Commit Graph

9 Commits

Author SHA1 Message Date
Tarek BOCHKATI b8fd9aecb1 stm32l4x: add OTP support for STM32 G0/G4/L4/L4+/L5/WB/WL devices
this is a rework of #5320 started by Andreas then abandoned.

same syntax as in stm32f2x driver:

  enable OTP for writing
  > stm32l4x otp 1 enable

  write to OTP
  > flash write_bank 1 foo.bin 0
  > flash filld 0x1FFF7000 0xDeadBeafBaadF00d 1

  read OTP
  > mdw 0x1FFF7000 4

  disable OTP
  > stm32l4x otp 1 disable

Change-Id: Id7d7c163b35d7a3f406dc200d7e2fc293b0675c2
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5537
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:15:38 +00:00
Andreas Bolsch e44539d66c Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface
- write speed up to 150 kByte/s on STM32F469I-disco (due to
  SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI
  with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in
  dual 4-line mode or STM32H73BI-Disco in octal mode
- tested with STM32L476G-disco (64MBit flash, 3-byte addr),
  STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and
  STM32L476G-Disco (all 128Mbit flash, 3-byte addr),
  STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr)
  STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr)
  STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr)
  STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr)
- suitable cfg for Discovery boards included
- limited parsing of SFDP data if flash device not hardcoded
  (tested only in single/quad mode as most devices either don't
  support SFDP at all or have empty(!) SFDP memory)
- 'set' command for auto detection override (e. g. for EEPROMs)
- 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.)
- makefile for creation of binary loader files
- tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg
- tcl/board/stm32f7discovery.cfg removed as name is ambiguous
  (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg)
- dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q
  with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI
  with two W25Q128FV, sample cfg files included and on STM32H745I-Disco,
  STM32H747I-Disco, STM32H750B-Disco
- read/verify/erase_check uses indirect read mode to work around silicon bug in
  H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last
  bytes causes debug interface to hang)
- octospi supported only in single/dual 1-line, 2-line, 4-line
  and single 8-line modes, (not in hyper flash mode)

Requirements:
GPIOs must be initialized appropriately, and SPI flash chip be configured
appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip
specific, cf. included cfg files. The driver infers most parameters from
current setting in CR, CCR, ... registers.

Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: http://openocd.zylin.com/4321
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
2020-11-08 22:46:00 +00:00
Antonio Borneo 38ac08c1c2 tcl: replace the deprecated commands with "adapter ..."
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29 06:34:43 +00:00
Matthias Welwarsky 2231da8ec4 target: restructure dap support
- add 'dap create' command to create dap instances
- move all dap subcmmand into the dap instance commands
- keep 'dap info' for convenience
- change all armv7 and armv8 targets to take a dap
  instance instead of a jtag chain position
- restructure tap/dap/target relations, jtag tap no
  longer references the dap, daps are now independently
  created and initialized.
- clean up swd connect
- re-initialize DAP also on JTAG errors (e.g. after reset,
  power cycle)
- update documentation
- update target files

Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4468
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30 09:58:21 +01:00
Juha Niskanen 753cf12700 stm32l4: support flashing L45x/46x devices
Also fixes incorrect comment about MSI range.

Change-Id: If1339a00e50db44195dfcd5c767ba3f5d9035451
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
Reviewed-on: http://openocd.zylin.com/4122
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-05-08 18:07:41 +01:00
Andreas Fritiofson d3445cd146 cfg: Don't check BS TAP IDCODE in STM32 configs
Instead of updating these regularly we can just accept any IDCODE for the
boundary scan TAP.

The only downside might be that it's not immediately obvious if you
source a config for the wrong type of STM32.

Change-Id: I96d4d81699a491b3a46de3f0d3fd078ffddad4e4
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3385
Tested-by: jenkins
2016-11-04 21:18:21 +00:00
Uwe Bonnes 20466e5374 tcl/target/stm32l4x.cfg: Reduce adapter speed before reset.
Change-Id: I200286c0b980369f74e8f1e497bc5e565ddb616d
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3366
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13 09:26:42 +01:00
Uwe Bonnes 44a6362b20 stm32l4x.cfg: Fix RCC_CR address.
Change-Id: I7a63d24a495e28bc01b5e6603f15b88e075878b8
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3489
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-20 21:13:52 +01:00
Uwe Bonnes f3be0f6071 stm32l4: Add cpu and stm32l4discovery board configuration.
Change-Id: I20d3fcee04516eb3b9bb22933e7e366eed0c0b2e
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2942
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 20:21:06 +00:00