yosys/techlibs/xilinx/arith_map.v

203 lines
4.5 KiB
Verilog
Raw Normal View History

/*
* yosys -- Yosys Open SYnthesis Suite
*
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
2015-07-02 04:14:30 -05:00
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
2015-07-02 04:14:30 -05:00
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
// ============================================================================
// LCU
(* techmap_celltype = "$lcu" *)
module _80_xilinx_lcu (P, G, CI, CO);
parameter WIDTH = 2;
(* force_downto *)
input [WIDTH-1:0] P, G;
input CI;
(* force_downto *)
output [WIDTH-1:0] CO;
wire _TECHMAP_FAIL_ = WIDTH <= 2;
genvar i;
generate if (`LUT_SIZE == 4) begin
(* force_downto *)
wire [WIDTH-1:0] C = {CO, CI};
(* force_downto *)
wire [WIDTH-1:0] S = P & ~G;
generate for (i = 0; i < WIDTH; i = i + 1) begin:slice
MUXCY muxcy (
.CI(C[i]),
.DI(G[i]),
.S(S[i]),
.O(CO[i])
);
end endgenerate
end else begin
localparam CARRY4_COUNT = (WIDTH + 3) / 4;
localparam MAX_WIDTH = CARRY4_COUNT * 4;
localparam PAD_WIDTH = MAX_WIDTH - WIDTH;
(* force_downto *)
wire [MAX_WIDTH-1:0] S = {{PAD_WIDTH{1'b0}}, P & ~G};
(* force_downto *)
2020-01-21 10:42:37 -06:00
wire [MAX_WIDTH-1:0] GG = {{PAD_WIDTH{1'b0}}, G};
(* force_downto *)
2020-01-21 10:42:37 -06:00
wire [MAX_WIDTH-1:0] C;
assign CO = C;
generate for (i = 0; i < CARRY4_COUNT; i = i + 1) begin:slice
2020-01-21 10:42:37 -06:00
if (i == 0) begin
CARRY4 carry4
(
.CYINIT(CI),
.CI (1'd0),
.DI (GG[i*4 +: 4]),
.S (S [i*4 +: 4]),
2020-01-21 10:42:37 -06:00
.CO (C [i*4 +: 4]),
);
end else begin
2020-01-21 10:42:37 -06:00
CARRY4 carry4
(
.CYINIT(1'd0),
.CI (C [i*4 - 1]),
.DI (GG[i*4 +: 4]),
.S (S [i*4 +: 4]),
2020-01-21 10:42:37 -06:00
.CO (C [i*4 +: 4]),
);
end
end endgenerate
end endgenerate
endmodule
// ============================================================================
// ALU
(* techmap_celltype = "$alu" *)
module _80_xilinx_alu (A, B, CI, BI, X, Y, CO);
parameter A_SIGNED = 0;
parameter B_SIGNED = 0;
parameter A_WIDTH = 1;
parameter B_WIDTH = 1;
parameter Y_WIDTH = 1;
parameter _TECHMAP_CONSTVAL_CI_ = 0;
parameter _TECHMAP_CONSTMSK_CI_ = 0;
(* force_downto *)
input [A_WIDTH-1:0] A;
(* force_downto *)
input [B_WIDTH-1:0] B;
(* force_downto *)
output [Y_WIDTH-1:0] X, Y;
input CI, BI;
(* force_downto *)
output [Y_WIDTH-1:0] CO;
wire _TECHMAP_FAIL_ = Y_WIDTH <= 2;
(* force_downto *)
wire [Y_WIDTH-1:0] A_buf, B_buf;
\$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf));
\$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf));
(* force_downto *)
wire [Y_WIDTH-1:0] AA = A_buf;
(* force_downto *)
wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf;
genvar i;
generate if (`LUT_SIZE == 4) begin
(* force_downto *)
wire [Y_WIDTH-1:0] C = {CO, CI};
(* force_downto *)
wire [Y_WIDTH-1:0] S = {AA ^ BB};
genvar i;
generate for (i = 0; i < Y_WIDTH; i = i + 1) begin:slice
MUXCY muxcy (
.CI(C[i]),
.DI(AA[i]),
.S(S[i]),
.O(CO[i])
);
XORCY xorcy (
.CI(C[i]),
.LI(S[i]),
.O(Y[i])
);
end endgenerate
verilog: significant block scoping improvements This change set contains a number of bug fixes and improvements related to scoping and resolution in generate and procedural blocks. While many of the frontend changes are interdependent, it may be possible bring the techmap changes in under a separate PR. Declarations within unnamed generate blocks previously encountered issues because the data declarations were left un-prefixed, breaking proper scoping. The LRM outlines behavior for generating names for unnamed generate blocks. The original goal was to add this implicit labelling, but doing so exposed a number of issues downstream. Additional testing highlighted other closely related scope resolution issues, which have been fixed. This change also adds support for block item declarations within unnamed blocks in SystemVerilog mode. 1. Unlabled generate blocks are now implicitly named according to the LRM in `label_genblks`, which is invoked at the beginning of module elaboration 2. The Verilog parser no longer wraps explicitly named generate blocks in a synthetic unnamed generate block to avoid creating extra hierarchy levels where they should not exist 3. The techmap phase now allows special control identifiers to be used outside of the topmost scope, which is necessary because such wires and cells often appear in unlabeled generate blocks, which now prefix the declarations within 4. Some techlibs required modifications because they relied on the previous invalid scope resolution behavior 5. `expand_genblock` has been simplified, now only expanding the outermost scope, completely deferring the inspection and elaboration of nested scopes; names are now resolved by looking in the innermost scope and stepping outward 6. Loop variables now always become localparams during unrolling, allowing them to be resolved and shadowed like any other identifier 7. Identifiers in synthetic function call scopes are now prefixed and resolved in largely the same manner as other blocks before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x` after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x` 8. Support identifiers referencing a local generate scope nested more than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`, or `A.B.C.D` 9. Variables can now be declared within unnamed blocks in SystemVerilog mode Addresses the following issues: 656, 2423, 2493
2021-01-27 12:30:22 -06:00
assign X = S;
end else begin
localparam CARRY4_COUNT = (Y_WIDTH + 3) / 4;
localparam MAX_WIDTH = CARRY4_COUNT * 4;
localparam PAD_WIDTH = MAX_WIDTH - Y_WIDTH;
(* force_downto *)
wire [MAX_WIDTH-1:0] S = {{PAD_WIDTH{1'b0}}, AA ^ BB};
(* force_downto *)
wire [MAX_WIDTH-1:0] DI = {{PAD_WIDTH{1'b0}}, AA};
(* force_downto *)
2020-01-21 10:42:37 -06:00
wire [MAX_WIDTH-1:0] O;
(* force_downto *)
2020-01-21 10:42:37 -06:00
wire [MAX_WIDTH-1:0] C;
assign Y = O, CO = C;
genvar i;
generate for (i = 0; i < CARRY4_COUNT; i = i + 1) begin:slice
2020-01-21 10:42:37 -06:00
if (i == 0) begin
CARRY4 carry4
(
.CYINIT(CI),
.CI (1'd0),
.DI (DI[i*4 +: 4]),
.S (S [i*4 +: 4]),
.O (O [i*4 +: 4]),
.CO (C [i*4 +: 4])
);
end else begin
2020-01-21 10:42:37 -06:00
CARRY4 carry4
(
.CYINIT(1'd0),
.CI (C [i*4 - 1]),
.DI (DI[i*4 +: 4]),
.S (S [i*4 +: 4]),
.O (O [i*4 +: 4]),
.CO (C [i*4 +: 4])
);
end
end endgenerate
assign X = S;
verilog: significant block scoping improvements This change set contains a number of bug fixes and improvements related to scoping and resolution in generate and procedural blocks. While many of the frontend changes are interdependent, it may be possible bring the techmap changes in under a separate PR. Declarations within unnamed generate blocks previously encountered issues because the data declarations were left un-prefixed, breaking proper scoping. The LRM outlines behavior for generating names for unnamed generate blocks. The original goal was to add this implicit labelling, but doing so exposed a number of issues downstream. Additional testing highlighted other closely related scope resolution issues, which have been fixed. This change also adds support for block item declarations within unnamed blocks in SystemVerilog mode. 1. Unlabled generate blocks are now implicitly named according to the LRM in `label_genblks`, which is invoked at the beginning of module elaboration 2. The Verilog parser no longer wraps explicitly named generate blocks in a synthetic unnamed generate block to avoid creating extra hierarchy levels where they should not exist 3. The techmap phase now allows special control identifiers to be used outside of the topmost scope, which is necessary because such wires and cells often appear in unlabeled generate blocks, which now prefix the declarations within 4. Some techlibs required modifications because they relied on the previous invalid scope resolution behavior 5. `expand_genblock` has been simplified, now only expanding the outermost scope, completely deferring the inspection and elaboration of nested scopes; names are now resolved by looking in the innermost scope and stepping outward 6. Loop variables now always become localparams during unrolling, allowing them to be resolved and shadowed like any other identifier 7. Identifiers in synthetic function call scopes are now prefixed and resolved in largely the same manner as other blocks before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x` after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x` 8. Support identifiers referencing a local generate scope nested more than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`, or `A.B.C.D` 9. Variables can now be declared within unnamed blocks in SystemVerilog mode Addresses the following issues: 656, 2423, 2493
2021-01-27 12:30:22 -06:00
end endgenerate
endmodule