* New: In CRL::NamingScheme, add a flag VstNoLowerCase, and its
management it in the Verilog to VHDL converter.
* Change: In CRL::BlifParser::Model::toVhdlModels(), disable the
lowercasing of identifiers. We shouldn't apply Alliance VHDL
subset constraits when reading blif files. So we will see
uppercase identifiers in Coriolis.
* Change: In CRL::VstParser, no longer lowercase identifiers that
are *not* VHDL keywords. Uppercases are legals in VHDL...
* New: In CRL::Catalog::State, add a new flag VstNoLowerCase to
tell if the VST driver should keep the uppercases.
* Change: In CRL::VhdlEntity, add a VstNolowerCase flag to disable
the lowercasing.
* Change: In CRL::vstDriver, lower case the file name if needed.
remove the previously opened filename if it differs from the
lowercased one.
* Change: In UnicornGui CTOR, disable VHDL enforcement for the
Blif parser.
* Change: In CRL::LefParser::_macroCbk(), create a Catalog entry for the
newly read MACRO (that is Cell) and sets the Logical, Physical,
InMemory and TerminalNetlist flags.
* Bug: In CRL::LefParser::_siteCbk(), check for NULL cell gauge.
* New: In CRL::AllianceFramework, add setCellGauge(), to set the default
cell gauge. Exported to Python.
* Change: In CRL/etc/common/technology.py, create variables for VIA
layers, so we can modify their properties afterwards.
* New: In CRL/etc/node45/freepdk45, port the configuration files to the
new Python "importable" format.
Note: in kite.py, all the gauges (Routing & Cells) must be named
"LEF.CoreSite" to please my LEF parser, so it can match the gauge
name with the SITE name for standard cells.
* Bug: In Anabatic::NetBuilderVH::_do_2G(), forgotten to be reimplemented
from the base class. Simply redirect to _do_xG().
* Change: In Katana::PowerRailsPlanes::PowerRailsplanes(), create plane
from the layers in the RoutingGauge and their associated blockages
instead of sweeping through all the basic layers.
Allow to distinguish bewteen "METAL" (symbolic) and "metal" (real).
* Bug: In Hurricane::NetRoutingState::getSymValue(), outrageously bad
computation of the symmetric coordinate when the value was superior
to the axis... (shame on me).
* Change: In Anabatic::Disjkstra::load(), for symmetrically paired nets,
check that the axis of symmetry is *outside* the searchArea.
Otherwise, the two mirrored areas overlaps and the two nets will
unescapably be on top of each other. Issue a warning but still
continue.
* Change: In Anabatic::Vertex::isRestricted(), allow perpandicular
wire to go through struts or thin (less than one routing pitch)
node. May have to recheck in the future and restrict to struts
only.
* Bug: In Bora::HVSlicingNode::updateSymNetAxis(), rescursive call in
child node was not systematically done (bad curly brace position).
Also checks that symmetries are not empty before accessing the
front element (one less core dump).
* Change: In CRL/helpers, cumulus/plugins, oroshi & karakaze,
Move towards more Python PEP8 compliance:
* All indentations sets to 4 spaces (in progress).
* In plugins, remove messages about software collections
and RHEL (too many case could wrongly lead to that).
Instead systematically uses "helpers.io.catch()".
* Put in lowercases all modules names. Note that C++ exported
modules *keep* their Capitalized names (to preserve the
identity with the C++ namespace).
* When making import, use full path.
* Rename the run function from "ScriptMain()" to "scriptMain()".
* Cleanup: In CRL/etc, remove obsoleted configuration files,
the one ending in ".conf". Keep those who have not been ported
to the new style yet.
* New: In Hurricane/src/configuration, first trial at replacing the
C preprocessor macros by C++ templates. Applied first to configuration
from VLSISAPD.
This is unfinished business, just a limited demonstrator for now.
It is installed as a separate Python library "Cfg2" which do not
interact with the rest of Coriiolis.
The end goal is to fully remove boost and merge VLSISAPD useful
components directly inside Hurricane.
* Change: In Hurricane::Viewer::ExceptionWidget & CRL/python/helpers/io.py,
downscale icons for non-HiDPI screen.
* Change: In CRL/etc/common/display.py, change the display threshold of
METAL1 layer so it do not appear at high scaling.
* New: In Etesian, activate the "setFixedAbHeight()" feature and export it
to Python. Allows to increase the space margin at constant height.
To be used by the P&R conductor.
* Change: In Unicorn/cgt.py, when running a script, insert the current
working directory at head of the sys.path, not at the end. So installed
modules do not shadow local one.
* New: In Anabatic::Edge, new accessor "getRawcapacity()" to know the full
capacity of the edge, that is, the real maximum number of tracks that
can go through the associated side.
* Change: In Katana/BloatProfile/Slice::tagsOverloaded(), bloating policy
change, now bloat all the instances under the GCell, not only the first
one.
* Change: In KatanaEngine::runGlobalRouter(), restore the search halo growth
policy to expanding of 3 GCells every 3 iterations.
New metrics displayed, the edge wire length length overload.
* Change: In cumulus/plugins/ConductorPlugin.py, now accepts the following
configuration parameters:
- "anabatic.globalIterationsEstimate", maximum number of global
iterations during the bloating computation passes.
- "conductor.useFixedAbHeight", tells wether the additionnal blank
space must be added so the aspect ratio is kept or the height is
kept (and the block become wider).
Disable the display of "rubber" to unclutter a little the view.
This commit contains two set of features that should have been commited
separately.
1. Compliance with clang 5.0.1, tested with the RedHat collection
llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS)
with Xcode & macports. The bootstrap install system has been modificated
accordingly.
2. The basic support for routing density driven placement. Related
features are:
* Bloat property. Each Occurrence of an Instance can be individually
bloated. This property not attached to any tool to allow the placer and
router to share it as wanted. Nevertheless, it is defined in Etesian.
* BloatProfile in Katana, add individual Bloat properties to Instances
occurrences based on the East & North overflowed edges of each GCell.
* Support in ToolEngine for a "pass number" of a tool. This pass number
is mainly used to make "per pass" measurements. The MeasureSet system
is improved accordingly to support multiple values of a same measure.
* Embryo of "P&R Conductor" to perform the place & route loop until the
design is successfully placed. May be the first brick of a Silicon
Compiler.
* Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to
the python component for macport (ex: python27).
* Change: In boostrap/build.conf, put etesian before anabatic for
instance occurrence BloatProperty dependency.
Added option support for the "llvm-toolset-7" collection to build
against clang 5.0.1.
* Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates
for first & second arguments must be called with <const T> and <const U>
as the pair itself is const (and not simply <T> & <U>).
* Change: In Hurricane::getSlot() temlate, only use "string" arguments and
not const string&, simpler for template argument deduction.
* Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<>
template has a static member "_name". Clang did show that the template
for this static number has to be put inside the namespace where the
template *is defined* (i.e. Hurricane) instead of the namespace where
it is instanciated (i.e. Analog).
* Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must
be put outside the C linkage back in the Isobar C++ namespace (clang).
* Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification
(clang).
* Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change
signature so it matches the one of the base class (clang).
* Bug: In Hurricane::CellPrinter, use double brackets for initializer list
(clang).
* Change: In Hurricane::Breakpoint, reverse the meaning of the error level.
Only error level *lesser or equal* than the stop level will be enabled.
* Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the
current working directory in the sys.path as in certain configuration
it may not be included.
* Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when
encountering a RoutingPad on a top-level Pin Occurrence. The segment
was generated in the wrong direction, creating DRC violations on the
"mips_core_flat" example.
* Change: In CRL::Measures, partial re-design of the measurements management.
Now, each kind of measure can accept multiple values put in a vector.
The index is intented to match a tool run number.
* Change: In CRL::Histogram, add support for multiple sets of datas,
indexeds with tool run number.
* Change: In CRL::ToolEngine, add support for multiple pass number, add
addMeasure<> templates for the various data-types.
* Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record
name constants.
* New: Etesian::BloatProperty, property to attach to Instance occurrences
that contains the extra number of pitch to add to the cell width.
* Bug: In AutoSegment::CompareByDepthLength, the segment length comparison
was wrong, it was always returning true, which broke the "strick weak
ordering" of the comparison.
This was producing a core-dump in GCell::updateDensity() when sorting
a vector<>. The end() iterator was being dereferenced, leading to the
problem.
* Bug: In Katana::DataSymmetric::checkPairing(), the test for segments
whose axis is perpandicular to the symmetry axis was wrong
("!=" instead of "-").
* New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells()
and selectBloatedInstances() to automatically select segments from
overloaded edges, overloaded GCells and bloated cells.
* Change: In KatanaEngine, return a more detailed success state, distinguish
between global and detailed.
Add support for multiple routing iterations.
* New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing
driven placement.
* New: In CRL/python/helpers.io, vprint() wrapper around print to display
messages according to the verbose level.
In etc/*, add messages in every configuration files so we may know
under which we are running.
* New: In bootstrap/coriolisEnv.py, add the "etc" directory to the
PYTHONPATH as initialization are now Python modules.
* New: In Hurricane/analogic, first groundwork for the integration of
PIP/MIM/MOM multi-capacitors. Add C++ and Python interface for the
allocation matrix and the list of capacities values.
* Change: In Hurricane::RegularLayer, add a layer parameter to the
constructor so the association between the RegularLayer and it's
BasicLayer can readily be done.
* Change: In Hurricane::Layer, add a new getCut() accessor to get the
cut layer in ViaLayer.
* Change: In Hurricane::DataBase::get(), the Python wrapper should no
longer consider an error if the data-base has not been created yet.
Just return None.
* Bug: In Isobar::PyLayer::getEnclosure() wrapper, if the overall
enclosure is requested, pass the right parameter to the C++ function.
* Change: In AllianceFramework, make public _bindLibraries() and export
it to the Python interface.
* Change: In AllianceFramework::create(), do not longer call bindLibraries().
This now must be done explicitely and afterwards.
* Change: In AllianceFramework::createLibrary() and
Environement::addSYSTEM_LIBRARY(), minor bug corrections that I don't
recall.
* Change: In SearchPath::prepend(), set the selected index to zero and
return it.
* Change: In CRL::System CTOR, add "etc" to the PYTHONPATH as the
configuration files are now organized as Python modules.
* New: In PyCRL, export the CRL::System singleton, it's creation is no
longer triggered by the one of AllianceFramework.
* New: In CRL/etc/, convert most of the configuration files into the
Python module format. For now, keep the old ".conf", but that are no
longer used.
For the real technologies, we cannot keep the directory name as
"180" or "45" as it not allowed by Python syntax, so we create "node180"
or "node45" instead.
Most of the helpers and coriolisInit.py are no longer used now.
To be removed in future commits after being sure that everything
works...
* Bug: In AutoSegment::makeDogleg(AutoContact*), the layer of the contacts
where badly computed when one end of the original segment was attached
to a non-preferred direction segment (mostly on terminal contacts).
Now use the new AutoContact::updateLayer() method.
* Bug: In Dijkstra::load(), limit symetric search area only if the net
is a symmetric one !
* Change: In Katana/python/katanaInit.py, comply with the new initialisation
scheme.
* Change: In Unicorn/cgt.py, comply to the new inititalization scheme.
* Change: In cumulus various Python scripts remove the call to
helpers.staticInitialization() as they are not needed now (we run in
only *one* interpreter, so we correctly share all init).
In plugins/__init__.py, read the new NDA directory variable.
* Bug: In cumulus/plugins/Chip.doCoronafloorplan(), self.railsNb was not
correctly managed when there was no clock.
* Change: In cumulus/plugins/Configuration.coronaContactArray(), compute
the viaPitch from the technology instead of the hard-coded 4.0 lambdas.
In Configuration.loadConfiguration(), read the "ioring.py" from
the new user's settings module.
* Bug: In stratus.dpgen_ADSB2F, gives coordinates translated into DbU to
the XY functions.
In st_model.Save(), use the VstUseConcat flag to get correct VST files.
In st_net.hur_net(), when a net is POWER/GROUND or CLOCK also make it
global.
* Change: In Oroshi/python/WIP_Transistor.py, encapsulate the generator
inside a try/except block to get prettier error (and stop at the first).
* Bug: In cumulus/plugins/PadsCorona.py, when a pad is at the beginning
or at the end of the side, the pad corona terminal may be outside
the corona range (not directly facing it). In that case, create a
bend to reach it.
Worse, in some case more than one (but likely no more), could be
in that case, so not only do we create a bend but also make a
shift in the bended segment so two consecutive ones are not on the
same axis, causing shorts.
If both end pads of a corner are in that case, we cannot prevent
a short, so at least, issue a warning.
* Bug: In CRL::Vhdl, the Entity::VstUseConcat was not passed correctly
along, so we did get a strange mix of conat and direct assignment.
* New: In Unicorn/cgt.py : added --vst-use-concat options to control
the VST driver behavior.
* New: In Isobar::PyCell, export the isRouted() and setRouted() to the
Python interface.
* Bug: In CRL::Entity::parseEntity(), check that the closing parenthesis
is the last character of the net name. Issue a more relevant error
message.
* In Anabatic::NetBuilder::_do_xG() and all other unimplemented methods,
throw an error if called from a derived classes instead of just
issuing a message in the debug stream. Avoid later core dumps...
* In Anabatic::NetBuilderHV, implement the builders for GCells with
one pin. Needed to support chip/corona routing.
* Bug: In Cumulus/plugins/Chip.py, check that coronaCk exists before
using it.
* New: In Cumulus/plugins/PadsCorona/Side._placePad(), when routing
a design with symbolic pads, export the chip external "pad"
connectors to be able to perform a lvx (otherwise cougar do not
create external nets).
In Corona._createCoreWire(), set the minimal gap between the pads
and the corona to 6 pitches. Empirical value to avoid DRC errors
with symbolic pads (pxlib).
When successufully done, mark the Corona cell as routed.
* Bug: In Cumulus/plugins/Core2Chip.IoNet, the regex for vectorizet net
was wrong, it was allowing only one digit in the index.
* Bug: In Cumulus/plugins/Core2Chip.cmos, correct management of
pad & corona clock nets. Correct connexion between vdde/vddi.
* Bug: In Unicorn/cgt.py, forgot to execute scripts when in text mode.
* Change: In Hurricane::Error constructors disable the backtrace generation.
(*very* slow).
* Change: In Hurricane::Library::getHierarchicalname(), more compact
naming. Remove the name of the root library.
* New: In Hurricane::Net, new type "FUSED", for component with no net.
More efficient than having one net for each.
* Change: In CellViewer, BreakpointWidget, use Angry Birds icons.
* Change: In CellWidget::State, use the hierarchical name (cached) as key
to the state. This allow to load two cells with the same name but from
different libraries in the widget history.
* Change: In PyGraphics, export "isEnabled()" and "isHighDpi()" functions.
* Change: In CRL/etc/symbolic/cmos/plugin.conf, and
CRL/etc/common/plugin.conf use the physical dimensions converters.
* Change: In CRL/etc/symbolic/cmos/technology.conf, make the GDS layer
table coherent with the default Alliance cmos.rds.
* New: CRL/python/helpers/io.py, put ErrorMessage new implementation here,
along with a new ErrorWidget written in PyQt4. It seems finally that
PyQt4 can be used alongside Coriolis Qt widgets.
New ErrorMessage.catch() static function to manage all exceptions
in except clauses.
* Change: In CRL/python/helpers/, no longer use ErrorMessage.wrapPrint(),
directly print it.
Rewrite the utilities to display Python stack traces "textStacktrace()"
and "showStacktrace()".
* Change: In CRL::AllianceFramework, shorten the names of the libraries.
* Change: In CRL::ApParser & CRL::ApDriver, more accurate translation between
Alliance connectors (C record) and Hurricane::Pin objects. Pin are no
longer made square but thin and oriented in the connecting direction.
Use the new fused net for unnamed components.
* New: In CRL::GdsParser, implementation of SREF parsing, i.e. instances.
Due to the unordered nature of the GDS stream, instances creation are
delayed until the whole stream has been parsed and only then are they
created.
For the sake of reading back Alliance s2r GDS, we assume that any
TEXT following a boundary is the Net name the boundary (component)
belongs to.
Create abutment box for Cells, computed from the bounding box, so
the Hurricane QuadTree could work properly.
Make use of the fused net for unnamed components.
* New: In Cumulus/plugins/chip, complete rewrite of the I/O pad management.
Now we can mix real (foundry) pads and a symbolic core.
To cleanly support the de-coupling between the real part and the
symbolic one we introduce a new intermediary hierarchical level, the
corona. We have now:
Chip --> Pads + Corona --> Core.
At chip level (and if we are using real pads) the layout is fully
real (excepting the corona).
The Corona contains everything that is symbolic. It has symbolic
wires extending outward the abutment box to make contact with the
real wires coming from the pads.
In the pad ring we can use corners instances (or not), pad spacers
or directly draw wires between connectors ring pads.
Provide two flavors: placement only or full place & route.
WARNING: If routing in a second step, *do not route* the *Chip* but
the *Corona*.
* Change: In Cumulus/plugins/clocktree, give the modified Cell an
additional extension of "_cts" (Clock Tree Synthesis) instead of
"_clocked", to follow the common convention.
* New: In cumulus/plugins/S2R.py, encapsulate call to Alliance S2R and
reload the translated Cell in the editor.
* New: In cumulus/plugins/core2chip, provide an utility to automatically
create a chip from a core. To work this plugins must have a basic
understanding of the pad functionalities which may differs from
foundry to foundry. So a base class CoreToChip is created, then for
each supported pad foundry a derived class is added. Currently we
support AMS c35b4 and Alliance symbolic cmos.
* Bug: In Anabatic::Configuration, read the right configuration parameter
"anabatic.topRoutinglayer" (Katana), and not the one for Katabatic...
* Change: In Unicorn/cgt.py, process the plugins in alphabetical order
to ensure a reproductible ordering of the menus...
* New: In Hurricane::IntrusiveMap, introduce IntrusiveMapConst which allow
to search with a "const Key&" instead of a "Key", sparing the copy
construction of the Key.
* Change: In Hurricane::Cell::NetMap, use the new kind of map with
"const Name&" key access. This speeds up the Cell::getNet() method
by suppressing one copy construction of a Name, which are costly
after all...
Should review the whole code to use "const Name&" everywhere it
is possible.
* Change: In Hurricane::Entity & Hurricane::DBo, displace the unique
identifier from Entity to DBo (move up to the base class).This
to allow us to build deterministic map of DBo requireds in
UpdateSession (which is built upon a SharedProperty).
WARNING: This break the JSON database exportation support, do not
use it until fixed/rewritten.
* Change: In Hurricane::Layer, add an attribute to know if a layer is
associated to a blockage. Modificate accordingly PyLayer and
BasicLayer.
* Change: In Hurricane::SharedProperty, the set of owners (DBo*) is now
stored in a std::set sorted on the objects Ids, instead of a simple
vector. The linera search time through the std::vector was starting
to show (ISPD05 bigblue1).
* Bug: In Isobar::PyInstance, make full contructor signature (5 arguments)
conform to the C++ one. It was only accepting the four first and
forcing the placement status to be FIXED.
* Bug: In CRL/etc/symbolic/ispd05/kite.conf, update for the new configuration
requirements where all distance must be converted into DbU in the
file itself (use "helpers.l()", "helpers.m()"). Apply to the cell &
routing gauges.
* Bug: In CRL/etc/symbolic/ispd05/technology.conf, update for the new
configuration. "helpers.initTechno()" *must* by called first thing
in this file in order for the Technology to be created.
* New: In CRL::AllianceFramework, add matchCellGauge() &
matchCellgaugeByHeight()
* New: In CRL::CellGauge, add a flag to distinguish gauges meant for
IO Pads and an "isPad()" predicate.
* Change: In CRL::Ispd05Bookshelf, flush the UpdateSession stack every
1000 elements additions. Maybe not necessary now the the UpdateSession
property relies on a std::set instead of a std::vector.
* New: In CRL::LefImport, support for SITE and match/create the appropriate
CellGauge on the fly. Specific support for MACROS that are flagged PAD.
Add a dedicated post-treatment for PAD connectors, extend them toward
the boundary of the nearest abutment box side. Tested only on AMS 350nm
c35b4 for now.
This part is most likely to be tweaked for every kind of real foundry
pad that we may encounter...
* Change: In EtesianEngine::findYSpin(), use the C++ "for" construct to loop
over Collections.
* Change: In Unicorn/cgt.py, register the Python/C++ tutorial support by
default.
* Bug: In Hurricane::DrawingQuery::drawGo(), forgot to apply translation
on Polygon and Rectilinear.
* Bug: In Hurricane::Rectilinear, forgot implementation of getContour().
Add a new accessor getPoints().
* Bug: In CRL::Blif::load(), do not always enforce translation towards
VHDL names. When loading LEF+gds it may change the Cell names between
the two stages so the gds layout do not get added to the LEF Cell
phantom.
Now add a boolean enforceVhdl argument (may be a flag in the future).
* Bug: In ::GdsStream::operator<<(Cell*), forgot to drive the Rectilinear.
* New: In Unicorn/cgt.py, add "-K" option to use Katana for global and
detailed routed (in place of Knik/Kite).
Comment the preroute stage to ensure determinism (I often forgot
to run this stage while in graphic mode).
* Change: To allow multiple tools, and not only Knik, to link and use
FLUTE, remove it from Knik and put it at top level.
Bootsrap must compile this new tool and the library must be
included in all CMakeLists.txt depending on Knik (and soon
Anabatic).
* Change: In Hurricane::CellWidget, set the minimal size to 350 pixels
to fit my normal DPI secondary screen...
* Change: In Hurricane::Error(), reactivate the backtrace generation by
default. Seriously slow down the program each time an Error is to
be constructed.
* Bug: In Analog::Device::preCreate(), check for NULL Technology before
attempting to use it.
* Change: In Hurricane/Analog, remove all '*Arguments*' classes and their
Python interface. It was an obsoleted way of passing devices parameters
to the Python layout generators (located in Oroshi). Now we just get
them straight from the Device with the getParamter() method.
* Change: In CRL::System CTOR, add Python pathes for Oroshi & Karakaze.
* Change: In Oroshi/Python/WIP_*.py layout generator scripts, remove
all uses of the "Arguments". Directly access the parameters through
the device itself. Make the checkCoherency() with identical arguments
as of layout().
* New: Bora tool that performs analog place & route. Based on a slicing
tree representation. It is the thesis work of Eric Lao.
Code beautyfication and some programming cleanup.
* New: Karakaze tool, provide the Python base class AnalogDesign used
to build an analog design. Create/configure devices and assemble
them in a slicing tree.
* Change: In Unicorn/cgt.py, display the stack trace in case of an
ImportError exception as well as for other exceptions.
Add Bora to the set for included tool engines.
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
models descriptors (for Spice). Spice description is not used yet
but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
provides support for transistors, capacitors and resistors. Only
transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
Analog extension (analog.conf & devices.conf). Thoses are optionals
and a simple warning is issued if not found.
Added helpers/AnalogTechno.py DTR loading helper.
Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
* New: In CRL, implement a true GDSII driver. The driver is directly under
CRL and do not use an intermediate structure in vlsisapd. The ASCII
GDSII is removed.
Huge polygons are not supported yet. Have to be split up in
sub-polygons of less than 4000 vertexes.
Symbolic layout can be exported to give a rough idea of the layout
but RDS expension is not applied. Symbolic composite layers are
expansed into their basic layers so the design *looks* normal.
* Deprecated: In CRL, remove all traces of the old XML configuration
parsers. No one needs them now, including Chams.
* Bug: In CRL::BlifParser, before blindly loading the model of a subckt
from disk with AllianceFramework, checks if it is in the Catalog
first. Load with AllianceFramework only cells that are in the
Catalog.
This prevent a file of the same name than a model to be loaded
shadowing the later defintion of the model in the Blif file.
All this is due to the fact that Blif could be non-ordered for
the models...
* Change: In Hurricane::BasicLayer, the "extract number" is replaced
by a GdsLayer and GdsDatatype to generate accurate GDS files.
Even if datatype is 0 most of the time.
Update all the "technology.conf" files in CRL to provide those
two numbers.
* New: In CRL Core, added LEF importer for real technologies. This is
still a work in progress. Exported in Python interface.
* Bug: In CRL Core, CellGauge::getRecord() correctly display DbU
attributes.
* Change: In Unicorn, mofificate ImportCell and ImportCellDialog to
support the LEF importer. Add a template layer so we can work with
loaders returning Cell* or Library*.
* Change: In Unicorn::UnicornGui::getCellFromDb(), in addition to the
Alliance loader, uses the DataBase::getCell() too (for Cells that
are *not* in Alliance).
* New: In CRL Core Python helpers, add a "showPythonTrace()" function to
custom display the Python stack trace in case of exception. It ha
been made to look like a gdb trace.
* In Unicorn, cgt.py, use showPythonTrace().
* New: In CRL.python.helpers, all methods make use of the quiet mode to
allow completly silent initialisation.
Introduce isderived() function to check the derivation relationship
of two C++ encapsulated classes by Isobar. The Python isinstance do
not work, all C++ wrapped classes are of the base type 'type'.
isderived() uses the MRO mechanism (Method Resolution Order) as a
workaround. I can't find in the documentation if it's the expected
behavior or if i did miss something in when building my classes.
* Change: In Anabatic, remove GraphicAnabaticEngine, PyGraphicAnabaticEngine,
PyAnabaticEngine (but keep PyAnabatic for constants exportation)
and GlobalRoute (moved to Katana). Drawing methods for Edge & GCell
are moved into GraphicKatanaEngine.
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
* New: In Bootstrap, add cmake detection for libbfd.
* New: In Hurricane, in Backtrace, add BFD support to read debuginfo from
the shared libraries (aka DSO) when compiled with "-g". This avoid the
tedious step of running gdb after generating a core dump. It is also
mandatory in ExceptioWidget to known from where an exception was thrown
as Qt::notify() block all C++ exceptions.
Currently works only under Linux (gcc or clang), may be extended in
the future.
The BFD reading is based on the small utility from:
Don Hatch (hatch@plunk.org)
http://www.plunk.org/~hatch/goodies/backtracefilt.C
And small trinket: adjust the size of the window for high DPI screens.
* New: In CRL Core & Unicorn add link toward libbfd, if needed.
* Bug: In Anabatic:
- In _propagate(), on reaching a target, forgot to remove it from
the queue before pushing it back with the new distance. It also
simplificate the core algorithm as target as treated normal nodes.
* New: In Anabatic:
- Update cdebug to use the fastest macro version.
- More readable drawings of GCells and Edges.
- Added timer support.
- The distance is now computed in DbU::Unit (aka long) and not in
normalized float.
- The distance function is now a callback (std::function<>) that
can be changed (a default is provided at initialization).
- New concept of branch in the agglomerated connex component.
Each trace back part create a "branch" (tagged with a "branchId").
When a node is reached with the same distance, but from two
different branches, choose the the branch that was lastly created.
This create a slightly different tree which grows outward from
the newest branches.
- Makes the horizontal edges *slightly* longer than the vertical ones
to skew the tree to use vertical edges, as it is usually less
congested than the horiontal one (due to metal1 cell terminals).
It is also my understanding that it is useful to reduce the
number of vias, whithout introducing a via cost.
* New: In Bootstrap:
- Script sprof.py to perform sprof & demangle libraries execution
profile.
* ToDo: In Anabatic:
- Corner optimization. Sometimes when two corners are possible, the
wrong one is choosen. That is, one of it's edge cannot be used for
further grow of the tree.
* Change: In Hurricane Commons.h, even when cdebug print nothing, it slow
down the program (three times for Kite!). Create a macro cdebug_log
which calls cdebug *only* if the debug level is active.
* Bug: In Unicorn, in cgt.py, do not import Anabatic as it is not present
yet in the devel branch.
* Change: In Hurricane, in Commons.h, in the vector slot template, start
index at 0 and not 1 (to closer to the internal representation).
* Change: In ExtensionGo, forgotten trace system calls to update.
* Change: In Hurricane, in Flags add operator overload for "int" type
and not only "unsigned int". Otherwise the compiler complaints about
ambiguous overload when using enum values which are considered as
"int".
Simpler code for the BaseFlags::contains() method.
Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
two trace systems (trace & ltrace) by a stream-based one.
As it is a true object it is much less fragile than the one based
on defines (but maybe a little slower).
Define a reservation table for the trace levels for all the
Coriolis & Chams components.
* Change: All tools, use the new trace system.
* Bug: In Hurricane, in HApplication, ExceptionWidget ans PyHurricane.h,
forgot to catch the Hurricane::Bug exception which was leading to
terminate() without explanations.
* Change: In Katabatic, In GCellTopology, now support one GCell with
five metal1 terminal of the same net. This unlikely configuration
did appear in the SNX for the first time...
* Test: post-receive hook on server should send mail [1].
* New: In VLSISAPD, in Parameter, callback have now a tag, which the
pointer to the caller. This allow for the callback removal when
the caller is destroyed.
* New: In VLSISAPD, in WidgetDescription, when associated to a parameter,
the destructor must remove the associated callback function on
the Parameter.
* New: In Hurricane, added JSON support for Configuration, separated
from vlsisapd, as the support is not available at this point.
JSON support for Configuration, Parameter & LayoutDescription.
* Change: In Hurricane, in JsonStack, the stack of JsonObjects has been
displaced here from HurricaneHandler. This way, all
JsonObject::toData() can access the JsonOjects in the context
of the parser.
* New: In Hurricane, in DBo::toJson() added support for Entity by
reference (ids).
* New: In Hurricane, added JSON support for all Layer sub-class types.
* New: In Hurricane, in Technology, export the Layers, but must be
sorted by increasing mask value.
* New: In Hurricane, in Entity, added support for Entity by reference (ids).
* New: In Hurricane, in DataBase, added technology full support.
* New: In Hurricane, In JsonNet, move the ring rebuild management from
JsonStack to JsonNet.
* New: In Hurricane, added JSON support for NetAlias, NetExternalcomponents
(not cleanly implemented as a Relation).
* New: In Hurricane, new method Cell::fromJson() to load a cell from
a JSON file.
* New: In Hurricane, In Graphics, make it an observable, for when JSON
fully reload the graphic state, it must be able to notify other
objects (namely the Controller).
* New: In Hurricane, in ControllerWidget, observe the Graphics to regenerate
the palette as needed. New method ControllerTab::graphicsUpdated().
* New: In Hurricane, in RawDrawingStyle added a destructor to release the
Qt pen/brush. Added JSON support for HSVr, DrawingStyle, DrawingGroup,
& DisplayStyle.
* New: In Hurricane, in GraphicsWidget, rewrite correctly the readGraphics()
to erase the previous widgets and re-create the new ones.
* New: In Hurricane, in PaletteWidget, correct re-creation of the layout/widgets
in case of Graphics change.
* New: In CRL Core, in System, register the parameters callbacks with
the address of the object, for later deletion.
* New: In CRL Core, in AllianceFramework, make it observable, to notify
library changes. For the AllianceFramework creation, now allow to
completly bypass the Python initialization system, when we expect
to restore it from a full blob. Added methods to sets the default
RoutingGauge & CellGauge.
* New: In CRL Core, added JSON suppport for CellGauge, RoutingLayerGauge
& RoutingGauge.
* New: In CRL Core, in LibraryManager, oberver AllianceFramework, to update
the list of libraries in case of change (for JSON full reload).
* New: In boostrap, in ccb.py, added support for the "support" project
which contains external dependencies. Currently contains only
RapidJSON. Those dependencies must be cloned here manually.
* New: In Hurricane, Initializer class for an ordered static initialization
across different compilation modules.
* Change: In Hurricane, at DataBase level, no longer save the Cells in
the libraries, but create and ordered list of Cell. Deepest cells
(leaf cells) first. To avoid dependency problems.
* New: In Hurricane, JSON support for Property.
* New; In CRL, added JSON support for AllianceFramework, Environement &
Catalog and their associated properties. Adjustment of the
AllianceLibrary creation policy.
* New: In Hurricane, added first support for DataBase native import/export
using JSON.
We choose RapidJSON, in SAX mode, to manage the JSON format low level
Read/Write. Thus, it's Git repository http://github.com/miloyip/rapidjson
must be added under ~/coriolis-2.x/src and manually build and installed
in the Coriolis installation tree (to be integrated in ccb later).
Two mode are being supported:
1. Cell mode: one Cell only is saved. In that mode, Entities
referred by Occurrences are "outside" the file. They are coded
through their "signature" (mostly, all the values of their
attributes). The ids saved in the file cannot be restored
identically as we cannot predict when and in which context the
Cell will be reloaded.
2. Design Blob mode: the whole design hierarchy, down and including
the standard cells is saved. This way the design is completly
self contained and Entities ared referred through their ids.
A design blob can only be loaded immediatly after starting cgt
as the DataBase *must* be empty. This way we restore the whole
design hierarchy with *exactly* the same ids.
Now, Hurricane object should provide a "toJson()" method for driving
JSON, and be associated with a JsonObject derived class for parsing.
* New: In Hurricane, ability to force the next id that will be used for a
DBo (used by Design Blob Mode).
* New: In Hurricane, in DataBase, added getCell() and getLibrary() functions
to allow the hierarchical access of a Cell/Library in native mode
(i.e. whithout the requirement of AllianceFramework).
* New: In Hurricane, In CellViewer, added menu entry for Save/Load of
JSON Design Blobs. Added at this level because we consider it as the
"native" format of Hurricane.
* New: In Unicorn, added support of import/export of JSON Cell.
* Bug: In Hurricane, in Instance, when cloning an Instance or uniquifying
it's master Cell, we forgot about the Occurrences (through shared pathes).
When an instance is cloned the Shared pathes still points toward the
original Instance. And when it's the master Cell that is uniquifyed
it's the Entities pointed to that remains in the original Cell.
This is a software design problem. It is difficult to define what
policy to adopt when uniquifying: basically that means that one
Occurence is either moved onto the clone or duplicated. Furthermore,
it is not trivial to known what Occurrence is pointing on the
uniquifyed/cloned item. Have to think about it a little more.
* Bug: In Etesian, in EtesianEngine, build the flattened nets and their
RoutingPads *after* uniquifying (through slaving bounding boxes).
This way we avoid the Occurrences problem described above.
* Bug: In Etesian, in EtesianEngine, invalidate the RoutingPad after
processing the placement so they are put into the right quadtree.
This problem is due to the fact that the RoutingPads do not belong
to the Instance that they refer. And when this instance is moved
around, she doesn't inform the RoutingPad that is has moved.
More software architecture design to review...
* Change: In Knik, in Vertex, add a "blocked" flag to signal disabled
vertexes in the grid (must not be used by the global router).
Modificate the Graph::getVertex() method so that when a vertex
is geometrically queried, if is a blocked one, return a non-blocked
neighbor. This mechanism is introduced to, at last, prevent the
global router to go *under* the pad in case of a commplete chip.
* New: In Katabatic, in AutoSegment, a new state has been added: "reduced".
A reduced segment is in the same layer as it's perpandiculars.
To be reduced, a segments has to be connected on source & target to
AutoContactTurn, both of the perpandiculars must be of the same layer
(below or above) and it's length must not exceed one pitch in the
perpandicular direction.
To reduce an AutoSegment, call ::reduce() and to revert the state,
call ::raise(). Two associated predicates are associated:
::canReduce() and ::mustRaise().
Note: No two adjacent segments can be reduced at the same time.
* Bug: In Katabatic, in GCellTopology, add a new method ::doRp_AccessPad()
to connect to the pads. Create wiring, fixed and non managed by
Katabatic, to connect the pad connector layer to the lowest routing
layers (depth 1 & 2). The former implementation was sometimes leading
to gaps (sheared contact) that *must not* occurs during the building
stage.
Remark: This bug did put under the light the fact that the initial
wiring must be created without gaps. Gaps are closed by making doglegs
on contacts. But this mechanism could only work when the database if
fully initialised (the cache is up to date). Otherwise various problems
arise, in the canonization process for example.
* New: In Katabatic, in AutoContactTerminal::getNativeConstraintBox(),
when anchored on a RoutingPad, now take account the potential rotation
of the Path's transformation. Here again, for the chip's pads.
* New: In Kite, support for reduced AutoSegment. TrackSegment associateds
to reduced AutoSegment are *not* inserted into track to become
effectively invisibles. When a segment becomes reduced, a TrackEvent
is generated to remove it. Conversely when it is raised a RoutingEvent
is created/rescheduled to insert it. All this is mostly managed inside
the Session::revalidate() method.
* New: In Kite, in KiteEngine::createGlobalGraph(), in case of a chip,
mark all global routing vertexes (Knik) that are under a pad, as blockeds.
* Bug: In Cumulus, in PadsCorona.Side.getAxis(), inversion between X and
Y coordinate of the chip size. Did not show until a non-square chip
was routed (i.e. our MIPS R3000).
* Change: In Stratus1, in st_placement.py add the ClockBuffer class for
backward compatibility with the MIPS32 bench. Have to review this
functionnality coming from the deprecated placeAndroute.py.
In st_instance.py, no longer creates the Plug ring of a Net.
In my opinion it just clutter the display until the P&R is called.
Can re-enable later as an option (in Unicorn).
* Change: In Unicorn, in cgt.py, more reliable way of loading then running
user supplied scripts. Borrowed from alliance-checker-toolkit doChip.py .
* New: In CRL Core, created a LibraryManager widget. It provides a
composite information based on what is present, for each
Alliance library:
1. - A Cell in memory, without Catalog::State.
2. - A Catalog::State, with or whithout the Cell in memory.
3. - The files of the Cell in the librariy's directory.
4. - A file with a format referenced for one of the importers.
File type recognition is based *only* on the file extension,
so it may easily confused. Be careful about what you put in
the library's directory.
One of the big limitation is that it will not display Hurricane
libraries that do not have the AllianceLibrary extension.
This widget is put in a separate library <libmanager>, included
in the default CRLCORE_LIBRARIES.
* Change: In CRL Core, in State (through the loader), now sets the
InMemory flag (event if nobody uses it yet...). Display it in
the state _getString().
In AllianceFramework, new getAllianceLibraries() method.
In CatalogExtension, make the static method "get()" publicly
accessible, for sometimes we want the whole State.
* Bug: In vlsisapd, in Path, the pathcache was not rebuild when it
should, leading to incorrect results.
* New: In vlsisapd, in Path, added a listdir() method to access the
contents of a directory and a stat() method to poll the status
of a file/directory.
Rename the ".string()" method in ".toString()" to avoid
tricky name resolution with std::string, refactor in all the
other tools.
* Change: In Hurricane, in Controller, no longer oversize the fonts
of the table's headers.
* New: In Unicorn, in UnicornGui, integrate LibraryManager.
* Error messages are more explicit in Ap and Blif parsers
* Warns when not using tie cells
* New layer synonym in ApParser for easier format conversion
* Blif import is now on top
* New: In Hurricane, In NetAlias & Net, add an AliasList collection to
iterate over all the aliases names (this *not* include the main
net name).
* New: In Hurricane, In Cell, Instance & Net add support for cloning and
uniquification (update documentation).
All Cells that are uniquified from a given model are kept in an
Uniquify relation. This relation allows to get all the clones and
generate unique clone names by adding a "_uXX" suffix.
* Bug: In Hurricane, the Cell::_isFlattenLeaf attribute was not initialized
in the constructor.
* Change: In CRL Core, in AllianceFramework::getCell(), no longer destroy
a partially loaded Cell in case of parser failure, let the incomplete
Cell be.
* New: In CRL Core, in ApParser, if all the instances are placed, sets the
Cell::Placed flag.
* Change: In CRL Core, in BlifParser, complete rewrite of the parser.
Not so good an idea afterwards...
* New: In Etesian, uniquify the design before placing.
* Change: In Kite, display the list of unrouted wired after all other
statistics.
* New: In Hurricane, In Net & Cell, support for Net aliases names.
Use a structure based on a simple ring of NetAliasHook. The Net
holds a global map, sorted by names of all the aliases of all Nets.
Elements NetAliasesHook of the map are slaves of ring whose master
is an attribute of the Net (it is *not* in the map, as the primary
name of the Net).
In case of merge, the aliases of both Nets are merged and the
name of the merged one become an alias.
The Cell::getNet() looks in both the Net map and the aliases to
find a Net by name.
* Bug: In CRL Core, in coriolisInit.py, reoder the loading of the
configuration files so the real technology is read as early as
possible to set up the <gridsPerLambda> factor before any lambda
is actually computed...
* Bug: In CRL Core, in AcmSigda, do not try to fed the file when it
has failed to be opened. Throw a clean exception instead.
* New: In CRL Core, in Toolbox, add a NamingScheme object to convert
a design into VHDL compliant names (mainly from Blif/Verilog).
This is extensible in any case.
* New: In CRL Core, in BlifParser, slightly more informative warning
messages. Align the loading progress information on the other
parsers.
Add a capability to select which component of the design will
be returned, if there are more than one. Use the "." as separator.
For exemple you can request "Processor.Alu", which will load
the "Alu" component from the design in "Processor.blif".
To be able to save a Blif loaded design, systematically convert
all the name for VHDL compliance, as it is the format used by
the Coriolis native files (vst).
Export the Blif parser to the Python interface.
* New: In Kite, In NegociateWindow, add a counter of the number of
remaining events. Gives an idea of the ETA...
* New: In Unicorn, in cgt.by, add an option to load a Blif design from
the command line.
* New: In Cumulus, new RSave plugin to save both netlist & layout.
Partly redundant with the previous one. Have to better organize
that later.
Jean-Paul Chaput
Gabriel Gouvine