Commit Graph

4871 Commits

Author SHA1 Message Date
Aaron Carroll aaf145c422 omap4430: fix reset sequence
* Write to the PRM reset control register should have been 'phys';
* Setup empty reset-assert handlers for the M3's, since the board-level reset
  takes care of them;
* Remove the dbginit cruft, because it gets called implicitly on reset.

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-02-02 08:32:10 +01:00
Aaron Carroll efcea8306a cortex_m3: allow scripts to override reset
If a handler for the reset-assert event it present, skip the usual reset
handling.  This is needed, for example, for board-level resets.

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-02-02 08:32:10 +01:00
Øyvind Harboe 859ccccd80 error: remove debug output when reporting errors
The user does not need to know or care about "command handlers".

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-31 12:09:46 +01:00
Øyvind Harboe a0858bfed0 cfi: use ARM32 machine code on all CPUs but Cortex M3
ARM11 broke with aa61a3b3d8
as the code only checked for arm 7/9.

CFI probably needs work for non-ARM targets but perhaps
not adding working area memory to e.g. MIPS will give
the default slow CFI support.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-31 10:30:48 +01:00
Aaron Carroll 4592506b8e TCL configs for OMAP4430 and Pandaboard
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:57:50 +01:00
Aaron Carroll c34e69cb10 cortex_a9: add source files for Cortex A9 support.
add target and build support for A9

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:57:38 +01:00
Aaron Carroll 8e60d4955f arm_dpm: add some SCR/RCR macros
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:53:53 +01:00
Aaron Carroll aea22bdbd1 Add '-coreid' target option to support multiple cores per TAP.
ARM Cortex-A9 multi-core chips expose a single TAP/DAP which connects
to both cores.  The '-coreid' option selects which core the target
should connect to.

Note that at present, OpenOCD can connect to either core, but not both
simulatenously, until ADI contexts can be shared.

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:53:21 +01:00
Aaron Carroll 3fa99ed2bf Add cscope to .gitignore
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:52:42 +01:00
Aaron Carroll 827053c79d openocd.texi: minor fixes in Reset Configuration
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:46:16 +01:00
Mathias K e26bda10bc add cortex-r4 etm id to dap info
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-27 10:33:20 +00:00
Mathias K 6df10184f6 - add xds100v2 configuaration file
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-27 10:32:39 +00:00
Thomas Schmid 4df93cb95f Fixed small mistakes in at91sam3 info command
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26 12:38:27 +00:00
Mathias K 9629adcbde add basic TI xds100v2 support
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26 12:30:35 +00:00
Andreas Fritiofson 5b34018ccd fix segfault from stack corruption in ahbap_debugport_init
ahbap_debugport_init was queueing reads to a local stack variable but
didn't execute the queue before returning. Since the result of the reads
are not used anyway, it's better to pass NULL as the destination instead of
a dummy variable. I changed this throughout the function, even for the
reads that were actually executed.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26 12:14:51 +00:00
Eric Wetzel a727418184 stellaris: automatically generate and update device IDs
Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs

Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs
2011-01-19 08:41:03 +01:00
Erik Botö 4749a40821 Flash driver for em357
Hi,

I took the stm32x NOR flash driver and adapted it for the Ember EM357
chip. This chip is very similar to em351 and stm32w so the driver
should be easily extended to support those as well if anyone can get
their hands on some of those for testing.

changelog:
Added NOR flash driver em357

Best regards,
Erik Botö
2011-01-14 14:56:46 +01:00
Santeri Salko 5b1efd0176 str9xpec: Find flash controller from the chain.
Find the flash controller by position since it is before the core,
not after it.

This fixes the problem that str9xpec enable_turbo (or any other
str9xpec command) did not work. (See my post in
http://forum.sparkfun.com/viewtopic.php?f=18&t=25542)

Signed-off-by: Santeri Salko <santeri.salko@gmail.com>
2011-01-14 14:55:24 +01:00
simon qian 11193c040c transport: fix transport command args gaffe
the wrong index of argv. argv[0] is the command itself,
argv[1] the the transport to select.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-13 08:28:33 +01:00
simon qian 8eb92c7e99 transport: fix LOG_DEBUG gaffe
LOG_DEBUG() arguments are only evaluated when DEBUG logging
is enabled, do not use arguments that have side effects
like foo++.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-13 08:28:29 +01:00
Spencer Oliver 8684bd1342 cfi: fix release build warnings
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-10 09:37:18 +00:00
Eric Wetzel 0535531d27 nit: more LOG_* \n fixes
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages

Remove LOG_INFO_N
LOG_INFO_N was only used once and had a \n at the end

Change LOG_USER_N calls that end with \n to LOG_USER
2011-01-09 21:35:23 +01:00
Freddie Chopin 61e1e525c1 Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-09 21:34:02 +01:00
David Brownell 7ec55eb863 present CM3 Trace agenda 2011-01-09 21:14:57 +01:00
Freddie Chopin 94fa8fd30a Add common LPC2xxx setup procedure, use in all LPC2xxx files.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-07 16:09:31 +01:00
Spencer Oliver aa61a3b3d8 cfi: use safer arch detection
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06 10:35:59 +00:00
Spencer Oliver 7351eecf6a loader: update loader src for armv7-m arch
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06 10:35:02 +00:00
Jonathan Dumaresq 6a1750e961 Add the support for the armv7m arch.
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-06 08:05:02 +01:00
Jonathan Dumaresq 9f408db29d Add the contrib file for the armv7m arch
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-06 08:04:58 +01:00
Eric Wetzel a665ef716a nit: do not add \n at end of LOG_ERROR
Fixed in many other places, and submitted in response to Øyvind's invitation.
2011-01-05 21:46:12 +01:00
Spencer Oliver 0cd84000da mips32: add fastdata loader working area
Add a working area that is preserved between calls to
mips_m4k_bulk_write_memory - this gives us a speed increase
of approx 3kb/sec during flash writes to the pic32mx.

This area is released during a resume/reset.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-04 12:29:49 +00:00
Spencer Oliver dc1c5a7500 target: change working area free data type
We only use the struct working_area member 'free' as a
true/false type so might as well use a bool data type.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-04 09:52:20 +00:00
Øyvind Harboe e8eb5bbc04 nit: do not add \n at end of LOG_ERROR
This is done in many other places as well, patch
to fix gratefully accepted!
2011-01-03 13:37:41 +01:00
Øyvind Harboe c69553cbc5 error handling: the error number is not part of the user interface
Do not propagate error number to user. This is for internal
programming purposes only. Error messages to the user is
reported as text via LOG_ERROR().

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-03 13:33:27 +01:00
Michael Schwingen 1795239cfd actux3.cfg: add function to setup for u-boot debugging
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:17:57 +01:00
Michael Schwingen 09a0a69c09 cfi_protect is not implemented on Spansion flashes (many do not even have protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:15:27 +01:00
Michael Schwingen d8ece229f9 non-CFI flash code uses data from CFI structures. Make sure that timeouts are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:15:08 +01:00
Jon Povey d356034f03 svf: implement sleep for RUNTEST min_time
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>

min_time was effectively ignored, I needed it to program a Lattice MachXO
which uses a RUNTEST to wait for an erase operation, amongst other things.

With this patch pauses happen and I can program the device with an SVF
generated in LSC ispVM (with "Rev D Standard" checked to suppress
nonstandard LOOP statements)
2011-01-02 20:02:16 +01:00
Jon Povey 18a5a46bd9 svf: fix USAGE and related error reporting
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
2011-01-02 20:01:20 +01:00
Antonio Borneo 093ec6656a NAND/S3CXXXX: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:58 +01:00
Antonio Borneo f49283a062 NAND/ORION: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:40 +01:00
Antonio Borneo 5e27647e22 NAND/NUC910: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:26 +01:00
Antonio Borneo 457556b146 NAND/MX3: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:19 +01:00
Antonio Borneo b7b9ad755e NAND/MX2: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:58 +01:00
Antonio Borneo 35c30e9ee7 NAND/LPC3180: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:45 +01:00
Antonio Borneo 3db34f8447 NAND/DAVINCI: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:30 +01:00
Antonio Borneo 2e1f2b50fd NAND/AT91SAM9: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:15 +01:00
Antonio Borneo 5f3603b8ef NAND/TCL: prepare for common "target" reference
Every NAND driver keeps private copy of "target"
structure.
Prepare infostructure to move private "target"
copy in common/shared struct nand_device.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:56:59 +01:00
Antonio Borneo 21a1c6ec33 NAND/TCL: fix segfault on syntax error
Fix segfault if incomplete command "nand device dummy"
is executed.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:54:20 +01:00
Antonio Borneo 7bb79f0f51 NAND/CORE: Comment use of alive_sleep()
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:53:55 +01:00