* also changes the print format for cover statements to be more uniform
with the asserts, allowing easier parsing of cover path
* this allows diambiguation of properties with the same name but
different paths (see https://github.com/YosysHQ/sby/issues/296)
This extends the experimental incremental JSON API to allow arbitrary
smtlib subexpressions, defining smtlib constants and to allow access of
signals by their .yw path.
It also fixes a bug during .yw writing where values would be re-emitted
in later cycles if they have no newer defined value and a potential
crash when using --track-assumes.
The --track-assumes option makes smtbmc keep track of which assumptions
were used by the solver when reaching an unsat case and to output that
set of assumptions. This is particularly useful to debug PREUNSAT
failures.
The --minimize-assumes option can be used in addition to --track-assumes
which will cause smtbmc to spend additional solving effort to produce a
minimal set of assumptions that are sufficient to cause the unsat
result.
Previously `unroll_stmt` would recurse over the smtlib expressions as
well as recursively follow not-yet-emitted definitions the current
expression depends on. While the depth of smtlib expressions generated
by yosys seems to be reasonably bounded, the dependency chain of
not-yet-emitted definitions can grow linearly with the size of the
design and linearly in the BMC depth.
This makes `unroll_stmt` use a `list` as stack, using python generators
and `recursion_helper` function to keep the overall code structure of
the previous recursive implementation.
Rename formal cells in addition to witness signals. This is required to
reliably track individual property states for the non-smtbmc flows.
Also removes a misplced `break` which resulted in only partial witness
renaming.
The previous implementation for finding the end of a top-level s-expr
exhibited quadratic behavior as it would re-scan the complete input for
the current expression for every new line. For large designs with
trivial properties this could easily take seconds and dominate the
runtime over the actual solving.
This change remembers the current nesting level between lines, avoiding
the re-scanning.
Python 3.12 emits a SyntaxWarning when encountering invalid escape
sequences. They still parse as expected. Marking these raw produces
the same result without the warnings.
This makes clk2fflogic add an attr to $ff cells that carry the state of
the emulated async FF. The $ff output doesn't have any async updates
that happened in the current cycle, but the $ff input does, so the $ff
input corresponds to the async FF's output in the original design.
Hence this patch also makes the following changes to passes besides
clk2fflogic (but only for FFs with the clk2fflogic attr set):
* opt_clean treats the input as a register name (instead of the
output)
* rename -witness ensures that the input has a public name
* the formal backends (smt2, btor, aiger) will use the input's
name for the initial state of the FF in witness files
* when sim reads a yw witness that assigns an initial value to the
input signal, the state update is redirected to the output
This ensures that yosys witness files for clk2fflogic designs have
useful and stable public signal names. It also makes it possible to
simulate a clk2fflogic witness on the original design (with some
limitations when the original design is already using $ff cells).
It might seem like setting the output of a clk2fflogic FF to update the
input's initial value might not work in general, but it works fine for
these reasons:
* Witnesses for FFs are only present in the initial cycle, so we do
not care about any later cycles.
* The logic that clk2fflogic generates loops the output of the
genreated FF back to the input, with muxes in between to apply any
edge or level sensitive updates. So when there are no active updates
in the current gclk cycle, there is a combinational path from the
output back to the input.
* The logic clk2fflogic generates makes sure that an edge sensitive
update cannot be active in the first cycle (i.e. the past initial
value is assumed to be whatever it needs to be to avoid an edge).
* When a level sensitive update is active in the first gclk cycle, it
is actively driving the output for the whole gclk cycle, so ignoring
any witness initialization is the correct behavior.
Can now append a user defined number of steps to input traces when joining.
If the number of steps is +ve, inputs are all set to 0.
If -ve then steps are skipped.
If all of steps are skipped (including init step) then the input trace will not be copied.
If more than one input trace is provided, the append option will need to be provided the same number of times as there are input traces.
Intended for use with SCY to combine sequential cover traces.
Arbitrary number of inputs, will load all and attempt to join them. Each trace will be replayed one after the other, in the same order as the files are provided.
Mismatch in init_only fields seems to work fine, with values in subsequent traces being assigned in the initial only if they weren't previously defined.
Uncertain if a mismatch in non init_only fields will cause problems.
Fixes WitnessSig.__eq__().
Adds helper functions to WitnessValues and ReadWitness classes.
While not setting the smtoffset here was clearly a bug, I think using
`chunk.offset` only worked incidentally. The `smtoffset` is an offset
into the `smtname, smtid` pair (here `"", idcounter`) which corresponds
to the smt bitvector `stringf("%s#%d", get_id(module), idcounter)` which
contains all the chunks this loop is iterating over.
Thus using an incrementing `smtoffset` (like the `$ff`/`$dff` case above
already does) should be the correct fix.
Wires weren't being assigned an smtoffset value so when generating a yosys witness trace it would also use an offset of 0.
Not sure if this has any other effects, but it fixes the bug I was having.
@jix could you take a look at this?
The output width for the boolean value should not influence the
operation width. The previous incorrect width extension would still
produce correct results, but could produce invalid smt2 output for
reduction operators when the output width was larger than the width of
the vector to which the reduction was applied.
This fixes#3654
This is not valid when the prefix of a trace already violates
assertions. This can happen when the trace generating solver doesn't
look for a minimal length counterexample.
I have added an optional flag to smtbmc that causes failed temporal induction counterexample traces to be checked for duplicate states and reported to the user, since loops in the counterexample mean that increasing the induction depth won't help prove a design's safety properties.
The witness metadata was missing fine grained FFs completely and for
coarse grained FFs where the output connection has multiple chunks it
lacked the offset of the chunk within the SMT expression. This fixes
both, the later by adding an "smtoffset" field to the metadata.
George Rennie
Jannis Harder
Claire Xen
N. Engelhardt
Miodrag Milanović
Charlotte
Charlotte
Krystine Sherwin
Catherine
Emil J