mirror of https://github.com/YosysHQ/yosys.git
60 lines
2.0 KiB
Plaintext
60 lines
2.0 KiB
Plaintext
|
pattern formal_clockgateff
|
||
|
|
|
||
|
|
// Detects the most common clock gating pattern using a latch and replaces it
|
||
|
|
// with a functionally equivalent pattern based on a flip-flop. The latch
|
||
|
|
// based pattern has a combinational path from the enable input to output after
|
||
|
|
// clk2fflogic, but this is a stable loop and the flip-flop based pattern does
|
||
|
|
// not exhibit this.
|
||
|
|
//
|
||
|
|
// This optimization is suitable for formal to prevent false comb loops, but
|
||
|
|
// should not be used for synthesis where the latch is an intentional choice
|
||
|
|
//
|
||
|
|
// Latch style:
|
||
|
|
// always @* if (!clk_i) latched_en = en;
|
||
|
|
// assign gated_clk_o = latched_en & clk_i;
|
||
|
|
//
|
||
|
|
// Flip-flop style:
|
||
|
|
// always @(posedge clk) flopped_en <= en;
|
||
|
|
// assign gated_clk_o = flopped_en & clk_i;
|
||
|
|
|
||
|
|
state <SigSpec> clk en latched_en gated_clk
|
||
|
|
state <IdString> latched_en_port_name
|
||
|
|
|
||
|
|
match latch
|
||
|
|
select latch->type == $dlatch
|
||
|
|
select param(latch, \WIDTH) == 1
|
||
|
|
select param(latch, \EN_POLARITY).as_bool() == false
|
||
|
|
set clk port(latch, \EN)
|
||
|
|
set en port(latch, \D)
|
||
|
|
set latched_en port(latch, \Q)
|
||
|
|
endmatch
|
||
|
|
|
||
|
|
match and_gate
|
||
|
|
select and_gate->type.in($and, $logic_and)
|
||
|
|
select param(and_gate, \A_WIDTH) == 1
|
||
|
|
select param(and_gate, \B_WIDTH) == 1
|
||
|
|
select param(and_gate, \Y_WIDTH) == 1
|
||
|
|
choice <IdString> clk_port {\A, \B}
|
||
|
|
define <IdString> latch_port {clk_port == \A ? \B : \A}
|
||
|
|
index <SigSpec> port(and_gate, clk_port) === clk
|
||
|
|
index <SigSpec> port(and_gate, latch_port) === latched_en
|
||
|
|
set gated_clk port(and_gate, \Y)
|
||
|
|
set latched_en_port_name latch_port
|
||
|
|
endmatch
|
||
|
|
|
||
|
|
code
|
||
|
|
log("replacing clock gate pattern in %s with ff: latch=%s, and=%s\n",
|
||
|
|
log_id(module), log_id(latch), log_id(and_gate));
|
||
|
|
|
||
|
|
// Add a flip-flop and rewire the AND gate to use the output of this flop
|
||
|
|
// instead of the latch. We don't delete the latch in case its output is
|
||
|
|
// used to drive other nodes. If it isn't, it will be trivially removed by
|
||
|
|
// clean
|
||
|
|
SigSpec flopped_en = module->addWire(NEW_ID);
|
||
|
|
module->addDff(NEW_ID, clk, en, flopped_en, true, latch->get_src_attribute());
|
||
|
|
and_gate->setPort(latched_en_port_name, flopped_en);
|
||
|
|
did_something = true;
|
||
|
|
|
||
|
|
accept;
|
||
|
|
endcode
|