1.1 Task vs. Rules

Both as a tribute to |Makefile|, to avoid ambiguties with |DoIt| and to remember that they are task generators, the classes defined to create tasks for the design flow are called rules.

1.2 A Warning About Determinism

There is a very important execution difference from a |Makefile|. In a |Makefile| each rule command is executed in a a separated process, so information is effectively passed through files which are written then read from disk. But in |DoIt| we are running inside one |Python| process, so while using Coriolis and the |Hurricane| database, all informations stays in memory. Files are driven, but not re-read as the database will use the datas already present in memory.

This is not whitout consequences about determism. Let's look at two different scenarii.

1. We run straight from the RTL to the layout, using the rule/task sequence:

   Yosys => design.blif => blif2vst => design.vst => PnR => design.gds
   

   In this case, while design.vst is written on disk, the PnR stage will not re-read the vst file and directly access the data in memory.

2. Run in two separated steps, first we create the vst file:

   Yosys => design.blif => blif2vst => design.vst
   

   Then, we perform the PnR:

   design.vst => PnR => design.gds
   

   In this case, as the |DoIt| processess has been restarted between the two tasks, the PnR stage will read the vst file.

The determism in |Coriolis| is ensured through the unique identifiers of the objects, attributed in creation order. So between thoses two scenarii, the identifiers will change and so the algorithm results. The differences should be minor as the identifiers are used as a last ditch test to sort between two objects which cost functions are exactly equal, nevertheless, it will occur.

2.1 Locating the Various Parts

One of the most tricky part of setting up the design flow is to locate where the various components are. The script needs to be able to find:

1. Coriolis, binaries & libraries. This depends widely of your kind of installation and system. The helper script crlenv.py supplied both in |alliance-check-toolkit| and |Coriolis| may help you there. It looks in all the standard locations (that it is aware of) to try to find it.

   Note

   Usually, |Alliance| is installed in the same tree as |Coriolis|, so it's setup can be deduced from it.

2. The configurations files for the technology to be used. Here again, the designflow.technos module provides you with a set of pre-defined configurations for open sources technologie shipped with |Coriolis|. For unsupported ones, you may write your own, it should perform the whole initialization of the |Coriolis| and |Hurricane| database.

3. Optionnaly the |alliance-check-toolkit|.

2.2 Basic Example of |dodo| File

This example can be found in |alliance-check-toolkit|, under benchs/arlet6502/sky130_c4m.

from designflow.technos import setupSky130_c4m

setupSky130_c4m( checkToolkit='../../..'
               , pdkMasterTop='../../../pdkmaster/C4M.Sky130' )

DOIT_CONFIG = { 'verbosity' : 2 }

from designflow.pnr      import PnR
from designflow.yosys    import Yosys
from designflow.blif2vst import Blif2Vst
from designflow.alias    import Alias
from designflow.clean    import Clean
PnR.textMode = True

from doDesign import scriptMain

ruleYosys = Yosys   .mkRule( 'yosys', 'Arlet6502.v' )
ruleB2V   = Blif2Vst.mkRule( 'b2v'  , [ 'arlet6502.vst'
                                      , 'Arlet6502.spi' ]
                                    , [ruleYosys]
                                    , flags=0 )
rulePnR   = PnR     .mkRule( 'pnr'  , [ 'arlet6502_cts_r.gds'
                                      , 'arlet6502_cts_r.spi'
                                      , 'arlet6502_cts_r.vst' ]
                                    , [ruleB2V]
                                    , scriptMain )
ruleCgt   = PnR     .mkRule( 'cgt' )
ruleGds   = Alias   .mkRule( 'gds', [rulePnR] )
ruleClean = Clean   .mkRule()

You can run it with:

ego@home:sky130_c4m> ../../../bin/crlenv.py -- doit list
b2v          Run <blif2vst arlet6502 depends=[Arlet6502.blif]>.
cgt          Run plain CGT (no loaded design)
clean_flow   Clean all generated (targets) files.
gds          Run <Alias "gds" for "pnr">.
pnr          Run <pnr arlet6502_cts_r.gds depends=[arlet6502.vst,Arlet6502.spi]>.
yosys        Run <yosys Arlet6502.v top=Arlet6502 blackboxes=[] flattens=[]>.
ego@home:sky130_c4m> ../../../bin/crlenv.py -- doit pnr
ego@home:sky130_c4m> ../../../bin/crlenv.py -- doit clean_flow

Let's have a detailed look on the various parts of the script.

1. Choosing the technology Here, we load the predefined configuration for SkyWater 130nm. We also have to give the location of the |alliance-check-toolkit|, it may be relative or absolute.

   If you want to use another one, it up to you to configure |Coriolis| at this point by any means you see fit.

   from designflow.technos import setupSky130_c4m
   
   setupSky130_c4m( checkToolkit='../../..'
                  , pdkMasterTop='../../../pdkmaster/C4M.Sky130' )
   

2. Loading the various task/rule generators that we will use, from the designflow namespace. The rules are named from the tool they encapsulate.

   from designflow.pnr      import PnR
   from designflow.yosys    import Yosys
   from designflow.blif2vst import Blif2Vst
   from designflow.alias    import Alias
   from designflow.clean    import Clean
   PnR.textMode = True
   

3. Creating the rule set. Each rule generator as a static method mkRule() to create a new task. The three first parameters are always:

   1. The name of the task (the basename for |DoIt|).
   2. A target or list of targets, must be files or pathlib.Path objects.
   3. A dependency or list of dependencies, they can be files, pathlib.Path objects, or other tasks. We can see that the Blif2Vst rule uses directly the Yosys one (the input file will be the first target of the Yosys rule).
   4. Any extra parameters. A set of flag for Blif2Vst. The PnR rule takes an optional callable argument, any callable. In this case we import the scriptMain() function from doDesign().

   There are two more special rules:

   • Alias, to rename a rule. It this case gds is defined as an alias to PnR (because it generate the |gds| file).

   • Clean to create a rule that will remove all the generated targets.

     Note

     The clean rule is named clean_flow because |DoIt| already have a clean arguments which would shadow it.

   PnR.textMode = True
   
   from doDesign import scriptMain
   
   ruleYosys = Yosys   .mkRule( 'yosys', 'Arlet6502.v' )
   ruleB2V   = Blif2Vst.mkRule( 'b2v'  , [ 'arlet6502.vst'
                                         , 'Arlet6502.spi' ]
                                       , [ruleYosys]
                                       , flags=0 )
   rulePnR   = PnR     .mkRule( 'pnr'  , [ 'arlet6502_cts_r.gds'
                                         , 'arlet6502_cts_r.spi'
                                         , 'arlet6502_cts_r.vst' ]
                                       , [ruleB2V]
                                       , scriptMain )
   ruleCgt   = PnR     .mkRule( 'cgt' )
   ruleGds   = Alias   .mkRule( 'gds', [rulePnR] )
   ruleClean = Clean   .mkRule()
   

3.1 Alliance Legacy Tools

Support for the |Alliance| legacy tools. They are run through sub-processes. For more detailed documentation about those tools, refer to their |man| pages.

1. Asimut, |VHDL| simulator.
2. Boog, logical synthesys. Map a |VHDL| behavioral description to a standard cell library (works with boom & loon).
3. Boom, behavioral description optimizer (works with boog & loon).
4. Cougar, symbolic layout extractor.
5. Dreal, real layout (|GDS|, |CIF|) editor.
6. Druc, symbolic layout |DRC|.
7. Flatph, flatten a layout, fully or in part.
8. Genpat, pattern generator (for use with Asimut).
9. Graal, symbolic layout editor.
10. Loon, netlist optimizer for surface and/or delay (works with boom & boog).
11. Lvx, netlist comparator (Layout Versus Extracted).
12. S2R, symbolic to real translator (to |GDS| or |CIF|).
13. Vasy, Alliance |VHDL| subset translator towards standard |VHDL| or |Verilog|.

3.2 Current Tools

1. Blif2Vst, translate a |blif| netlist (|Yosys| output) into the |Alliance| netlist format |vst|. This is a |Python| script calling |Coriolis| directly integrated inside the task.
2. PnR, maybe a bit of a misnomer. This is a caller to function that the user have to write to perform the P&R as he sees fit for it's particular design.
3. Yosys, call the |Yosys| logical synthesyser. Provide an off the shelf subset of functionalities to perform classic use cases.

3.3 Utility Rules

1. Alias, create a name alias for a rule.

2. Clean, remove all the generated targets of all the rules. The name of the rule is clean_flow` to not interfer with the |DoIt| clean arguments. Files not part of any rules targets can be added to be removeds. Then, to actually remove them, add the ``--extras flag to the command line.

   ego@home:sky130_c4m> ../../../bin/crlenv.py -- doit clean_flow --extras
   

3. Copy, copy a file into the current directory.

3.4 Rule Sets

1. alliancesynth
2. pnrcheck
3. routecheck