Refactor (clean up) the code in riscv_semihosting.c by moving
the magic sequence detection to its own function.
Cleanup the debug prints denoting the semihosting outcome
so that they are easier to understand when reading the OpenOCD's
verbose (debug) log.
Use le_to_h_u32() to convert memory buffer to instruction code
because RISC-V instructions are always little endian.
(target_buffer_get_u32() was incorrect for that reason.)
Change-Id: I3a3ce991336ceeeff023d459d0e28558059554e0
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
The macro named LIST_HEAD() clashed with a macro of same name in
the GNU libc file sys/queue.h.
This causes a warning in MacOS build due to some other system file
including sys/queue.h.
Rename LIST_HEAD() as OOCD_LIST_HEAD().
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: Ic653edec77425a58251d64f56c9f5f6c645ba0cd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Andrew Shelley <ashelley@btinternet.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8683
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andy <andrewjohnshelley@gmail.com>
"make dist" was broken because GNU Make was using a built-in rule
to try to build angie from angie.c . This is a limitation in Automake
when you add a whole subdir with the same name to EXTRA_DIST.
The Automake doc actually discourages adding whole subdirs.
Change-Id: I85ea4ecbd529b060c70f83bcfda7522e1730480d
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8600
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
No driver directly working with the USB hardware needs additional
time to complete the write op, they always return transfer complete
status immediately after submitting the transfer.
Although there is implemented correct waiting path in cmsis_dap_usb_write()
it was marked by error logs to catch any suspicious behaviour during
debugging of asynchronous libusb transfers.
However there are drivers which need waiting to finish write op:
at least usbipd-win, IP tunnelled USB driver, was reported
to flood the log with the related errors.
Change LOG_ERROR to LOG_DEBUG_IO in the code waiting to finish write op.
Reported-by: Quentis Ghyll <quentisgh@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Iedf2c96d851f22e694efaf13a2d6a2a408cee1ad
Reviewed-on: https://review.openocd.org/c/openocd/+/8640
Tested-by: jenkins
CMSIS-DAP bulk backend read op used two timeouts: transfer timeout
used in libusb_fill_bulk_transfer() and wait timeout used optionally
in libusb_handle_events_timeout_completed().
The real usage is limited to two cases only:
1) blocking read: the same timeout is used for both transfer
and wait
2) non-blocking read: transfer timeout is used in
libusb_fill_bulk_transfer(),
libusb_handle_events_timeout_completed() is called with zero timeout.
Use blocking flag as read op parameter to distinguish between
these two cases.
See also [1]
Link: [1] 8596: jtag: cmsis_dap: include helper/time_support.h | https://review.openocd.org/c/openocd/+/8596
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ia755f17dc72bb9ce8e02065fee6a064f8eec6661
Reviewed-on: https://review.openocd.org/c/openocd/+/8639
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Variable `target->semihosting` is always initialized
in risv_init_target() to a non-NULL value.
For that reason, checks like `if (target->semihosting)`
are redundant (dead code).
Remove them to not confuse code readers. Replace them by assertions.
Change-Id: I85ef52300e240cfcb0119db6169993bc4767de8f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
I successfully programmed a NUCLEO-C071RB with these changes.
Change-Id: Ib57a77fa18f8a0e8c882e2250d6111c588d76887
Signed-off-by: David (Pololu) <dev-david@pololu.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8525
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
While at it, rework the log messages, for example by removing spaces
or punctuation marks at the end of the message.
Change-Id: I3dd4314d354b5628144f98325540926981778616
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8665
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() to indicate which target the message belongs to.
Change-Id: Ib1cd37fe6eca2ea42095d2d371116446a936e20a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8664
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: Ia7e9629d89f2e6cb3f9c156e74ac1a02960f9373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8663
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: I2f937c937a5c09d91dc82b4323be3276ab60b01a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8662
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Add a target-related log function for user messages as it already
exists for other log levels.
Change-Id: I9076677d6451b900332583e748bab3f83df56d3b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8661
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
If a sufficient delay was used before reading `abstractcs` during the
batch execution, `dm->abstract_cmd_maybe_busy` was not cleared and the
following call to `wait_for_idle_if_needed()` (e.g. on `resume`), would
result in a call to `wait_for_idle()` performing a redundant read of
`abstractcs`.
While this is not a bug, it impedes the performance.
Change-Id: I9d234ef6d53af96c60892d71247c10e631dfcc3b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Remove the prefix since it is redundant.
Change-Id: Ib064d1031f5ad14ed7711c09bb5f5254d0054d59
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8633
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Remove the prefix since it is redundant.
Change-Id: Ieecfb3583d484847514f1298e819ccf6d26abd84
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8632
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I16fd6a88b533fac19b4c622cf9740fd32ba7892c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8611
Reviewed-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Change the type of task_name[] to char in order to drop a cast.
Change-Id: I233fc862e972e52130fd4ffcb29a3da36f4f8923
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8599
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Using strcpy is potentially dangerous so just use a safer and easier way
to do the same.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Id85f3b7f8af1eaf14c9951ae710546d2437c70b5
Reviewed-on: https://review.openocd.org/c/openocd/+/8597
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The command 'arm core_state' uses the enum in 'arm->core_state' as
an index in the table of strings to print the core state.
With [1] the enum has been extended with the new state for AArch64
but not the corresponding table of strings.
This causes an access after the limit of arm_state_strings[].
Rewrite the table using c99 array designators to better show the
link between the enum list and the table.
Add the function arm_core_state_string() to check for out-of-bound
values allover the file.
Change-Id: I06473c2c8088b38ee07118bcc9e49bc8eafbc6e2
Fixes: [1] 9cbfc9feb3 ("arm_dpm: Add new state ARM_STATE_AARCH64")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8594
Tested-by: jenkins
rtt_write_channel may write less data than requested,
default device buffer size for channel 0 is 16 bytes,
so currently anything larger than this is dropped.
This fix implements per connection buffer and uses the
connection->input_pending flag to retry writes.
Change-Id: I00c845fccb0248550ad0f0fd9cda7bac7976b92b
Signed-off-by: fanoush <fanoush@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8360
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Registers were not invalidated if the hart became unavailable.
* Improved logging in the case register invalidation involves loss of
information.
Change-Id: Icfb5e190dd6dcb1a97e4d314d802466cab7a01e4
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This changes will allow to unite read_memory/write_memory fucntions
to one access function
(1) Replaced read/write functions arguments with one structure
(2) Unified read_memory/write_memory function pointers
to be stored in same structure
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
this commit fixes a regression introduced in
ba8c1eef5a.
The regression was caused by removal of these lines:
```
- /* Register prefix: "csr_" or "custom_" */
- strcpy(name, reg_type);
- name[strlen(reg_type)] = '_';
```
causing all CSR names with custom names to be parsed as empty strings.
Add maskisr command support to Xtensa NX targets allowing masking
of interrupts during single stepping.
Change-Id: I3835479de8015f1a2842afd1aeab24829e385031
Signed-off-by: Henrik Mau <henrik.mau@analog.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8575
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: If52e3935b57e4c39212ce6b5111ff65159de1373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8580
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: I4b86b206d17dead0662388e827204b40a7d29edd
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8579
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I8707342c602cea735c5a423b37ebe40a3aafb137
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: I9c23c0479ba40be24e471309e720060cd03763ee
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8577
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also convert the Bus Pirate to the common PROCESS_ADAPTERS logic.
Change-Id: Ifa8ebcee380c16d7e308ba7a75dbffdb74208285
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8533
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Tested-by: jenkins
The stlink driver, both in dapdirect and in HLA modes, pretends to
store locally the value of the adapter speed in order to use it
later-on during adapter initialization.
It doesn't work in dapdirect mode since the code to store locally
the value will not be executed until the adapter is already fully
initialized.
This cause an issue in dapdirect mode:
- due to the local value, still kept at -1, the adapter will be
initialized to the lowest clock speed (5 KHz on stlink v2 in SWD
mode);
- after the adapter initialization the framework will again set
the speed with the value requested by the user.
Some target, like nRF51822, only accepts JTAG/SWD speed in a
defined range of frequencies. The initial speed of 5 KHz used by
dapdirect can be out of range, making the target debug port not
working.
The adapter framework already stores the value of speed and makes
it available through adapter_get_speed_khz().
Drop struct hl_interface_param::initial_interface_speed.
Let the code to use adapter_get_speed_khz().
Change-Id: Ie11bf0234574f2a9180d3d3a16efb78e08dfcd86
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8574
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Change the variable name to 'is_configure' to be compatible with the
coding style and use 'bool' as data type.
Change-Id: I8609f9807c8bd14eaf6c93acf63fd51b55c9bbbb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8573
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The functions:
- semihosting_opcode_to_str();
- semihosting_write_fields();
- semihosting_set_field();
are not referenced outside the file.
Make them static.
Change-Id: Ia8d35554673145fdfe0e501543eb18919863039f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8551
Tested-by: jenkins
Evgeniy Naydanov
Evgeniy Naydanov
Jan Matyas
Antonio Borneo
R. Diez
Tomas Vanek
David (Pololu)
Marc Schink
Paul Fertser
fanoush
Pete Moore
Farid Khaydari
Anatoly Parshintsev
Parshintsev Anatoly
Henrik Mau