Commit Graph

9 Commits

Author SHA1 Message Date
Paul Fertser e2b1f06f93 tcl/board: fix all the remaining boards that were sourcing ft2232 configs
This was reported in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372 .

Change-Id: I258f3d40593ff2966ce3ca61c13a23699d1b162f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2230
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-02 09:04:19 +00:00
Spencer Oliver 8cbcd56c0e cfg: update ti/stellaris url's
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/879
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:48 +00:00
Spencer Oliver 7b2687b45b luminary: remove unused config cmds.
Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.

Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-03 09:02:08 +00:00
Spencer Oliver 31b47688ca cfg: update Luminary config files
- Update all Luminary config's to use a common target/stellaris.cfg.
 - Add Luminary ek-lm3s6965 config.
 - Increase working area for boards with more ram.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31 20:09:24 +01:00
David Brownell 70794664f1 Update comments for some Stellaris EK boards.
These  don't need to use the on-board debuggers in JTAG mode.
Off-board is OK, as would be SWD mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16 00:36:52 -04:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
David Brownell c86a64dff7 lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:53 -08:00
oharboe a5d02116a6 David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so
defining ntrst_delay is pointless; don't.

At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-28 06:53:35 +00:00
oharboe e4cff09137 David Brownell <david-b@pacbell.net> split EK board support out
from the target CPU support .

git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 07:21:12 +00:00