- Log output handlers now get a "const char *line"
- Added "const" to parameter.
src/helper/command.c
src/helper/command.h
- New function: 'command_output_text()'
- Log output handlers now get a "const char *line"
src/helper/options.c
- Log output handlers now get a "const char *line"
src/server/telnet_server.c
- DO not transmit NULL bytes via TELNET.
- Log output handlers now get a "const char *line"
src/server/gdb_server.c
- Log output handlers now get a "const char *line"
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/target/target.c
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/target/target.h
*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent
previously to the mailing list for TCL users try
src/openocd.c
- **MAJOR** Work: New TCL/Jim function: mem2array
- **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users.
- Previously: TCL output did not go to GDB.
- Previously: TCL output did not go to TELNET
- Previously: TCL output only goes to control console.
- This fixes that problem.
+ Created callbacks:
+openocd_jim_fwrite()
+openocd_jim_fread()
+openocd_jim_vfprintf()
+openocd_jim_fflush()
+openocd_jim_fgets()
src/Makefile.am
- New TCL files.
- Future note: This should be more automated. As the list of
'tcl' files grows maintaning this list will suck.
src/Jim.c
- ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER **
- that impliments many [format] specifies JIM did not support.
- Jim_FormatString() - **MAJOR** work.
- Previously only supported "%s" "%d" and "%c"
- And what support existed had bugs.
- NEW: *MANY* formating parameters are now supported.
- TODO: The "precision" specifier is not supported.
** NEW ** This patch.
- Jim_StringToWide() test if no conversion occured.
- Jim_StringToIndex() test if no conversion occured.
- Jim_StringToDouble() test if no conversion occured.
** NEW ** This Patch. Major Work.
- Previously output from JIM did not get sent to GDB
- Ditto: Output to Telnet session.
- Above items are now fixed - By introducing callbacks
new function pointers in the "interp" structure.
- Helpers that call the callbacks.
- New function: Jim_fprintf()
- New function: Jim_vfprintf()
- New function: Jim_fwrite()
- New function: Jim_fread()
- New function: Jim_fflush()
- New function: Jim_fgets()
By default: the output is to STDIO as previous.
The "openocd.c" - redirects the output as needed.
- Jim_Panic() - Send panic to both STDERR and the interps
specified STDERR output as a 2nd choice.
- Now JIM's "stdin/stdout/stderr" paramters are "void *"
and are no longer "FILE *".
src/Jim.h
- **MAJOR**
- New JIM STDIO callbacks in the "interp" structure.
- change: "stdin/stdout/stderr" are now "void *" cookies.
- New JIM stdio helper functions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
to daemon_startup(still supported).
- print warning if srst and trst change state at the same time when srst_and_trst
is seperate
- reset now performs a trst, examines and validates the jtag chain before targets
assert reset
- if startup fails to examine and validate the jtag chain, try a reset before
trying again
git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added target_init_reset which calls target_process_reset after all drivers have been initialised
git-svn-id: svn://svn.berlios.de/openocd/trunk@284 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- gdb connection not dropped if we fail to allocate memory in query packets
git-svn-id: svn://svn.berlios.de/openocd/trunk@249 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- adds support for the Altium universal JTAG cable
- adds support for "wiggler2" cable (basically a wiggler with added LED, documentation coming soon)
- adds LED support. The LED is turned on during data transfer - works fine on Altium and wiggler2.
- adds PORT_EXIT pattern that is written to port when exiting, in order to turn off power on cables that get their power from parallel port data lines
- move port writes (with the system-specific ifdefs) to one central function
- increased image cache size to 2KB (might require more adaptive cache handling, e.g. LRU)
git-svn-id: svn://svn.berlios.de/openocd/trunk@204 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- usbprog update (thanks to Benedikt Sauter)
- added embeddedice_send and _handshake functions (thanks to Pavel Chromy)
- added support for 4, 8 and 16 bit ports to etb.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@203 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use 'etm trigger_percent' setting when programming ETB trigger count
- fixed some small bugs in ETM trace analysis
- fixed minor bug in flash writing (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin)
- retry JTAG chain validation (thanks to Magnus Lundin)
- reworked GDB packet input handling (thanks to Pavel Chromy)
- output error message when setting a watchpoint failed
- removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added support for usbprog (thanks to Benedikt Sauter)
- make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy)
- register at_exit handler to do necessary unregistering (thanks to Pavel Chromy)
- added dummy ETM capture driver to allow ETM to be registered without a capture driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)
git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This checkin is still experimental, not recommended for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- output all of EmbeddedICE version register in error message
- update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes
- added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot)
- enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware)
git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c
- free working area and register stuff if str7x block write algorithm failed
- check PC after exiting a target algorithm in armv4_5.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch)
- added support for accessing ETB (embedded trace buffer) registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added support for reading IHEX files (through fileio)
- load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex']
- added NAND framework (preliminary)
- added support for the LPC3180 SLC and MLC NAND controllers (preliminary)
- fix initialization for parport
- gw16012 fixes/cleanups
- added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far)
- added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- complain about identify_chain scan with all bits one (jtag communication problem)
- add 0x80000 as a valid size for lpc2000_v2 flash banks (previously only the user accessible 0x7d000 were valid)
git-svn-id: svn://svn.berlios.de/openocd/trunk@129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
oharboe
ntfreak
mifi
drath
bodylove