Commit Graph

630 Commits

Author SHA1 Message Date
ntfreak 59b295dbbe Audrius Urmanavičius [didele.deze@gmail.com]:
Add flash programming support for NXP LPC1700 cortex_m3 based family


git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-13 13:54:53 +00:00
oharboe a7a1ae032b Stefano Voulaz <s.voulaz@projecktstudio.com> first cut samsung_s3c2450
git-svn-id: svn://svn.berlios.de/openocd/trunk@2556 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22 14:25:56 +00:00
oharboe e4cff09137 David Brownell <david-b@pacbell.net> split EK board support out
from the target CPU support .

git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 07:21:12 +00:00
oharboe 3ce038baa3 sharpen reset_config for imx27 - use both trst & srst. srst pulls trst.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 06:32:27 +00:00
oharboe b80f6f96d3 srst pulls trst according to Freescale docs for i.mx27
git-svn-id: svn://svn.berlios.de/openocd/trunk@2492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 16:50:28 +00:00
oharboe 42115c0997 David Brownell <david-b@pacbell.net> Update docs to say that "arm7_9 dbgrq enable" is the default
on ARM9 cores, and update the DaVinci config files so they
no longer explicitly specify it.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2484 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 21:16:11 +00:00
oharboe c946358a06 Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can talk to my
Analog Device Eval-ADuC7060 eval board.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 17:47:10 +00:00
zwelch f1f54a0fc5 Remove vim editor commands from TCL files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 11:17:04 +00:00
zwelch 6d08c1800c David Brownell <david-b@pacbell.net>:
Prepare the DaVinci PLL code to support the version 0x0E module
used in newer chips (e.g. dm365):  rename the original code so
it's specific to version 0x02 PLL modules, and update the dm355evm
code to use that new name.

Fix two minor bugs in that version 2 code:  sysclk3 setup used
the sysclk2 divider address (affecting video processing on dm355,
no worry for now) and sysclk2 setup had a syntax error.

Also minor fixups to dm355evm, mostly to permit use of RTCK.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 04:55:35 +00:00
ntfreak 917f92f052 - add stm32 connectivity line tapid to stm32.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-01 10:29:10 +00:00
zwelch ad50a99d6a Add svn:eol-style native property to TCL files that are missing it.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 20:44:21 +00:00
zwelch 2eff86ab23 Remove executable bits from at91sam3 configuration files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 20:39:02 +00:00
oharboe d3c77fdbb2 freddie_chopin@op.pl fix handling of workarea
git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 11:50:04 +00:00
zwelch f130f95d45 Marcel Jost <marcel.jost@bfh.ch>:
This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit.  These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".


git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 09:09:30 +00:00
oharboe f8cc725e0e Kevin Bortis <stm32@bortis.ch> fix worksize
git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 22:08:34 +00:00
zwelch 3d9551241b David Brownell <david-b@pacbell.net>:
Minor bugfix ... previous version was tested *with* ICEpick active.
The "-disable" can swap with "-enable"; but not with an empty string.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 20:04:21 +00:00
zwelch 95da247b40 David Brownell <david-b@pacbell.net>:
Improve the PXA255 target config:  move all that board-specific
setup to the pxa255_sst board.cfg, to which it evidently belongs
(it's the only PXA255 board now included).

Provide the PXA255 JTAG id from Intel docs, and add a comment
about how this chip is now EOL'd (last orders taken).

Note that I still can't get my old PXA255 board to work.  There's
something broken in the reset sequence, which is preventing the
TAP from coming up at all.  Old mailing list posts suggest this
is a longstanding bug...


git-svn-id: svn://svn.berlios.de/openocd/trunk@2416 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 20:04:08 +00:00
duane 0ace4d24db Add support for ATMEL AT91SAM3U - CortexM3 Family
git-svn-id: svn://svn.berlios.de/openocd/trunk@2383 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-24 02:01:14 +00:00
oharboe 974d5f8391 fix eol native
git-svn-id: svn://svn.berlios.de/openocd/trunk@2353 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-22 19:22:10 +00:00
oharboe 26807d1935 David Brownell <david-b@pacbell.net> target config file for newish DM365 chip. Think of this as
an improved DM355, integrating much better HD video support,
Ethernet, and other goodies.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2351 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-22 17:31:12 +00:00
oharboe bc9df17e42 Paulius Zaleckas <paulius.zaleckas@gmail.com> Add config for CS351x CPUs
git-svn-id: svn://svn.berlios.de/openocd/trunk@2349 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-21 21:06:23 +00:00
oharboe 1a400f8b8e Freddie Chopin <freddie_chopin@op.pl> makes lpc2478.cfg file more "standard" and - what is most important - correct (it's working [; ). I've also added some comments which try to clarify the meaning of all that's in there.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2269 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 20:49:55 +00:00
zwelch d727e31af9 David Brownell <david-b@pacbell.net>:
Update the Beagle setup:

 - OMAP3530 updates:
    * split ICEpick TAP enable support to its own file, for
      reuse and eventually for storing other utility code
      like emulation reset
    * clean up, including labeling the tap as for DAP not
      for the Cortex-A8 and making endianness non-variable
    * add a few FIXMEs

 - BeagleBoard cleanup:  there's no SRST, "endstate" is gone, etc

I'm not sure I'd say it's further than "barely limping" just yet.
Key issues remain lack of Cortex-A8 support, and more complete
support for resetting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2267 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 06:44:29 +00:00
zwelch 10e435c961 David Brownell <david-b@pacbell.net>:
DM6446 config updates:

 - List two more TAPs, as disabled, mostly for doc purposes
 - Included basic ICEpick support, still disabled by default
 - Shorten line lengths
 - Use $_TARGETNAME to configure the ETM and ETB
 - This ARM core don't support endianness overriding

For now, boards that can't jumper EMU0/EMU1 will need to tweak
a variable's setting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2265 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 06:40:58 +00:00
zwelch 1ac220df71 David Brownell <david-b@pacbell.net>:
Add another board ... OMAP2420 "H4" board.  This won't be very widely
used with OpenOCD, but with mainline support in both U-Boot and Linux
it at least makes for a more complete set (and another testcase).

This is incomplete support in several respects.  The ARM11 support is
not very deep yet; most registers aren't available, and the ETM can't
be hooked up.  Plus, there's no script for OMAP-specific stuff like
setting up the SDRAM controller.  Eventually the same NAND controller
driver should work with OMAP2 and OMAP3.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-15 23:54:09 +00:00
zwelch ec274b2707 Revert changes from r2134 that snuck into the commit. Mea culpa.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 01:01:13 +00:00
zwelch 594abeb82b David Brownell <david-b@pacbell.net>:
Add configuration for an old AT91rm9200 board, the Cogent CSB 337.
Worth noting from the OpenOCD perspective:

 - It got a real hardware trace port connector; wired up here as
   much as we can, lacking inexpensive trace-aware dongles.

 - This is the first in-tree use of the "arm920t cp15" command.
   It adjusts the CPU clocking and enables i-cache, which gives
   more than 4x speedup after booting Linux; it's visible even
   just running U-Boot.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 00:58:23 +00:00
oharboe f92b104d8d David Brownell <david-b@pacbell.net> target/at91rm9200.cfg cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2075 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-05 08:35:24 +00:00
zwelch 878d0cb043 David Brownell <david-b@pacbell.net>:
Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:

 - Fix syntax error ("-irlen" not "irlen")
 - Provide real TAP ids for the ARM926ejs and the C55x dsp
 - Label both CPUs appropriately (DSP, ARM)
 - List both flash chips

The scan chain looks like this (note truncated DSP instruction code):

      TapName            | Enabled |   IdCode      Expected    IrLen IrCap  IrMask Instr
 ---|--------------------|---------|------------|------------|------|------|------|---------
  0 | omap5912.dsp       |    Y    | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff
  1 | omap5912.arm       |    Y    | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c
  2 | omap5912.unknown   |    Y    | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff

I still don't know what that third TAP is; maybe an early version of
an ICEpick JTAG router.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1974 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 03:05:59 +00:00
zwelch dbbc9c41f7 Move TCL script files -- Step 2 of 2:
- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 06:49:24 +00:00