interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

tcl: Adapt config files to new usb_blaster command syntax 

Change-Id: I4eb645f74ef31fc0b5882299b3487020aa142dd8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6408
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Marc Schink 2021-08-01 14:15:06 +02:00 committed by Antonio Borneo
parent 1549bad5b3
commit ae5c438b00
5 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
tcl/board/altera_sockit.cfg
View File

@ -12,7 +12,7 @@ adapter driver usb_blaster
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
#usb_blaster_vid_pid 0x09fb 0x6810
#usb_blaster_device_desc "USB-Blaster II"
#usb_blaster vid_pid 0x09fb 0x6810
#usb_blaster device_desc "USB-Blaster II"
adapter speed 100

2
tcl/board/reflexces_achilles_i-dev_kit_arria10.cfg
View File

@ -6,7 +6,7 @@ if { [info exists USE_EXTERNAL_DEBUGGER] } {
echo "Using external debugger"
} else {
source [find interface/altera-usb-blaster2.cfg]
usb_blaster_device_desc "Arria10 IDK"
usb_blaster device_desc "Arria10 IDK"
}
source [find fpga/altera-10m50.cfg]

6
tcl/interface/altera-usb-blaster.cfg
View File

@ -5,7 +5,7 @@
#
adapter driver usb_blaster
usb_blaster_lowlevel_driver ftdi
usb_blaster lowlevel_driver ftdi
# These are already the defaults.
# usb_blaster_vid_pid 0x09FB 0x6001
# usb_blaster_device_desc "USB-Blaster"
# usb_blaster vid_pid 0x09FB 0x6001
# usb_blaster device_desc "USB-Blaster"

6
tcl/interface/altera-usb-blaster2.cfg
View File

@ -3,6 +3,6 @@
#
adapter driver usb_blaster
usb_blaster_vid_pid 0x09fb 0x6010 0x09fb 0x6810
usb_blaster_lowlevel_driver ublast2
usb_blaster_firmware /path/to/quartus/blaster_6810.hex
usb_blaster vid_pid 0x09fb 0x6010 0x09fb 0x6810
usb_blaster lowlevel_driver ublast2
usb_blaster firmware /path/to/quartus/blaster_6810.hex

6
tcl/interface/usb-jtag.cfg
View File

@ -30,8 +30,8 @@
# driver but ixo-usb-jtag requires the ftdi driver.
adapter driver usb_blaster
usb_blaster_vid_pid 0x16C0 0x06AD
usb_blaster_device_desc "Van Ooijen Technische Informatica"
usb_blaster vid_pid 0x16C0 0x06AD
usb_blaster device_desc "Van Ooijen Technische Informatica"
# ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the
# ftdi modes, using ublast2 will cause openocd to hang.
usb_blaster_lowlevel_driver ftdi
usb_blaster lowlevel_driver ftdi