Commit Graph

6808 Commits

Author SHA1 Message Date
Alex Ray 248b85a6e7 Disable multiprocessor-id read on ARMv7-R cores
ARMv7-R cores are largely uniprocessor-configured, and when they are
multiprocessor-configured the format of the MPIDR register isn't
compatible with ARMv7-A cores.

Change-Id: I024ec514496fbab5075c6fb34b6acd870e68e1fc
Signed-off-by: Alex Ray <a@machinaut.com>
Reviewed-on: http://openocd.zylin.com/2096
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01 17:37:56 +00:00
Paul Fertser 9744a2fa20 src/target: select the last created target as current
Configuration commands assume the last created target is the one they
should be applied to. An example of this is sourcing an stm32f1.cfg
several times to access several microcontrollers on the same JTAG chain
where cortex_m reset_config should apply to the target that was just
created, not to the first one.

This fixes http://sourceforge.net/p/openocd/tickets/71/ .

Change-Id: I1ca41cc05fe5f36c4bc62dde4614da1405754fd8
Reported-by: Michael Eischer <mieischer@users.sf.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2142
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-01 17:36:41 +00:00
Paul Fertser fb5e099af8 jtag/drivers/stlink: allow to reconnect seamlessly after polling failure
If the communication with the target was failing (either because of an
intermittent connection or the target was rebooted), this is needed to
reestablish operational state.

Reported-by: Tim Sander <tim@krieglstein.org>
Tested-by: Tim Sander <tim@krieglstein.org>
Change-Id: I91ea2e2b2b5ef8eb27dfe9bae95ef2a919f67e4e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2152
Tested-by: jenkins
Reviewed-by: Tim Sander <tim@krieglstein.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-01 17:28:49 +00:00
Paul Fertser cd74dd2891 target: reexamine after polling succeeds again
If polling was failing, it likely meant that either the target was
disconnected or rebooted. In the latter case it needs to be reexamined
to be properly configured for the debug session, so do it just in
case.

Reported-by: Tim Sander <tim@krieglstein.org>
Tested-by: Tim Sander <tim@krieglstein.org>
Change-Id: I5b067c18d9276d4e86cc59739f196ae7d0931622
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2151
Tested-by: jenkins
Reviewed-by: Tim Sander <tim@krieglstein.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-01 17:28:18 +00:00
Andrey Smirnov 8f9cea457d adi_v5_cmsis_dap: Fix logging order of appearance
Move logging for cmsis_dap_queue_ap_read/write to happen after a call
to cmsis_dap_ap_q_bankselect so that that SWD operation would appear
in the log in the same sequence they happen on the bus.

Change-Id: Ic046bc753e661da7924b019c9100d6932fb686bf
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2087
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-06-01 17:01:46 +00:00
Andrey Smirnov d80123f20b arm_adi_v5: Do not ignore register polling timeout
Previous to this commit 'ahbap_debugport_init' would ignore if timeout
happened or not when waiting for CDBGPWRUPACK and CSYSPWRUPACK and would
continue initialization regardless. It also would not reset the
timeout counter after finishing polling for CDBGPWRUPACK and starting
for CSYSPWRUPACK which could potentially cause some problems.

Also refactor code of both snippets into a more generic function to
avoid duplication.

Change-Id: I16e4f50e6819e08c4126e71ef8cec7db559d608e
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2086
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-06-01 17:01:37 +00:00
Andrey Smirnov d007764fe8 arm_adi_v5: Add convenience "atomic"" function for DP reads
Add convenience "atomic"" function dap_dp_read_atomic_u32()

Change-Id: Ic9ebb58959d2f14bbf03be42a26b0fe58ecfeddb
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2085
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01 17:01:14 +00:00
Paul Fertser 930e41a292 configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
Blaster II should depend on the corresponding symbol, not on libusb-1
presence.

Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2159
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-31 12:07:44 +00:00
Paul Fertser f97678f3a6 flash/nor/stm32f1x: add support for F04x parts
Ref. RM0091 Rev.6.

Change-Id: I13bcdb1741edc59712e4fa1849fff38d17709fa7
Reported-by: efuentes@irc.freenode.net
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2150
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-31 12:05:25 +00:00
Paul Fertser 558279c1bb server: fix confusing wording for incoming tcp connections
Change-Id: I40d5de322f3fc38097e04ce538b0fc2b136e0d6a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1937
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-31 12:04:31 +00:00
Paul Fertser ba21fec2aa target/mips32_pracc: fix C99 format specifiers
Warnings exposed by arm-none-eabi build.

Change-Id: Icdaf168d7aaa1a62bdfd41a64e43ef94816d3721
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2140
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-31 12:02:28 +00:00
Ivan De Cesaris 74889cf468 quark_x10xx: cleanup of LOG format specifiers
Fix for LOG format specifiers, this is a superset of those
exposed by the arm-none-eabi build.

Add 0x prefix for all values printed in hex.

Add LOG messages for error cases when enabling or disabling
paging.

Change-Id: I070c556e0ad31204231a2b572e7b93af22a9bc61
Signed-off-by: Ivan De Cesaris <ivan.de.cesaris@intel.com>
Reviewed-on: http://openocd.zylin.com/2149
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-05-31 12:01:31 +00:00
Aurelien Jacobs 970a12aef4 lpcspifi: setup a valid stack pointer before calling ROM code using stack
The spifi_init_code blob is calling the spifi_init() function from the ROM.
This ROM function is making use of the stack. So if the stack pointer is
invalid, trying to execute this code leads to a double fault and the
target_run_algorithm() call return with an error.
This patch simply ensure that the stack pointer is properly setup before
calling the spifi_init() ROM function.

Change-Id: I42a2163cfc2c6dfe5ada97ae8eb2bb6d2e283ff7
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/1836
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-16 07:15:31 +00:00
Yegor Yefremov 1a06fc6047 KS869x: add new target
This patch adds Micrel's KS869x target. The configuration was taken from
http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's
FTP server i.e. their OpenOCD 7.0 package.

The only change compared to the original file is the removal of
reset configuration, as it belongs to the board configuration.

Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-on: http://openocd.zylin.com/2125
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-16 07:10:04 +00:00
Andrey Smirnov 46101959a6 kinetis: Revise CPU un-securing code
Old version of the code had several problems, among them are:
 * Located in a generic ADI source file instead of some Kinetis
   specific location
 * Incorrect MCU detection code that would read generic ARM ID
   registers
 * Presence of SRST line was mandatory
 * There didn't seem to be any place where after SRST line assertion
   it would be de-asserted.
 * Reset was asserted after waiting for "Flash Controller Ready" bit
   to be set, which contradicts official programming guide AN4835
 * Mass erase algorithm implemented by that code was very strange:
   ** After mass erase was initiated instead of just polling for the
      state of "Mass Erase Acknowledged" bit the code would repeatedly
      initiate mass erase AND poll the state of the "Mass Erase
      Acknowledged"
   ** Instead of just polling for the state of "Flash Mass Erase in
      Progress"(bit 0 in Control register) to wait for the end of the
      mass erase operation the code would: write 0 to Control
      register, read out Status register ignoring the result and then
      read Control register again and see if it is zero.
 * dap_syssec_kinetis_mdmap assumed that previously selected(before
   it was called) AP was 0.

This commit moves all of the code to kinetis flash driver and
introduces three new commands:

o "kinetis mdm check_security" -- the intent of that function is to be used as
  'examine-end' hook for any Kinetis target that has that kind of
  JTAG/SWD security mechanism.

o "kinetis mdm mass_erase""  -- This function removes secure status from
  MCU be performing special version of flash mass erase.

o "kinetis mdm test_securing" -- Function that allows to test securing
  fucntionality. All it does is erase the page with flash security settings thus
  making MCU 'secured'.

New version of the code implements the algorithms specified in AN4835
"Production Flash Programming Best Practices for Kinetis K-
and L-series MCUs", specifically sections 4.1.1 and 4.2.1.
It also adds KL26 MCU to the list of devices for which this security
check is performed. Implementing that algorithm also allowed to simplify
mass command in kinetis driver, since we no longer need to write security
bytes. The result that the old version of mass erase code can now be
acheived using 'kinetis mdm mass_erase'

Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU.

Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b
Signed-off-by: Andrey Smrinov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2034
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-10 09:15:35 +00:00
Salvador Arroyo 6cadbadb37 mips32: new code for pracc exec
This is only the basic code proposed for mips32_pracc_exec() function.
It checks every pracc address against the expected address when
reading (instruction fetch).
The code expects to start at PRACC_TEXT and any subsequent read address
is obtained by adding 4 to the previous one.
After shifting out all the instructions the code executes a final check.
It checks now for the first pass trough PRACC_TEXT and shift out
only NOP instructions.
A mips core does not need an additional NOP and after the first check
it exits if there is no store access pending.
After shifting out one NOP the core must be reading at pracc text or the
code exits with error.
The code continues shifting out NOPs until all store accesses have
been performed.
After shifting out 10 NOPs it exits with error.
No assumption is made about the number of store instruction shifted out or
the ordering of the store accesses. It only checks that the number of
store accesses is the same as the number of store instructions at dmseg
after execution.
mips32_pracc_read_ctrl_addr() and mips32_pracc_finish() are added to
simpify a bit the code. Fields pa_ctrl and pa_addr are added
in ejtag_info for storing values of pracc control and address.

Change-Id: If6322d5c8cbeadcd4acd3972c0f72c8490f53c34
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1827
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:40:31 +00:00
Salvador Arroyo fcd7b90db6 mips32: cleanups in legacy pracc code
This is the first patch intended to make a more precise pracc check
when running in legacy mode (code executed by mips32_pracc_exec()).
It only makes some cleanups, mostly due to unnecessary code.
With the last cache optimizations for processor access (pa for short)
all the pracc functions generate the code following some rules that
make pa more easily to check:
	There are no load instructions from dmseg. All the read pas are
	instruction fetches. PARAM_IN related stuff is not needed.
	Registers are restored either from COP0 DeSave or from ejtag
	info fields. PRACC_STACK related stuff is not needed any more.
	The code starts execution at PRACC_TEXT and there are no branch or jump
	instruction in the code, apart from the last jump to PRACC_TEXT.
	The fetch address is ever known.
	For every store instruction to dmseg the function code sets
	the address of the write/store pa.
	The address of every store pa is known.
Current code ends execution when reading a second pass through PRACC_TEXT.
This approach has same inconveniences:
	If the code starts in the delay slot of a jump it makes a jump
	to PRACC_TEXT after executing the first instruction. A second pass
	through PRACC_TEXt is read and the function exits without any warning.
	This seems to occur sometimes when a 24kc core is halted in the delay
	slot of a branch.
	If a debug mode exception is triggered during the execution of a
	function the core restarts execution at PRACC_TEXT. Again the function
	exits without any warning.
	If for whatever reason the core starts fetching  at an unexpected
	address the code now sends a jump instruction to PRACC_TEXT, but due
	to the delay slot the core continues fetching at whatever address + 4
	and a second jump instruction will be send for execution. The result
	of a jump instruction in the delay slot of another jump is
	UNPREDICTABLE. It may work as expected (ar7241), or let the core in
	the delay slot of a jump to PRACC_TEXT for example. This means the
	function called next may also fail (pic32mx).

Change-Id: I9516a5146ee9c8c694d741331edc7daec9bde4e3
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1825
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:39:14 +00:00
Salvador Arroyo d7127bfa97 mips: use cp0 DeSave to cache $15 / t7
Near all pracc functions store $15 in DeSave and
restore it when exiting.
There is no need to save it, if mips32_pracc_read_regs()
save this register in Desave when entering debug mode.
mips32_pracc_write_regs() needs to update it when
exiting debug mode.
Other pracc functions must not modify DeSave.
The jump code in the fastdata transfer function needs also
some little modifications.
Remark:
Like in current code the user can read/modify $15
with the cp0 31 commands.

Change-Id: I5b7dfc1b6169da846f5d2dd3ad4209a9da2c3fad
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1565
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:38:46 +00:00
Salvador Arroyo b08306a172 mips: load fast data transfer handler code with mips32_pracc_write_mem()
Currently the code is loaded calling mips32_pracc_write_mem_generic().
Cache synchronization is not performed.
If configured as write back cache there is no chance to execute the
handler. If configured as write through cache and the cache
lines written to are not cache resident (I-side cache miss) may work.
The patch makes possible to execute the handler in a cached active
memory segment (mainly from KSEG0), but nothing else. The data
is still loaded without performing cache synchronization, code loaded
may not be executable.
Performance may not be faster. At start, for example, the code resides in
main memory, not in cache, and the core must transfer code from
memory. We can really modify the code to force a wait for the first
transfer like we do with start and end addresses, making sure the code
is cache resident for the rest of the queued transfers.
This can also may happen if we execute code (greater than the I cache size)
and the handler code is evicted from the cache.
Code tested on ar7241.

Change-Id: Iffdb4dae108b872fef0e7bacc5ea99649cdc1630
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1564
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:38:21 +00:00
Salvador Arroyo e9497fbf75 mips: load code in buffer mode
Currently the functions mips32_checksum_memory() and mips32_blank_check_memory()
load the code word by word.
The bug in cache code is a good reason for doing so.
If there is no other reason we can load the code as a buffer to save time.
mips_m4k_write_memory() expect a buffer in target endianness, this is done by
target_buffer_set_u32_array().
Cleaned up exit code.
Tested on ar7241 big endian and pic32mx little endian with verify_image.
Flash erase check only tested in pic32mx.

Change-Id: Ib63ed98732b2e23b058e7349a0a57934b7604905
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1562
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-09 20:37:42 +00:00
Salvador Arroyo 12f4564e88 mips32: optimized cache code for pracc access
Follows the the same rules of optimization used by all pracc functions.
Solves some bugs in previous code and adds support for write through caches.

Change-Id: If88c6738ca8c8197f327f22b766120a24f71b567
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1557
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:35:41 +00:00
Paul Fertser 92ea548aaf Update to the current Jim Tcl
This is a post-release version but hopefully some fixes that went in
are worth it; also the changes here make OpenOCD compatible with stock
0.75 version if a distro maintainer decides to use it.

Change-Id: I7ad1814c7c4868198475cdca4750c3d0ee4f5f8b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2121
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:12:17 +00:00
Paul Fertser dd2e16a9e8 README.OSX: recommend XCode 5 as that's the current version
Using current "Command Line Tools" with XCode 4 is known to provoke
issues (the build "hangs"), see e.g.

http://stackoverflow.com/questions/18667916/xcrun-lipo-freezes-with-os-x-mavericks-and-xcode-4-x

This fixes https://sourceforge.net/p/openocd/tickets/70/ .

Change-Id: I511b347b9388e0e3f1d136b566915021c4b5fbde
Reported-by: n321203 <n321203@users.sf.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2128
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 20:01:40 +00:00
Andreas Fritiofson 4a4f716163 ftdi: Optimize GPIO toggling
Only send the new I/O state for the bytes that changed.

Change-Id: I930edc9518e6019331e68e4756acc5e92dda25a4
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1999
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-09 19:27:50 +00:00
Kamal Dasu 2eb8a31a6b svf: Fix debug and error messages that print hex buffer
Added SVF_BUF_LOG macro to properly print the hex buffer of parsed
string for SIR, SDR, TDI, TDO and MASK. The original debug and error
logs with respect to printing real values were misleading and also
had endianess issues. All the bits are printed now instead of just
u32 values.

Change-Id: Ie89902403bdb61ff458418446c2ca1253ea2a63f
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-on: http://openocd.zylin.com/1964
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-05-05 20:25:10 +00:00
Paul Fertser b1beaa36e2 doc: document [start end] parameters of "profile" command
Change-Id: I56561b08304e5b854a67b06ab6b9cee7a24919b2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2115
Tested-by: jenkins
2014-05-05 20:24:46 +00:00
Andrey Smirnov d92a2ac330 generalplus: Add configuration file for General Plus GP326XXXA series
Add configuration file for General Plus GP326XXXA series. Tested on
GP326833A on GPC-1737B board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Change-Id: I1ad0e22598b01317bbc823870a7a262e9192c595
Reviewed-on: http://openocd.zylin.com/2058
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:23:45 +00:00
Spencer Oliver d9d416f49d armv7a: fix typo in cache_config help text
Change-Id: I48cb83bf56b2f6841c3add68ed94b9f92037357d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2114
Tested-by: jenkins
2014-05-05 20:19:25 +00:00
Paul Fertser b1a1a48b30 Fix some C99 format specifiers
As exposed by arm-none-eabi build, fix the wrong modifiers.

Change-Id: Ia6ce7c5c1d40e95059525c3e5d81b752df2fea7c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2122
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:18:38 +00:00
Ash Charles 66c6665288 Add support for Gumstix AeroCore device
The Gumstix AeroCore board [1] contains a STM32F427 microcontroller.
Schematics for this board will also be made available [2].
The JTAG interface for this chip can be accessed via a USB connection
provided by an FTDI chip (0403:6011).

[1] https://store.gumstix.com/index.php/products/585/
[2] https://pubs.gumstix.com/boards/AEROCORE

Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Reviewed-on: http://openocd.zylin.com/2117
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:14:30 +00:00
Paul Fertser 8fa67bd57d Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27 15:07:08 +04:00
Paul Fertser ca218832bb The openocd-0.8.0 release
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27 14:28:21 +04:00
Spencer Oliver cf094f22ca nrf51: remove dereference of null pointer
found by clang 3.4.

Change-Id: Id499b546f65acd7a719498bc97e33b21d1ba565a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2119
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
2014-04-27 09:16:47 +00:00
Ivan De Cesaris 7bd295953d quark_x10xx: fix IO r/w operations with paging enabled
Paging checking and disabling wasn't present for IO r/w,
so the commands were successful only when paging wasn't
enabled (e.g. EFI boot phase).

Change-Id: I41366c0fadff3ea1eb8a153291f20a46cd9ddec1
Signed-off-by: Ivan De Cesaris <ivan.de.cesaris@intel.com>
Reviewed-on: http://openocd.zylin.com/2118
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27 09:16:30 +00:00
Paul Fertser 7ad635bb68 Restore -dev suffix
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15 09:54:32 +04:00
Paul Fertser 6812993483 The openocd-0.8.0-rc2 release candidate
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15 08:58:20 +04:00
Paul Fertser 186c442f9b NEWS: minor fixes for rc2
Change-Id: Iba04baae4f3278db8b36283574a82c077d28bb4a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2113
Tested-by: jenkins
2014-04-15 04:31:23 +00:00
Paul Fertser 11a1080c00 svf: try to reallocate buffers if they're not enough
On larger FPGAs the default buffer size is not nearly enough;
automatically reallocate it as needed.

Change-Id: Ic8071e8cceddeef897ce76996c029250fd22662b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2099
Tested-by: jenkins
Reviewed-by: Kenneth Lorthioir <ibelimb@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14 18:21:11 +00:00
Seth LaForge 3427cf2b7e cortex_a: fix endiannes issues on TI TMS570
The TI TMS470 and TMS570 series of processors are BE-32 processors,
despite BE-32 not being supported by ARM in the Cortex-R4 core. TI
hacked in BE-32 support, which requires odd swizzling in OpenOCD to
make memory reads and writes function correctly. In particular,
without this change, OpenOCD word reads and writes had the bytes
reversed, and halfword and byte packed reads were reading garbage.
In my testing, this change fixes these problems.

Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74
Signed-off-by: Seth LaForge <sethml@google.com>
Reviewed-on: http://openocd.zylin.com/2064
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14 18:20:36 +00:00
Spencer Oliver 31496c2bed usb_blaster: fix warning: array subscript has type ‘char’
caught by clang 3.4 running on cygwin.

Change-Id: I59f652337334e557fb50374f5270ba9c30392b6e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2100
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-04-14 18:19:56 +00:00
Paul Fertser 151c31785a mips32, dsp563xx: fix segfault on Gdb attach
Since c6216201b2 gdb target description
generation support is enabled by default and it counts on checking
"feature" pointer in reg_list. Both mips32 and dsp563xx neither used
calloc nor explicitly set feature (as it was a newly introduced struct
field).

This patch changes all targets to use calloc for consistency.

Change-Id: I9eceadef8b04aacb108e24ae23cb51ca3009586f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2102
Tested-by: jenkins
Reviewed-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:18:13 +00:00
Paul Fertser cb11564219 configure: presto ftdi driver requires libftdi
Change-Id: I4b04eec5084d4b8129e2aff8f3411c6d92e84431
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2101
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14 18:17:43 +00:00
Paul Fertser 3a590658e9 jtag/drivers/remote_bitbang: use sizeof to determine maximum unix socket path length
Different *nix systems use different constants, so sizeof should be
used instead. This fixes the build on OS X (as sun_path length is
hardcoded to 104 on Darwin).

Change-Id: I1df611383dedcfc6d153ec59b453a895c7d84e94
Reported-by: Xiaofan Chen <xiaofanc@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2095
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14 18:16:52 +00:00
Tim Sander 4835a21dea target: fix incorrect arm cpu monitor mode encoding
According to the "Arm Arch Ref Manual ARMv7-a and ARMv7-R edition" the
CPSR encoding for Monitor mode is 0b10110 (22) not 0b11010 (26) as is
currently used.

Change-Id: I73373a0029a81abc92febf518b88bf0dd4dec1fa
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2081
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Tested-by: jenkins
Reviewed-by: Younes REGAIEG <y.regaieg@gmail.com>
Reviewed-by: Tim Sander <tim@krieglstein.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-04-14 18:15:57 +00:00
Lee Bowyer 47830f0ebf tcl: bcm6348 target config, BT HomeHub v1 board config
Also add the board to the firmware recovery script.

Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0
Signed-off-by: Lee Bowyer <lee@sodnpoo.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2097
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:15:24 +00:00
Andreas Ortmann e2b35204b3 contrib/rpc_examples: add example for python3
Halt, resume, memory read/write are used in various ways.

Change-Id: Ia6727678bfc19cc764f822b739bddaae56e9dc70
Signed-off-by: Andreas Ortmann <ortmann@finf.uni-hannover.de>
Reviewed-on: http://openocd.zylin.com/2000
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-14 18:14:22 +00:00
Paul Fertser b182f934f1 openocd.rules: match CMSIS DAP devices by product string
Since the standard requires to have "CMSIS-DAP" somewhere in product
string, use that to automatically match all the compliant adapters.

Change-Id: I1e2ac088333a7d69a136af825248914339debdd8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2082
Tested-by: jenkins
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:13:30 +00:00
Karl Hammar 7256d6acdf parport: add "aspo" hotpluggable adapter config
This adds a new adapter config.

Design files are available from:

http://turkos.aspodata.se/git/openhw/isp/pp_jtag_arm20.sch
http://turkos.aspodata.se/git/openhw/isp/pp_jtag_arm20.pcb

No need to document it anywhere as only a single device was ever
built.

Change-Id: If031fdb9dedb1e544401747bfb7fbc5afc4d5407
Signed-off-by: Karl Hammar <karl@aspodata.se>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2094
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:13:03 +00:00
Paul Fertser ee54f7e9f0 target/cortex_a: check gdb_service before dereferencing in update_halt_gdb
If gdb was disconnected by the moment the target entered halted state,
update_halt_gdb would segfault.

Change-Id: I67477e9199c1df097be83a49e38602f975c083f5
Reported-by: Younes REGAIEG <younes.regaieg@imag.fr>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2098
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:12:30 +00:00
Paul Fertser 85c1790beb README.OSX: add 10.9 specific hints
Change-Id: I8c684f2964262fb0670ed74fded26676833aee10
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2080
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14 18:11:33 +00:00