interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
10,270 Commits 69 Branches 14 Tags 90 MiB
Commit Graph

5 Commits

Author SHA1 Message Date
Antonio Borneo e6505b0489 tcl/target: add SPDX tag 
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl/ target| while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
 2022-06-24 21:53:35 +00:00
Marc Schink b27173d563 tcl: Remove executable bit 
Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5419
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
 2020-02-08 23:27:18 +00:00
Antonio Borneo 38ac08c1c2 tcl: replace the deprecated commands with "adapter ..." 
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
 2020-01-29 06:34:43 +00:00
Edward Fewell f56e28b2c8 flash/nor: update CC26xx/CC13xx support 
Added fixes found in additional code reviews.

Remove inappropriate use of bank_number field and updated
documentation to reflect the change.

Restored functionality to cc2538.cfg file because previous
change removed the cc26xx.cfg file because the flash support
changes made it obsolete. Rolled the previous cc26xx.cfg
file into cc2538.cfg and updated it to work with other
recent changes.  Tested using a SmartRF06 Evaluation
board with embedded XDS100v3 and external XDs110.

Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4787
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
 2018-12-11 13:27:17 +00:00
Jacob Palsson 45a86f8e2a tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) 
Added support for the Cortex-M3 based TI low power RF SoC CC2538 and
the CC26xx family.

These chips need a start sequence for switching from cJTAG to JTAG
before being used with OpenOCD, this is done in the tcl proc
ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config.

The configs for CC2538 and CC26xx run the start sequence on post-reset
event and set the ICEPick IDCODE in the data register for OpenOCD to
read, this is done so that every time OpenOCD resets the device, it
will enable JTAG.

Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc
Signed-off-by: Jacob Palsson <jaaacke@gmail.com>
Reviewed-on: http://openocd.zylin.com/2232
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
 2015-02-11 15:22:40 +00:00