Use the new mapping interfaces in the debug entry path.
SPSR and the banked registers now have smaller and faster
accessors ... use them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In target_type.h it's documented that the target must be
halted for add_breakpoint() ... and with slight ambiguity,
also for its add_watchpoint() sibling. So rather than
verifying that constraint in the CPU drivers, do it in the
target_add_{break,watch}point() routines.
Add minor paranoia on the remove_*point() paths too: save
the return value, and print it out in in the LOG_DEBUG message
in case it's nonzero.
Note that with some current cores, like all ARMv7 ones I've
looked at, there's no technical issue preventing watchpoint or
breakpoint add/remove operations on active cores. This model
seems deeply wired into OpenOCD though.
ALSO: the ARM targets were fairly "good" about enforcing that
constraint themselves. The MIPS ones were relied on other code
to catch such stuff, but it's not clear such code existed ...
keep an eye out for new issues on MIPS.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Just make these fail, instead of letting them write over
potentially random memory. Users should be able to work
around the lack of real implementations by disbling the
MMU by hand ... until someone provides a Real Fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Uses chaining of command_registration structures to eliminate all
target_type register_callback routines. Exports the command_handler
registration arrays for those target types that are used by others.
Have arm_set_cpsr() handle the two core state flags, updating
the CPU state. This eliminates code in various debug_entry()
paths, and marginally improves handling of the J bit.
Catch and comment a few holes in the handling of the J bit on
ARM926ejs cores ... it's unlikely our users will care about
Jazelle mode, but we can at least warn of Impending Doom. If
anyone does use it, these breadcrumbs may help them to find
the right path through the code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Define arm_reg_current() ... returning handle to a given register,
and encapsulating the current mode's register shadowing. It's got
one current use, for reporting the current register set to GDB.
This will let later patches clean up much ARMV4_5_CORE_REG_MODE()
nastiness, saving a bit of code.
Define and use arm_set_cpsr() ... initially it updates the cached
CPSR and sets up state used by arm_reg_current(), plus any SPSR
handle. (Later: can also set up for T and J bits.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Stash a pointer to the CPSR in the "struct arm", to help get rid
of the (common) references to its index in the register cache.
This removes almost all references to CPSR offsets outside of the
toplevel ARM code ... except a pair related to the current ARM11
"simulator" logic (which should be removable soonish).
This is a net minor code shrink of a few hundred bytes of object
code, and also makes the code more readable.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Implementations need to access the register struct they modify;
make it easier and less error-prone to identify the instance.
(This removes over 10% of the ARMV4_5_CORE_REG_MODE nastiness...)
Plus some minor fixes noted when making these updates: ARM7/ARM9
accessor methods should be static; don't leave CPSR wrongly marked
"dirty"; note significant XScale omissions in register handling;
and have armv4_5_build_reg_cache() record its result.
Rename "struct armv4_5_core_reg" as "struct arm_reg"; it's used
for more than those older architecture generations.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Create a generic register_cache_invalidate(), and use it to
replace three all-but-identical core-specific routines:
- armv4_5_invalidate_core_regs()
- armv7m_invalidate_core_regs
- mips32_invalidate_core_regs() too.
Make cache->num_regs be unsigned, avoiding various errors.
Net code shrink and simplification.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Updates all command parsing of simple "enable" and "disable" arguments.
A few case in the tree use a tri-state or extended arguments, which
cannot use this simple macro.
Simlifies the xscale icache/dcache command handler logic.
Add a new is_arm_mode() predicate, and use it to replace almost
all calls to current armv4_5_mode_to_number().
Eventually those internal mode numbers should vanish... along
with their siblings in the armv7a.c file.
Remove a handful of superfluous checks ... e.g. the mode number
was just initialized, or (debug entry methods) already validated.
Move one of the macros using internal mode numbers into the only
file which uses that macro. Make the tables manipulated with
those numbers be read-only and, where possible, static so they're
not confused with part of the generic ARM interface.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add and use arm_mode_name() to map from PSR bits to user
meaningful names. It uses a new table which, later, can
be used to hold other mode-coupled data.
Add definitions for the "Secure Monitor" mode, as seen on
some ARM11 cores (like ARM1176) and on Cortex-A8. The
previous mode name scheme didn't understand that mode.
Remove the old mechanism ... there were two copies, caused
by Cortex-A8 needing to add "Secure Monitor" mode support.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
No need to indirect from registered integers to pointers.
Just stash the pointers directly in the register struct,
and don't even bother registering.
This is a small code shrink, speeds register access just
a smidgeon, and gets rid of another rude exit() path.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use size_t instead of uint32_t when specifying file sizes. Update all
consumers up through the layers to use size_t when required. These
changes should be safe, but the higher-levels will need to be updated
further to receive the intended benefits (i.e. large file support).
Add error checking for fileio_read and file_write. Previously, all
errors were being silently ignored, so this change might cause some
problems for some people in some cases. However, it gives us the chance
to handle any errors that do occur at higher-levels, rather than burying
our heads in the sand.
Same deal: "register.h" got needlessly included all over the
place because of being in a few widely included headers.
So take it out of the header files which included it, and put
it in files which use it ... reduce needless interdependencies.
Also, don't need that extra "types.h" inclusion.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most files in the tree seem to have ended up including this,
and *quite* needlessly ... only code implementing or using
breakpoints actually needs these declarations.
So take it out of the header files which included it, and put
it in files which use it ... reduce needless interdependencies.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The arm7_9_checksum_memory() and arm7_9_blank_check_memory()
routines are not actually specific to the ARM7 and ARM9 core
generations ... they can work for any core which can run
algorithms using basic ARM (not Thumb) instructions.
Rename them; move the declarations to a more generic site;
likewise move the code (and tidy it a bit in the process).
NOTE: the blank_check() method falsely returned a success
status (0) on one error path, when the algorithm failed.
Fixed this bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
We have too many different registers, and too many version and
context dependent interpretations, for this type of bitfield
management to be scalable.
(Anyone who really wants bitfield interpretation *can* do that
in Tcl code...)
There are ... quite a few copies of the same ARM dummy registers.
There should eventually be one copy; this many is craziness.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use target_to_xscale(), replacing needless pointer traversals
and simplifying a bunch of code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell
Marek Vasut
Zachary T Welch