riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge pull request #405 from azonenberg/gpak-refactoring 

Gpak refactoring
This commit is contained in:
Clifford Wolf 2017-09-02 13:43:36 +02:00 committed by GitHub
parent 18609f3df8 40021d2fd8
commit 3331c281db
5 changed files with 157 additions and 137 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
techlibs/greenpak4/Makefile.inc
View File

@ -2,9 +2,11 @@
OBJS += techlibs/greenpak4/synth_greenpak4.o OBJS += techlibs/greenpak4/synth_greenpak4.o
OBJS += techlibs/greenpak4/greenpak4_dffinv.o OBJS += techlibs/greenpak4/greenpak4_dffinv.o
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_blackbox.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_latch.v)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_latch.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_map.v)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_map.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim.v)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim_ams.v)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim_ams.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim_digital.v)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim_digital.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/cells_sim_wip.v))
$(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/gp_dff.lib)) $(eval $(call add_share_file,share/greenpak4,techlibs/greenpak4/gp_dff.lib))

17
techlibs/greenpak4/cells_blackbox.v Normal file
View File

@ -0,0 +1,17 @@
module \$__COUNT_ (CE, CLK, OUT, POUT, RST, UP);
input wire CE;
input wire CLK;
output reg OUT;
output reg[WIDTH-1:0] POUT;
input wire RST;
input wire UP;
parameter COUNT_TO = 1;
parameter RESET_MODE = "RISING";
parameter HAS_POUT = 0;
parameter HAS_CE = 0;
parameter WIDTH = 8;
parameter DIRECTION = "DOWN";
endmodule

137
techlibs/greenpak4/cells_sim.v
View File

@ -2,139 +2,4 @@
`include "cells_sim_ams.v" `include "cells_sim_ams.v"
`include "cells_sim_digital.v" `include "cells_sim_digital.v"
`include "cells_sim_wip.v"
//Cells still in this file have INCOMPLETE simulation models, need to finish them
module GP_DCMP(input[7:0] INP, input[7:0] INN, input CLK, input PWRDN, output reg GREATER, output reg EQUAL);
parameter PWRDN_SYNC = 1'b0;
parameter CLK_EDGE = "RISING";
parameter GREATER_OR_EQUAL = 1'b0;
//TODO implement power-down mode
initial GREATER = 0;
initial EQUAL = 0;
wire clk_minv = (CLK_EDGE == "RISING") ? CLK : ~CLK;
always @(posedge clk_minv) begin
if(GREATER_OR_EQUAL)
GREATER <= (INP >= INN);
else
GREATER <= (INP > INN);
EQUAL <= (INP == INN);
end
endmodule
module GP_EDGEDET(input IN, output reg OUT);
parameter EDGE_DIRECTION = "RISING";
parameter DELAY_STEPS = 1;
parameter GLITCH_FILTER = 0;
//not implemented for simulation
endmodule
module GP_RCOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
parameter OSC_FREQ = "25k";
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
CLKOUT_FABRIC = 0;
end
else begin
if(OSC_FREQ == "25k") begin
//half period of 25 kHz
#20000;
end
else begin
//half period of 2 MHz
#250;
end
CLKOUT_HARDIP = ~CLKOUT_HARDIP;
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_RINGOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
CLKOUT_FABRIC = 0;
end
else begin
//half period of 27 MHz
#18.518;
CLKOUT_HARDIP = ~CLKOUT_HARDIP;
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_SPI(
input SCK,
inout SDAT,
input CSN,
input[7:0] TXD_HIGH,
input[7:0] TXD_LOW,
output reg[7:0] RXD_HIGH,
output reg[7:0] RXD_LOW,
output reg INT);
initial RXD_HIGH = 0;
initial RXD_LOW = 0;
initial INT = 0;
parameter DATA_WIDTH = 8; //byte or word width
parameter SPI_CPHA = 0; //SPI clock phase
parameter SPI_CPOL = 0; //SPI clock polarity
parameter DIRECTION = "INPUT"; //SPI data direction (either input to chip or output to host)
//parallel output to fabric not yet implemented
//TODO: write sim model
//TODO: SPI SDIO control... can we use ADC output while SPI is input??
//TODO: clock sync
endmodule
//keep constraint needed to prevent optimization since we have no outputs
(* keep *)
module GP_SYSRESET(input RST);
parameter RESET_MODE = "EDGE";
parameter EDGE_SPEED = 4;
//cannot simulate whole system reset
endmodule

2
techlibs/greenpak4/cells_sim_digital.v
View File

@ -102,7 +102,7 @@ module GP_COUNT14(input CLK, input wire RST, output reg OUT);
default: begin default: begin
initial begin initial begin
$display("Invalid RESET_MODE on GP_COUNT8"); $display("Invalid RESET_MODE on GP_COUNT14");
$finish; $finish;
end end
end end

136
techlibs/greenpak4/cells_sim_wip.v Normal file
View File

@ -0,0 +1,136 @@
//Cells still in this file have INCOMPLETE simulation models, need to finish them
module GP_DCMP(input[7:0] INP, input[7:0] INN, input CLK, input PWRDN, output reg GREATER, output reg EQUAL);
parameter PWRDN_SYNC = 1'b0;
parameter CLK_EDGE = "RISING";
parameter GREATER_OR_EQUAL = 1'b0;
//TODO implement power-down mode
initial GREATER = 0;
initial EQUAL = 0;
wire clk_minv = (CLK_EDGE == "RISING") ? CLK : ~CLK;
always @(posedge clk_minv) begin
if(GREATER_OR_EQUAL)
GREATER <= (INP >= INN);
else
GREATER <= (INP > INN);
EQUAL <= (INP == INN);
end
endmodule
module GP_EDGEDET(input IN, output reg OUT);
parameter EDGE_DIRECTION = "RISING";
parameter DELAY_STEPS = 1;
parameter GLITCH_FILTER = 0;
//not implemented for simulation
endmodule
module GP_RCOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
parameter OSC_FREQ = "25k";
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
CLKOUT_FABRIC = 0;
end
else begin
if(OSC_FREQ == "25k") begin
//half period of 25 kHz
#20000;
end
else begin
//half period of 2 MHz
#250;
end
CLKOUT_HARDIP = ~CLKOUT_HARDIP;
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_RINGOSC(input PWRDN, output reg CLKOUT_HARDIP, output reg CLKOUT_FABRIC);
parameter PWRDN_EN = 0;
parameter AUTO_PWRDN = 0;
parameter HARDIP_DIV = 1;
parameter FABRIC_DIV = 1;
initial CLKOUT_HARDIP = 0;
initial CLKOUT_FABRIC = 0;
//output dividers not implemented for simulation
//auto powerdown not implemented for simulation
always begin
if(PWRDN) begin
CLKOUT_HARDIP = 0;
CLKOUT_FABRIC = 0;
end
else begin
//half period of 27 MHz
#18.518;
CLKOUT_HARDIP = ~CLKOUT_HARDIP;
CLKOUT_FABRIC = ~CLKOUT_FABRIC;
end
end
endmodule
module GP_SPI(
input SCK,
inout SDAT,
input CSN,
input[7:0] TXD_HIGH,
input[7:0] TXD_LOW,
output reg[7:0] RXD_HIGH,
output reg[7:0] RXD_LOW,
output reg INT);
initial RXD_HIGH = 0;
initial RXD_LOW = 0;
initial INT = 0;
parameter DATA_WIDTH = 8; //byte or word width
parameter SPI_CPHA = 0; //SPI clock phase
parameter SPI_CPOL = 0; //SPI clock polarity
parameter DIRECTION = "INPUT"; //SPI data direction (either input to chip or output to host)
//parallel output to fabric not yet implemented
//TODO: write sim model
//TODO: SPI SDIO control... can we use ADC output while SPI is input??
//TODO: clock sync
endmodule
//keep constraint needed to prevent optimization since we have no outputs
(* keep *)
module GP_SYSRESET(input RST);
parameter RESET_MODE = "EDGE";
parameter EDGE_SPEED = 4;
//cannot simulate whole system reset
endmodule