yosys/techlibs/intel/common/altpll_bb.v

367 lines
14 KiB
Coq
Raw Normal View History

/*
* yosys -- Yosys Open SYnthesis Suite
*
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/* No clearbox model */
`ifdef NO_CLEARBOX
(* blackbox *)
module altpll
( inclk,
fbin,
pllena,
clkswitch,
areset,
pfdena,
clkena,
extclkena,
scanclk,
scanaclr,
scanclkena,
scanread,
scanwrite,
scandata,
phasecounterselect,
phaseupdown,
phasestep,
configupdate,
fbmimicbidir,
clk,
extclk,
clkbad,
enable0,
enable1,
activeclock,
clkloss,
locked,
scandataout,
scandone,
sclkout0,
sclkout1,
phasedone,
vcooverrange,
vcounderrange,
fbout,
fref,
icdrclk,
c0,
c1,
c2,
c3,
c4);
parameter intended_device_family = "MAX 10";
parameter operation_mode = "NORMAL";
parameter pll_type = "AUTO";
parameter qualify_conf_done = "OFF";
parameter compensate_clock = "CLK0";
parameter scan_chain = "LONG";
parameter primary_clock = "inclk0";
parameter inclk0_input_frequency = 1000;
parameter inclk1_input_frequency = 0;
parameter gate_lock_signal = "NO";
parameter gate_lock_counter = 0;
parameter lock_high = 1;
parameter lock_low = 0;
parameter valid_lock_multiplier = 1;
parameter invalid_lock_multiplier = 5;
parameter switch_over_type = "AUTO";
parameter switch_over_on_lossclk = "OFF" ;
parameter switch_over_on_gated_lock = "OFF" ;
parameter enable_switch_over_counter = "OFF";
parameter switch_over_counter = 0;
parameter feedback_source = "EXTCLK0" ;
parameter bandwidth = 0;
parameter bandwidth_type = "UNUSED";
parameter lpm_hint = "UNUSED";
parameter spread_frequency = 0;
parameter down_spread = "0.0";
parameter self_reset_on_gated_loss_lock = "OFF";
parameter self_reset_on_loss_lock = "OFF";
parameter lock_window_ui = "0.05";
parameter width_clock = 6;
parameter width_phasecounterselect = 4;
parameter charge_pump_current_bits = 9999;
parameter loop_filter_c_bits = 9999;
parameter loop_filter_r_bits = 9999;
parameter scan_chain_mif_file = "UNUSED";
parameter clk9_multiply_by = 1;
parameter clk8_multiply_by = 1;
parameter clk7_multiply_by = 1;
parameter clk6_multiply_by = 1;
parameter clk5_multiply_by = 1;
parameter clk4_multiply_by = 1;
parameter clk3_multiply_by = 1;
parameter clk2_multiply_by = 1;
parameter clk1_multiply_by = 1;
parameter clk0_multiply_by = 1;
parameter clk9_divide_by = 1;
parameter clk8_divide_by = 1;
parameter clk7_divide_by = 1;
parameter clk6_divide_by = 1;
parameter clk5_divide_by = 1;
parameter clk4_divide_by = 1;
parameter clk3_divide_by = 1;
parameter clk2_divide_by = 1;
parameter clk1_divide_by = 1;
parameter clk0_divide_by = 1;
parameter clk9_phase_shift = "0";
parameter clk8_phase_shift = "0";
parameter clk7_phase_shift = "0";
parameter clk6_phase_shift = "0";
parameter clk5_phase_shift = "0";
parameter clk4_phase_shift = "0";
parameter clk3_phase_shift = "0";
parameter clk2_phase_shift = "0";
parameter clk1_phase_shift = "0";
parameter clk0_phase_shift = "0";
parameter clk9_duty_cycle = 50;
parameter clk8_duty_cycle = 50;
parameter clk7_duty_cycle = 50;
parameter clk6_duty_cycle = 50;
parameter clk5_duty_cycle = 50;
parameter clk4_duty_cycle = 50;
parameter clk3_duty_cycle = 50;
parameter clk2_duty_cycle = 50;
parameter clk1_duty_cycle = 50;
parameter clk0_duty_cycle = 50;
parameter clk9_use_even_counter_mode = "OFF";
parameter clk8_use_even_counter_mode = "OFF";
parameter clk7_use_even_counter_mode = "OFF";
parameter clk6_use_even_counter_mode = "OFF";
parameter clk5_use_even_counter_mode = "OFF";
parameter clk4_use_even_counter_mode = "OFF";
parameter clk3_use_even_counter_mode = "OFF";
parameter clk2_use_even_counter_mode = "OFF";
parameter clk1_use_even_counter_mode = "OFF";
parameter clk0_use_even_counter_mode = "OFF";
parameter clk9_use_even_counter_value = "OFF";
parameter clk8_use_even_counter_value = "OFF";
parameter clk7_use_even_counter_value = "OFF";
parameter clk6_use_even_counter_value = "OFF";
parameter clk5_use_even_counter_value = "OFF";
parameter clk4_use_even_counter_value = "OFF";
parameter clk3_use_even_counter_value = "OFF";
parameter clk2_use_even_counter_value = "OFF";
parameter clk1_use_even_counter_value = "OFF";
parameter clk0_use_even_counter_value = "OFF";
parameter clk2_output_frequency = 0;
parameter clk1_output_frequency = 0;
parameter clk0_output_frequency = 0;
parameter vco_min = 0;
parameter vco_max = 0;
parameter vco_center = 0;
parameter pfd_min = 0;
parameter pfd_max = 0;
parameter m_initial = 1;
parameter m = 0;
parameter n = 1;
parameter m2 = 1;
parameter n2 = 1;
parameter ss = 0;
parameter l0_high = 1;
parameter l1_high = 1;
parameter g0_high = 1;
parameter g1_high = 1;
parameter g2_high = 1;
parameter g3_high = 1;
parameter e0_high = 1;
parameter e1_high = 1;
parameter e2_high = 1;
parameter e3_high = 1;
parameter l0_low = 1;
parameter l1_low = 1;
parameter g0_low = 1;
parameter g1_low = 1;
parameter g2_low = 1;
parameter g3_low = 1;
parameter e0_low = 1;
parameter e1_low = 1;
parameter e2_low = 1;
parameter e3_low = 1;
parameter l0_initial = 1;
parameter l1_initial = 1;
parameter g0_initial = 1;
parameter g1_initial = 1;
parameter g2_initial = 1;
parameter g3_initial = 1;
parameter e0_initial = 1;
parameter e1_initial = 1;
parameter e2_initial = 1;
parameter e3_initial = 1;
parameter l0_mode = "bypass";
parameter l1_mode = "bypass";
parameter g0_mode = "bypass";
parameter g1_mode = "bypass";
parameter g2_mode = "bypass";
parameter g3_mode = "bypass";
parameter e0_mode = "bypass";
parameter e1_mode = "bypass";
parameter e2_mode = "bypass";
parameter e3_mode = "bypass";
parameter l0_ph = 0;
parameter l1_ph = 0;
parameter g0_ph = 0;
parameter g1_ph = 0;
parameter g2_ph = 0;
parameter g3_ph = 0;
parameter e0_ph = 0;
parameter e1_ph = 0;
parameter e2_ph = 0;
parameter e3_ph = 0;
parameter m_ph = 0;
parameter l0_time_delay = 0;
parameter l1_time_delay = 0;
parameter g0_time_delay = 0;
parameter g1_time_delay = 0;
parameter g2_time_delay = 0;
parameter g3_time_delay = 0;
parameter e0_time_delay = 0;
parameter e1_time_delay = 0;
parameter e2_time_delay = 0;
parameter e3_time_delay = 0;
parameter m_time_delay = 0;
parameter n_time_delay = 0;
parameter extclk3_counter = "e3" ;
parameter extclk2_counter = "e2" ;
parameter extclk1_counter = "e1" ;
parameter extclk0_counter = "e0" ;
parameter clk9_counter = "c9" ;
parameter clk8_counter = "c8" ;
parameter clk7_counter = "c7" ;
parameter clk6_counter = "c6" ;
parameter clk5_counter = "l1" ;
parameter clk4_counter = "l0" ;
parameter clk3_counter = "g3" ;
parameter clk2_counter = "g2" ;
parameter clk1_counter = "g1" ;
parameter clk0_counter = "g0" ;
parameter enable0_counter = "l0";
parameter enable1_counter = "l0";
parameter charge_pump_current = 2;
parameter loop_filter_r = "1.0";
parameter loop_filter_c = 5;
parameter vco_post_scale = 0;
parameter vco_frequency_control = "AUTO";
parameter vco_phase_shift_step = 0;
parameter lpm_type = "altpll";
parameter port_clkena0 = "PORT_CONNECTIVITY";
parameter port_clkena1 = "PORT_CONNECTIVITY";
parameter port_clkena2 = "PORT_CONNECTIVITY";
parameter port_clkena3 = "PORT_CONNECTIVITY";
parameter port_clkena4 = "PORT_CONNECTIVITY";
parameter port_clkena5 = "PORT_CONNECTIVITY";
parameter port_extclkena0 = "PORT_CONNECTIVITY";
parameter port_extclkena1 = "PORT_CONNECTIVITY";
parameter port_extclkena2 = "PORT_CONNECTIVITY";
parameter port_extclkena3 = "PORT_CONNECTIVITY";
parameter port_extclk0 = "PORT_CONNECTIVITY";
parameter port_extclk1 = "PORT_CONNECTIVITY";
parameter port_extclk2 = "PORT_CONNECTIVITY";
parameter port_extclk3 = "PORT_CONNECTIVITY";
parameter port_clk0 = "PORT_CONNECTIVITY";
parameter port_clk1 = "PORT_CONNECTIVITY";
parameter port_clk2 = "PORT_CONNECTIVITY";
parameter port_clk3 = "PORT_CONNECTIVITY";
parameter port_clk4 = "PORT_CONNECTIVITY";
parameter port_clk5 = "PORT_CONNECTIVITY";
parameter port_clk6 = "PORT_CONNECTIVITY";
parameter port_clk7 = "PORT_CONNECTIVITY";
parameter port_clk8 = "PORT_CONNECTIVITY";
parameter port_clk9 = "PORT_CONNECTIVITY";
parameter port_scandata = "PORT_CONNECTIVITY";
parameter port_scandataout = "PORT_CONNECTIVITY";
parameter port_scandone = "PORT_CONNECTIVITY";
parameter port_sclkout1 = "PORT_CONNECTIVITY";
parameter port_sclkout0 = "PORT_CONNECTIVITY";
parameter port_clkbad0 = "PORT_CONNECTIVITY";
parameter port_clkbad1 = "PORT_CONNECTIVITY";
parameter port_activeclock = "PORT_CONNECTIVITY";
parameter port_clkloss = "PORT_CONNECTIVITY";
parameter port_inclk1 = "PORT_CONNECTIVITY";
parameter port_inclk0 = "PORT_CONNECTIVITY";
parameter port_fbin = "PORT_CONNECTIVITY";
parameter port_fbout = "PORT_CONNECTIVITY";
parameter port_pllena = "PORT_CONNECTIVITY";
parameter port_clkswitch = "PORT_CONNECTIVITY";
parameter port_areset = "PORT_CONNECTIVITY";
parameter port_pfdena = "PORT_CONNECTIVITY";
parameter port_scanclk = "PORT_CONNECTIVITY";
parameter port_scanaclr = "PORT_CONNECTIVITY";
parameter port_scanread = "PORT_CONNECTIVITY";
parameter port_scanwrite = "PORT_CONNECTIVITY";
parameter port_enable0 = "PORT_CONNECTIVITY";
parameter port_enable1 = "PORT_CONNECTIVITY";
parameter port_locked = "PORT_CONNECTIVITY";
parameter port_configupdate = "PORT_CONNECTIVITY";
parameter port_phasecounterselect = "PORT_CONNECTIVITY";
parameter port_phasedone = "PORT_CONNECTIVITY";
parameter port_phasestep = "PORT_CONNECTIVITY";
parameter port_phaseupdown = "PORT_CONNECTIVITY";
parameter port_vcooverrange = "PORT_CONNECTIVITY";
parameter port_vcounderrange = "PORT_CONNECTIVITY";
parameter port_scanclkena = "PORT_CONNECTIVITY";
parameter using_fbmimicbidir_port = "ON";
input [1:0] inclk;
input fbin;
input pllena;
input clkswitch;
input areset;
input pfdena;
input clkena;
input extclkena;
input scanclk;
input scanaclr;
input scanclkena;
input scanread;
input scanwrite;
input scandata;
input phasecounterselect;
input phaseupdown;
input phasestep;
input configupdate;
inout fbmimicbidir;
output [width_clock-1:0] clk;
output [3:0] extclk;
output [1:0] clkbad;
output enable0;
output enable1;
output activeclock;
output clkloss;
output locked;
output scandataout;
output scandone;
output sclkout0;
output sclkout1;
output phasedone;
output vcooverrange;
output vcounderrange;
output fbout;
output fref;
output icdrclk;
output c0, c1, c2, c3, c4;
endmodule // altpll
`endif