1.9 KiB
1.9 KiB
| 1 | Name | Description | Flags | Value |
|---|---|---|---|---|
| 2 | (m2.-) | Algorithm should flag errors, for met2, if ANY of the following is true:\nAn entire 700x700 window is covered by cmm2 waffleDrop, and metX PD < 70% for same window.\n80-100% of 700x700 window is covered by cmm2 waffleDrop, and metX PD < 65% for same window.\n60-80% of 700x700 window is covered by cmm2 waffleDrop, and metX PD < 60% for same window.\n50-60% of 700x700 window is covered by cmm2 waffleDrop, and metX PD < 50% for same window.\n40-50% of 700x700 window is covered by cmm2 waffleDrop, and metX PD < 40% for same window.\n30-40% of 700x700 window is covered by cmm2 waffleDrop, and metX PD < 30% for same window.\nExclude cells whose area is below 40Kum2. Required for IP, Recommended for Chip-level. | RC | |
| 3 | (m2.1) | Width of metal 2 | 0.140 | |
| 4 | (m2.2) | Spacing of metal 2 to metal 2 | 0.140 | |
| 5 | (m2.3a) | Min. spacing of features attached to or extending from huge_met2 for a distance of up to 0.280 um to metal2 (rule not checked over non-huge met2 features) | 0.280 | |
| 6 | (m2.3b) | Min. spacing of huge_met2 to metal2 excluding features checked by m2.3a | 0.280 | |
| 7 | (m2.3c) | Min spacing between floating_met2 with AR_met2_A >= 0.05 and AR_met2_B =< 0.032, outside areaid:sc must be greater than | RR | 0.145 |
| 8 | (m2.4) | Via must be enclosed by Met2 by at least … | P AL | 0.055 |
| 9 | (m2.5) | Via must be enclosed by Met2 on one of two adjacent sides by at least … | AL | 0.085 |
| 10 | (m2.6) | Min metal2 area [um2] | 0.0676 | |
| 11 | (m2.7) | Min area of metal2 holes [um2] | 0.140 | |
| 12 | (m2.pd.1) | Min MM2_oxide_Pattern_density | RR | 0.7 |
| 13 | (m2.pd.2a) | Rule m2.pd.1 has to be checked by dividing the chip into square regions of width and length equal to … | A | 700 |
| 14 | (m2.pd.2b) | Rule m2.pd.1 has to be checked by dividing the chip into steps of … | A | 70 |
| 15 | (m2.11) | Max width of metal2 | CU | 4.000 |
| 16 | (m2.12) | Add slots and remove vias and contacts if met2 wider than….. | CU | 3.200 |
| 17 | (m2.13) | Max pattern density (PD) of metal2 | CU | 0.77 |
| 18 | (m2.14) | Met2 PD window size | CU | 50.000 |
| 19 | (m2.14a) | Met2 PD window step | CU | 25.000 |