I don't think there are any real bugs here, but at least this gives us a
clean slate moving forward.
Change-Id: I29c6c398c28dfe580f9a2deb3bdbcfc491a2ceb6
Signed-off-by: Tim Newsome <tim@sifive.com>
The goal of this commit is to provide more robust error handling in
`write_memory_progbuf()`. This is achieved by rewriting it in a fashion
similar to `read_memory_progbuf()`.
The motivation is: some instability in `load_image` was encountered. No
stable reproduction could be obtained, so the root cause was not
determined. Therefore, it was decided to clean-up the code, that may be
implicated in such failures.
Examples of unhanded errors in the code prior to this commit:
* Most of `dmi_write()` return values are discarded.
* If `dm_read()` on `abstractcs` failed (line 4546), `abstractauto` was
not cleared.
Furthermore, the structure of the code was quite complicated, which made
it hard to analyze and reason whether or not all possible failures are
handled properly.
Change-Id: I8a100b686e594855fbf34acf5ccf0e1550f18869
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
OpenOCD style guide(`doc/manual/style.txt`) prohibits use of VLA:
> - use malloc() to create dynamic arrays. Do @b not use @c alloca
> or variable length arrays on the stack. non-MMU hosts(uClinux) and
> pthreads require modest and predictable stack usage.
Change-Id: I12e4a5087fd056d69866137237af6deca27f5d33
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
`LOG_TARGET_DEBUG()` reports file, line and function name at the call
site. This information is not helpfull if it always points to the same
location inside `log_debug_reg()`.
Change-Id: Ib73be0344fb5c80c9ac8e5fdee1084d405522eb7
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The existing code didn't seem to work right at all. I have spike
modifications that exercise these new cases. I'll merge those once this
has merged.
Change-Id: I89bd336f34f1b208a76f25b6b41fe3877800765b
Signed-off-by: Tim Newsome <tim@sifive.com>
Compilers are good at optimizing, and with functions it's abundantly
clear what all the types involved are. This change means we don't have
to be super careful about the type of values because of what the macro
might do to them that might cause overflow.
The only place where the return type matters is in printf-style
functions, and I made get_value32() for those cases where a change was
needed.
This should set the stage for simply copying the latest debug_defines.h
from the debug spec build again.
Change-Id: I5fb19d0cfc1e20137832a7b344b05db215ce00e1
Signed-off-by: Tim Newsome <tim@sifive.com>
The reasoning for the change:
* `__func__` is part of C99, `__PRETTY_FUNCTION__` is GNU extension.
* `__PRETTY_FUNCTION__` is defined to be the same as `__func__` for C
sources by GCC documentation but differ for C++ sources (full
signature instead of just a name).
* Currently Clang does support `__PRETTY_FUNCTION__`, though it uses
GCC's C++ variant across C and C++.
Therefore using `__PRETTY_FUNCTION__` creates confusion and does not
provide any valueble information in the logs.
Change-Id: Ie0db6d73f602784b6752a30911dcef3dd7ee4594
Sometimes, the value from of some DMI scans has no meaning (e.g. when
`op` is read). Such values should not be decoded. To make the dumps more
consistent, `<no decoding available>` is printed when there is no
decoding for a register.
Change-Id: I415f06a5a80f2fc8fb8ab3f79132bdf0602c8ad6
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
By definition in `target/target.h`, `coreid` is not a unique identifier
of a target -- it can be the same for targets on different TAPs.
Change-Id: Ifce78da55fffe28dd8b6b06ecae7d8c4e305c0a2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Added the ability to enter dimensionless registers
Change-Id: I1b781959ce4690ec65304142bd9a7c6f540b3e86
Signed-off-by: Anastasiya Chernikova <anastasiya.chernikova@syntacore.com>
Extend riscv set_ebreak* commands.
Now it can be called without args to print current value.
riscv_ebreak* flags are moved to riscv_info struct.
Change-Id: Ib46e6b6dfc0117599c7f6715c7aaf113e63bd7dc
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
`riscv_debug_reg_to_s()` can be used to decode register value. If the
pointer to buffer is `NULL` it does not print anything, just returns the
length of the string.
The format is:
`<register_value> { <field_name>=<field_value_name or field_value>, ..., }`
e.g:
`0x400382 { version=2, ... ndmresetpending=false, }`
`0x321009 { regno=0x1009, ... cmdtype=0, }`
Change-Id: I63733d8d36385d89ca15de1a43139134bc488c4f
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This also fixes a bug when, after `examine` completion, the target still
has `unknown` status. To reproduce this one spike, it is enough to do
the following:
---
// make sure spike harts are halted
openocd ... -c init -c 'echo "[targets]"'
---
this behavior is quite dangerous and leads to segfaults in some cases
Change-Id: I13915f7038ad6d0251d56d2d519fbad9a2f13c18
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
This patch improves the following issues:
1. Makes it compatible with targets with progbufsize == 1.
2. Although exceptions don’t update any registers, but do end execution
of the progbuf. This will make fence rw, rw impossible to execute.
Change-Id: I2208fd31ec6a7dae6e61c5952f90901568caada6
Signed-off-by: Xiang W <wxjstz@126.com>
The motivation for this refactor is to fixup error handling for some
corner cases. These functions attempt to cache S0 register and only then
perform a bunch of extra checks to figure out if the requested register
is valid one in this context. The problem is that there are few corner
cases when _*progbuf functions could receive a GPR as an input. For
example, an abstract read could fail (for whatever reason) leading to
infinite recursion:
````
save S0 -> read S0 -> save S0 -> read S0 -> ...
```
The case described above could be fixed by adding extra sanitity checks,
however I decided to make these functions more modular since I find
self-contained functions easier to read.
Change-Id: I01f57bf474ca45ebb67a30cd4d8fdef21f307c7d
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
OpenOCD fails in the presence of inactive/unresponsive cores
I faced with case when inactive core returns 0 while reading dtmcontrol.
This leads to failure on assert: "addrbits != 0" in "dbus_scan".
Also change "read_bits","poll_target" funcs to avoid a lot lines in logs
Change-Id: If852126755317789602b7372c5c5732183fff6c5
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Support assign DMI address of the debug module by pass
-dbgbase to the target create command
Change-Id: I774c3746567f6e6d77c43a62dea5e9e67bb25770
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
This patch adds target logging to logging instances where it makes sense.
This is especially useful when debugging multiple targets at once,
such as multicore systems.
Change-Id: Ia9861f3fa0e6e5908b683c2a8280659c3c264395
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Besides checkpatch, now upstream codes are scanning with
Sparse semantic checker tool.
This commit addresses some Sparse and checkpatch warnings.
Change-Id: I0e3e9f15220d8829c5708897af27aa86a8f90c07
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
There were a couple of problems with previous implementation:
* Misalligned read would return ERROR_OK and print all zeroes.
* CMDERR_BUSY for abstract access was improperly handled:
According to the spec, no assumptions can be made about DM_DATA*
contents in such a case, but these were considered valid values from
memory.
* A fallback to one element read was implemented when DMI_STATUS_BUSY
occurred during batch reads, even though this can be accounted for.
Change-Id: I09174c61c951b2bb97a529b7f0aa5afaa995179b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
With this change, failures to resume a hart due to it not being halted
are more explicitly logged or reported as an error.
Change-Id: Ia55d8df85a908363d0f2140637ce1e47c1ab6251
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This involves halting the target, which might have unintended side
effects, but when the debugger is connected software breakpoints must
trap to the debugger. Anything else is a terrible user experience.
Change-Id: I1f7bb610eeeb054cc3042dc6bcfc16589ce12a31
Signed-off-by: Tim Newsome <tim@sifive.com>
Will be used later when we want to do a quick halt/resume.
Change-Id: Ib80166234c4c277b7d9ce26b7566ac0f93017e64
Signed-off-by: Tim Newsome <tim@sifive.com>
* Only set ebreak bits that might be supported based on misa.
* Don't write dcsr if its value wouldn't change.
Change-Id: I7087af0b0df0fbdbf994373b5c887b9b389df872
Signed-off-by: Tim Newsome <tim@sifive.com>
Tim Newsome
Kirill Radkin
Evgeniy Naydanov
Anastasiya Chernikova
liangzhen
Parshintsev Anatoly
Xiang W
Mark Zhuang
Marek Vrbka
Erhan Kurubas