Commit Graph

9460 Commits

Author SHA1 Message Date
Antonio Borneo f4612e06c6 tcl/stm32mp15x: freeze watchdog, recover SWD after power cycle
Freeze the IWDG watchdog when cores are halted to prevent a reset
while debugging.

The PMIC present on some board senses the nsrst and forces a power
cycle to the target. The power cycle causes the SWJ-DP to restart
in JTAG mode. If the debugger is using SWD, the mismatch triggers
an error after the reset command.
Ignore the error detected by 'dap init' and proceed executing the
handler. The error in 'dap init' will force a reconnect during the
following 'dap apid', restoring the SWD functionality.

Change-Id: I04fcda6a5b8a1b080ab4e8890ecd0754d5ed12d9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6599
Tested-by: jenkins
2021-10-25 16:11:22 +00:00
Antonio Borneo 8a522d96c7 flash/nor/psoc6: fix doxygen comment
Commit 64c2e03b23 ("flash/nor: improved API of flash_driver.info
& fixed buffer overruns") changes the prototype of the function
psoc6_get_info() but didn't update the list of parameters in the
doxygen comment.

Fix the doxygen comment.

Change-Id: I1dce018b60d080973c5e351490d4d7baba422d74
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 64c2e03b23 ("flash/nor: improved API of flash_driver.info & fixed buffer overruns")
Reviewed-on: https://review.openocd.org/c/openocd/+/6620
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-10-25 16:10:40 +00:00
Antonio Borneo 0184ddba18 command: document enum command_mode
Add the description to doxygen documentation.

Change-Id: Iec04b4a37088e1b3b52ca84102820f450528b5b9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6593
Tested-by: jenkins
2021-10-25 16:10:28 +00:00
Antonio Borneo 8f1971295b mips64_pracc: fix three dead assignments
Clang scan-build complains for three dead assignments:
	Although the value stored to 'data' is used in the
	enclosing expression, the value is never actually read
	from 'data'

	Value stored to 'address' is never read

Remove the useless assignment and the variable 'data'.

Change-Id: Ie8dcb74b1c1aa5eea1acd06b3c45c5b44954c9e7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6592
Tested-by: jenkins
2021-10-25 16:10:16 +00:00
Antonio Borneo 327040ad74 target/lakemont: fix dead assignment
Clang scan-build complains for a dead assignment:
	Value stored to 'tapstatus' is never read

Remove the assignment and add a comment to point for a potential
removal of the line.

Change-Id: Iad2fdc7e6faf650e24cc086ee74c745acb0d1c73
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6591
Tested-by: jenkins
2021-10-25 16:10:04 +00:00
Antonio Borneo 01de751025 armv8: fix five dead assignments
Clang scan-build complains for five dead assignments:
	Value stored to 'retval' is never read

Check the returned value and propagate the error.

Change-Id: I01172887a056d6f39ddcf2807848423970db1e89
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6590
Tested-by: jenkins
2021-10-25 16:09:26 +00:00
Antonio Borneo 48d74f9711 arm_semihosting: fix two dead assignments
Clang scan-build complains for two dead assignments:
	Value stored to 'r' is never read

Use the variable in the following line, instead of re-computing
the pointer.

Change-Id: I5d4069872be9da85fb28bbe0a82020b90f1efe46
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6589
Tested-by: jenkins
2021-10-25 16:09:12 +00:00
Antonio Borneo 57262ebeae arm_tpiu_swo: fix two dead assignments
Clang scan-build complains for two dead assignments:
	Value stored to 'retval' is never read

Since the timer callback should not return error, print an error
message if the data cannot be send out. Add a FIXME comment
because in current code there is no string/name to report which
connection has failed.

In command tpiu enable check the returned value and propagate the
error.

Change-Id: I9a89e4c4f7b677e8222b2df09a31b2478ac9ca4f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6588
Tested-by: jenkins
2021-10-25 16:09:02 +00:00
Antonio Borneo b3f052ba9d jtag/core: fix unused assignment
Clang scan-build complains about a variable assigned but never
used.
	Although the value stored to 'val' is used in the
	enclosing expression, the value is never actually read
	from 'val'

Remove the dead assignment. While there, reduce the scope of the
variable by declaring the variable at the point of first use.

Change-Id: Ibe2b55a7d70597833cfa7f3d843e7c3d2407f2df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6587
Tested-by: jenkins
2021-10-25 16:08:41 +00:00
Yasushi SHOJI 9188115296 gitignore: Add GNU Global tag files
This commit adds GNU Global[1] tag files to .gitignore.

[1]: https://www.gnu.org/software/global/

Change-Id: Ia09fb359cfdfeadd9538cf6352d353e6475e85c7
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6541
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-10-02 13:18:34 +00:00
Yasushi SHOJI 05752557dd helper: Remove src/helper from include dirs
The header files under src/helper/ can currently be included with
either

    #include <bits.h>
    or
    #include <helper/bits.h>

This is because we specify both "src/" and "src/helper/" directories
as include directories.  Some files name under "src/helper/", such as
types.h, log.h, and util.h are too generic and could be ambiguous
depending on the search path.

This commit remove "src/helper/" from our include dir and make C files
include explicitly.

Change-Id: I38fc9b96ba01a513d4a72757d40007e21b502f25
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6507
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-10-02 13:18:15 +00:00
Tim Newsome e487205410 uint64_t->target_addr_t for stack pointers.
This might be incomplete. It's just a quick attempt to reduce some of
the difference between riscv-openocd and mainline. Other stack pointers
can be updated as I come across them.

Change-Id: Id3311b8a1bb0667f309a26d36b67093bfeb8380a
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6586
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-10-02 13:17:41 +00:00
Antonio Borneo b5a24386e4 stlink-dap: add 'cmd' to send arbitrary commands
Either for testing new commands and to retrieve information that
don't fit in any specific place of OpenOCD, for example monitoring
the target's VDD power supply from a TCL script.

Change-Id: Id43ced92c799b115bb1da1c236090b0752329051
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6564
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-10-02 13:17:04 +00:00
Antonio Borneo 745b40d99a udev: add ASIX Presto programmer
The driver is in OpenOCD since 2007, but the USB VID/PID have
never been listed in udev rules.

Change-Id: I77df469929dd7f6b6483678c0e76f22c30a7614c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6563
Tested-by: jenkins
2021-10-02 13:16:30 +00:00
Tarek BOCHKATI 98d9f1168c target: reset target examined flag if target::examine() fails
For example: before this change in cortex_m_examine, if we fail reading CPUID
we return a failure code but target was set to examined which is not consistent.

Change-Id: I9f0ebe8f811849e54d1b350b0db506cb3fdd58f4
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6548
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-10-02 13:15:57 +00:00
Tarek BOCHKATI ba1061fe1d target/cortex_m: enhance multi-core examine logs
Giving the example of STM32WL55x the examine log is the following:
  Info : stm32wlx.cpu0: hardware has 6 breakpoints, 4 watchpoints
  Info : stm32wlx.cpu1: hardware has 4 breakpoints, 2 watchpoints

After this change the examine log becomes:
  Info : stm32wlx.cpu0: Cortex-M4 r0p1 processor detected
  Info : stm32wlx.cpu0: target has 6 breakpoints, 4 watchpoints
  Info : stm32wlx.cpu1: Cortex-M0+ r0p1 processor detected
  Info : stm32wlx.cpu1: target has 4 breakpoints, 2 watchpoints

Change-Id: I1873a75eb76f0819342c441129427b38e984f0df
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6553
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-10-02 13:12:26 +00:00
Tarek BOCHKATI c3993d3188 tcl/stm32wlx.cfg: comply with new jimtcl expr syntax
Change-Id: I2e9fd528817b14396c7643801aeea5c8dde668e0
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6557
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-25 13:37:28 +00:00
Alex Crawford 2f424b7eb7 driver/linuxgpiod: add support for opendrain srst
Some MCUs (e.g. the STM32F3) directly expose the internal reset line to
an external pin. When this signal is driven by a push/pull line, it can
actually be inhibited by the external driver. This results in a setup
where the MCU cannot reset itself, for example, by a watchdog timeout or
a sysreset request. To fix this condition, support for open drain output
on the SRST line is required.

Note that because `reset_config srst_open_drain` is the default, all
users of this adapter will switch over to an open drain output unless
explicitly configured otherwise.

Signed-off-by: Alex Crawford <openocd@code.acrawford.com>
Change-Id: I89b39b03aa03f826ed3c45793412780448940bcc
Reviewed-on: https://review.openocd.org/c/openocd/+/6559
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-25 13:15:05 +00:00
Tim Newsome 5765a0ce14 Speed up remote bitbang.
1. Use TCP_NODELAY, which makes things twice as fast.
2. Get rid of a bunch of unnecessary socket block/non-block calls, which
improves speed another 10% or so.

Change-Id: I415db5746d55374a14564b1973b81e3517f5cb67
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6534
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-25 13:13:59 +00:00
Antonio Borneo e48093b395 openocd: prevent jimtcl error message while testing commands
The jimtcl API Jim_GetCommand() sets an error message when the
command is not found and flag JIM_ERRMSG is set.
OpenOCD is checking if the command has already been registered,
thus 'command not found' is the desired case.

Pass flag JIM_NONE to prevent jimtcl from setting the error
message.

Change-Id: I3329c2f8722eda0cc9a5f9cbd888a37915b46107
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6562
Tested-by: jenkins
2021-09-25 13:13:28 +00:00
Antonio Borneo 7b504370f7 arm_tpiu_swo: fix support for deprecated 'tpiu' command before 'init'
Commit dc7b32ea4a ("armv7m_trace: get rid of the old tpiu code")
is not handling correctly the old 'tpiu' command if it is run
during the config phase (before command 'init').

Move the call to the old event handler 'trace-config' in function
jim_arm_tpiu_swo_enable(), so it is correctly executed after
'init'.

Add the call to the old event handler 'trace-config' also during
jim_arm_tpiu_swo_disable(), to match the old behaviour.

Add more information while alerting that the event 'trace-config'
is deprecated.

Change-Id: If831d9159b4634c74e19c04099d041a6e2be3f2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: dc7b32ea4a ("armv7m_trace: get rid of the old tpiu code")
Reviewed-on: https://review.openocd.org/c/openocd/+/6561
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
2021-09-25 13:13:10 +00:00
Antonio Borneo 2a43137619 arm_adi_v5: drop ANY_ID from table dap_part_nums
The initial version of the table dap_part_nums contains only the
part number of the device and not the manufacturer ID.
This causes collisions between devices with same part number but
from different manufacturer.
The table has been extended to include the manufacturer JEDEC code
in commit 2f131d3c30 ("ARM ADIv5: CoreSight ROM decode part
number and designer id").
For two old/legacy table's entries reported without manufacturer
code it was defined a special ANY_ID manufacturer, meaning skip
the check for manufacturer!
The two legacy entries report the comment "from OMAP3 memmap", and
thanks to the associated string has been possible through Google
to identify a Master Report [1] about using OpenOCD with the OMAP3
in a BeagleBoard. The ROM table is printed with OpenOCD command
"dap info 1" at page 8 and reports the Peripheral ID required to
extract the manufacturer ID that, out of any surprise, belong to
Texas Instruments.

Set the two missing manufacturer ID to Texas Instruments JEDEC
code.

Remove the now redundant definition and use of ANY_ID.

While revisiting this old code, remove also the useless comment
"0x113: what?". It was introduced in commit ddade10d4a ("ARM
ADIv5: "dap info" gets more readable") and from the same dump in
[1] it's clearly another element in OMAP3. It is listed as entry
0x8 in the ROM table and there is no further info available.
OpenOCD will anyway list it as:
	Designer is 0x017, Texas Instruments
	Part is 0x113, Unrecognized
Another link https://elinux.org/BeagleBoardOpenOCD reports the
text "Part number 0x113: This is ????", which sounds familiar!
No public document from Texas Instruments reports what is this
device at address 0x54012000.

[1] Warren Clay Grant - University of Texas at Austin
    "Implementation of an Open Source JTAG Debugging Development
    Chain for the BeagleBoard ARM® Cortex A-8" - May 2012
Link: https://repositories.lib.utexas.edu/bitstream/handle/2152/ETD-UT-2012-05-5478/GRANT-MASTERS-REPORT.pdf

Change-Id: I7e007addbb5c6e90303e4e8c110c7d27810fbe9c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6454
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
2021-09-25 13:11:41 +00:00
Antonio Borneo 122f36ed7b arm_adi_v5: add arm Neoverse N2 part numbers
Change-Id: Ib7a8c9d460f12762f6d106e9331e84b6d2dec213
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6453
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:11:23 +00:00
Kevin Burke a931c99f5b arm_adi_v5: add arm Neoverse N1 part numbers
Split from change https://review.openocd.org/6077/

Change-Id: I5e3d3736beb741de3940ea6e23b0ccbf47e8dec7
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6452
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:11:10 +00:00
Antonio Borneo 8f73bd3d48 arm_adi_v5: add arm Cortex-R52 part numbers
Extract new part numbers from Arm Cortex-R52 Processor Technical
Reference Manual Revision r1p3 and add them to the array
dap_partnums.

Change-Id: I8020f36de587951af60422ef33d7e438dc7d9d53
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6451
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:07:41 +00:00
Antonio Borneo c55fbe190b arm_adi_v5: add arm SoC-600 part numbers
Extract new part numbers from ARM CoreSight System-on-Chip SoC-600
Technical Reference Manual Revision r4p1 and add them to the array
dap_partnums.

Change-Id: I88d8aa3c084f6e832b75032e75bfb6d377a08360
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6450
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:06:53 +00:00
Antonio Borneo 02b5fa5103 arm_adi_v5: add helper to search for part number
Improve code readability and prepare to re-use the helper.

Change-Id: Iee5e01047c82be3dd86707f5c283f0b20cc4070d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6449
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:06:01 +00:00
Kevin Burke cf6909a57c arm_adi_v5: move in a separate function devtype decode/display
For readability, move in a separate function the decoding and the
display of devtype register.
The function will be reused with ADIv6.

Split from change https://review.openocd.org/6077/

Change-Id: I7a26a2c9759d5db5f9acfae5c169b90b3deb2f18
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6448
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 13:04:53 +00:00
Antonio Borneo ddbc13a6f2 arm_adi_v5: simplify handling of AP type
The complete AP type should include 'class' and 'manufacturer'.

Cleanup the definition of AP type from AP_REG_IDR register.
Include the check of 'class', together with manufacturer and type.
Add the new MEM-AP from ARM IHI0074C.

Change-Id: Ic8db7c040108ba237b54f73b1abe24b8b853699b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6447
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
2021-09-25 13:00:55 +00:00
Antonio Borneo 06d2e430db arm_coresight: add include file and use it
Several magic numbers related to ARM CoreSight specification
IHI0029E are spread around OpenOCD code.

Define through macros the ARM CoreSight magic numbers and collect
them in a single include file.
Use the new macros wherever possible.

Change-Id: I9b0c1c651ce4ffbaf08d31791ef16e95983ee4cb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6446
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
2021-09-25 13:00:27 +00:00
Antonio Borneo c4e6034e26 armv7m.h: relax dependency from 'arm_adi_v5.h'
The include file 'armv7m.h' includes 'arm_adi_v5.h' only to get
the definition of 'struct adiv5_ap', but doesn't need the struct
content.

Reducing the cross dependencies speeds-up the compile time during
code development by avoiding re-compiling file.

Relax the dependency by locally declaring 'struct adiv5_ap' in
'armv7m.h' and remove the include of 'arm_adi_v5.h'.
Fix the other files that have now lost the includes file that
'arm_adi_v5.h' depends from.

Change-Id: Ic0d40b17db6045fa43f348bda83eaf211a6b347d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6468
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-25 12:59:12 +00:00
Oleksij Rempel a0bd3c9924 Partially Revert "flash/stm32l4x: introduce flash programming without loader"
This partially reverts commit 1247eee4e6.

There is no reasonable use cases where work-area should be enabled
and working, and it can't be used for the flash loader.

Instead of introducing driver specific property, users can disable
flash load by disabling work-area, for example by setting it to 0.

But still we keep the function stm32l4_write_block_without_loader
to be used when workarea is not available (no sufficient size or zero)

Change-Id: Ibb046c74df354c6067bac978e8ef7efb47d9fd2b
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6569
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-09-18 18:15:35 +00:00
Tarek BOCHKATI a1903f2867 flash/stm32l4x: fix dual bank support for STM32L552xC devices
For STM32L552xC devices with 256K flash:
  dual bank mode is activated if DB256 is set
  page size is 2KB if DBANK is set

For parts with 512K (aka STM32L5x2xE):
  DBANK controls both of dual/single bank mode and page size as well.

Change-Id: I8be668d5552fefe81acffaf2e3e35ef5e938162e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reported-by: Patrik Bachan <diggit@users.sourceforge.net>
Fixes: https://sourceforge.net/p/openocd/tickets/317/
Reviewed-on: https://review.openocd.org/c/openocd/+/6538
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-09-18 18:15:15 +00:00
Tarek BOCHKATI 050fcb1760 helper/command: fix echo return values
the echo command is managed through command handler and not jim_handler
to be consistent rename the handler from jim_echo to handle_echo
and update the return values

Fixes: 4747af362d (JIM: document "echo" command)
Change-Id: I5ae87ea802d8430b573fb83daa6b35490b5d5775
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6549
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:27:46 +00:00
Florian Zaruba 1efd12a6de jep106.inc: Update to revision JEP106BC
Signed-off-by: Florian Zaruba <florian@openhwgroup.org>
Change-Id: I566eb331b2884de3df5ad3f02c2ec7961539257b
Reviewed-on: https://review.openocd.org/c/openocd/+/6551
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:27:31 +00:00
Andreas Sandberg 564e7576ab stlink: Add PID for V3 device without MSD
Add the 0x3754 PID used by some STLINK-V3 devices when MSD has been
disabled. This PID has been observed on a Nucleo-G431RB board.

Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Idb85874fa5a9dff5940bae7e95426a956693b976
Reviewed-on: https://review.openocd.org/c/openocd/+/6555
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:27:16 +00:00
Andreas Sandberg 00b16b294f hla: Increase HLA_MAX_USB_IDS
We are already at the limit for the number of VID/PID pairs declared
in stlink.cfg and stlink-dap.cfg. Increase the maximum number of pairs
from 8 to 16 to make room for a few more devices.

Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Ifad8e7ef67b930edbb5421730f00eb3390812f06
Reviewed-on: https://review.openocd.org/c/openocd/+/6554
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:26:57 +00:00
Antonio Borneo 73c6416799 target: do not cast NULL in assignment
NULL is defined as 'void *'.
There is no need to cast NULL while assigning it to a pointer.

Change-Id: Ibaf18e5d47329707ec9c1c184cd4bba2e8e702ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6540
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
2021-09-18 15:26:14 +00:00
Antonio Borneo 79800db98a openocd: remove last NULL comparisons
The NULL pointers preceded by cast where not detected by the
scripting tools looking for NULL pointer comparison.

Remove them and, while there, further simplify the code and apply
the other coding style rules.

Change-Id: Ia7406122e07ef56ef311579ab0ee7ddb22c8e4b5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6539
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-18 15:22:30 +00:00
Tarek BOCHKATI ea562985b5 gerrit url: update the gerrit server address to https://review.openocd.org
change the gerrit server address from http://openocd.zylin.com to the new
address in order to avoid re-directions.

Change-Id: I76e128c277f63783d1a6f63a6a387aa838f51f80
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6481
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-18 15:21:02 +00:00
Tarek BOCHKATI c865879eb8 doc: add a note to use 'stm32l4x option_load' after changing option bytes
Change-Id: I502be27da892e393731d11e02203c736e77033d0
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6533
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-09-17 12:59:05 +00:00
Tarek BOCHKATI fc74ccda52 tcl/target/stm32(f7/h7)x: do not assume presence of the reset
do not force the presence of the reset line, since some custom boards
may do not contain the reset line.

Change-Id: I031ab34012b34a1b49def9db16461f9de0ae29cc
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reported-by: Fleck <fleckz@users.sourceforge.net>
Fixes: https://sourceforge.net/p/openocd/tickets/316/
Reviewed-on: https://review.openocd.org/c/openocd/+/6506
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
2021-09-17 12:57:57 +00:00
Tarek BOCHKATI b61a280860 flash/stm32l4x: fix flash programming in 64-bit hosts
stm32l4_work_area struct is shared between the loader and stm32l4x flash driver

'*wp' and '*rp' pointers' size is 4 bytes each since stm32l4x devices have
32-bit processors.

however when used in openocd code, their size depends on the host
  if the host is 32-bit, then the size is 4 bytes each.
  if the host is 64-bit, then the size is 8 bytes each.

to avoid this size difference, change their types depending on the
usage (pointers for the loader, and 32-bit integers in openocd code).

Change-Id: I0a3df4bb4bf872b01cdb9357eb28307868d7d469
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6556
Tested-by: jenkins
Reviewed-by: Yestin Sun <sunyi0804@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-09-12 14:26:31 +00:00
Tim Newsome f78f9a90a6 In SMP config, replicate watchpoints on each core
This works well with gdb on RISC-V, since hardware breakpoints are
per-core and gdb thinks that targets are really processes on a machine.

Are there targets where this is a bad idea? Should the target definition
specify whether this behavior is desired or not?

Change-Id: Ia32be2707b04347fd8bf2ca6fbb2b0ceaad3704a
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6528
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-11 12:08:38 +00:00
Tarek BOCHKATI e63297045b flash/stm32l4x: do not use magic number for dual bank option bits
Change-Id: I27211e7d44b48f65546e31710ec6ae129acb416f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6537
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-09-11 12:06:42 +00:00
Tarek BOCHKATI 5070425d6a flash/stm32l4x: introduce is_max_flash_size and use it
Change-Id: Idb421b9cf737d222baf4dd890032f69dec7a366e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6536
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-09-11 12:05:15 +00:00
Tarek BOCHKATI cdb6ea4f9f flash/stm32l4x: fix segmentation fault with HLA adapters and STM32WLx devices
CPU2 (Cortex-M0+) is supported only with non-hla adapters because it is on AP1.
Using HLA adapters armv7m.debug_ap is null, and checking ap_num triggers
a segfault.

Change-Id: I501f5b69e629aa8d2836b5194063d74d5bfddb12
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Fixes: https://github.com/STMicroelectronics/OpenOCD/issues/6
Reviewed-on: https://review.openocd.org/c/openocd/+/6535
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-09-11 12:03:02 +00:00
Tarek BOCHKATI f24a283ac7 flash/nor/tcl: 'flash list' command: add the flash bank target
add the target assigned to the flash bank at creation
this is useful in daisy chains, to filter out the target banks.

Change-Id: Ic39e44914e34bb62991783762e5a65ef8871e82f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6426
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-09-04 07:26:10 +00:00
Tarek BOCHKATI 9f733ba2f2 flash/nor/tcl: fix the flash name returned by 'flash list' command
The 'flash list' command returns the driver name as flash name which seems
to be incorrect, the proposal is:
 - to fix this by returning the flash name
 - and add a new item 'driver' in the returned list

example:
before the change
> flash list
  {name stm32l4x base 134217728 size 0 bus_width 0 chip_width 0}
  {name stm32l4x base 201326592 size 0 bus_width 0 chip_width 0}
  {name stm32l4x base 200933376 size 0 bus_width 0 chip_width 0}

after the change
> flash list
  {name stm32l5x.flash_ns driver stm32l4x ...}
  {name stm32l5x.flash_alias_s driver stm32l4x ...}
  {name stm32l5x.otp driver stm32l4x ...}

Change-Id: I6d307b73c457549981a93c260be344378719af82
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6425
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-04 07:25:56 +00:00
Tarek BOCHKATI 57c61cee4b tcl/board: add st_nucleo_g4.cfg to cover known STM32G4 NUCLEO boards
known boards are NUCLEO-G431KB, NUCLEO-G431RB and NUCLEO-G474RE

note: this work safely with B-G431B-ESC1, B-G474E-DPOW1,
      STM32G474E-EVAL and STM32G484E-EVAL

Change-Id: I132a97e1816620b182983edc8a4b272b52b9241d
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5484
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2021-09-04 07:25:20 +00:00