Merge remote-tracking branch 'origin/eddie/peepopt_dffmuxext' into xc7dsp

frontends/aiger/aigerparse.cc

@@ -985,7 +985,7 @@ void AigerReader::post_process()
 	// operate (and run checks on) this one module
 	RTLIL::Design *mapped_design = new RTLIL::Design;
 	mapped_design->add(module);
-	Pass::call(mapped_design, "clean -purge");
+	Pass::call(mapped_design, "clean");
 	mapped_design->modules_.erase(module->name);
 	delete mapped_design;
 

passes/pmgen/peepopt_dffmuxext.pmg

@@ -22,9 +22,6 @@ endmatch
 code
 	did_something = true;
 
-	log_cell(dff);
-	log_cell(mux);
-
 	SigSpec &D = mux->connections_.at(muxAB);
 	SigSpec &Q = dff->connections_.at(\Q);
 	int width = GetSize(D);

tests/simple/peepopt.v

@@ -1,21 +0,0 @@
-module peepopt_shiftmul_0 #(parameter N=3, parameter W=3) (input [N*W-1:0] i, input [$clog2(N)-1:0] s, output [W-1:0] o);
-assign o = i[s*W+:W];
-endmodule
-
-module peepopt_shiftmul_1 (output y, input [2:0] w);
-assign y = 1'b1 >> (w * (3'b110));
-endmodule
-
-module peepopt_muldiv_0(input [1:0] i, output [1:0] o);
-wire [3:0] t;
-assign t = i * 3;
-assign o = t / 3;
-endmodule
-
-module peepopt_dffmuxext_signed(input clk, ce, input signed [1:0] i, output reg signed [3:0] o);
-    always @(posedge clk) if (ce) o <= i;
-endmodule
-
-module peepopt_dffmuxext_unsigned(input clk, ce, input [1:0] i, output reg [3:0] o);
-    always @(posedge clk) if (ce) o <= i;
-endmodule

tests/various/peepopt.ys

@@ -0,0 +1,63 @@
+read_verilog <<EOT
+module peepopt_shiftmul_0 #(parameter N=3, parameter W=3) (input [N*W-1:0] i, input [$clog2(N)-1:0] s, output [W-1:0] o);
+assign o = i[s*W+:W];
+endmodule
+EOT
+
+prep -nokeepdc
+equiv_opt peepopt
+design -load postopt
+clean
+select -assert-count 1 t:$shiftx
+select -assert-count 0 t:$shiftx t:* %D
+
+####################
+
+design -reset
+read_verilog <<EOT
+module peepopt_shiftmul_1 (output [7:0] y, input [2:0] w);
+assign y = 1'b1 >> (w * (3'b110));
+endmodule
+EOT
+
+prep -nokeepdc
+equiv_opt peepopt
+design -load postopt
+clean
+select -assert-count 1 t:$shr
+select -assert-count 1 t:$mul
+select -assert-count 0 t:$shr t:$mul %% t:* %D
+
+####################
+
+design -reset
+read_verilog <<EOT
+module peepopt_muldiv_0(input [1:0] i, output [1:0] o);
+wire [3:0] t;
+assign t = i * 3;
+assign o = t / 3;
+endmodule
+EOT
+
+prep -nokeepdc
+equiv_opt peepopt
+design -load postopt
+clean
+select -assert-count 0 t:*
+
+####################
+
+design -reset
+read_verilog <<EOT
+module peepopt_dffmuxext_signed(input clk, ce, input signed [1:0] i, output reg signed [3:0] o);
+    always @(posedge clk) if (ce) o <= i;
+endmodule
+EOT
+
+prep -nokeepdc
+equiv_opt peepopt
+design -load postopt
+clean
+select -assert-count 1 t:$dff r:WIDTH=2 %i
+select -assert-count 1 t:$mux r:WIDTH=2 %i
+select -assert-count 0 t:$dff t:$mux %% t:* %D