Commit Graph

2303 Commits

Author SHA1 Message Date
Jean-Paul Chaput f2a60768ca Export Entity::getId() to the Python interface. 2020-06-06 12:13:57 +02:00
Jean-Paul Chaput 7b1dab7742 Generate only one/zero cell in Blif parser.
* Change: In CRL::BlifParser, formerly, a zero/one cell was added for
    each vss/vdd direct connection, generating a huge flock of cells.
    Now only generate one per netlist.
      It can be discussed whether to old behavior is more desirable,
    it is a compromise between wire and area.
2020-06-06 12:13:29 +02:00
Jean-Paul Chaput ac04466090 Automatically try to load the layout of Terminal Cells.
* Change: In CRL::AllianceFramework::getCell(), if the Cell is marked
    as TerminalNetlist, then it may be a standard cell. So it's layout
    must be loaded. So now, systematically try to load the layout of
    netlist terminal cells.
2020-06-06 12:13:05 +02:00
Jean-Paul Chaput c6287c8d95 Correct Cell object detection while reading Oceane parameters.
* Bug: In karakaze/AnalogDesign.readParameters(), when asserting the
    type of dspec[0], it can either be a type (for analog devices) or
    a Cell object (*not* a type). So the issubclass may fails.
      Now check first if dspec[0] is an *instance* of Cell.
      This is an anisotropy in the type of the first element of
    the devicesSpecs table, but suppress one superfluous parameter.
2020-05-27 16:11:53 +02:00
Jean-Paul Chaput 4483766f34 Enabled support for track positionning in analog Transistor devices.
* New: In Analog, new Parameter derived class "StringParameter",
    to support strings. Also added to the Python interface.
* New: In Analog::Transistor, added StringParameters for specifying
    track positions. They are named "G.t", "S.t", "D.t" and "B.t".
* New: In Oroshi/wip_transistor.py, now read the track positionning
    devices parameters.
* New: In Karakaze/AnalogDesign.doDevice(), read an optional 14th
    parameter holding the track positions (example in ADC-SAR).
2020-05-11 15:59:45 +02:00
Jean-Paul Chaput 7dcd8e136a Suppress wrong errors/warnings in AnabaticEngine & AutoSegment.
* Bug: In Anabatic::AutoHorizontal & AutoVertical, in getGCells()
    method, do not display the "NULL GCell under" error message if the
    segment has just been created. It could on a "wrong" axis position
    so the line probing method may fail.
* Bug: In AnabaticEngine CTOR, if the "blockagenet" is created there,
    do not forget to set it's type to BLOCKAGE (to avoid later warnings).
* Bug: In Anabatic::NetBuilder::_load(), do not display a warning if the
    blockage net has no RoutingPads (it *must* not have one).
2020-05-10 17:09:33 +02:00
Jean-Paul Chaput faef4b182f Manage all devices in karakaze/AnalogDesign.readParameters().
* Change: In Karakaze/analogdesign/AnalogDesign.readParameters(),
    only Transistor and Capacitors where manageds. So when a devices in
    the dspec was from another type, it did issue an error.
      Now cleanly skip unsupported (yet) devices.
2020-05-10 11:47:30 +02:00
Jean-Paul Chaput b553aae8ad Correct icon sizing for normal definition display in BreakPointWidget. 2020-05-10 11:46:54 +02:00
Jean-Paul Chaput dc25159cd6 Bug fix, reset Cell flags after unrouting an analog design.
* Bug: In Bora::SlicingNode::clearGlobalRouting(), as we are unrouting the
    cell, the flags set up by Katana must be reset. The Cell is no longer
    "Terminal" and it's nets are "Un-flattened".
2020-04-30 00:38:32 +02:00
Jean-Paul Chaput bd4ace7cc8 Full update of the generated documentation. 2020-04-27 14:14:03 +02:00
Jean-Paul Chaput 2b4ee3abea Update docker config for Debian-10 / LibreSOC. 2020-04-27 14:11:44 +02:00
Jean-Paul Chaput 477c37643c Bug, In Session::_revalidateTopology(), iterate over an invalid vector!
* Bug: In Anabatic::Session::_revalidateTopology(), when iterating over
    _segmentInvalidateds, the vector can be modified. If it leads to a
    reallocation we end up on invalid iterators (using freed memory so
    sometimes with overwritten contents). Now, iterate with an index
    which warranty that we get a valid item at each iteration of the
    loop. And, of course, the vector is ensured to not shrink...
* Change: In Anabatic::Session::Session(), reserve (pre-allocate) at least
    1024 elements for all vectors. Mostly prevent the above bug and
    avoid constant reallocation.
2020-04-27 11:22:05 +02:00
Jean-Paul Chaput 3dbaea6aca Bug fix, restore the FreePDK 45 (real) support.
* Change: In CRL::LefParser::_macroCbk(), create a Catalog entry for the
    newly read MACRO (that is Cell) and sets the Logical, Physical,
    InMemory and TerminalNetlist flags.
* Bug: In CRL::LefParser::_siteCbk(), check for NULL cell gauge.
* New: In CRL::AllianceFramework, add setCellGauge(), to set the default
    cell gauge. Exported to Python.
* Change: In CRL/etc/common/technology.py, create variables for VIA
    layers, so we can modify their properties afterwards.
* New: In CRL/etc/node45/freepdk45, port the configuration files to the
    new Python "importable" format.
      Note: in kite.py, all the gauges (Routing & Cells) must be named
    "LEF.CoreSite" to please my LEF parser, so it can match the gauge
    name with the SITE name for standard cells.
* Bug: In Anabatic::NetBuilderVH::_do_2G(), forgotten to be reimplemented
    from the base class. Simply redirect to _do_xG().
* Change: In Katana::PowerRailsPlanes::PowerRailsplanes(), create plane
    from the layers in the RoutingGauge and their associated blockages
    instead of sweeping through all the basic layers.
      Allow to distinguish bewteen "METAL" (symbolic) and "metal" (real).
2020-04-27 10:34:19 +02:00
Jean-Paul Chaput e7bc4dc167 Bug fix, In Katana, do not remove AutoSegment conflicting with blockages.
* Bug: In Katana::NegociateWindow::createTrackSegment(), *fixed* AutoSegment
    in conflict with blockage where removeds. This was creating "holes"
    in the Anabatic articulated segment structure. Now just *don't*
    create the TrackSegment. Pass the regression tests, but not sure
    it is not generating problems elsewhere.
* New: AnabaticEngine::checkPlacement() to issue more clear errors about
    a defective placement.
2020-04-21 15:40:59 +02:00
Jean-Paul Chaput a4acb22e3c Bug fix, make the AP parser reentrant (NO static variables).
* Bug: In CRL::ApParser::_parseInstance(), the instance coordinates where
    stored in *static* variables (boo). Making the parser *not* reentrant.
    But in _parseInstance(), it can be recursively called through
    getCell() when an sub-instance layout was missing.
      Also make non-static all other variables in the various parser
    function.
2020-04-21 15:39:35 +02:00
Jean-Paul Chaput 0a664fed36 Support for multiple M1 connectors in GCells with M3 pins.
* Change: In Anabatic::NetBuilderHV(), in 2-3 globals plus one M3 pins,
    support up to 3 M1 connectors.
2020-04-20 20:53:49 +02:00
Jean-Paul Chaput 8978074fe7 Added new configuration in NetBuilderHV (for M3 Pins).
* New: In Anabatic::NetBuilderHV(), added configurations to manage
    one Pin M3 + one M1 terminal plus 2 & 3 globals:
      * _do_2G_1M1_1PinM3()
      * _do_3G_1M1_1PinM3()
    They were occuring for the first time in soclayout/experiment7
    in the "flat" approach.
* New: In Katana::runNegociate(), mark the newly routed netlist as
    "NetlistTerminal" so it is not placed and routed *again* when
    reused as an instance (mostly interract with Etesian).
2020-04-20 12:53:07 +02:00
Jean-Paul Chaput 010d9a3782 Clean policy of netlist (vst) and layout (ap) views recursive loading.
* Bug: In CRL::VstParserGrammar & VstParserScanner, when loading the
    instances models, we where loading both logical & physical views.
    This was causing cases of reentrency of the parser, with reset
    of the lexer static dictionary, leading to memory corruption.
      Now the identifiers are stored in the YaccState of each
    parsed cell and we only recursively call for the logical view.
* Change: In CRL::ApParser::_parseInstance(), recursively load the
    physical views as they are no longer loaded by the Vst parser.
* Change: In CRL::AllianceFramework::getCell(), sets the
    TerminalNetlist flag from the state (mode 'C' in CATAL) onto
    the cell.
* Change: In EtesianEngine::loadLeafcelllayouts(), new functions to
    load the layouts of the leaf cells if only the netlist has been
    loaded.
2020-04-17 11:28:47 +02:00
Jean-Paul Chaput 5a4d23f8fd Fix bad direction for segments in ApDriver.
* Bug: In CRL::ApDriver::DumpSegments(), reset the direction field to
    NULL between iterations so it is recomputed for each component and
    not keeping the first one ever guessed.
2020-04-15 10:42:38 +02:00
Jean-Paul Chaput 05c0907d5c Fix for Coriolis issue #6 (Katana core dump on ALU16).
* Bug: In Katana::AutoSegment::_preDestroy(), remove the segment from
    the source & target AutoContact cache.
      In LibreSOC/experiment7, weird placement caused fixed AutoSegment
    overlaping blockage to be deleteds. It seems to have never occured
    before (or at least, no ended up in core dump).
2020-04-15 10:41:46 +02:00
Jean-Paul Chaput 7e7e7170ba Improve symmetry management for analog designs.
* Bug: In Hurricane::NetRoutingState::getSymValue(), outrageously bad
    computation of the symmetric coordinate when the value was superior
    to the axis... (shame on me).
* Change: In Anabatic::Disjkstra::load(), for symmetrically paired nets,
    check that the axis of symmetry is *outside* the searchArea.
      Otherwise, the two mirrored areas overlaps and the two nets will
    unescapably be on top of each other. Issue a warning but still
    continue.
* Change: In Anabatic::Vertex::isRestricted(), allow perpandicular
    wire to go through struts or thin (less than one routing pitch)
    node. May have to recheck in the future and restrict to struts
    only.
* Bug: In Bora::HVSlicingNode::updateSymNetAxis(), rescursive call in
    child node was not systematically done (bad curly brace position).
      Also checks that symmetries are not empty before accessing the
    front element (one less core dump).
2020-04-10 12:15:23 +02:00
Jean-Paul Chaput 74e4544a55 Correct computation of H/W ratio in Bora (Igor Zivanovic).
* Bug: In Bora/SlicingDataModel, the division was done with integers,
    leading so there was a rounding *before* we casted to double.
      Now, use the BoxSet::getRatio() method and cast to double *before*
    dividing.
2020-04-08 15:09:20 +02:00
Jean-Paul Chaput a50b6ce317 More PEP8 compliant Python code. Start rewrite Python/C++ wrappers.
* Change: In CRL/helpers, cumulus/plugins, oroshi & karakaze,
    Move towards more Python PEP8 compliance:
      * All indentations sets to 4 spaces (in progress).
      * In plugins, remove messages about software collections
        and RHEL (too many case could wrongly lead to that).
	Instead systematically uses "helpers.io.catch()".
      * Put in lowercases all modules names. Note that C++ exported
        modules *keep* their Capitalized names (to preserve the
	identity with the C++ namespace).
      * When making import, use full path.
      * Rename the run function from "ScriptMain()" to "scriptMain()".
* Cleanup: In CRL/etc, remove obsoleted configuration files,
    the one ending in ".conf". Keep those who have not been ported
    to the new style yet.
* New: In Hurricane/src/configuration, first trial at replacing the
    C preprocessor macros by C++ templates. Applied first to configuration
    from VLSISAPD.
      This is unfinished business, just a limited demonstrator for now.
      It is installed as a separate Python library "Cfg2" which do not
    interact with the rest of Coriiolis.
      The end goal is to fully remove boost and merge VLSISAPD useful
    components directly inside Hurricane.
2020-04-08 11:24:42 +02:00
Jean-Paul Chaput e9ce33a857 Resistor integration.
* New: In Isobar::PyResistor, manage type RPOLYH and RPOLY2PH.
* Change: In Hurricane::Resistor, rename plate nets from "PIN1" and
    "PIN2" into "t1" and "t2" (try to respect uniform naming scheme).
* New: In Karakaze/AnalogDesign.py, support for reading Resistor
    parameters.
* New: In Orosshi, ResistorSnake.py imported from Mariam Tlili's work
    and associated Resistor.py to make parameter conversion.
      Currently we only uses vertical layout for resistors.
      Added METAL2 horizontal terminals for resistors.
2020-03-30 12:40:29 +02:00
Jean-Paul Chaput 2fa8016eaa Make Pin terminals really punctuals (bug shown in nmigen/ALU16). 2020-03-20 18:55:38 +01:00
Jean-Paul Chaput 654ae5b8a4 Added compile script for Yosys in docker (for Debian 10). 2020-03-20 15:07:41 +01:00
Jean-Paul Chaput 2af531991e Correct drive of the Pin in AP driver.
* Bug: In CRL::ApDriver::DumpSegments(), when saving RoutingPads build
    on Pin *not* at the top level (that is, Pin from an instance),
    use the pin's orientation to choose the segment type.
      * NORTH/SOUTH becomes a Vertical.
      * EAST/WEST becomes an Horizontal.
      Formerly, the segment direction was guessed only for the bounding
    box, leading to segments in incorrect directions leading to DRC
    errors (in nmigen/ALU16, net "b(10)").
* Bug: In CRL/symbolic/cmos/technology.py, forgotten import for
    WarningMessage.
2020-03-20 12:05:12 +01:00
Jean-Paul Chaput 837de500aa Compliance with Debian 10 Buster.
* Change: In all tools, FindTOOL.cmake, no longer use LIB_SUFFIX to
    search for tool libraries but try "lib64/" then "lib/".
* Change: In bootstrap/socInstaller.py, take Debian 10 into account.
* Change: In bootstrap/docker, move from Debian 9 to Debian 10.
2020-03-19 18:18:35 +01:00
Jean-Paul Chaput b07a472250 Dynamic detection of Coriolis2 library directory.
* Change: In bootstrap/coriolisEnv.py, no longer rely on the uname to
    choose the library directory (lib64 or lib), but instead look for
    those locations (lib64 gets precedence).
2020-03-15 23:58:31 +01:00
Jean-Paul Chaput a12d88040a Capacitor support, at last.
* Change: In Hurricane::DbU::setGridPerLambdas(), allow the grid per
    lambda to be even. Needed when using nsxlib libraries that are
    drawn using a "half lambda" (two lambdas to get an Alliance lambda).
* New: In Oroshi/python, integrated capacitors. Modifications and
    correction from Mariam's code:
    * No need to redefine __setattr__() on CapacitorUnit.
    * Pitch horizontally & vertically (symbolic routing tracks) the
      devices.
    * Put the horizontal access tracks on the routing pitch.
    * Sets the horitontal metal2 wires as external components and
      NOT the capacitor plates themselves.
    * Makes the size (plates) of the unit capacitor a multiple of
      the foundry grid, not a floating number...
    * Correct the net ownership of horizontal tracks in
      drawHRoutingTracks().
    * Simplification & put error management directly inside of
      __isCapacitorUnitOK__().
* New: In Karakaze/python/AnalogDesign, capacitor spec now include
    the dummy parameter.
2020-03-15 17:56:09 +01:00
Jean-Paul Chaput 2152811005 Correctly setup the breakpoint initial stop level to 1. 2020-03-10 12:22:03 +01:00
Jean-Paul Chaput dfe4d80b60 Clarify semantic of flatten Collections (walkthrough).
In the Cell/Instance hierarchy, the "terminal" and "leaf cell" concepts
where not clearly defined and partially overlapping. Now, "Terminal" is
the refer to the physical hierarchy (layout) and "TerminalNetlist" to
the logical hierarchy (netlist). The logical hierarchy can be less deep
than the physical one thanks to a Cell dedicated cell flags. Collections
related to the physical hierarchy keep their old names, the one related
to the logical hierarchy are renamed from "Leaf" to "TerminalNetlist".
The name "Leaf" was too ambiguous (leaf for *what* hierarchy).

* Change: In Hurricane::Device, set the "TerminalNetlist" flag once and
    for all. No need set it in all the derived classes again.
* New: In Hurricane::MultiCapacitor, added new parameter "dummy" to
    create dummies around the capacity matrix.
* Change: In Hurricane::Cell, remove "Leaf" related methods, replace
    them by "TerminalNetlist" one, especially Collections. Now we have
    two clear sets of Collections to walkthough the layout or the
    netlist.
      Change the "Terminal" flag into "TerminalNetlist".
* Change: In Hurricane::CellCollections, rename "Leaf" into
    "TerminalNetlist" collections and apply the new semantic to the
    locators.
* Change: In Hurricane::DataBase, Leaf to TerminalInstance renaming.
* Change: In Hurricane::DeepNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::HyperNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Instance, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Viewer::HierarchyInformations, Leaf to
    TerminalInstance renaming.
* Change: In CRL::AllianceFramework, Leaf to TerminalInstance renaming.
* Change: In CRL::Catalog, Leaf to TerminalInstance renaming.
* Change: In CRL::ApParser, Leaf to TerminalInstance renaming.
* Change: In EtesianEngine::AddFeeds, Leaf to TerminalInstance renaming.
* Bug: In EtesianEngine::resetPlacement, move there the loop over
    non terminal netlist instances to flag fully placed sub-blocks
    as terminal for the netlist. Only then remove the feed cells
    from unplaced instances. Previously, the feed cells where stripped
    even from already placed instances.
* Change: In Katana, Leaf to TerminalInstance renaming.
* Bug: In Bora::PyDSlicingNode, allow the range parameter to be the
    Python None object when we do not want to pass one but need to
    have it as positional parameter.
* Change: In Cumulus/clocktree/ClockTree.py, Leaf to TerminalInstance
    renaming.
2020-03-10 12:10:53 +01:00
Mariam Tlili e2d6929fbe Merge branch 'devel' of gitlab.lip6.fr:vlsi-eda/coriolis into devel
Conflicts:
	oroshi/python/CapacitorRoutedSingle.py
        Hidden tabulations remaining
2020-03-06 17:53:01 +01:00
Mariam Tlili 7281129850 Latest Capacitor corrections by Mariam. 2020-03-06 17:48:42 +01:00
Jean-Paul Chaput f3d5712afd Merge branch 'remove_env' into 'devel'
Allow to remove the Coriolis environment.

See merge request vlsi-eda/coriolis!1
2020-03-05 10:18:14 +01:00
Jean-Paul Chaput 59ee8358ca First working recursive place & route (Libre-SOC ALU16 benchmark).
* New: In Hurricane::Cell::isLeaf(), a leaf cell was defined as one
    without instances. Now it can be software defined with the
    "FlattenLeaf" state. If it is flagged "flatten leaf" is will be
    considered as a leaf by the trans-hierarchical walkthrough.
      This flag is also set for Cells in the Alliance CATAL.
* New: In Hurricane::Cell_LeafInstanceOccurrences::progress(), add a
    test to prune leaf cells.
* Bug: In Hurricane::getComponentOccurrences(), when calling the
    locator constructor, the "withLeafCells" argument was forgotten
    and was getting the value of "doExtraction" (wich, fortunately,
    was the same).
* Change: In Hurricane::HypreNet_LeafPlugOccurrences::progress(),
    prune the leaf cells instead of the terminal ones.
* Change: In Hurricane::HypreNet_ComponentOccurrences::progress(),
    prune the leaf cells instead of the terminal ones.
* New: In Hurricane::Cell, add a "useFlattenLeaf" mode to take into
    account or ignore the "FlattenLeaf" flag when doing trans-
    hierarchical walkthrough.
      Not sure if it shouldn't be systematic.
* New: In Etesian::toColoquinte() and other, activate the "FlattenLeaf"
    mode for all walkthough. So we can stop at already placed sub-blocks.
* Bug: In Etesian::toColoquinte(), when placed sub-block where present,
    the number of instances was under estimated, so the instance array
    was oversized and the end went unitialized. So we were getting all
    kind of strange behavior from Coloquinte...
      Now throw an exception if the number of instances differs from
    the computed size.
* Bug: In Etesian::toColoquinte(), as for the instance array, now
    correctly compute the size with the ecluded nets (supplies, clocks).
* Bug: In Etesian::resetPlacement(), event if the Cell is unplaced,
    go through the instance list to remove the potential feed cells.
      The netlist is written back after placement *with* the feed
    cells added. So, when loading again, they where cluttering the
    netlist and giving feed redefintions warning. They also generated
    erratic behaviors.
* New: In Anabatic::NetBuilderHV, added configurations for:
    * 1G_1M1_1PinM3
    * 1G_xM1_1PinM2
    * 2G_xM1_1PinM2
    * doRp_AccessNorthPin
* New: In Anabatic::NetBuilderHV, added Pin management in SingleGCell.
* Bug: In Anabatic::NetBuilderHV::_do_xG_1PinM3(), the North/South
    global routing configuration was forgotten (only East/West).
* Bug: In Katana::TrackFixedSegment, the blockage net was a static
    variable initialized at the first run. So we were getting stuck
    with the blockage net of the first cell to be routed. Of course,
    it did show only when Katana was run multiple times in the same
    process.
2020-03-04 00:50:18 +01:00
Jean-Paul Chaput 757b95343b Support for full Database clear & restart.
* New: In CRL/etc/node600/phenitec, ported configuration of Phenitec 0.6um
    Compliant with DataBase reset.
* New: In CRL/python/helpers, added function "unloadUserSettings()" to
    unload Python modules prior to a full reset.
      Added "resetCoriolis()" to perform full DataBase reset.
* Change: In CRL::AllianceFramework, make it a derived class of DBo so
    the destroy() is now provided.
* Bug: In CRL::AllianceFramework::getCell(), do not attempt any load if
    the library list is empty. Should never occur except in case of a
    botched databse reset.
* New: In CRL::AllianceFramework, new method "saveCATAL()" to write back
    the catalog of a library and "saveCells()" to write back the cells.
      Note: only cells actually loaded in memory will be write back.
* New: In CRL::Catalog, add method "saveToFile()" to write back the CATAL
    of a library.
* Change: In CRL::ParserDriver, replace "const string&" by "string"
    (improved string support of the GNU STL).
* Change: In CRL::ParserSlot, use string instead of Name.
* Change: In CRL::ApParser, make _layerInformation an ordinary attribute
    instead of a static one. This allow for it's correct resetting
    across databas resets.
* Change: In CRL::VstParserGrammar, reinitialize Vst::framework at each
    parser call. Needed to support database reset.

* New: In Hurricane::DBo, add an object counter to be sure that when
    we perform a reset, no remaining DBo is allocated. This is different
    of the object id which is ever increasing.
      Note that, at reset, we check against "1" remaining element as at
    this point only Database is still allocated.
      Add a new "resetId()" method. MUST NEVER BE CALLED except by
    DataBase::_preDestroy().
* New: In Hurricane::Database, new clear() method to remove the Cells
    of all the libraries in reverse hierarchical depth order.
    Make use of the new CellsSort class.
* Change: In Hurricane::DataBase::_preDestroy(), call "clear()" and
    DBo::resetId().
* Change: In Hurricane::Breakpoint, change the default callback to be
    a static function. So we can restore it later.
* Bug: In Hurricane::Instance::_preDestroy(), there was yet another
    loop of deletion over a collection for the shared pathes.
      Replace it by the repetitive deletion of the first element.
* Bug: In Hurricane::Net::_preDestroy(), RoutingPads must be destroyed
    prior to any other component.
* New: In Hurricane::ColorScale, add a "qtFree()" method for freeing
    the Qt Brush, Pen & Color.
* New: In Hurricane::DrawingStyle, add a "qtFree()" method for freeing
    the Qt Brush, Pen & Color.
* New: In Hurricane::Graphics, add a "disable()" method to call the
    various "qtFree()" of the sub-objects.
2020-02-29 16:55:14 +01:00
Jean-Paul Chaput eab4a4aa7f In BlifParser, correct management of alias to $true/$false for terminals.
* Bug: In CRL/BlifParser::Model::mergeAlias(), when a signal is aliased
    toward $true or $false in a Blif file (through a ".name" statement),
    it was directly merged to "vdd" (resp. "vss"), and if it is an
    external signal, this leads to its removal, potentially making "hole"
    in its interface.
      Now, create a gate zero or one for each tied up/low signal. This
    way the interface is fully kept. At the cost of some supplemental
    gates.
2020-02-24 18:58:48 +01:00
Staf Verhaegen 19ed35784c Allow to remove the Coriolis environment.
coriolisEnv.py now has a --remove option to allow to remove Coriolis settings from the shell environment.
2020-02-24 13:37:28 +01:00
Jean-Paul Chaput 5d968b0997 Add nMigen to docker & chroot images.
* New: In bootsrap/docker:
    * install python3/nMigen tool in all environment.
    * Add a new image on top of the coriolis one to have a shell
      (with X11 connexion to the host system).
    * Upgrade Yosys to 0.9.
    * Correct integration of allianceInstaller.sh in socInstaller.py.
    * Add a chroot mode to socInstaler.py (for Debian 9 chrooted).
    * Allow benchs to be run separately.
2020-02-20 00:45:52 +01:00
Jean-Paul Chaput 1d05f1278e Added 3G + 5M1 configuration in NetBuilder. Never occured before. 2020-02-19 23:24:52 +01:00
Jean-Paul Chaput 2d91df1d47 Update doc link for the new Pelican generated one. 2020-02-10 13:38:06 +01:00
Jean-Paul Chaput 068740601c Created docker images to check rebuild on various distributions.
* New: In bootstrap/docker, paraphernalia to rebuild and check Coriolis
    for Debian 9, Ubuntu 18 & SL 7 on pristine systems. Added scripts
    to rebuild Alliance as well and perform the alliance-check-toolkit
    regression tests.
* Change: Updated installation documentation. Added a section for docker.
2020-02-09 18:18:42 +01:00
Jean-Paul Chaput 6ea7a6f1f3 Forgotten socInstaller.py file in previous commit, stupid! 2020-02-09 11:45:04 +01:00
Jean-Paul Chaput 2f81f454e6 Updating socInstaller.py for docker cases.
* New: In bootstrap/socInstaller.py, partial redesign of group of commands
    to better handles all the cases. Added support for docker context,
    and added Alliance compilation "alongside" Coriolis (merged install
    tree).
* Change: In bootstrap/coriolisEnv.py, when run in a docker container we
    no longer can trust the kernel name to guess the OS, as the kernel is
    the one of the host and not the docker guest. This was causing problem
    for determining the Python site-package directory. Now just check all
    possible locations and stop at the first directory found.
2020-02-09 00:47:11 +01:00
Jean-Paul Chaput 0dc98dfce3 Migrating doc from Sphinx towards Pelican.
* Change: In documentation, now generate the overall documentation using
    Pelican instead of Sphinx. This allows to have an unified approach
    between the coriolis.lip6.fr website and the local documentation.
      So we keep using "only" two doc generators: doxygen & Pelican.
2020-02-03 17:44:15 +01:00
Jean-Paul Chaput 803c5f8ada Updated PDFs, February 03, 2020 (15:12). 2020-02-03 15:12:04 +01:00
Jean-Paul Chaput 057501a8df Capacitor & resistor integration in the Slicing Tree.
* New: In Karakaze/Oceane.py, now also read capacitor & resistors parameters.
    In AnalogDesign.readParameters(), get the capacitor parameters from
    Oceane into the "device spec" (dspec). Translate form OSI unit to
    Coriolis units (F -> pF).
* Bug: In Bora::NodeSets::create(), Capacitor matrix parameters where never
    read due to a misplaced curly brace (at the matrixRange dynamic_cast<>
    test).
* Change: In Bora/PyDSlicingNode, now check that the parameter is either
    a StepParameterRange or a MatrixParameterRange.
      Also add a check that the Instance name exists...
* Bug: In Bora::SlicingPlotWidget::updateSelectedPoint(), as we display
    only the transistor parameters in dynamic labels, do not forget to
    skip resistor and capacitor. Otherwise we end up in out of bound
    access in the vector of labels.
2020-01-23 14:07:19 +01:00
Jean-Paul Chaput eea67a9111 Added static bloat profile in Katana.
* Change: In bootstrap/FindBoostrap.cmake, remove the -fsanitize=address
    as it requires the "san" librarie which may be difficult to install.
* Change: In CRL/symbolic/cmos45/kite.py, decrease the METAL3 pitch from
    10l to 8l. This is for testing with 4 routing metal only technology
    like AMS c35b4 symbolic.
* Change: In Katana/BloatProfile, add static bloat option, that is, only
    cell bloated in the first pass will be bloated again in subsequent
    ones.
      Add a "katana.bloatOverloadAdd" parameter to more easily control the
    amount added to the computed overload.
* Change: In Oroshi, start integration of multi capacitors as generator.
    Translate generator parameter into CapacitorStack ones. Add code for
    routing unit capacitor.
2020-01-23 14:03:59 +01:00
Jean-Paul Chaput 26610ba80c Fixe bad Python exception catch for C-launched scripts.
* In Hurricane::Viewer::Script::runFunction() & callFunction(), when the
    script returns NULL, do not immediately return but first check if an
    exception has been set. If so, print it *then* clear it.
      Due to not clearing the exception we where seeing one later with
    no relation to the true problem.
* In Oroshi/python/Rules.py, a bad test structure was discarting all the
    "no layer rule with physical length" in the loading process. It was
    blocked by the physical unit rule special cases.
2019-12-19 01:18:11 +01:00