swd and dap-direct are not implemented yet
Split from change https://review.openocd.org/6077/
Change-Id: I6d73d8adf6a6090001c5d4771325fb1d63c45e3c
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6459
Tested-by: jenkins
By accessing invalid AP in JTAG mode, it's possible to trigger the
error:
JTAG-DP STICKY ERROR
After that the sticky error is never cleared and the whole DAP
gets not anymore accessible.
Clean-up the sticky error once detected.
Change-Id: I8b07263b30f9e46645f0c29084b8f1626e241f45
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6430
Tested-by: jenkins
Required for parsing ADIv6 ROM tables.
Split from change https://review.openocd.org/6077/
Change-Id: I849543b7b4a4455b10bd9fc7da38a37849d71700
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6458
Tested-by: jenkins
ADIv5 MEM-AP registers are a subset of ADIv6 MEM-AP registers and
are located at different offset.
To prepare for introducing ADIv6, add 'struct adiv5_dap *' as
argument to ADIv5 registers macro.
Check the ADI version and use the proper address.
Both adapter drivers rshim and stlink are ADIv5 only, so let them
use the ADIv5 macros only.
Split from change https://review.openocd.org/6077/
Change-Id: Ib861ddcdab74637b2082cc9f2612dea0007d77b1
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6457
Tested-by: jenkins
Add flags to 'dap create' command and set the field adi_version
in struct adiv5_dap.
Actually only ADIv5 is functional. Other patches are needed to get
ADIv6 working.
Split from change https://review.openocd.org/6077/
Change-Id: I63d3902f99a7f139c15ee4e07c19eae9ed4534b9
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6456
Tested-by: jenkins
While an ADIv5 DAP can only have 256 AP, ADIv6 can provide till
2**40 (1,099,511,627,776) AP per DAP.
The actual trivial code implementation for ADIv5 (that uses an
array of 256 ap in the struct adiv5_dap) cannot be extended as-is
to handle ADIv6.
The simple array of 256 AP can be reused as a dynamic storage for
ADIv6 ap:
- the ADIv5 AP number is replaced by the ADIv6 base address;
- the index of the array (equal to ADIv5 AP number) has no link to
any ADIv6 property;
- the ADIv6 base_address has to be searched in the array of AP.
The 256 elements in the AP array should be enough for any device
available today. In future it can be easily increased, if needed.
To efficiently use the 256 elements in the AP array, the code
should associate one element of the array to an ADIv6 AP (through
the AP base address), then cancel the association when the AP is
not anymore needed. This is important to avoid saturating the AP
array while exploring the device through 'dap apreg' commands.
Add a reference counter in the struct adiv5_ap to track how many
times the struct has been associated with the same base address.
Introduce the function dap_get_ap() to associate and return the
struct, and dap_put_ap() to release the struct. For the moment the
code covers ADIv5 only, so the association is through the index.
Use the two functions above and dap_find_get_ap() throughout the
code.
Check the return value of dap_get_ap(). It is always not NULL in
the current ADIv5-only implementation, but can be NULL for ADIv6
when there are no more available AP in the array.
Instrument dap_queue_ap_read() and dap_queue_ap_write() to log an
error message if the AP has reference counter zero, meaning that
the AP has not been 'get' yet. This helps identifying AP used
without get/put, e.g. code missed by this patch, or merged later.
Instrument dap_cleanup_all() to log an error message if an AP has
reference counter not zero at openocd exit, meaning that the AP
has not been 'put' yet.
Change-Id: I98316eb42b9f3d9c9bbbb6c73b1091b53f629092
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6455
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Tested-by: jenkins
There is an accsess to wrong index, when arm semihosting_basedir
command not used or basedir set to empty string.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I3afa049d74b30496f5c03ba4ef67431784f81bdc
Fixes: ce5027ab01 ("semihosting: add semihosting_basedir command")
Reviewed-on: https://review.openocd.org/c/openocd/+/7005
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In function adiv5_jim_configure() check that calloc() returns a
valid allocated memory pointer.
Change-Id: I97287e168834693900341add9d9eb9a5f38c55b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7014
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The array is partially initialized with buf_set_u32(,5,32,), then
the rest of the array is read from SWD.
But scan-build report the array to have garbage content after the
initialization, due to the offset of 5 bit that only inits part of
the first byte.
Silence the false positive from scan-build by initializing the
array.
Change-Id: Ic38d50280f67939e3ec5fa05741f66d5f993f8c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7013
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
While scan-build complains that dap_p or ap_num_p could be NULL,
the current code never passes NULL pointers.
Add an assert() to silent scan-build and prevent any further use
of the function with incorrect parameters.
Change-Id: I656810dddcea61e85d85b13efb114f7607ef837c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7012
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit d01b3d69ec ("arm_adi_v5: separate ROM table parsing from
command output [3/3]") introduces a new scan-build warning because
removing one return in case of error causes using uninitialized
values.
Add back the return on error.
Change-Id: I10ddc548b756d34aaccc0511f091b4caa5ec271a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: d01b3d69ec ("arm_adi_v5: separate ROM table parsing from command output [3/3]")
Reviewed-on: https://review.openocd.org/c/openocd/+/7011
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit 21f7885d1c ("arm_adi_v5: separate ROM table parsing from
command output [1/3]") introduces a new scan-build warning because
continues the execution even when dap_get_debugbase() returns
error. The value of 'apid' can be uninitialized:
5th function call argument is an uninitialized value
Check the return value and quit on error.
While there, remove the useless initialization of 'dbgbase' that
was apparently required for the same problem.
Change-Id: Iade26a152925ee0f1bf114ed829b94f7ed5b254f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 21f7885d1c ("arm_adi_v5: separate ROM table parsing from command output [1/3]")
Reviewed-on: https://review.openocd.org/c/openocd/+/7010
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
target_to_armv7m() just returns a type-cast of target->arch_info,
so the test has no value.
Following target_run_algorithm() checks magic number so
we need not worry about execution on mismatched architecture.
Change-Id: Ic9892a488a42af1d8e8731eddb39240deeb26020
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6755
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Error: Uninitialised value was created by a heap allocation
at telnet_new_connection (telnet_server.c:227)
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I698a3648be698c93a2395a718ee1ade028226995
Reviewed-on: https://review.openocd.org/c/openocd/+/7006
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
fix "Declared variable-length array (VLA) has zero size" warnings
while at there instrument the probe function to ensure the flash bank
contains at least 1 sector
Change-Id: I3ba0e6345881557ad1aab2d1b41eee438b49fe04
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6470
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ESP32-S2 is a single core Xtensa chip.
Not full featured yet. Some of the missing functionality:
-Semihosting
-Flash breakpoints
-Flash loader
-Apptrace
-FreeRTOS
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I2fb32978e801af5aa21616c581691406ad7cd6bb
Reviewed-on: https://review.openocd.org/c/openocd/+/6940
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
when using semi-hosting with cortex_a this LOG_INFO pollutes openocd
console, so just reduce the log level of this message.
Change-Id: I91aa70492f4e361b25a0e5517d0cf73f2f8ed599
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://gerrit.st.com/c/stm32ide/official/openocd/+/248225
Tested-by: Tarek BOCHKATI <tarek.bouchkati@st.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6993
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The command 'flash erase_check' showed the message
'Running slow fallback erase check - add working memory'
even in the case the target didn't implement blank_check_memory.
Change return code of target_blank_check_memory() in this case
and sense it in default_flash_blank_check() and show a message
without a request for working memory.
Change-Id: I7cf9bf77742964b4f377c9ce48ca689e57d0882f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6765
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
This helps e.g. if there are 8 cores, and cores 0--3 are in one SMP
group while 4--7 are in another group. (And there are 2 gdb instances
connected, one debugging the first group, and one the second.)
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I7b6c9382eadf964529105eaf0411a42d48768668
Reviewed-on: https://review.openocd.org/c/openocd/+/6979
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is adapted from [1].
[1] https://review.openocd.org/c/openocd/+/4999
Signed-off-by: Michael Walle <michael.walle@kontron.com>
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
[ adapted to use common configuration ]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I9a428371694e7864e03055b8de18a55a7843b8c2
Reviewed-on: https://review.openocd.org/c/openocd/+/6977
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The LS1028A is similar to the LS1088A, except that it has 2 CPUs (and
different ethernet capabilities). From a JTAG perspective, all that's
different is the number of CPUs and the TAPID.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: Iba3a0ecfbf82cfcfeb7eea42d52121c3b9dc93a2
Reviewed-on: https://review.openocd.org/c/openocd/+/6976
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Several Layerscape processors (LS1088A, LS2088A, LS2160A, and LS1028A)
share a common architecture. Break out the common setup from the LS1088
config in preparation for adding the LS1028A. There's no official name
for this series of processors, but NXP refers to them as "chassis
generation 3" in U-Boot, so we'll go with that too.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: Ic6f89f95c678101f54579bcaa5d79c5b67ddf50a
Reviewed-on: https://review.openocd.org/c/openocd/+/6975
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This command allows users to set base working directory for the
semihosting I/O operations.Default is the current OpenOCD directory.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I80c5979e4c96d66cccdd12cc6fcd5f353e5c6b4d
Reviewed-on: https://review.openocd.org/c/openocd/+/6888
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added support for the new Renesas RISC-V
device: RZ/Five
Signed-off-by: micbis <michele.bisogno.ct@renesas.com>
Change-Id: Id8ba29b83528c0bfe4f9b4ed21b0151a6e853bd7
Reviewed-on: https://review.openocd.org/c/openocd/+/6974
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Added support for two new devices: RZ/G2LC and RZ/G2UL
Change-Id: Iec6ba88c1d279f50808b060343b45c796bbfdbfc
Signed-off-by: micbis <michele.bisogno.ct@renesas.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6972
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes "variable set but not used" errors.
Tested with Homebrew clang version 13.0.1
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ia90baf5b4857db2b5569ebe6adbbb832de772aad
Reviewed-on: https://review.openocd.org/c/openocd/+/6971
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Removes Warning: line 6482, column 12
1st function call argument is an uninitialized value
Use target ptr directly as checked in previous lines instead of
dereferencing head->target
Change-Id: I6804b776fd493af71f3098d702f9cdc7acb50151
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6970
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
First time contributors surprisingly often write "topic:"
instead of "the main part or subsystem the patch touches" as requested
in patchguide.html
To prevent them doing so:
Use longer self-explaing "specify touched area" instead of "topic"
Give some examples in addition to recommended looking at "git log"
Change-Id: I1c307b460d7a79ba3c9918af8dbc9e9f827e1fb9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6683
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tigard[1] is an FT2232H-based development tool designed for ease of use
with many different protocols and targets. It includes a JTAG header
wired to channel B, with labeled pins for the four required signals as
well as nTRST and nSRST, which are connected through an output buffer to
BDBUS4 and BDBUS5 respectively.
Add an interface config for Tigard. I wrote it by referencing the Tigard
schematic and tested it by debugging a couple of RISC-V development
boards.
[1] https://github.com/tigard-tools/tigard
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Change-Id: I34df9f72538ba1e40ad53b568c9cdca96ae4b082
Reviewed-on: https://review.openocd.org/c/openocd/+/6952
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While cross-compiling OpenOCD the generated script is not named
"libtool" anymore, but e.g. "arm-linux-gnueabi-libtool".
Ignore all the possible variants "*-libtool".
Change-Id: I7a0dade992dbc13f977610bd4a78f8a4783b0146
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6960
Tested-by: jenkins
Incorrect validation prevented GPIO0 from controlling the direction of
the SWDIO buffer or operating TRST/SRST.
Have all GPIO number validation checks performed by is_gpio_valid().
Change-Id: Ib8fb704ab588a618ac41c111f6168d658891d92c
Signed-off-by: Steve Marple <stevemarple@googlemail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
It is a common requirement to automatically execute some command
after "init".
This can be achieved, either in scripts or through OpenOCD command
line, by explicitly calling "init" followed by the commands.
But this approach fails if the request for post-init commands is
spread across configuration files; only one of the files can split
pre-init and post-init status by calling "init".
The common workaround is to "rename" the command "init" and
replace it with a TCL proc that calls the original "init" and the
post-init commands. E.g. in Zephyr script [1].
To simplify and formalize the post-init execution, use a TCL list
that contains the list of commands to be executed. Every script
can contribute adding new commands, e.g. using "lappend".
In the same way, formalize the pre-shutdown execution with a TCL
list of user commands to be executed before OpenOCD exit.
Document them and add trivial examples.
Drop from documentation the suggestion to rename "shutdown".
Change-Id: I9464fb40ccede3e7760d425873adca363b49a64f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Link: [1] https://github.com/zephyrproject-rtos/zephyr/blob/zephyr-v2.7.1/boards/arm/nucleo_h743zi/support/openocd.cfg#L15
Reviewed-on: https://review.openocd.org/c/openocd/+/6851
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The function target_type::deassert_reset() is called for every
target after reset is deasserted. If the target fails to get
halted, we log a warning and issue a halt request for the target
itself.
Current code calls the generic target_halt() that:
- extends the halt to all the targets in the SMP node;
- waits for targets to halt.
This breaks the logic of running target_type::deassert_reset()
per target. Plus, waiting for targets to halt delays the call of
target_type::deassert_reset() for the next targets.
Replace the call to target_halt() with the aarch64 specific
function to halt the single target. Pass the parameter HALT_LAZY
to prevent the wait for target halted.
Similar solution is already implemented for cortex_a.
Change-Id: I446dc03cb91524c6d388db485bc2388177af77b6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6947
Tested-by: jenkins
Arm documentation does not explicitly report the order of the two
32bit words that compose the 64bit value. But both ADIv5 and ADIv6
specify that only little-endian is supported (ADIv5.2 obsoletes
the big-endian support). This change reads the 64bit value in
little-endian.
Detect the 64bit content and use it.
Change-Id: I723ec099c7e8c70c1f9a568e32ea867fcbf1f1db
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6465
Tested-by: jenkins
With the generic function for ROM table walk-through, reimplement
dap_lookup_cs_component().
Catch the code CORESIGHT_COMPONENT_FOUND and halt the search.
While there, drop two macros in arm_coresight.h, now unused.
Change-Id: I589ef7ae8a651d0c422ce7d0b4ed913713a8217e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6824
Tested-by: jenkins
Simplify the code in cortex_a and aarch64 by moving the call to
dap_get_debugbase() inside dap_lookup_cs_component().
This has the further effects:
- dap_get_debugbase() is not referenced outside arm_adi_v5.c and
becomes static;
- dap_lookup_cs_component() looses one parameter;
- the coreid parameter 'idx' is passed as value;
- the caller in aarch64 don't have and don't print the irrelevant
value of AP register APID;
- fixes the debug message in the caller in aarch64 to print the
coreid value instead of always zero.
Change-Id: Ic7f0f643fdf067c059c8f2455a02ff18a3fed054
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6823
Tested-by: jenkins
Now all the actions (build command output) of command "dap info"
are decoupled from the ROM walk-through.
Pass the actions as a generic parameter to ROM walk-through code.
Put as private data every information that is only required by the
actions and not by the ROM walk-through.
Change-Id: I3b6ad112ea21296458c94aebbf91bf65bf6657a7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6822
Tested-by: jenkins
This change only targets the output of rtp_rom_loop().
Change-Id: If9ac013798923428c3b897a969887e98b6935a2b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6821
Tested-by: jenkins
This change only targets the output of rtp_cs_component().
To easily propagate the coordinates of the CoreSight component,
add them in the struct that holds the register values.
While there, define a macro for the max depth of ROM tables.
Change-Id: I75e5ef4f9419da3192123aebcd61471c2af9374f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6820
Tested-by: jenkins
In OpenOCD arm_adi_v5 we have already two implementations of code
for parsing the ADIv5 ROM table:
- in the commands "dap info" and "$dap_name info";
- in the function dap_lookup_cs_component().
Adding support for ADIv6 requires extending both implementations.
Moreover, current code does not handle few aspects of the ROM
parsing, e.g. the "Power Domain IDs".
To add such extensions both implementations should be touched.
I plan to add a command to parses (again) the ROM table and dump a
simple prototype of a configuration script for the target, useful
while analysing a new target.
Keeping aligned all these implementation would be too complex.
With focus to "dap info" command, decouple the part of code to
walk-through the ROM table from the code that creates the command
output.
The idea is to keep a single implementation for the walk-through
code, while parametrizing the output code to handle the generation
of a configuration script or the result of the function
dap_lookup_cs_component().
This change only targets the output of MEM-AP header
Further changes will target other parts of the code.
While there, add a message if MEM-AP is not accessible.
Change-Id: I112f637edfdb8688afb4e631297f6536da9604f1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6819
Tested-by: jenkins
Kevin Burke
Antonio Borneo
Erhan Kurubas
Tarek BOCHKATI
Tomas Vanek
Tim Newsome
Sean Anderson
micbis
Thomas Hebb
Steve Marple