Commit Graph

10084 Commits

Author SHA1 Message Date
Ian Thompson 48db36f436 gdb_server: custom target-specific GDB queries
Provide a customizable hook for handling target-specific GDB queries

Valgrind-clean, no new Clang analyzer warnings

Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I684a259ed29f3651cbce668101cff421e522f79e
Reviewed-on: https://review.openocd.org/c/openocd/+/7082
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-15 13:23:05 +00:00
Ian Thompson d9b2607ca0 gdb_server: support sparse register maps
Add additional error handling for targets where gaps may exist in reg_list[]

Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I65232429e2de08f5d54eeca53aea0db8ce2b58af
Reviewed-on: https://review.openocd.org/c/openocd/+/7103
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-15 13:22:40 +00:00
Antonio Borneo e282d20832 openocd: prevent target polling during 'init'
The command 'init' causes the execution of few lower level
commands, e.g. 'target init', and switches from command mode
COMMAND_CONFIG to COMMAND_EXEC, with an intermediate switch back
to mode COMMAND_CONFIG.

A timed target polling can occur during the execution of 'init'
and the target's status can trigger the execution of some events.
E.g. if a target has been left halted by a previous execution of
OpenOCD, the first poll will find the target halted, calling the
corresponding 'halted' event.
The event handler can use commands that can only be executed in
mode COMMAND_EXEC. If the poll happens while OpenOCD is in mode
COMMAND_CONFIG, the triggered handler will fail.

Prevent the target polling to operate during the execution of the
'init' command.

Change-Id: Ia435a5d2039be9b247e2336616dab53ed5d983ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7007
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2022-08-15 13:22:18 +00:00
Antonio Borneo 0d56f379b5 target: add API to temporarily mask target polling
The same flag 'jtag_poll' is currently used as local data for the
command 'poll' and to temporarily mask the target polling.
This can cause unexpected behavior if the command 'poll' is
executed while polling is temporarily masked.

Add a new flag 'jtag_poll_en' to hold the temporarily mask
condition and keep 'jtag_poll' for the 'poll' command only.

While there, change the initial assignment of 'jtag_poll' using
the proper boolean value.

Change-Id: I18dcf7c65b07aefadf046caaa2fcd2d74fa6fbae
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7009
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2022-08-15 13:22:06 +00:00
Ian Thompson c3138e2d80 gdb_server: add "not supported" Z-packet reply
GDB remote serial protocol specifies breakpoint/watchpoint packet
responses can be an empty string to indicate the specified breakpoint
type is not supported.  Add support for this response alongside existing
"OK", "E NN" replies.

Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: Iaf6280e4c936eb95a92bc80cc74d451ebb328dc3
Reviewed-on: https://review.openocd.org/c/openocd/+/7102
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-15 13:21:37 +00:00
Erhan Kurubas 9903203d73 adapter: run at default speed when clock speed not specified
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I8d2db4a1f618790907265a45d28a212551800b6c
Reviewed-on: https://review.openocd.org/c/openocd/+/7004
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-08-15 13:19:45 +00:00
Asier Llano 6d6207a8d3 rtos: Support for "none" rtos
After a certain RTOS has been configured there is no mechanism
to go back to no RTOS support. It may be useful for debugging
purposes. With the provided modification, the "none" option
of RTOS is provided as a valid option.

It has been tested in two different board (Cortex M4 and Cortex M33).
Documentation has also been updated.

Signed-off-by: Asier Llano <allano@hubbell.com>
Change-Id: I602210bff31ccadd41c41e9454c52b5fffa1671e
Reviewed-on: https://review.openocd.org/c/openocd/+/7092
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-15 13:19:21 +00:00
Tim Newsome 81aa5fd6b4 target/riscv: Update debug_defines.h.
This one doesn't have the license in there, which means now it's
acceptable to GPLv2 again.

See https://github.com/riscv/riscv-openocd/pull/711

Change-Id: I8ba27801172ffa955470d2627fa656cad282ee99
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7087
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-15 13:18:16 +00:00
Tomas Vanek 0e1fe03f4b target/arm: do not expose 'arm reg', 'arm mcr/mrc' commands on Cortex-M
Tcl commands 'arm reg', 'arm mcr/mrc' do not work on M-profile based devices.
Isolate them from 'arm core_state' and 'arm disassemble' and do not chain
them from armv7m_command_handlers.

Change-Id: I2c6befdf82575e95cf05ed158ab5e6faa1a182c3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7101
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2022-08-14 14:43:48 +00:00
Tomas Vanek dee7b7d821 target/arm: make 'arm core_state' command compatible with Cortex-M
Tcl command 'arm core_state' was exposed even on Cortex-M devices.
However it returned message "Unsupported Command" without error status
on such device.

Set the only possible arm->core_state ARM_STATE_THUMB in armv7m init.
Block setting core_state to arm on Cortex-M.

Change-Id: I9525553ac8863a6cf77bbacbcd57e354b6cfe1ca
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7100
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2022-08-14 14:43:04 +00:00
Tomas Vanek b6dad912b8 target/cortex_m: prevent segmentation fault in cortex_m_poll()
If a Cortex-M MCU become unresponsive during a debug session and
re-examination fails to find MEM-AP, debug_ap pointer is set to NULL.

Eventual call of cortex_m_poll() dereferences debug_ap.

Check debug_ap validity at the begin of cortex_m_poll().

Change-Id: I9519f48760c91a48a9e5e8c34634d247098cb14a
Fixes: 35a503b08d (arm_adi_v5: add ap refcount and add get/put around ap use)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7108
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-14 12:11:26 +00:00
Tomas Vanek cae0c8b32b target: move parent target structs just after common_magic
Just a cosmetic refactoring.

Change-Id: I7fbc05324e346fafc98d1b42691d33d3d8fbd04e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7003
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2022-08-14 12:10:14 +00:00
Tomas Vanek ea49b2b2a2 target/aarch64: fix duplicate common magic
AARCH64_COMMON_MAGIC was same as CORTEX_A_COMMON_MAGIC, probably copy pasta.
Define unique AARCH64_COMMON_MAGIC

Change-Id: Ie30e0028453a1fce5624ecad9bf73d5ac3791281
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6997
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-14 12:03:23 +00:00
Tomas Vanek 8f299c6aec target: consolidate existing target/algo common_magic
Unify common_magic type to unsigned int
Move common_magic to be the first member of the struct
Add unsigned specifier to xxx_COMMON_MAGIC #defines

Change-Id: If961d33232698529514ba3720e04418baf6dc6fe
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6996
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-14 12:02:38 +00:00
Tomas Vanek b76a7a82b2 flash/nor: remove useless setting of bus_width and chip_width
The flash/nor subsystem uses bus_width and chip_width for CFI
external flash only. Drop setting these values for internal flash.

Change-Id: I64e79ab38b6e39e845ff96fbf4f60145e3b9690a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7098
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-08 20:52:50 +00:00
Tomas Vanek 2aaa991a50 target: fix unaligned return of target_get_working_area_avail()
The working area allocation routines use 4 byte word alignment.
In the corner case the size of the working area is not aligned,
target_alloc_working_area() of size = target_get_working_area_avail()
will fail because the size gets aligned up and does not fit to the area
which size is aligned down.

Align down the result of target_get_working_area_avail() to cope with that
corner case.

While on it use fancy ALIGN_... macros instead of bitwise and operator.

Change-Id: Ia2a1e861c401c2c78fe6323379a3776fb4f47b06
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7096
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-08 20:51:52 +00:00
Martin Hierholzer d9940cc9bc fix Kinetis 100 MHz rev 1.x programming
Kinetis 100 MHz rev 1.x devices have no SMC and hence need different
checking of the run mode. Details about the differences between rev 1.x
and 2.x of the Kinetis 100 MHz series can be found here:
https://www.nxp.com.cn/docs/en/application-note/AN4445.pdf

Signed-off-by: Martin Hierholzer <martin.hierholzer@desy.de>
Change-Id: Ib705385a931275159bdae9b31caecc6ec9c0da1e
Reviewed-on: https://review.openocd.org/c/openocd/+/7015
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-08-08 20:50:20 +00:00
Frank Dischner df75bbd536 FreeRTOS: Always show current execution before scheduler is started
Previously, if the target was halted before the FreeRTOS scheduler was
started but after at least one thread was created, then the current thread
would be set to whichever thread had the highest priority. In addition to
being misleading, because that thread is not actually running, it can
cause issues with gdb. For instance, breaking somewhere before the first
thread is created will show the current execution as the current thread,
but stepping over a line that creates a thread will cause the current
thread to switch to the newly created thread and the current execution to
disappear. The sudden disappearance of the current execution thread seems
to confuse some versions of gdb.

With this change, the value of xSchedulerRunning is checked to determine
whether the scheduler has been started. If it hasn't, then a fake
'current execution' thread is always created and made the current thread.

Signed-off-by: Frank Dischner <frank.dischner@gmail.com>
Change-Id: Ide0fe7d9ffb9fac95cee4c805735f434c7c4934d
Reviewed-on: https://review.openocd.org/c/openocd/+/6935
Tested-by: jenkins
Reviewed-by: Asier Llano <asierllano@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-08-08 20:48:10 +00:00
Frank Dischner 3865c411ee FreeRTOS: Fix current thread ID when no threads are active
When there are no rtos threads or none are active, a fake thread with
ID 1 is created for the current execution, but the current thread ID was
never set to this new fake ID. This would lead to an incorrect attempt to
read stacked registers for this fake thread. Explicitly setting the
current thread ID to the fake ID ensures that the registers are read from
the core instead of calling freertos_get_thread_reg_list.

Signed-off-by: Frank Dischner <frank.dischner@gmail.com>
Change-Id: I694509a0e01df089429b20ff1b879fc0592b532d
Reviewed-on: https://review.openocd.org/c/openocd/+/6934
Tested-by: jenkins
Reviewed-by: Asier Llano <asierllano@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-08-08 20:47:52 +00:00
Tomas Vanek b5dd6faf8d target/cortex_a: remove unused CORTEX_A15_COMMON_MAGIC
Change-Id: I7dddc6cb7b0ee8aec7164998f1124b522e899f3d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reported-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7099
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-08-08 19:59:22 +00:00
Tomas Vanek a895b3b4f8 flash/nor/fespi: check target type
Change-Id: I09d3ed20966b37ec63c09c2ffb0e0403986cb1e5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7001
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
2022-08-01 08:59:39 +00:00
Tomas Vanek 1d8bc131a6 target/riscv: add common magic
Add common_magic member to struct riscv_info.
Introduce is_riscv() helper.

Change-Id: I1af05988ad869342ba5dc6d4d0ba0ec6a8bf7bc7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6999
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
2022-08-01 08:58:02 +00:00
Tomas Vanek 82e76262a1 target/riscv: use struct riscv_info instead of typedef riscv_info_t
Make the main RISC-V structure more compliant with OpenOCD coding style.
Other typedefs remains as is.

Change-Id: I5657ad28fea8108fd66ab27b2dfe1c868dc5805b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6998
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
2022-08-01 08:57:41 +00:00
Ben Bender 2c6571b9b1 arm_adi_v5: Adding Nuvoton NPCX quirk
We found that the NPCX has an issue with the byte lanes so that non byte
aligned writes aren't working. To overcome this, for byte accesses we
copy the byte to be written to all of the byte lanes.

doc: Document command nu_npcx_quirks

Signed-off-by: benjbender <benjbender@gmail.com>
[Andreas Fritiofson: Squashed commits]
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Change-Id: I9ef63bf692f4e68f57459e1ec33f3abcbf533cd2
Reviewed-on: https://review.openocd.org/c/openocd/+/6630
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-30 08:49:47 +00:00
Jacek Wuwer f97915f248 drivers/vdebug: add support for DAP level interface
This patch adds support for DAP interface to Cadence vdebug driver.
It implements a new transport layer for dapdirect_swd.

Change-Id: I64b02a9e1ce91e552e07fca692879655496f88b6
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6965
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-30 08:48:21 +00:00
Erhan Kurubas 49cf334e98 target/semihosting: export semihosting_common_handlers[] from header file
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I4add0c1dc7888497ee90fd02754607a16434b66f
Reviewed-on: https://review.openocd.org/c/openocd/+/7075
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-23 14:00:26 +00:00
Adrien Grassein 5ffc745ea3 tcl: ngultra: add target config file
ngultra is a Quad-R52 SoC + an FPGA.

Signed-off-by: Adrien Grassein <agrassein@nanoxplore.com>
Change-Id: I6a04eab3d9a7610e9dfa3d9f647868e579b6bd8a
Reviewed-on: https://review.openocd.org/c/openocd/+/7046
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-23 14:00:10 +00:00
Antonio Borneo 32f517f5d6 helper/jim-nvp: avoid camelcase error by deprecated API
Commit b8e18d292e ("helper/jim-nvp: comply with coding style
[1/2]") tags as deprecated the old CamelCase API of jim-nvp, so
that old patches already in gerrit or in user's local git can
still build while dumping a deprecated message.

So far, we have not found any such case, so the deprecated API can
be safely dropped in preparation of v0.12.0-rc1.

Drop the compile flag "-Wno-error=deprecated-declarations" and the
deprecated API.

Change-Id: I52ce47eda69a51c2dd29aac15f16e285492d89b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7052
Tested-by: jenkins
2022-07-23 13:59:49 +00:00
Antonio Borneo 757895b8ee openocd: src: replace SPDX to remaining files
With most of the files already processed through scripts, replace
manually the license to the few remaining files.

Change-Id: I3c7131e66b89ddad482f1074b5be5a9a69fdf6fd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7073
Tested-by: jenkins
2022-07-23 13:59:25 +00:00
Antonio Borneo b86f296ac6 openocd: src: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I30cd66ac7d737f1973c68fdbb841ffcf00e917c4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7072
Tested-by: jenkins
2022-07-23 13:59:13 +00:00
Antonio Borneo 057e566097 openocd: src/target: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I255ad17235ff1e01bf0aa4deed4d944e1d693ddb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7071
Tested-by: jenkins
2022-07-23 13:58:51 +00:00
Antonio Borneo 58f987aa85 openocd: src/rtos: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: If0194089baded7f58dc5d87a35d6e0aff9f43785
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7070
Tested-by: jenkins
2022-07-23 13:58:32 +00:00
Antonio Borneo eb56509fa4 openocd: src/jtag: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Ie873d12bb0fb838d0d6252e6b9ca3c2118853e9a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7069
Tested-by: jenkins
2022-07-23 13:55:06 +00:00
Antonio Borneo 533f0f1b87 openocd: src/helper: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I7851617e2682f97ccc3927e3941aadef2df63b54
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7068
Tested-by: jenkins
2022-07-23 13:54:09 +00:00
Antonio Borneo c270e96637 openocd: src/flash: replace the GPL-2.0-or-later license tag
Replace the FSF boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Ic7db91fe37d1139d42c99e303b3243b6c8fe3ea2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7067
Tested-by: jenkins
2022-07-23 13:16:27 +00:00
Antonio Borneo c3d3487d61 openocd: src: fix incorrect SPDX tags
The SPDX tag is aimed at machine handling and it's thus expected
to be placed in the first line in specific format.

Move the SPDX tag to the first line and fix it where needed.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Ie9a05f530009d482a4116eebd147fd7e1ee3d41e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7066
Tested-by: jenkins
2022-07-23 13:16:09 +00:00
Antonio Borneo 4db9add47f openocd: src: fix incorrect GPL license tag
Use the standard SPDX tag, where it was incorrectly applied.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Iaec63abc6e0a38e5b0ae0ea7f5ecee7ca007bbbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7065
Tested-by: jenkins
2022-07-23 13:15:54 +00:00
Antonio Borneo 665b501203 openocd: src: replace the GPL-2.0-only license tag
Replace the FSF boilerplate with the SPDX tag.

Change-Id: I29f51caa5ae9854d05ce7e150d168a7002607cd1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7064
Tested-by: jenkins
2022-07-23 13:15:43 +00:00
Antonio Borneo 5635fbc25a openocd: src: replace the incomplete GPL-2.0-or-later license tag
Few files have the FSF boilerplate without the latest statement on
where to get the GPL license.

Manually replace the FSF boilerplate with the SPDX tag.
While there, reorganize the copyright statement.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I0c908d01c010e24f9c7e94885e7fbed4ecf26a86
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7063
Tested-by: jenkins
2022-07-23 13:15:24 +00:00
Antonio Borneo d1a5921ce8 openocd: src: replace the GPL and BSD-Source-Code license tags
Add the new license text in the license pool.
Replace the GPL and BSD boilerplates with the SPDX tag.
Add the copyright owner of Atmel, as it was explicitly listed in
the BSD boilerplate text.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Ibb117dbf8402269be3e5ba4f4c472162494d813f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7062
Tested-by: jenkins
2022-07-23 13:14:59 +00:00
Antonio Borneo 7907d982fa openocd: src: replace the GPL with eCos exception 2.0 license tag
Add the license exception text in the license pool.
Add the exception chapter in license-rules.txt
Replace the boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: Ied513b7c9c0722ed2a9c11dbdff3fbf59f1b41ce
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7061
Tested-by: jenkins
2022-07-23 13:14:44 +00:00
Antonio Borneo 1b682fc4da openocd: src: replace the BSD-2-Clause-Views license tag
Add the license text in the license pool.
Replace the BSD boilerplate with the SPDX tag.
Add the copyright owner of Jim Project, as it was explicitly
listed in the boilerplate text.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I6dd004b1945773c10539016ce733d1fbfe776a9d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7060
Tested-by: jenkins
2022-07-23 13:14:24 +00:00
Antonio Borneo a5747fe4f5 openocd: src: replace the BSD-3-Clause license tag
Replace the BSD boilerplate with the SPDX tag.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I5a8cab2051eee7eb99adf67f9631b0827c1359de
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7059
Tested-by: jenkins
2022-07-23 13:14:01 +00:00
Antonio Borneo db0d4dbc3f openocd: src: add GPL license tag on files that miss it
Some file miss completely the license tag.

Add the SPDX tag, using the same GPL-2.0-or-later license of the
OpenOCD project.

The SPDX tag on files *.c is incorrect, as it should use the C99
single line comment using '//'. But current checkpatch doesn't
allow C99 comments, so keep using standard C comments, by now.

Change-Id: I1fb51e722232d14f050458a820c3041de3dc9138
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7058
Tested-by: jenkins
2022-07-23 13:13:39 +00:00
Antonio Borneo dba88e0238 openocd: src: remove duplicated GPL license tag
SPDX tag is replacing the FSF boilerplate.
For files that have both, remove the FSF boilerplate and keep only
the SPDX tag.

Change-Id: I04c4764d13d4ca92453f30ed16aeae53cd4c3fc8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7057
Tested-by: jenkins
2022-07-23 13:07:57 +00:00
Antonio Borneo 96202cda19 openocd: build: add SPDX tag
Add the SPDX tag to makefiles, configuration scripts and tcl files
present in the folders under src/

Change-Id: I1e4552aafe46ef4893d510da9d732c5f181784a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7051
Tested-by: jenkins
2022-07-23 13:06:38 +00:00
Pavel Kirienko 5e96b012af semihosting: fix return value of SYS_READ and SYS_WRITE
ARM/RISC-V semihosting calls SYS_READ/SYS_WRITE require
inversion of the result value as described in
"Semihosting for AArch32 and AArch64". Prior to
this patch, this was done correctly only if
(semihosting->is_fileio==false).

This patch has been tested with STM32F446.

Change-Id: I1b34c8d8393f7dfa66ee6539904a2eaf8f9154b0
Signed-off-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/232/
Reviewed-on: https://review.openocd.org/c/openocd/+/6803
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-02 08:28:30 +00:00
Antonio Borneo b7125c369c target: esp_xtensa_smp: fix clang report
The variable 'smp_break' is only set and used in case of smp.
But clang cannot track if 'target->smp' get modified between the
set and the use of 'smp_break', so it consider possible to use
'smp_break' uninitialized.

Initialize 'smp_break' to silent clang.

Change-Id: Ifa25a84fe9ffa25b8b58d7920ec77994c3b7ebfe
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 77287b8d47 ("target: add Espressif ESP32 basic support")
Reviewed-on: https://review.openocd.org/c/openocd/+/7050
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
2022-07-02 08:27:31 +00:00
Erhan Kurubas 06c3240155 semihosting: move semihosting_result_t from riscv.h to the semihosting_common.h
These enum values are useful for the arch level semihosting call handlers.
Currently riscv uses them, we also need similar return codes for the xtensa.

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I8f63749cc203c59b07862f33edf3c393cd7e33a9
Reviewed-on: https://review.openocd.org/c/openocd/+/7039
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-02 08:27:12 +00:00
Erhan Kurubas 6eda28ef67 tcl/esp32s3: check memory protection on gdb attach
Memory protection must be disabled to allow stub flasher
operate correctly.

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I6f292ee672ae001cd6e4df5d24eb7bb862639093
Reviewed-on: https://review.openocd.org/c/openocd/+/7037
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-07-02 08:25:00 +00:00