riscv-openocd

Commit Graph

Author	SHA1	Message	Date
Marc Schink	ae5c438b00	tcl: Adapt config files to new usb_blaster command syntax Change-Id: I4eb645f74ef31fc0b5882299b3487020aa142dd8 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6408 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>	2021-08-14 13:37:29 +01:00
Antonio Borneo	2aa2ed1d8a	tcl: replace command "interface" with "adapter driver" Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>	2020-01-29 05:36:56 +00:00
Franck Jullien	87e91f4db9	jtag/drivers: add USB-Blaster II This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>	2014-01-20 13:28:02 +00:00

Author

SHA1

Message

Date

Marc Schink

ae5c438b00

tcl: Adapt config files to new usb_blaster command syntax

Change-Id: I4eb645f74ef31fc0b5882299b3487020aa142dd8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6408
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

2021-08-14 13:37:29 +01:00

Antonio Borneo

2aa2ed1d8a

tcl: replace command "interface" with "adapter driver"

Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with command
	sed -i 's/^interface /adapter driver /' $(find tcl/ -type f)

Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5283
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

2020-01-29 05:36:56 +00:00

Franck Jullien

87e91f4db9

jtag/drivers: add USB-Blaster II

This patchs adds a new access driver for the existing
USB-Blaster interface driver.

This interface (as it is build-in on the sockit development
board) is composed of a Cypress EZ-USB plus a CPLD.

The Cypress chip as an embedded 8051 microcontroller.
When it's powered up, the firmware is downloaded to the
chip then the device is disconnected and reconnected with
the new firmware.

The USB-Blaster II protocol is almost identicial to
the old one. The only difference is that you need to
send a 0x5F before read TDO back. This command
seems to copy TDO buffer datas to the endpoint buffer.

Driver will be auto enabled if libusb-1.0 is detected.

Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1791
Tested-by: jenkins
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2014-01-20 13:28:02 +00:00

3 Commits