riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
yosys/tests/arch/ice40/memories.ys

139 lines
5.1 KiB
Plaintext
Raw Normal View History

ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
# ================================ RAM ================================
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
# RAM bits <= 4K; Data width <= 16; Address width <= 11: -> SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 11 -set DATA_WIDTH 2 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 10 -set DATA_WIDTH 4 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 8 -set DATA_WIDTH 16 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
## With parameters
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:SB_RAM40_4K # too inefficient
select -assert-min 1 t:SB_DFFE
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set syn_ramstyle "block_ram" m:memory
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: match memory inference attribute values case insensitive. LSE/Synplify use case insensitive matching.
2020-01-01 01:20:06 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: match memory inference attribute values case insensitive. LSE/Synplify use case insensitive matching.
2020-01-01 01:20:06 -06:00
setattr -set syn_ramstyle "Block_RAM" m:memory
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K # any case works
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set ram_block 1 m:memory
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
setattr -set syn_ramstyle "registers" m:memory
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:SB_RAM40_4K # requested FFRAM explicitly
select -assert-min 1 t:SB_DFFE
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockram.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_ram_sdp
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_ram_sdp
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set logic_block 1 m:memory
synth_ice40 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:SB_RAM40_4K # requested FFRAM explicitly
select -assert-min 1 t:SB_DFFE
ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
# ================================ ROM ================================
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
# ROM bits <= 4K; Data width <= 16; Address width <= 11: -> SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 11 -set DATA_WIDTH 2 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 10 -set DATA_WIDTH 4 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 8 -set DATA_WIDTH 16 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
## With parameters
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 0 t:SB_RAM40_4K # too inefficient
select -assert-min 1 t:SB_LUT4
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set syn_romstyle "ebr" m:memory
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set rom_block 1 m:memory
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 1 t:SB_RAM40_4K
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ecp5: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 02:27:47 -06:00
setattr -set syn_romstyle "logic" m:memory
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 0 t:SB_RAM40_4K # requested LUTROM explicitly
select -assert-min 1 t:SB_LUT4
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
design -reset; read_verilog -defer ../common/blockrom.v
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 8 sync_rom
test/arch/{ecp5,ice40}/memories.ys: Use read_verilog -defer. These parts keep rereading a Verilog module, then using chparam to test it with various parameter combinations. Since the default parameters are on the large side, this spends a lot of time needlessly elaborating the default parametrization that will then be discarded. Fix it with -deref and manual hierarchy call. Shaves 30s off the test time on my machine.
2021-08-11 07:14:45 -05:00
hierarchy -top sync_rom
ice40: add support for both 1364.1 and LSE RAM/ROM attributes. This commit tries to carefully follow the documented behavior of LSE and Synplify. It will use `syn_ramstyle` attribute if there are any write ports, and `syn_romstyle` attribute otherwise. * LSE supports both `syn_ramstyle` and `syn_romstyle`. * Synplify only supports `syn_ramstyle`, with same values as LSE. * Synplify also supports `syn_rw_conflict_logic`, which is not documented as supported for LSE. Limitations of the Yosys implementation: * LSE/Synplify appear to interpret attribute values insensitive to case. There is currently no way to do this in Yosys (attrmap can only change case of attribute names). * LSE/Synplify support `syn_ramstyle="block_ram,no_rw_check"` syntax to turn off insertion of transparency logic. There is currently no way to support multiple valued attributes in memory_bram. It is also not clear if that is a good idea, since it can cause sim/synth mismatches. * LSE/Synplify/1364.1 support block ROM inference from full case statements. Yosys does not currently perform this transformation. * LSE/Synplify propagate `syn_ramstyle`/`syn_romstyle` attributes from the module to the inner memories. There is currently no way to do this in Yosys (attrmvcp only works on cells and wires).
2020-01-01 00:18:53 -06:00
setattr -set logic_block 1 m:memory
synth_ice40 -top sync_rom; cd sync_rom
select -assert-count 0 t:SB_RAM40_4K # requested LUTROM explicitly
select -assert-min 1 t:SB_LUT4