See section 57.6.1 in RM0432.
Change-Id: Ic4977aee74d1838f420c1d9ff19925d09f8f6e2b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7763
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch adds support for the NXP QN908x family of Bluetooth
microcontrollers, such as the QN9080. This chip features a Cortex-M4F
with 512 KiB of flash on all the available versions, although the
documentation suggests that there might be 256 kB versions as well.
The initial support allows to read, erase and write the whole user flash
area. Three new sub-commands under the new "qn908x" command are added
in this patch as well: disable_wdog to disabled the watchdog,
mass_erase to perform a mass erase and allow_brick to allow programming
images that disable the SWD interface.
Disabling the watchdog is required after a "reset halt" in order to run
the CRC algorithm from RAM when verifying the chip. However, this is not
done automatically on probing or other initialization since disabling
the watchdog might interfere with debugging real applications.
The "mass_erase" command allows to erase the whole flash without
probing it, since in some scenarios the chip can be locked such that no
flash or ram can be accessed from the SWD interface, allowing only to
run a mass_erase to be able to flash the program.
The flashing process allows to compute a checksum, similar to the
lpc2000 driver "calc_checksum" but done over a different region of the
memory. This checksum is required to be present for the QN908x
bootloader ROM to boot, and otherwise is useless. As with the lpc2000
design, verification when using "calc_checksum" is expected to fail if
the checksum was not valid in the image being verified.
This was manually tested on a QN9080, including the scan-view,
AddressSanitizer/UBSan and test coverage configurations.
Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b
Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: iosabi <iosabi@protonmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5584
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Clang is unable to fully track the content of the array
write_buffer[] and incorrectly complains that it could contain
some uninitialized value.
To help clang to track the execution flow, rewrite the handling of
the buffer by using simpler indexing and by moving away cmd_byte
from the first buffer's element to the variable cmd_byte.
While there:
- fix the error codes returned while parsing the command line and
- use directly command_print_sameline() instead of passing through
intermediate buffers.
Change-Id: I1969e896887ea3a4abebee057cc04c03005fa57c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7718
Tested-by: jenkins
Clang 15.0.7 complains about snprintf output truncation due to
output between 13 and 22 bytes into a destination of size 20.
Increase the size of the buffer.
Change-Id: I0369255ca1bc02a0cf494f765e91a608c960a0d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7717
Tested-by: jenkins
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
Trying to disable OTP write protection by running e.g. `flash protect
1 0 1 off` would already be rejected with an error code, but that would
result in a generic "failed setting protection for blocks 0 to 1"
message. Now a more specific error message is also printed, telling the
user why it failed.
Change-Id: I6d4974eb0bcd23a0a6cf68ff955d9e59b8b1b06a
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-on: https://review.openocd.org/c/openocd/+/7615
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
this new STM32 series family introduces 2 devices:
STM32C011xx (0x443) and STM32C031xx (0x453)
both devices have 32 Kbytes single flash bank.
Change-Id: I4e890789e44e3b174c0e9c0e1068383ecdbb865f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6874
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The pointer nand_devices is used in two file.
Move the extern prototype in code.h
Detected through 'sparse' tool.
Change-Id: I7237359fd1a008770a624725cd0b3d8632b4166e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7674
Tested-by: jenkins
Don't use 'extern' in a C file, but declare the exported function
in a H file.
This helps validating the function prototype across declaration
and use.
Detected through 'sparse' tool.
Change-Id: I2c22b084fb513f4b3b1b1db96dfbc8fa4bfe7238
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7666
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nor
driver, that the struct flash_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of flash_driver's declaration in driver.h
Fix some incorrect non-const declaration and remove redundant
forward declarations.
Change-Id: I5e41d094307aac4a57dfa9a70496ff3cf180bd92
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7662
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nand
driver, that the struct nand_flash_controller is declared in the
file as non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of nand_flash_controller's declaration in driver.h
While there, drop the unused/commented boundary scan controller.
Change-Id: I7dc32cef55be13ba537abe0f4c47b135d837126c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7661
Tested-by: jenkins
Add static type to symbols that are not used elsewhere.
Detected through 'sparse' tool.
Change-Id: I2bdac5d2b06a6dbed5c27bfdb1cf36eee90ad823
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7594
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values. Adding a cast to convert it to 64 bits should not
be enough.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: If6be35bd3cbbc7c3a83e0da1407e611f07ff6e06
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7593
Tested-by: jenkins
If the file read abnormally, need to close it which was opened before.
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Change-Id: I6142f154741dcd38088b7add2793219ee4dd2ae9
Reviewed-on: https://review.openocd.org/c/openocd/+/7546
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'flash list' as OpenOCD command.
While there:
- format in a human readable way the output dictionary list, while
preserving the structure of its TCL data;
- add the mandatory 'usage' field.
Change-Id: I1ee69870d3ab3c1cfc46cd2b8ec03de6b2300bd6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7486
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
All DIDs are taken from "SAM R34/R35 Errata Sheet" (DS80000834A).
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: Ie35f58e61bb02919c0676c91938c90192481d995
Reviewed-on: https://review.openocd.org/c/openocd/+/7521
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
According to the datasheets these MCUs have 40Kb RAM.
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: I52b8a0c86035bccd6f3c1a478bb2e558bca4ae86
Reviewed-on: https://review.openocd.org/c/openocd/+/7520
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
A bunch of new SPI flash (Adesto, Cypress, XTX Tech, mainly octal)
IDs and SPI FRAM (Infineon) IDs added. Backward compatible change
of ID interpretation: The previously unused 4th byte now acts
as continuation code (0x7F) count for manufacturer id, cf.
JEDEC JEP106BC. Currently this affects only some recent octal flash
and FRAM devices, which are only supported by stmqspi and cmspi
flash drivers.
Change-Id: Ibdcac81a84c636dc68439add4461b959df429bca
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6929
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Polling the target makes no harm during PSoC 4 flash write in the current
OpenOCD code. Don't mask it.
Change-Id: I6625ded0162ee3a96b92188844d0d2d6c30101c2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7162
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Simply move numicro M0 flash write assembly to contrib/loaders. Also,
modify corresponding Makefile and generated numicro_m0.inc.
To make the path more general, this patch rename the path
"contrib/loaders/flash/numicro_m4" to "contrib/loaders/flash/numicro" as
well.
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I9adea24c2b3c97319a9b015cf50257f3d131dc26
Reviewed-on: https://review.openocd.org/c/openocd/+/7346
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch is picked from the flash part of OpenOCD-Nuvoton's commit
("flash: supported Nuvoton M4 series. jtag: Used HW reset instead of
auto reset. tcl: added a configuration file for Nuvoton M4 series.") [1]
to support flashing Nuvoton's Cortex-M4 chips: M541 & NUC442/472 series.
The code comes from the commit basically. Jian-Hong Pan tweaked for the
compatibility with current OpenOCD. So, leave the author as Zale Yu.
[1]: https://github.com/OpenNuvoton/OpenOCD-Nuvoton/commit/c2d5b8bfc705
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I9dc69eccb851df14c1b0ce2f619d7b3da0aa92aa
Reviewed-on: https://review.openocd.org/c/openocd/+/7329
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch is picked from the flash part of OpenOCD-Nuvoton's commit
("flash: supported Nuvoton M4 series. jtag: Used HW reset instead of
auto reset. tcl: added a configuration file for Nuvoton M4 series.") [1]
It reorders Nuvoton MCU part list and spreads out the way to define the
banks' base address & size of the parts.
The code comes from the commit basically. Jian-Hong Pan tweaked for the
compatibility with current OpenOCD. So, leave the author as Zale Yu.
[1]: https://github.com/OpenNuvoton/OpenOCD-Nuvoton/commit/c2d5b8bfc705
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I1f21f54dfdf53e5b8ea04d803347d1dbc8c321a0
Reviewed-on: https://review.openocd.org/c/openocd/+/7339
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Do not read ID from SPI flash and suppress autodetection
if non-zero flash bank size is configured.
Change-Id: Idcf9ee6ca17f9fa89964a60da7bf11e47b4af5e7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7241
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The HiFive Inventor uses this flash chip, so adding it will allow for
openocd to be used to program it. These values were taken from the
chip's documentation.
Signed-off-by: Fawaz Tirmizi <fawaz@rivosinc.com>
Change-Id: I15c9d35f99d4500f73134cdc2d1b9ab6279b491c
Reviewed-on: https://review.openocd.org/c/openocd/+/7135
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Flashing a SAMD21J17D was failing during NVM erase. The samd21
datasheet specifies that one cause of error conditions is executing an
NVM command while the previous command is still running. The solution
is to wait for INTFLAG.READY after a command is issued.
SAMD21J17A was not exhibiting this problem. Perhaps the later silicon
revision has slower NVM erase times.
Signed-off-by: Dan Stahlke <dan@stahlke.org>
Change-Id: I19745dae4d3fc6e3a7611dcac628e067cb41e0f0
Reviewed-on: https://review.openocd.org/c/openocd/+/7391
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The variable retval is assigned a value that is never used.
Scan-build reports:
Although the value stored to 'retval' is used in the
enclosing expression, the value is never actually read
from 'retval'.
Drop the dead assignment.
Change-Id: I11588dee748a55d52aa7f35bc1967b7df55af7fc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7379
Tested-by: jenkins
target_run_flash_async_algorithm expects the source_buffer to have
at least 2 words reserved for read and write pointers in addition to the
FIFO buffer. If the size of the data to be flashed is <= 8 bytes then
the flash function will fail with "corrupted fifo read pointer" error.
Ensure the allocated buffer is big enough to hold both FIFO buffer and
read/write pointers.
Change-Id: I09c22eaac517b8cfea8e0b463f5deb6b98afd267
Signed-off-by: Simon Smiganovski <simon.smiganovski@fruitcore.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7342
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The variable retval is assigned a value that is never used, as it
is reassigned few lines below.
Drop the dead assignment.
Change-Id: Id4e9134408fab3e04936d36e95724bf8d3ab55aa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7304
Tested-by: jenkins
ST-Link v2 dongles can be used with many cortex-m parts, but they have
one limitation -- they can only perform 8-bit and 32-bit writes to the
target. 16-bit writes are done using a pair of 8-bit writes. While not
usually an issue, in the case of the at91samd flash driver, the 16-bit
'command' register must have both halves written in the same
operation.
Fortunately, this register has two pad bytes above it in the address
space, making it safe to always access with 32-bit operations.
Change-Id: I44b0db9406982a8db5818c0533d3101618741db2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7234
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The num_reg_params parameter of target_run_algorithm() was not
updated when setting "sp" was introduced. Therefore "sp" as the last
register parameter was not passed to a target algo.
Introduce a new helper variable with correct count of register parameters
and use it everywhere needed.
Change-Id: I934a71380783d98917167f1569145808ef23540f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7225
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: Idf3bce842b4507c1f12692b5fbcd6730637de9db
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7216
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Flash read_id/erase/write operation on running target failed
in target_run_algorithm() anyway. It generated lot of error messages.
Check the target state and bail out early if target is running.
Change-Id: I903f5f38c8e61016e5002b235e5f07803bd2ec4e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7215
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
SPI flash erase often takes longer than the fixed timeout 3 seconds.
Introduce a configurable timeout_ms parameter to rp2040_call_rom_func().
Compute the erase timeout from the number of blocks to be erased.
While on it make the timeouts shorter for connect flash, flush cache and
enter/exit xip (1 second is enough).
Change-Id: I552bfa317ee17064de3a54ec2f0c63e84ba87222
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7214
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
The size of the flash write buffer should be rounded
down to the multiply of flash page size.
Using write chunks of unadjusted size results in write of chunks
unaligned to flash pages.
Change-Id: If7931362ee193dff4dc2df7ec78f13530658cf08
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7187
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While on it restore memory-mapped mode also after flash erase
(originally was restored after flash write only).
Change-Id: I5e153b79ac27a8439f57239ce90ce8a79c0bb8a1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7186
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Prepend stack_grab_and_prep() function name by rp2040_ prefix.
Introduce target helper variable in rp2040_stack_grab_and_prep()
and use it instead of dereferencing bank->target several times.
Move flash ID reading code to the new rp2040_spi_read_flash_id()
function.
Change-Id: I9d6e51e17e36e6230155a586065499f2f260089a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7185
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Marc Schink
iosabi
Antonio Borneo
Daniel Anselmi
Matthijs Kooijman
Tarek BOCHKATI
panciyan
Andrew Lalaev
Andreas Bolsch
Daniel Serpell
Tomas Vanek
Jian-Hong Pan
Zale Yu
Tarek BOCHKATI
Fawaz Tirmizi
Kyle Schwarz
Dan Stahlke
Simon Smiganovski
Keith Packard