are up and running. The examination and validation is actually
"optional" from the point of view of GDB + telnet servers.
Multiple targets should work fine with this.
- jtag_speed is dropped(divisor is increased), if jtag examination and
validation fails.
- the chain is validated 10x to catch the worst jtag_speed offences
- added LOG_SILENT that can be used to shut up log. Feeble
ersatz for try+catch.
- GDB register packets are now always replied in order to make sure
that GDB connect works. If the target is not halted, then these
packets contain dummy values.
git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added new commands arm11 mrc and arm11 mcr to generate these instructions during debug
Thanks Michael Bruck
git-svn-id: svn://svn.berlios.de/openocd/trunk@477 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- switch to synchronous halt during connect. This fixes the bug
where poll() was not invoked between halt() and servicing the
'g' register packet
- halt() no longer returns error code when target is already halted, just
logs a warning. Only the halt() implementation can say anything
meaningful about why a halt() failed, so error messages are pushed
up to halt()
- fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest
of the implementations are still busted.
- by using USER() instead of command_print() the log gets the
source + line #. Nice.
- no longer invoke exit() if soft_reset_halt fails. A reset can often
fix the problem.
git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- force simulate_reset_on_next_halt when target state is initially detected
- print out method of debug entry
- fix VCR activation (didn't work before)
git-svn-id: svn://svn.berlios.de/openocd/trunk@452 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Added simulate_reset_on_next_halt that can be extended to do all sorts
of cleanups for systems without proper reset. Right now it just writes 0
to the control register to disable caches.
- Step skips over Wait for Interrupt instruction
- fix for count
- fix for printf format errors
git-svn-id: svn://svn.berlios.de/openocd/trunk@439 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Small cosmetic fixes in the license header to make them all look the
same, fix some typos, update README.
git-svn-id: svn://svn.berlios.de/openocd/trunk@396 b42882b7-edfa-0310-969c-e2dbd0fdcd60
arm11
--- Added burst memory transfer mode
This does not explicitly query command execution but rather uses a small
delay produced by the FT2232 on certain TAP commands.
A potential failure of this process is detected afterwards and the
program terminates with an error.
'arm11 memwrite burst disable'
can be used to switch this feature off.
'arm11 memwrite error_fatal disable'
can be used to prevent the program to exit on an memory write error
--- Added support for interrupt breaking via VCR register
Use 'arm11 vcr' command to set.
--- Cleaned up the handling of
halt/resume/step/poll, target->state, target->debug_reason,
target_call_event_callbacks() at least as far as I could guess the
intended behaviour from other targets.
Did some overall positive tests with GDB.
--- Added support for breakpoints
Hardware breakpoints only. All breakpoints will be treated as hardware
breakpoints.
All ARM11's seem to have at least 6 hardware breakpoints.
--- Stepping over BKPT added
Modification to PC without touching the target.
--- Stepping over a B or BL to self will do nothing
git-svn-id: svn://svn.berlios.de/openocd/trunk@385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- bugfix in server.c
- removed unused parameter from jtag_add_ir_scan et al. This
wasn't necessary in hindsight but anyway.
- arm11 source committed but not not in Makefile.am/target.c for now.
git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
ntfreak
oharboe
drath