* Change: In documentation/build.py, more PEP8 & Python 3 future compliance.
Correct copy of the tools HTML docs on my laptop, to have a full
offline copy of the doc.
* New: In documentation/contents/pages/check-toolkit, duplicate the doc
from alliance-check-toolkit README. Seems it has been inadvertently
removed at some point (?). Have to be careful to maintain in synch
with the toolkit.
* Change: <tool>/doc/*/SoC.css, use Roboto fonts when availables.
* Update: Commit the whole pre-generated docs (Doxygen, Pelican).
In the Cell/Instance hierarchy, the "terminal" and "leaf cell" concepts
where not clearly defined and partially overlapping. Now, "Terminal" is
the refer to the physical hierarchy (layout) and "TerminalNetlist" to
the logical hierarchy (netlist). The logical hierarchy can be less deep
than the physical one thanks to a Cell dedicated cell flags. Collections
related to the physical hierarchy keep their old names, the one related
to the logical hierarchy are renamed from "Leaf" to "TerminalNetlist".
The name "Leaf" was too ambiguous (leaf for *what* hierarchy).
* Change: In Hurricane::Device, set the "TerminalNetlist" flag once and
for all. No need set it in all the derived classes again.
* New: In Hurricane::MultiCapacitor, added new parameter "dummy" to
create dummies around the capacity matrix.
* Change: In Hurricane::Cell, remove "Leaf" related methods, replace
them by "TerminalNetlist" one, especially Collections. Now we have
two clear sets of Collections to walkthough the layout or the
netlist.
Change the "Terminal" flag into "TerminalNetlist".
* Change: In Hurricane::CellCollections, rename "Leaf" into
"TerminalNetlist" collections and apply the new semantic to the
locators.
* Change: In Hurricane::DataBase, Leaf to TerminalInstance renaming.
* Change: In Hurricane::DeepNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::HyperNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Instance, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Viewer::HierarchyInformations, Leaf to
TerminalInstance renaming.
* Change: In CRL::AllianceFramework, Leaf to TerminalInstance renaming.
* Change: In CRL::Catalog, Leaf to TerminalInstance renaming.
* Change: In CRL::ApParser, Leaf to TerminalInstance renaming.
* Change: In EtesianEngine::AddFeeds, Leaf to TerminalInstance renaming.
* Bug: In EtesianEngine::resetPlacement, move there the loop over
non terminal netlist instances to flag fully placed sub-blocks
as terminal for the netlist. Only then remove the feed cells
from unplaced instances. Previously, the feed cells where stripped
even from already placed instances.
* Change: In Katana, Leaf to TerminalInstance renaming.
* Bug: In Bora::PyDSlicingNode, allow the range parameter to be the
Python None object when we do not want to pass one but need to
have it as positional parameter.
* Change: In Cumulus/clocktree/ClockTree.py, Leaf to TerminalInstance
renaming.
* New: In bootstrap/docker, paraphernalia to rebuild and check Coriolis
for Debian 9, Ubuntu 18 & SL 7 on pristine systems. Added scripts
to rebuild Alliance as well and perform the alliance-check-toolkit
regression tests.
* Change: Updated installation documentation. Added a section for docker.
* Change: In documentation, now generate the overall documentation using
Pelican instead of Sphinx. This allows to have an unified approach
between the coriolis.lip6.fr website and the local documentation.
So we keep using "only" two doc generators: doxygen & Pelican.
* In CRL::Cyclop/CMakeLists.txt, add *again* the MOC files to the list
of .cpp . Don't know what is happening here with MOC under Qt 5.
* In CRL/python/helpers.io, cleanly fails if neither PyQt 4 nor PyQt 5 is
found. And tell it directly because this the module tasked to handle
the exceptions/errors...
* In Cumulus/plugins/AboutWindow.py, try PyQt 4 then PyQt 5.
* In documentation/UsersGuide, now tells explicitely that Qt 4 must be
used under RedHat 7 and Qt 5 under Debian.
* New: In bootstrap/coriolisEnv.py, add the "etc" directory to the
PYTHONPATH as initialization are now Python modules.
* New: In Hurricane/analogic, first groundwork for the integration of
PIP/MIM/MOM multi-capacitors. Add C++ and Python interface for the
allocation matrix and the list of capacities values.
* Change: In Hurricane::RegularLayer, add a layer parameter to the
constructor so the association between the RegularLayer and it's
BasicLayer can readily be done.
* Change: In Hurricane::Layer, add a new getCut() accessor to get the
cut layer in ViaLayer.
* Change: In Hurricane::DataBase::get(), the Python wrapper should no
longer consider an error if the data-base has not been created yet.
Just return None.
* Bug: In Isobar::PyLayer::getEnclosure() wrapper, if the overall
enclosure is requested, pass the right parameter to the C++ function.
* Change: In AllianceFramework, make public _bindLibraries() and export
it to the Python interface.
* Change: In AllianceFramework::create(), do not longer call bindLibraries().
This now must be done explicitely and afterwards.
* Change: In AllianceFramework::createLibrary() and
Environement::addSYSTEM_LIBRARY(), minor bug corrections that I don't
recall.
* Change: In SearchPath::prepend(), set the selected index to zero and
return it.
* Change: In CRL::System CTOR, add "etc" to the PYTHONPATH as the
configuration files are now organized as Python modules.
* New: In PyCRL, export the CRL::System singleton, it's creation is no
longer triggered by the one of AllianceFramework.
* New: In CRL/etc/, convert most of the configuration files into the
Python module format. For now, keep the old ".conf", but that are no
longer used.
For the real technologies, we cannot keep the directory name as
"180" or "45" as it not allowed by Python syntax, so we create "node180"
or "node45" instead.
Most of the helpers and coriolisInit.py are no longer used now.
To be removed in future commits after being sure that everything
works...
* Bug: In AutoSegment::makeDogleg(AutoContact*), the layer of the contacts
where badly computed when one end of the original segment was attached
to a non-preferred direction segment (mostly on terminal contacts).
Now use the new AutoContact::updateLayer() method.
* Bug: In Dijkstra::load(), limit symetric search area only if the net
is a symmetric one !
* Change: In Katana/python/katanaInit.py, comply with the new initialisation
scheme.
* Change: In Unicorn/cgt.py, comply to the new inititalization scheme.
* Change: In cumulus various Python scripts remove the call to
helpers.staticInitialization() as they are not needed now (we run in
only *one* interpreter, so we correctly share all init).
In plugins/__init__.py, read the new NDA directory variable.
* Bug: In cumulus/plugins/Chip.doCoronafloorplan(), self.railsNb was not
correctly managed when there was no clock.
* Change: In cumulus/plugins/Configuration.coronaContactArray(), compute
the viaPitch from the technology instead of the hard-coded 4.0 lambdas.
In Configuration.loadConfiguration(), read the "ioring.py" from
the new user's settings module.
* Bug: In stratus.dpgen_ADSB2F, gives coordinates translated into DbU to
the XY functions.
In st_model.Save(), use the VstUseConcat flag to get correct VST files.
In st_net.hur_net(), when a net is POWER/GROUND or CLOCK also make it
global.
* Change: In Oroshi/python/WIP_Transistor.py, encapsulate the generator
inside a try/except block to get prettier error (and stop at the first).
* Change: In Hurricane::CellWidget, set the minimal size to 350 pixels
to fit my normal DPI secondary screen...
* Change: In Hurricane::Error(), reactivate the backtrace generation by
default. Seriously slow down the program each time an Error is to
be constructed.
* Bug: In Analog::Device::preCreate(), check for NULL Technology before
attempting to use it.
* Change: In Hurricane/Analog, remove all '*Arguments*' classes and their
Python interface. It was an obsoleted way of passing devices parameters
to the Python layout generators (located in Oroshi). Now we just get
them straight from the Device with the getParamter() method.
* Change: In CRL::System CTOR, add Python pathes for Oroshi & Karakaze.
* Change: In Oroshi/Python/WIP_*.py layout generator scripts, remove
all uses of the "Arguments". Directly access the parameters through
the device itself. Make the checkCoherency() with identical arguments
as of layout().
* New: Bora tool that performs analog place & route. Based on a slicing
tree representation. It is the thesis work of Eric Lao.
Code beautyfication and some programming cleanup.
* New: Karakaze tool, provide the Python base class AnalogDesign used
to build an analog design. Create/configure devices and assemble
them in a slicing tree.
* Change: In Unicorn/cgt.py, display the stack trace in case of an
ImportError exception as well as for other exceptions.
Add Bora to the set for included tool engines.
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
models descriptors (for Spice). Spice description is not used yet
but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
provides support for transistors, capacitors and resistors. Only
transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
Analog extension (analog.conf & devices.conf). Thoses are optionals
and a simple warning is issued if not found.
Added helpers/AnalogTechno.py DTR loading helper.
Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
* Change: In all tools supplying documentation, as we use some specific
software to create the doc, they may not be available, or worse, be
and incompatible version. So, by default, we install the files shipped
with the git repository. To force a full doc rebuild, use the "--doc"
flag of ccb.py.
* New: In Hurricane::Isobar::PyPolygon, export the getSubPolygons()
method. Makes a list of list (maybe tuple should have been better
to prevent user's rewrite).
* Change: In documentation/examples/scripts/, update polygons.py to
serve as a very basic test-bench for Polygon, manhattanhization
and sub-polygons display.
* New: In CRL, implement a GDSII parser. The complete syntax is supported,
but only a few subset is really taken into account. It is intended to
load the layout of standard cells only. The interface of the cell is
provided through a LEF file and it complete layout through the GDSII.
The loader work in a Library way. It takes a Hurricane library as
argument and search in the GDSII library structures with a name
matching the Cell of the library and complete them.
* Change: In Hurricane::Component, put the Contour methods at Component
level so we can use them in a generic way in the CellWidget drawing
primitives.
* New: Hurricane::Rectilinear polygon, for small rectlinear polygons.
Should be less than 100 vertexes. For bigger ones, use Polygon
which allows slanted egdes.
* Bug: In CRL, freepdk_45/technology.conf, there seems to be an incoherency
bettween the GDSII layer numbers as defined in the Cadence FreeePDK45.tf
file and the one used in the supplied layout of the GDSII cells.
For now, we align on the GDSII cells to get nice layouts, but it
has to checked.
* New: In Hurricane::Diagonal, new object to represent 45° and 135°
segments (X routing). Althought they have source & target, they
are not articulated like Horizontal & Vertical, due to the
combined displacement of X and Y (diagonal).
Maybe we should create a common class for all the polygons
to make "::getContour()" a method.
Now we could represent self capacitances and high frequency
wires.
* New: Hurricane::Triange as been renamed into Hurricane::Polygon.
Add support for convex polygons. Polygon are approximateds by
excess by a manhattan rectilinear polygon (with potentially
thousands of vertexes). To reduce the memory footprint,
compaction techniques reducing by at least a factor 4 has been
implemented. We could go further by only storing the non-repetitive
part of the edge (defined by the integral fraction dY/dY).
We will see, if the program slows too much.
The manhattan approximate is always computed but displayed
only if the polygon grid step is greated than 4 pixels.
The level of approximation of the polygons can be controlled
through the "DbU::_polygonStep" parameter.
* Change: In CRL/coriolisInit.py and CRL/helpers/Technology.py, regroup
all DbU related parameters into "technoConfig" (i.e. suppress
"viewerConfig"). Update all the relevant technology.conf configuration
files.
Change the loader behavior so that "technoConfig" is read first
and is now responsible for creating the Technology of the DataBase.
* New: In Hurricane::CellWidget, added support for displaying mahanttanized
polygons.
* Change: In documenation/scripts/expample/polygons.py, perform (I hope)
a comprehensive test of the polygons (check all slopes, clockwise and
conter-clockwise).
* New: In Hurricane::DbU, added template to manage vector<> of DbU.
Support for the "polygonStep" parameter.
* New: In Hurricane::Entity, add an id counter limit and a memory size
limit. The two limits are checked only when a new Entity object is
created. This should help avoiding massive memory links.
* New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName"
parameter to specify the name of the ground/power signals to be
created if they are missing in a Cell. For Alliance libraries it
would be "vss" & "vdd" (default values), but for real technologies,
it is often "gnd!" & "vdd!".
The Blif parser is modificated to make use of it.
* Bug: In AnabaticEngine::unify(), set the resulting unified segment in
the center of the GCells common side. Gcells under a segment are
found by using the edge that cover the segment axis. When we have
a "bend" GCell stack and the axis is wrong, they could be ommited.
This was causing deleted segments to be not removed from some
Edges, then core dump.
* Change: In Anabatic::AutoSegment::create(), smarter choosing of the
reference contact, select the fixed or terminal one instead of
always the source one.
* New: In Anabatic::Edge::isEnding(), new function to check if a
segment going through an Edge is starting/ending in either source
or target GCell of the edge (active only when running in channel
mode).
* New: In Anabatic::Edge::add(), a segment takes part in the occupancy
only if it is not ending in either source or target (channel mode
only). The occupancy due to terminal is pre-computed in Katana.
* New: In Anabatic::Edge::ripup(), in channel mode, never ripup a
segment which is ending in either source or target (we *have* to
access this edge to connect to the terminal).
* Bug: In Anabatic::GCell::hcut() and vcut(), force the update of
the Edge which is on the side that will get splitted by the cut.
It's capacity will be reduced to it must be updated.
* Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally
update horizontals or verticals only. We may require only a partial
update when resizing the GCell in only one direction.
This, again, related to the fact that we compute the GCells under
a segment thanks to it's axis position, so we need to be very careful
when modificating axis.
* Change: In Katana::Block::resizeChannels(), only update GContact vertical
position. Do not disturb X positions of segments.
* Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some
Edges can have a zero capacity, but still be reachable if the net has
a terminal in either source or target. Look for this case and return
a distance of zero instead of "unreachable". This was causing the
global routing not to complete in channel mode.
For computing the edge distance, makes the vertical edges much more
long (10 times) than the horizontal ones as the vertical capacity is
very limited. Hard coded for now, should make it a parameter in the
future.
* Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity
of edges with reserveCapacity for each terminal inside a GCell.
Both north and south edges are decreased as we a terminal will
block both north and south edges.
As a counterpart, the Edge capacity is not decreased when the
global router connect to a terminal.
* Change: In Katana::RoutingEvent::revalidate(), when in repair stage,
do not expand the slack for horizontal segments in channel mode.
So they may not overlap the standard cell row.
* Bug: In Stratus documentation, do not use the french option in babel,
the documentation is in english!
* New: In Documentation, added Hurricane/Python tutorial, part for drawing
layout.
Las Safin
Jean-Paul Chaput
Marie-Minerve Louërat
Roselyne Chotin-Avot