Commit Graph

6077 Commits

Author SHA1 Message Date
Spencer Oliver cad5991135 jimtcl: update jim to fix make clean bug
jimtcl 0.73 has a issue when make clean is called.
we have only included that fix as this is close to a release to update
to jimtcl master.

Change-Id: I5791ff32a98bd76e52feb9475605cbecf58420e5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/638
Tested-by: jenkins
2012-05-14 09:35:31 +00:00
Spencer Oliver c102e448c3 stlink: fix stlink api2 single step
This makes the newer v2 api behave as per the v1 api, eg. single stepping
masks all interrupts.

A better long term solution is to use same behaviour as a cortex-m3
target, see CORTEX_M3_ISRMASK_AUTO.

Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/621
Tested-by: jenkins
2012-05-14 09:34:15 +00:00
Spencer Oliver 61672009c4 stlink: add stlink_api cmd
This enables the manual selection of the stlink api version.

Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/617
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14 09:34:00 +00:00
Spencer Oliver 18df479f0a stlink: stlink/v1 use v2 api if supported
The api v2 is supported on the stlink/v1 if it has a least v11 firmware.

Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/616
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14 09:33:49 +00:00
Spencer Oliver 57260831dd mips: support connecting under reset
Some targets support connecting while the target's srst is asserted.
Tested on pic32 family.

Change-Id: I0d20c40af6d031d1306043893e95e61f484c0a87
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/608
Tested-by: jenkins
2012-05-14 09:32:57 +00:00
Freddie Chopin caeb057205 Use hardware reset and connect under reset on boards with ST-LINK/V2, as
now it is supported.

Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14 09:32:20 +00:00
Spencer Oliver a09bb27e23 cfg: add stm320518-eval onboard stlink config
Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/610
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14 09:32:03 +00:00
Spencer Oliver d469c686d9 stlink: support connecting under reset
Some targets support connecting while the target's srst is asserted.
Tested on stm32 family.

Change-Id: I1197dd721a1e1cbf95ee77dfd8e1082b165b22a9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/607
Tested-by: jenkins
2012-05-14 09:31:45 +00:00
Spencer Oliver 6637cf9229 cortex-m3: support connecting under reset
Some targets support connecting while the target's srst is asserted.
Tested on stm32 family.

Change-Id: I9df43623025e37832155aeee7aa099b844b85f16
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/606
Tested-by: jenkins
2012-05-14 09:31:17 +00:00
Aurelien Jacobs 9d31589d19 cfi: fix write_bank segfault with spansion flash on armv7m
cfi_spansion_write_block() passes an arm_algorithm struct to
target_run_algorithm() which in turn calls armv7m_start_algorithm()
which expect an armv7m_algorithm struct.
As armv7m_algorithm is bigger than arm_algorithm, when
armv7m_start_algorithm() writes in the struct, it overrun the buffer,
writting junk on the stack, which latter on generates a segfault.

This patch ensure we use a properly sized armv7m_algorithm struct
when the target is an armv7m.

Change-Id: I4ab67c15ae4bb72454414a81b92a4231dcdb2239
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/623
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14 09:30:18 +00:00
Spencer Oliver e95f8d93f2 cfi: fix cfi arch check regression
seems 9933fa334d introduce a regression
if the target was anything other than armv4_5 or armv7m.

Just check that we have an arm target.

Change-Id: I67c05138e5be2952ee92e9bfa15e1d050844462a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/615
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14 09:29:43 +00:00
Spencer Oliver ca53849045 cfi: check supported arch
check that the cfi driver supports the current target arch.

Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/614
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14 09:29:16 +00:00
Spencer Oliver d2d4f776d8 build: use generic name for arm_algorithm vars
This makes the code a bit easier to read as arm_algorithm can
refer to other arch's, not just armv4_5.

Change-Id: I78c99d40f34cda04e06f2daee75b48ff40a1d23d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/613
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-14 09:29:02 +00:00
Spencer Oliver e1e1d4742c build: add missing erase_check loader src
Change-Id: I1534c1ea1606fda9eb6ffa6a11a708f8c8a3d46a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/605
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-14 09:28:03 +00:00
Spencer Oliver 1b0c22dd56 armv7m: update crc/erase_check loaders for cortex-m0
Use loaders that have been built for cortex-m0, making them usable for both
cortex-m0 and cortex-m3 families.

Change-Id: Ifd82be87eaec2cb96464290c80800cec3630d619
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/604
Tested-by: jenkins
2012-05-14 09:27:20 +00:00
Spencer Oliver 4257cb728c contrib: fix Neo1973 udev permission typo
Change-Id: I6d5ad0cc28e0cb52104ead9e974b8b1ed92d9cdc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/636
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-11 13:31:16 +00:00
Spencer Oliver 47cf0aabc8 flash: use correct stm32f0 flash size register
The stm32f0 parts use a different address then the rest of the family.
Add a function that returns the correct FLASH_SIZE reg depending on variant.

Change-Id: Idb41580f7162f395b347cec034d6b745847326b7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/601
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:06:43 +00:00
Spencer Oliver 7fca524606 cfg: increase stm32f0discovery board working area
Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/602
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:05:45 +00:00
Spencer Oliver 85c0375337 cfg: increase stm32f0 default working area
The smallest stm32f0 has 4k sram, so use this as the default.

Change-Id: I9097be9608da92b1b9da504e5bacc1280c86907a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/603
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:05:11 +00:00
Bill Traynor dcb222e072 cfg: Deleted duplicate busblaster.cfg and renamed original.
The busblaster.cfg was contributed on April 23, 2012 and is a
duplicate of dp_busblaster.cfg that was contributed on Oct. 23,
2011.  Therefore, deleting the second version.  Also, renaming
the original dp_busblaster.cfg to simply busblaster.cfg, as this
name is more concise.

Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/622
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-08 14:03:42 +00:00
Bill Traynor f7a37efc3f cfg: Fixed product link to Flyswatter2
Fixed the product link to the Flyswatter2 debugger:
http://www.tincantools.com/product.php?productid=16153

Change-Id: I7d65e8c94d4521e61b9ae72a5ce14b140b775697
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/620
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-05-07 20:14:09 +00:00
Bill Traynor 388d041e0f cfg: add default pid/vid pair to beaglebone board cfg.
The newer versions of BeagleBone boards use the default vid/pid
pair for FT2232 debugging.  Please see the following README:
http://beagleboard.org/static/beaglebone/latest/README.htm
On revision A3/A4 boards, the VID/PID were chosen to match the
 TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've
 given the authors of CCS the chance to update their software, the
generic FTDI VID/PID (0x0403/0x6010) will be used to simplify
installation of drivers for systems already having those drivers.

Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/619
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-07 19:58:15 +00:00
Spencer Oliver 908ee4dc96 build: remove clang unused variable assignment warnings
Change-Id: Ibe5254704d6cd879a318a82c4f50d9da3c14276c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/600
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-04 08:15:40 +00:00
Spencer Oliver 85735925c7 build: remove clang unused variable increments warnings
Change-Id: Ib755474aa46f7233495fae1947bc27cd0b2d6b4f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/599
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-04 08:15:30 +00:00
Spencer Oliver ee38fff78b cfg: fix incorrect stm32vldiscovery working area
The working area used in the config was incorrect, we only have 8K on this
board not 16K as the original cfg was declaring.

Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/598
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:34 +00:00
Spencer Oliver 8002ed268d cfg: allow stm32discovery parameter override
This enable the user or board config to override the parameters
passed to stm32_stlink.cfg.

Required to fix a incorrect working area bug with the stm32vldiscovery.

Change-Id: I40a4f7913ff37d577d44b1f23befccf0317080a1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/597
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:29 +00:00
Spencer Oliver ff6c3dd13c cfg: remove unused stlink options
reset_config is now supported by stlink, remove from the config as this
is a per board option.

Change-Id: I85208d2154502b8d3a098afe1d9a28d75820a7c0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/582
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:05:23 +00:00
Spencer Oliver cc4a934d37 stlink: support srst reset
This adds the ability to support srst reset for the stlink/v2.
stlink/v1 will fallback to using SYSRESETREQ which is a full reset - including peripherals.

To enable the use of the srst add the following to your cfg:
reset_config srst_only

Change-Id: I570de607c5f370fd6a4abf47360686c9be07bcdd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/581
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:05:09 +00:00
Spencer Oliver 2d8c7c510b stlink: export write_debug_reg
Change-Id: I3944911d4a71dba4af48470ceb3e4850784a0e7d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/580
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:04:54 +00:00
Spencer Oliver 5d1cabb142 stlink: add hardware srst functions to stlink/v2
Change-Id: Ib82b6a1116b9f396f1933cc5526733334254fd62
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/579
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-04-30 13:04:38 +00:00
Spencer Oliver 9cc733ae31 flash: update stm32f0x version info
Change-Id: Iab0962021e6243d1df3e7c647654a51b4bf50d72
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/578
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:04:22 +00:00
Spencer Oliver 0ce2e9a259 stlink: default to latest api available
Change-Id: Ic04128f4020055587bb87250f41e5c804d9c2b01
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/577
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:04:07 +00:00
Spencer Oliver 6f3a9bdf67 stlink: add improved STLINK_JTAG_API_V2 support
The STLINK/V2 supports two api's.
This completes the support so STLINK_JTAG_API_V2 is usable.

Support for hardware srst still needs adding.

Change-Id: Ic4d0499be2a225d18abf96fd6f5ce5e295fb1f37
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/561
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:03:47 +00:00
Spencer Oliver 8117ad8ce9 stlink: support stlink api result
The stlink api does support results for some functions - add support.

Change-Id: I39cb495408c46af8bc343b198a1e0bd4c7aee6d8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/560
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:02:49 +00:00
Olivier Schonken fdbf70601d SAM3X - Added support for at91sam3x8h-ES, fixed CIDR for ES2 and production
The first available devkits for the at91sam3x8h had the ES device populated.
The ES device had an error in the CIDR, specifically in the last byte of
which the upper 3 bits identifies the chip family - cortex-m3, arm7tdmi etc.

The problem was fixed on the ES2 devices - Thanks to Pat Hickey for giving me
the heads-up.

Change-Id: I13dd7fbe0cffaf76f948188c9459dc3cf4435570
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/575
Tested-by: jenkins
Reviewed-by: Jim Norris <u17263@att.net>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-26 10:58:42 +00:00
Olivier Schonken d1cd97777b topic: Added support for the SAM4S variants
Atmel introduced 6 new Cortex-M4 processors on 2011-10-26
SAM4S16C - 1024KB flash LQFP100/BGA100
SAM4S16B - 1024KB flash LQFP64/QFN64
SAM4S16A - 1024KB flash LQFP48/QFN48
SAM4S8C - 512KB flash LQFP100/BGA100
SAM4S8B - 512KB flash LQFP64/QFN64
SAM4S8A - 512KB flash LQFP48/QFN48

The SAM4S processors still suffer from the "6 waitstates needed
to program device" errata.

Other relevant changes are:
1. Address of flash memory starts at 0x400000.
2. EWP (Erase page and write page) only works for the first two 8KB "sectors"
3. Because of the EWP not working for all the sectors, normal page writes have
to be used.  The default_flash_blank_check is used to check if lockregions
should be erased.
4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was
500 ms)
5. There are 128 lockable regions of 8KB each.

Implemented default blank checking, and page erase for load_image scenarios.
This is to compensate for the EWP flash commands only working on the
first 2 8KB sectors.

Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/528
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-26 10:58:14 +00:00
Linus Tolke f28a5d9217 topic: Fixed a clang Dead assignment warning.
The value returned from target_write_buffer is still ignored.

Change-Id: Icb49d4d1313a5e4f7df68d3f122a5f81cfa0604a
Signed-off-by: Linus Tolke <linus@tigris.org>
Reviewed-on: http://openocd.zylin.com/596
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-24 20:31:19 +00:00
Linus Tolke 63e5386fa6 topic: Ignored TAGS files.
Allow use of TAGS.

Change-Id: I5e71e8986671642b49cc9a62d37cc8c0dfa37181
Signed-off-by: Linus Tolke <linus@tigris.org>
Reviewed-on: http://openocd.zylin.com/595
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-04-24 19:22:29 +00:00
Allen Martin f908bae6bf cfg: Add interface config for Dangerous Prototypes Bus Blaster
This is a FT2232 based USB JTAG dongle

Change-Id: Ibed773a23b6446df62fe4eac16c27fb2d741f4c3
Signed-off-by: Allen Martin <amartin@nvidia.com>
Reviewed-on: http://openocd.zylin.com/589
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 10:00:12 +00:00
Bill Traynor 6ba7331501 UserGuide: Fixing link to USBprog tool.
In section '2.8 USB Other' updated the link to the USBprog tool:
http://shop.embedded-projects.net/

Change-Id: I7fa453934ac6a7889e01b22b7e0cb07f42ee168d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/591
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 09:13:23 +00:00
Bill Traynor 941fb511cf UserGuide: Updated link to Versaloon-Link tool.
In section '2.8 USB Other' updated the URL to the Versaloon-Link to:
http://www.versaloon.com

Change-Id: Idd92333cb3d87d1b89dfb282134332387df5a0fc
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/592
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 09:11:52 +00:00
Bill Traynor 0a581ccdb1 UserGuide: Fixed link to Wiggler2 project.
In section '2.9 IBM PC Parallel Printer Port based' fixed link to
the Wiggler2 project and removed the alternate URL text to retain
style consistency with the other URLs in the document:
http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag

Change-Id: I879db1c6eaf683ca6475a0f466f987087c9d60d0
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/593
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 09:10:59 +00:00
Bill Traynor b9ecc64c80 UserGuide: Fixed link to ST flashlink.
In section '2.9 IBM PC Parallel Printer Port Based' fixed link to
ST's flashlink PDF and removed alternate URL text:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/
DATA_BRIEF/DM00039500.pdf

Change-Id: I99702dd00d4145784baee1f63b5998bf79e06678
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/594
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 09:09:16 +00:00
Bill Traynor fa39842d28 UserGuide: Fixing two typos.
In Section 2.7 USB ST-LINK based made these two changes:
"they only works with" to "they only work with"
"following method's" to "following methods"

Change-Id: Idfe6c11c3fa6f2157d01697cd7f480a9d495c8e2
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/590
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 09:05:04 +00:00
Spencer Oliver 26f1354eda docs: update gerrit publish refs
since gerrit 2.3 pushing changes to refs/for/ is deprecated in
favour of using refs/publish/.

Change-Id: I6244b9645da2144921583bd9778a95c563fac89f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/567
Tested-by: jenkins
2012-04-20 15:34:00 +00:00
Uwe Hermann 28e43783e5 Split olimex_stm32_h107.cfg.
Use one board file per eval board, so that the filename matches the
exact board the user has / wants to use. Merging different boards into
one file is confusing.

Change-Id: I7c50233924a87a913723d7215c4851039c2971bc
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/566
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:33:24 +00:00
Bill Traynor c9e59b30ab UserGuide: Fixed link to Raisonance RLINK.
In section 2.6 USB JLINK based, fixed link to RLINK:
http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool
~tool__T018:4cn9ziz4bnx6.html

Change-Id: I15f7a1b68b851054e07eefc07a50b4590ebce677
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/588
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:31:59 +00:00
Bill Traynor e6e8bf46e4 UserGuide: Update Section 2.3 USB FT2232 Based
Updated the link for the usbjtag project to the correct URL:
http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html

Added a NOTE to indicate the axm0432_jtag as no longer being
available from the axman.com page.

Change-Id: I70727303dad58d9dc0c5f9b7cce219288b762042
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/583
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:06:32 +00:00
Bill Traynor 818cc61775 UserGuide: Add ref. to Flyswatter2
Added the Flyswatter2 to section 2.3 USB FT2232 Based hardware
list.

Change-Id: I6a382644b5a0313d30afb5a97d0a9ea00f01efa9
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/584
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:05:02 +00:00
Bill Traynor 008336becc UserGuide: Fixed link to USB-JTAG project.
Updated the URL to Kolja Waschk's USB-Blaster compatible adapter:
http://ixo-jtag.sourceforge.net/

Change-Id: If9d2875b5ba5d3bfaaf524cd253a5fab53e05371
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/585
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:03:54 +00:00