from pre/post_reset event scripts. Adding the second parameter was
a mistake seen in retrospect. this gives precise control in post_reset
for *when* the post reset speed is set. The pre_reset event was
added *after* the second parameter to jtag_khz/speed
- the target implementations no longer gets involved in the reset mode
scheme. Either they reset a target into a halted mode or not.
target_process_reset()
detects if the reset halt failed or not.
- tcl target event names are now target_N_name. Mainly internal
at this early stage, but best to get the naming right now.
- added hardcoded reset modes from gdb_server.c. I don't know precisely what
these defaults should be or if it should be made configurable. Perhaps some
hardcoded defaults will do for now and it can be made configurable later.
- bugfix in cortex_m3.c for reset_run_and_xxx?
- issue syntax error upon obsolete argument in target command instead of
printing message that will surely drown in the log
git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
the reset mode argument to the target command is deprecated(ignored w/error message).
git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60
within the last 2000ms.
To fix this, add keep_alive() if you are spending >1000ms in an algorithm
thus holding up the server loop.
target_call_timer_callbacks() invokes keep_alive().
2. post_reset script is now executed at normal JTAG speed and not
reset speed.
3. Resume is now synchronous again. Hopefully it will work this time.
git-svn-id: svn://svn.berlios.de/openocd/trunk@826 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch just uses the command.c interface to create tcl commands for the root level commands and avoids a bit of the "TCL" bleed into the rest of the openocd code.
Multilevel commands also supported.
git-svn-id: svn://svn.berlios.de/openocd/trunk@818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- drscan is now a low level tcl command:
execute DR scan <device> <num_bits> <value> <num_bits1> <value2>
- removed obsolete partial command text support
git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed build warnings for last commit
- set svn props for last commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Log output handlers now get a "const char *line"
- Added "const" to parameter.
src/helper/command.c
src/helper/command.h
- New function: 'command_output_text()'
- Log output handlers now get a "const char *line"
src/helper/options.c
- Log output handlers now get a "const char *line"
src/server/telnet_server.c
- DO not transmit NULL bytes via TELNET.
- Log output handlers now get a "const char *line"
src/server/gdb_server.c
- Log output handlers now get a "const char *line"
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/target/target.c
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/target/target.h
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/openocd.c
- **MAJOR** Work: New TCL/Jim function: mem2array
- **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users.
- Previously: TCL output did not go to GDB.
- Previously: TCL output did not go to TELNET
- Previously: TCL output only goes to control console.
- This fixes that problem.
+ Created callbacks:
+openocd_jim_fwrite()
+openocd_jim_fread()
+openocd_jim_vfprintf()
+openocd_jim_fflush()
+openocd_jim_fgets()
src/Makefile.am
- New TCL files.
- Future note: This should be more automated. As the list of
'tcl' files grows maintaning this list will suck.
src/Jim.c
- ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER **
- that impliments many [format] specifies JIM did not support.
- Jim_FormatString() - **MAJOR** work.
- Previously only supported "%s" "%d" and "%c"
- And what support existed had bugs.
- NEW: *MANY* formating parameters are now supported.
- TODO: The "precision" specifier is not supported.
** NEW ** This patch.
- Jim_StringToWide() test if no conversion occured.
- Jim_StringToIndex() test if no conversion occured.
- Jim_StringToDouble() test if no conversion occured.
** NEW ** This Patch. Major Work.
- Previously output from JIM did not get sent to GDB
- Ditto: Output to Telnet session.
- Above items are now fixed - By introducing callbacks
new function pointers in the "interp" structure.
- Helpers that call the callbacks.
- New function: Jim_fprintf()
- New function: Jim_vfprintf()
- New function: Jim_fwrite()
- New function: Jim_fread()
- New function: Jim_fflush()
- New function: Jim_fgets()
By default: the output is to STDIO as previous.
The "openocd.c" - redirects the output as needed.
- Jim_Panic() - Send panic to both STDERR and the interps
specified STDERR output as a 2nd choice.
- Now JIM's "stdin/stdout/stderr" paramters are "void *"
and are no longer "FILE *".
src/Jim.h
- **MAJOR**
- New JIM STDIO callbacks in the "interp" structure.
- change: "stdin/stdout/stderr" are now "void *" cookies.
- New JIM stdio helper functions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
oharboe
ntfreak
mifi