set using buf_set_u32() then it makes sense to
also fixup the in_value with buf_get_u32(); a symmetry argument. This
has no affect on little endian hosts.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2219 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use the default KHz speed setting, in case interface is not initialized.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: Always clear high bit of USB bulk out endpoint.
- Use parse_ulong helpers to ensure numeric strings are parsed properly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2217 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use parse_uint helper to ensure argument is parsed properly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2216 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: Return a syntax error when less than two arguments are given.
- Bug fix: Use parse_u16 helper to ensure vales are parsed properly.
- Simplify loop termination logic by ensuring argc is always even.
- Move loop induction variable declaration to where it is used.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2215 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use parse_u32 helper to ensure scan values are parsed properly.
- Clear the fields buffer to ensure partial cleanup occur correctly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2214 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Show the port number to the user when asking for it or setting it.
- Print an error if the parport_port has already been set.
- Use parse_u16 helper to ensure the parport_port string parses correctly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2211 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Show the port number to the user when asking for it or setting it.
- Print an error if the amt_jtagaccel_port has already been set.
- Use parse_u16 helper to ensure amt_jtagaccel_port string parses correctly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Show the port number to the user when asking for it or setting it.
- Print an error if the parport_port has already been set.
- Use parse_u16 helper to ensure the parport_port string parses correctly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: Return a syntax error if more than one argument is given.
- Bug fix: Use new parse_uint helper ensure debug_level parses correctly.
- Change: Display the debug_level after it has been set.
- Simplify bounds checking of debug_level.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2208 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use new parse_ulong to ensure duration parses as a valid number.
- Rework logic to improve readability and seliminate uperfluous braces.
- Change whitespace to improve style.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2207 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Used to improve command argument parsing of unsigned integers values.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Minor bugfix: command_print_sameline() is what the
headers declare; make the code match.
Minor improvement: make the printf format params always be const.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2205 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Original patch submitted by David Claffey [dnclaffey@gmail.com].
git-svn-id: svn://svn.berlios.de/openocd/trunk@2202 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: return a syntax error if the wrong number of arguments are given.
- Add handle_bp_command_list() and handle_bp_command_set().
- Use temporary addr variable to eliminate redundant strtoul() calls.
- Place variable declarations at their point of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2196 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add target_timer_callback_periodic_restart and target_call_timer_callback.
- Clean up and simplify logic that determines whether to call each callback.
- Move variable declarations to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2195 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add a doxygen block to simplify logic.
- Move declarations to point of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Return syntax error unless exactly one argument is passed.
- Move variable declaration to point of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2193 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Return syntax error if more than one argument is given.
- Move variables to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2192 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Eliminate redundant calls to target_resume with addr temp variable.
- Place variables at location of first use.
- Fix minor whitespace issues.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2191 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: return syntax error when more than one argument is given.
- Eliminate redundant calls to step callback with addr temp variable.
- Place variables at location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
other server configuration. Explain what it's about;
reference the related "$target_name curstate" method.
Update "poll" output to report whether background polling
is enabled or not.
Also fix a small typo; PC's have "complementary" tools.
Some have also "complimentary" ones; but not all.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols.
- Enabled when either libftdi or FTD2xx driver should be built.
- Eliminates redundant DRIVERSFILE assignment in JTAG automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Consolidate all individual driver variables into DRIVERFILES.
- Eliminates all empty 'else' conditional clauses.
- Move minidriver files to top of file.
- Use MINIDRIVER conditional to build only driver(s) that will be linked.
- Eliminate superfluous whitespace.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add new jtag_config_khz to increase encapsulation of jtag->khz call.
- Add new jtag_get_speed_readable to encapsulate of jtag->speed_div call.
- Make definition of jtag static in core.c, remove extern from tcl.c.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2171 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move jtag_event_callbacks struct to core.c; it's an implementation detail.
- Move jtag_*_event_callbacks next to the definition of the new function type.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Define the function signature used by the JTAG event callback mechanism.
- Provide Doxygen block for new type, including TODO for its return value.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2168 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move nvp_jtag_tap_event and jtag_tap_handle_event to tcl.c.
- Change both to be static; remove declaration of function from jtag.h.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2166 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add accessors for setting the jtag_verify_capture_ir flag.
- Use them in handle_verify_ircapture_cpmmand
- Change variable type to bool; make it static.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2164 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Makes jtag_error static, add new get helper function for completeness.
- Improve and add documentation and style for these helpers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2162 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Update handle_reset_config_command in tcl.c to use new helpers.
- Replace direct accesses in JTAG interface and target drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Setter calls the interface driver callback to improve core encapsulation.
- Use getter in standard JTAG interface drivers and ZY1000 minidriver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add accessor functions to return their value.
- Use new SRST accessor in cortex_m3.c and mips_m4k.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@2157 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- src/jtag/core.c: contains the low-level JTAG TAP and scanning routines.
- src/jtag/tcl.c: contains high-level JTAG TCL commands that use the core.
- Remove static keywords from routines in core.c, extern from tcl.c:
- jtag, jtag_interface global variables
- jtag_{examine,validate}_chain and jtag_tap_{init,free} functions
- Added myself to the copyright header in both of these files.
- Used 'svn cp' to add files, so versioning was preserved for both.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2149 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move plain IR scan declaration closer to the other IR scan declarations.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2147 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Remove unused orig_n local variable.
- Merge variable declaration with first use.
- Update code to use current style guidelines.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2143 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Merge declarations of temporary variables with first use.
- Restructure logic to simplify conditional logic.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: Use unsigned type and strtoul when parsing for position number.
- Simplify logic by returning directly when a tap is found by name.
- Reduce scope: declare temporary variables with first use.
- Bring code up to current style guidelines.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add new error codes to encode the possible failure conditions.
- Add documentation to describe the routine's possible error codes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Change types of tms_bits and tms_count to unsigned, eliminates a cast.
- Use moves[] only if needed; a single move can use goal_state directly.
- Declare loop induction variable inside its control statement.
- Remove retval in favor of direct returns.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2137 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add handle_interface_list_command, used by handle_interface_command.
- Display output of new list to command console.
- Change first index of displayed drivers to 1; it's only cosmetic.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Reduce indent: invert logic of strcmp test.
- Reduce scope: declare variables upon first use in loops.
- Reduce unsaid: compare end of table with NULL.
- Remove superfluous braces around blocks with one statment.
- Improve language that introduces the list of built-in drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2128 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add todo for removing keep_alive: is this a layering violation?
- Use jtag_set_error instead of accessing jtag_error directly.
- Remove superfluous retval temporary variable and empty return.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2127 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use jtag_set_error instead of accessing jtag_error directly.
- Improve error language and whitespace.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2125 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use jtag_set_error instead of accessing jtag_error directly.
- Wrap function arguments to fit everything in 80 columns.
- Move retval variable to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2121 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use jtag_set_error instead of accessing jtag_error directly.
- Wrap function arguments to fit everything in 80 columns.
- Move retval variable to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2120 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use jtag_set_error instead of accessing jtag_error directly.
- Wrap function arguments to fit everything in 80 columns.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2119 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Use jtag_set_error instead of accessing jtag_error directly.
- Wrap and rename function arguments to fit everything in 80 columns.
- Move retval variable to location of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2118 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add static inline jtag_error_clear helper to return and clear jtag_error.
- Use new helper to shrink body of function to two lines.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2117 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make command argument require exactly one argument; do not allow extras.
- Remove superfluous whitespace at end of function.
- Wrap function arguments to fit in 80 columns.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2115 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make command require exactly two arguments; do not allow more than two.
- Move temporary variable declarations closer to point of first use.
- Remove superfluous braces around single statments.
- Wrap to 80 column width.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2114 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add support to display the reset delays too, like the other commands.
- Always show the values, so users can see if they are being redundant.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2113 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Fixes for error handling:
- Return a syntax error instead of calling exit(-1).
- Return error when more than one argument is provided too.
- Remove useless braces and indent after the if/return statements.
- Wrap function arguments to fit in 80 columns.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2111 b42882b7-edfa-0310-969c-e2dbd0fdcd60
should return the "is it backed up?" flag, not the work area size.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2108 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Don't let disabled TAPs be set as the current target
- Improve "targets" output:
* Remove undesirable "chain position" number; we discourage using them
* TAP and Target column updates:
+ make them long enough for current usage
+ improve labels, removing guesswork
+ "TapName" label patches scan_chain output
* Highlight the "current" target
* Display "tap disabled" as a new pseudo-state
* Update docs accordingly
git-svn-id: svn://svn.berlios.de/openocd/trunk@2107 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Try to disambiguates minidriver options from "standard" driver options.
- Make minidummy symbols more explict about being a minidriver.
- Move minidummy.c into minidummy directory to put it with its header.
In configure.in:
- Improve configuration option to allow new minidriver implementations:
- Change option from --enable-minidummy to --enable-minidriver-dummy.
- Move it to the end of the list of options.
- Provides a clear pattern for future minidrivers.
- Update handling of HAVE_JTAG_MINIDRIVER_H:
- Check for external jtag_minidriver.h only with --enable-ecosboard.
- Otherwise, define it when --enable-minidriver-dummy is provided.
- Add check to ensure only one minidriver is enabled.
- When a minidriver is enabled, warn user that standard drivers are not built.
- Use proper AC_DEFINE semantics with MINIDRIVER_DUMMY.
In src/jtag/Makefile.am:
- Restructure handling of minidummy source files.
- Include minidummy driver header in the distribution.
In src/jtag/jtag.c:
- Restructure preprocessor logic to include:
- only one minidriver, or
- all configured standard drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Let disabled targets be ignored during normal operation:
- In target_examine(), ignore disabled TAPs
- Reset handling must not poke at them either:
* fail $target_name arp_* operations on disabled TAPs
* in startup.tcl, don't even issue the arp_* wait ops
ZW: removed superfluous braces from the patch to target.c.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Limit scope: move tap and bit_count variables to point of first use.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2090 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor TAP ID matching into new helper function.
- Simplifies the main jtag_examine_chain loop logic considerably.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2089 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Minor whitespace and style cleanups in body of jtag_examine_chain.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2088 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add helper to check for the terminating ID during jtag_examine_chain.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2087 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor end-of-chain verfication into new helper routine.
- Change 'unexpected' local variable name to 'triggered' and type to bool.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2086 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor output of accepted/incorrect/expected TAP IDs into static helper.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2085 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Reduce indent: invert logic test for unexpected TAP (no IDs).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2081 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Reduce indent: invert logic test for tap in jtag_examine_chain.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2080 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move definition of maximum JTAG chain size closer to its only uses.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2079 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move JTAG EXTRACT macros out from the middle of jtag_examine_chain.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2078 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Merge declaration of state with first use.
- Unindent and remove unnecessary 'else' block.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2077 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Purely mechanical transformations to the source files.
- Rename 'jtag_all_taps' as '__jtag_all_taps.'
- Frees original symbol name to rename the accessor function.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2061 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor jtag_tap_init() helper out of the end of jim_newtap_cmd.
- Factor jtag_tap_free() helper out of the error case in jim_newtap_cmd.
- Invert test to improve indentation at the end of jim_newtap_cmd.
- Improve whitespace in the newly factored functions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2056 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move jtag_tap_name to same location as other TAP functions; export it.
- Factor new jtag_tap_add() from jim_newtap_cmd(); appends TAP to global list.
- Move static chain position counter to global; use in jtag_NumTotalTaps().
- Use jtag_AllTaps for reading tap list, instead of accessing global directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2055 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- set TAR size to 12 bits for Cortex-M3.
- Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].
git-svn-id: svn://svn.berlios.de/openocd/trunk@2051 b42882b7-edfa-0310-969c-e2dbd0fdcd60
this fn has something to do with the queue, which it does not as such.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2050 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove pernicious whitespace from ft2232 driver; as usual,
end-of-line noise, but here also much line-internal stuff.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2038 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Minor cleanup of FT2232:
- make Olimex glue warn about Olimex issues instead of JTAGkey issues;
- make some data static+const;
- don't export some internal symbols.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2037 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove pernicious whitespace from src/jtag/*c files; mostly
the end-of-line flavor for now, although there's more.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2036 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Cloned the src/jtag/jtag.c file to src/jtag/interface.c.
- For each for of those files, deleted the contents of the other.
- Add new source file to automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2012 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move the jtag_interface structure definition.
- Move the Cable API declarations.
- Add new header file to automake input.
The next patch will move the implementation to interface.c.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2008 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Wraps all minidriver API functions using API front-ends:
- Outlines jtag_add_dr_out() and jtag_alloc_in_value32().
- Adds interface_ prefix to existing jtag_alloc_invalue_32 routines.
- Re-inline these interface definitions in new header file.
- Re-inline parts of the (mini)driver implementations in minidriver.h.
- Replace INCLUDE_JTAG_MINIDRIVER_H with #include directives.
The next patch will finish removing '#ifdef HAVE_JTAG_MINIDRIVER_H'
from jtag.h.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2006 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- change SWJDP_IR/DR_APACC to DAP_IR/DR_APACC to conform with ARM_ADI docs.
- add swjdp->memaccess_tck field and code for extra tck clocks before accessing memory bus
- Set default memaccess value to 8 for Cortex-M3.
- Add dap memaccess command.
- document all armv7 dap cmds.
- Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].
git-svn-id: svn://svn.berlios.de/openocd/trunk@2005 b42882b7-edfa-0310-969c-e2dbd0fdcd60
v5/6 jlink seems to have an issue if the first tap move is not divisible by 8, so we send a TLR on first power up
git-svn-id: svn://svn.berlios.de/openocd/trunk@2004 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Initial support for FT2232H/FT4232H devices from FTDI.
- Add --enable-ftd2xx-highspeed option to configure script.
- Original patch submitted by Joern Kaipf <lists@joernline.de>.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1998 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Moves references to global jtag interface to default core implementation.
- Missed this reference in the earlier "pointless" patch. Mea culpa.
Important: this has a side-effect. Previously, the error return inside
the interface routine short-circuited the remainder of that function
when 'init' has not been called. With this patch, the command queue
will be cleared in the case that 'init' has been called. Since that
case indicates a buggy script, this does not seem to be a problem.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1995 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add jtag_callback_queue_reset() to reset the callback queue.
- Make interface_jtag_execute_queue() use new helper function.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1994 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make interface_jtag_execute_queue call new helper function.
- Add default_interface_jtag_execute_queue to wrap jtag interface access.
This patch may look useless on its own, but it helps to isolate the core
JTAG variables from the interface_jtag_* routines, so the later can be
moved into jtag_driver.c in a pending patch.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1993 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Rename last_command_pointer as next_command_pointer, because this variable
stores the address where jtag_queue_command() will store a command pointer.
- Make that variable static, since it is only used internally in jtag.c.
- Remove superfluous accessor for that now-static variable.
- Deobfuscate use of variables in jtag_command_queue.
- Add jtag_command_queue_reset helper function.
- Use it in interface_jtag_execute_queue.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1992 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor jtag_add_scan_check to call new jtag_add_scan_check_alloc helper.
- Use conditional logic to define two versions of the helper.
- These helpers will be moved to other files in future patches.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1989 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the TCL "drscan" and "irscan" commands finish in RUN/IDLE
unless the user specifies otherwise ... usually they'd choose
something like DRPAUSE or IRPAUSE, avoiding RUN/IDLE.
The current "end" state is whatever the preceding commands left
in "cmd_queue_end_state", which to TCL scripts isn't knowable.
This change should forestall various surprises/bugs.
Also check that any "end" state specified is safe in case this
adapter's JTAG clock is free-running. For now, just issue a
warning; eventually a hard failure is probably correct.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1988 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Whitespace fixes in jtag.c ... mostly end-of-line crap.
Flag "jtag_device" command as obsolete in its helptext.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove broken whitespace ... mostly at end of line, but
also in some cases blocks of inappropriate empty lines.
And spell "comamnd" right. :)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1972 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1971 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1969 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->{add,remove}_{break,watch}point.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1967 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all accesses to target->type->name.
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1966 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->get_gdb_reg_list.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1964 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->bulk_write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1963 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1962 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->run_algorithm.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1961 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1960 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->read_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1959 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix buffer overrun in mdw; final '\0' would overflow the output buffer.
- return ERROR_COMMAND_SYNTAX_ERROR instead of ERROR_OK if:
- less than one argument is provided
- the command is called with a name other than mdb, mdh, or mdw.
- factor all command output into new handle_md_output function
git-svn-id: svn://svn.berlios.de/openocd/trunk@1958 b42882b7-edfa-0310-969c-e2dbd0fdcd60
The debugging code in jlink_tap_execute() called when _DEBUG_USB_COMMS_ is
defined was using the entire cached scan length to print the results
buffers, and not the correct length of each individual buffer.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1955 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- wordsize will always be 1, 2, or 4 due to preceeding switch statement.
- move call to keep_alive after successful writes, not upon failures
git-svn-id: svn://svn.berlios.de/openocd/trunk@1953 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add jtag_interface_quit, factored from exit_handler() in openocd.c.
- Remove its extern declaration.
- Add static keyword to its definition.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1952 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Provide basic documentation on the ARM ETM and ETB trace commands.
Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code. (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)
Note that I'm still not sure whether the ETM support works. But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.
ZW: whitespace changes were split out of this patch but will follow.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1945 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make it so the magic "reset_config" keywords can be provided in any
order. This eliminates needless error paths, and makes it easier
to define things at the right level (adapter, board, target).
It also includes two other behavioral changes:
(1) When "handle_reset_config" sees a parameter error, it
exits without changing anything. This is best viewed
as a bugfix. (Old behavior: restore defaults, even if
they weren't previously active.)
(2) Only the behaviors that were explicitly specified get
changed. (Old behavior: everything else gets reset to
the "default".) So for example you can now specify SRST
drive requirements without saying anything about the
three unrelated topics you previously had to specify.
That second one might cause confusion for any configs that end
up calling "reset_config" twice, so it will deserve to be called
out in the release notes. (There were no such configurations in
the current OpenOCD source tree.)
Update docs accordingly. Note that at least some versions of
the texi-to-html tools can't handle "@xref{with spaces}", but
those work properly in PDF and in the info files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1944 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- provides low-level information about each flash API interface,
- gives driver authors some documentation about the driver interface,
- updated extensively from the original patch provided by Duane Ellis.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1942 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- cut out the "unknown EmbeddedICE version" message with Feroceon
git-svn-id: svn://svn.berlios.de/openocd/trunk@1934 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Silence errors about keep_alive() not being called frequently enough unless
a gdb session is active or debugging is enabled
git-svn-id: svn://svn.berlios.de/openocd/trunk@1933 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch allows the vsllink to support very large scan sizes in DMA mode.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1926 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch fixes a segfault when TDO was not received in XXR command:
- allocate space for the value and mask anyway
- clear the mask to zero to effectively skip the output comparison step
git-svn-id: svn://svn.berlios.de/openocd/trunk@1915 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Add svf_get_mask_u32 to generate a mask according to bitlen.
Fix this bug in other functions except for svf_check_tdo.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1914 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- add tap_state_svf_name since tap_state_name doesn't use SVF standard names
git-svn-id: svn://svn.berlios.de/openocd/trunk@1912 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Doc (mostly) update for jtag_khz:
- switch to @deffn syntax
- add entry for "jtag_rclk"
- move deprecated "jtag_speed" into collection of deprecated calls
And for ft2232, don't be the only adapter to *log* an error if RTCK
is requested; it's already reported properly, like any other nonfatal
command parameter. "jtag_rclk" just works as expected, without any
scarey messages.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1910 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make startup for the various server ports be quiet, unless
debugging is active: don't emit needless scarey messages.
Update the relevant documentation and its references:
- For these port commands ... cover the default values;
convert to @deffn syntax; include their use outside of
the configuration stage; and alphabetize.
Similar updates to the rest of that small chapter:
- Highlight that there even *IS* a configuration stage, after
which some command functionality is no longer available.
- For GDB commands ... convert to @deffn syntax; alphabetize;
include a missing command (!); add missing helptext (!) for
one non-missing command; update relevant cross-references
and index entries.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1909 b42882b7-edfa-0310-969c-e2dbd0fdcd60
The "Illegal mode for command" diagnostic is deeply useless.
Say "Command '%s' only runs during configuration stage" instead,
letting users know what the real issue is.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1908 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Fix a bug that joined us at the last minute, when an efficient
alloca() call got swapped out for a more portable malloc().
Also log one error, to give a clue in case it appears "in the wild".
git-svn-id: svn://svn.berlios.de/openocd/trunk@1907 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This was forgotten here. All other LPC targets use
this option.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1906 b42882b7-edfa-0310-969c-e2dbd0fdcd60
When the CPU is in the WFI state, the JTAG interface simply doesn't
respond at all and initial tap examination simply fails. Let's simply
do it again when we come around to assert nSRST.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1905 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Update two oddball NAND commands to work with {offset, length}
instead of block numbers, matching the other commands as well
as usage in U-Boot and the Linux-MTD utilities.
Document them accordingly. Update the single in-tree use of
those commands (sheevaplug).
ALSO:
(a) Document the current 2 GByte/chip ceiling for NAND chipsize.
(32 bit offset/length values can't represent 4 GBytes.) Maybe
after the upcoming release, the code can switch to 64-bits.
(b) The "nand check_bad_blocks" should report "bad" blocks. They
are not "invalid" blocks; they're "bad" ones.
(c) Tweak the "nand info" command to handle the "no arguments"
case sanely (show everything, instead of showing garbage) and
not listing the blocksize in hex kbytes (duh).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1904 b42882b7-edfa-0310-969c-e2dbd0fdcd60
NAND support for DaVinci-family drivers, with HW ECC support.
Declare the NAND chip on the DM355 EVM board.
Currently tested on DM355 for Linux interop using the standard
large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4"
work fine. (Using hwecc4 relies on patches that haven't quite
made it through the Linux-MTD bottlenecks yet.)
Not yet tested: 1-bit on small-page (although it's hard to see
how that could fail); 4-bit on small page (picky layout issues);
the "hwecc_infix" mode (primarily for older boot ROMs; testing
there is blocked on having new bootloader code).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1903 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Changes svf_check_tdo function (checks tdo output matches desired values):
- call buf_cmp_mask function to do comparison instead of using a loop.
- fixes a bug when data length is equal to sizeof(int).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1900 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add jtag_execute_queue in jtag_add_reset after interface_jtag_add_reset.
- Use tap_set_state to demark TAP_RESET, instead of cmd_queue_cur_state
- cmd_queue_cur_state needs to be retired.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1892 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Updates to the J-Link interface driver to support more device versions:
- Add capability detection:
- if capable, detect protocol version; otherwise, assume v2 protocol.
- if capable, detect buffer size; otherwise, assume minimal.
- Disable command result queries for devices using v2 protocol.
- Defined and use JTAG2 command with v2 protocol; JTAG3 is v3 protocol.
- Add TCL command to allow explicit setting of J-Link protocol version.
With approval, I revised the patch to make the following changes:
- add static keywords to new jlink-specific variables
- factor calculation of major_version to be more readable
- remove braces around simple one-line statements in if/else clauses
- remove (rather than #if 0) duplicate reset code; it is in SVN
- use &function to be clearer when passing function pointers
- add symbols for EMU_CMD_GET_CAPS bits; do not hard-code constants!
- almost renamed jlink_handle_jlink_hw_jtag_command (seriously?!?!)
- rewrote that function using a switch statement.
- made version request processing easier to understand and modify
- improve alternate endpoint detection:
- make code easier to read by using temporary variables
- eliminate extra level of indentation and redundant logging
- use ternary conditional to select JTAG2 or JTAG3 command
- reverse version test in jlink_usb_message to reduce indentation
- this had the biggest effect in cleaning up this patch
- use C99's ability to declare new/changed variables with less scope
- add spaces around binary operators in new/changed code
- revert other superfluous whitespace/comment style changes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1889 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove un-implemented and dubious "nand copy" command.
Doing this efficiently would mean doing the copying on
the target CPU, instead of back and forth through JTAG.
If anyone ever needs this functionality, that's what
they should implement.
Also, update on-line "help" for "nand dump" to display
its two optional flags; and for "nand write" to display
a recently added flag.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1883 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Improve support for the DM355 EVM board, and eventually other boards based
on DaVinci chips:
- Provide generic "davinci.cfg" to hold utilities that can be reused by
different chips in this family. Start with PINMUX, PSC, and PLL setup.
- DM355 chip support updates: provide a dictionary with chip-specific
symbols, load those utilities.
- Create a new dm355evm board file, with a reset-init event handler
which uses those utilities to set up PLLs and clocks, configure the
pins, and improve the JTAG speed limit.
Also a minor tweak: provide a virtual address for the work area, matching
what the very latest kernels do. It's probably unwise to use OpenOCD while
the MMU is active though.
The DRAM isn't yet accessible, but NAND access is mostly ready.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1881 b42882b7-edfa-0310-969c-e2dbd0fdcd60
the key command_*() helper functions, fixng the bugs that turned up.
Several of these bugs were from misuse of PRIi64; that's for 64-bit
integers, NOT for "long long" or "u64" (which work best with %lld).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1873 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Increase DTC status retry count to avoid problems with STM Primer
git-svn-id: svn://svn.berlios.de/openocd/trunk@1871 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-jtag.c, interface_jtag_add_dr_out():
- use pointer 'field' instead of scan->fields[field_count]
- restructure the main loop to clearly separate the two cases: TAP is not bypassed / TAP is bypassed
(this is to keep the function similar to interface_jtag_add_dr_scan())
- fix bug where only the first output field has its tap field set
- add asserts to verify that target_tap points to the one not bypassed TAP
git-svn-id: svn://svn.berlios.de/openocd/trunk@1867 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-jtag.c, interface_jtag_add_dr_scan():
- use pointer 'field' instead of scan->fields[field_count]
- restructure the main loop to clearly separate the two cases: TAP is not bypassed / TAP is bypassed
- add an assert that each non-bypassed TAP receives at least one field
- add an assert that checks that no superfluous input fields were passed
git-svn-id: svn://svn.berlios.de/openocd/trunk@1866 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-jtag.c, interface_jtag_add_ir_scan():
- use pointer 'field' instead of scan->fields[nth_tap]
- add assertion to ensure that input data has correct size for TAP's IR
git-svn-id: svn://svn.berlios.de/openocd/trunk@1865 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- jtag.c: consolidate output scan field initialization in scan functions
- jtag.c: add cmd_queue_scan_field_clone() to handle 1:1 field copies
- jtag.c: fix bug where only the first output field in a dr scan has its tap field set
git-svn-id: svn://svn.berlios.de/openocd/trunk@1864 b42882b7-edfa-0310-969c-e2dbd0fdcd60
zwelch
oharboe
ntfreak
duane
kc8apf
mifi