928 B
928 B
| 1 | Name | Description | Flags | Value | Unit |
|---|---|---|---|---|---|
| 2 | (pwres.1.-) | Pwell resistor has to be enclosed by the res layer | NC | ||
| 3 | (pwres.2.-) | Min/Max width of pwell resistor | 2.650 | µm | |
| 4 | (pwres.3.-) | Min length of pwell resistor | 26.500 | µm | |
| 5 | (pwres.4.-) | Max length of pwell resistor | 265.00 | µm | |
| 6 | (pwres.5.-) | Min/Max spacing of tap inside the pwell resistor to nwell | 0.220 | µm | |
| 7 | (pwres.6.-) | Min/Max width of tap inside the pwell resistor | 0.530 | µm | |
| 8 | (pwres.7a.-) | Every pwres_terminal must enclose 12 licon1 | |||
| 9 | (pwres.7b.-) | Every pwres_terminal must enclose 12 mcons if routed through metal1 | |||
| 10 | (pwres.8.-) | Diff or poly is not allowed in the pwell resistor. | |||
| 11 | (pwres.9.-) | Nwell surrounding the pwell resistor must have a full ring of contacted tap strapped with metal. | |||
| 12 | (pwres.10.-) | The res layer must abut pwres_terminal on opposite and parallel edges | |||
| 13 | (pwres.11.-) | The res layer must abut nwell on opposite and parallel edges not checked in Rule pwres.10 |