* New: In Katana::Configuration, two new parameters hTrackReservedMin
and same for V. Forced decrease of all edges capacities, to use
when the global router is too optimistic...
* New: In EtesianEngine::setDefaultAb(), add computation of AB when
using fixed width (fixed height) was already available.
Add attribute management for the fixed width along with a
Python export.
* New: In Anabatic::AutoContactTerminal, new method "isOnPin()" to
know if the terminal contact is on a Pin. Introduced in base
class.
* Bug: In Anabatic::AutoHorizontal::_canSlacken() & AutoVertical,
forbid slackening from a Pin. As Pin are all on the side of the
cell (aligneds) and the perpandicular segment will be locked on
the Pin, it generates intractable overlaps for the router.
* Bug: In Anabatic::Configuration::selectRpComponent(), always select
the Pin as the best component. It is mandatory for a block that
we pick up the terminal at the periphery and not one deep inside
the block.
* Bug: In Hurricane::RoutingPad::setOnBestcomponent(), same rule as
in Anabatic, if there is any, the Pin must always be the best
RoutingPad component.
* New: In CRL/helpers/overlay.py, CfgCache class to hold a set of
configuration parameters and apply it on demand. It has a
different behavior than Configuration.
* Bug: In Hurricane/Commons.h, modify the getRecord<>() templates so
that for both vector<Element> and vector<Element*>, the individual
record created for each element are donne with pointers. That is,
for the vector<Element> case, we take a pointer.
As a general policy, except for the POD types, always use pointers
or references to data in the records/inspector. Never uses values
that can call the copy constructor.
Suppress INSPECTOR_PV_SUPPORT() macro, keep only
INSPECTOR_PR_SUPPORT().
Provide value support only for getString<>() template.
This value & copy constructor problem was causing a crash when
trying to inspect Hurricane::AnalogCellExtension.
* New: In Hurricane::Technology, change the API of the PhysicalRule,
now we can only create/get PhysicalRule, but setting the value of
the rule itself must be done on the rule.
Enhance PhysicalRule to provide for stepped rules, non isotropic
and ratio rules.
Merge TwoLayersPhysicalrule in PhysicalRule, much simpler to
suppress the management of derived classes. That means that we
loose a little memory as some fields are mutually exclusive.
Not a problem considering that there will not be so many of thoses
objects.
* New: In CRL/helpers.analogtechno.py, enhanced DTR support for rules
like:
('minSpacing' , 'metal1', ((0.4,20.0), (0.8,1000.0)), Length, 'REF.1')
('minEnclosure', 'metal1', 'cut1', (0.2,0.3) , Length, 'REF.2')
('minDensity' , 'metal1', 0.30 , Unit , 'REF.3')
The DTR parser has been updated, but not the oroshi.dtr Rule
cache for analog components. Given a rule name, the value used
will be the horizontal one of the first step.
* Change: In hurricane/doc/hurricane, re-generate the documentation
with updated support for Technology & PhysicalRule.
* Bug: In EtesianEngine::place(), reset the placement *only* if we are
*not* placing a sub-block *and* the top cell abutment box is empty.
* Bug: In EtesianEngine::place(), set the instance placement status of
all intermediate instances to PLACED, so the AP driver will save
them (we were having partially saved layout when using hierarchical
designs).
* Bug: In EtesianEngine::resetPlacement(), reset the PLACED flag and
the abutment box on the top cell or sub-block to be placed.
* Change: In CRL/helpers/__init__.py, to ensure a complete restart of
the database the __init__.py must be called again, but it's not the
case with reload() (see Python doc). So helpers.resetCoriolis()
must explicitly removes the Coriolis related Python modules from
sys.modules (calling "del sys.modules[moduleName]").
That list of Coriolis Python modules is built by calling
helpers.tagConfModules(), it will tag all modules added to
sys.modules since startup. It will remove (much) more than
Coriolis modules, but that should be ok.
* Change: In CRL/etc/{node*,symbolic}/TECH/__init__.py, add a call to
helpers.tagConfModules() for the techno modules to be erased on
reset.
* New: In Anabatic::NetBuilder, some GCells configurations of Libre-SOC
"test_issuer" (soclayout/experiments9) did have more METAL1 terminals
than was though possible. Just added more entries in the connexity
table for bigger numbers of METAL1. No new configuration was added,
used the already existing ones.
* Bug: In cumulus/plugins/rsave.py, use "Cell.isTerminalNetlist()"
instead of "Cell.isTerminal()" to find the hierarchical stop
points.
If the root cell to be saved is itself a *terminal netlist*
one, save it anyway. The top level *must* be saved regardless to
it's status.
* Bug: In CRL/Vhdl::VectorPortMap::toVhdlPortMap(), two problems:
1. Bad condition for the use of VstUseConcat. Must be used *only*
when there is more than *one* mapped name.
2. Missing case, when there is exactly *one* mapped name, that
means that we have one full width vector to vector assignement.
There may be another weakness here, for the portmap we assumes
that both vector are mapped in the *same* direction (which is
"downto" by our convention).
3. In the "bit by bit mapping case" (every bits of the vector are
differents bits), use the "signal + bit index" name instead of
juste the signal name (i.e. full width).
Solves the Libre-SOC/soclayout/experiment6/fpmul64 problem, now
we can avoid the YOSYS_FLATTEN.
* Change: In Vhdl:::Signal::toVhdlPort(), in Alliance VST signal with
undefined directions are typed "linkage". This may not be compatible
with vasy, so allow to replace them by "in".
* New: In CRL::Catalog::State, add a new flag VstNoLinkage to tell if
the VST driver should not use the "linkage" type.
* Change: In Vhdl::Entity, add a VstNoLinkage flag to disable the use
of the "linkage" type.
* Change: In Hurricane::ExceptionWidget,
- Use a QTextLabel instead of a QLabel, make it "look like" a QLabel.
- Always display using text mode. Not HTML (to preserve indentation).
- Make the text of the error message selectable.
- Make it resizable.
* New: In vlsisapd/PyConfiguration, add asDouble() to the Parameter
Python wrapper.
* New: In CRLCore/helpers/overlay, add support for float parameters
in configuratuon.
* Bug: In CRL::VectorPortmap::toVhdlPortMap(), unconnected bits where
correctly checkeds for multi-bits vectors (both ordered and holed),
but not for mono-bits connections (ONE bit of a vector).
* New: In CRL::NamingScheme, add a flag VstNoLowerCase, and its
management it in the Verilog to VHDL converter.
* Change: In CRL::BlifParser::Model::toVhdlModels(), disable the
lowercasing of identifiers. We shouldn't apply Alliance VHDL
subset constraits when reading blif files. So we will see
uppercase identifiers in Coriolis.
* Change: In CRL::VstParser, no longer lowercase identifiers that
are *not* VHDL keywords. Uppercases are legals in VHDL...
* New: In CRL::Catalog::State, add a new flag VstNoLowerCase to
tell if the VST driver should keep the uppercases.
* Change: In CRL::VhdlEntity, add a VstNolowerCase flag to disable
the lowercasing.
* Change: In CRL::vstDriver, lower case the file name if needed.
remove the previously opened filename if it differs from the
lowercased one.
* Change: In UnicornGui CTOR, disable VHDL enforcement for the
Blif parser.
* In cumulus.plugins.matrixplacer.py, BETA plugins for getting back
matrix-like netlists placement. This plugin is configured *ONLY*
for Libre-SOC FU-FU matrix 30x30.
* Change: In CRL::BlifParser, formerly, a zero/one cell was added for
each vss/vdd direct connection, generating a huge flock of cells.
Now only generate one per netlist.
It can be discussed whether to old behavior is more desirable,
it is a compromise between wire and area.
* Change: In CRL::AllianceFramework::getCell(), if the Cell is marked
as TerminalNetlist, then it may be a standard cell. So it's layout
must be loaded. So now, systematically try to load the layout of
netlist terminal cells.
* Bug: In karakaze/AnalogDesign.readParameters(), when asserting the
type of dspec[0], it can either be a type (for analog devices) or
a Cell object (*not* a type). So the issubclass may fails.
Now check first if dspec[0] is an *instance* of Cell.
This is an anisotropy in the type of the first element of
the devicesSpecs table, but suppress one superfluous parameter.
* New: In Analog, new Parameter derived class "StringParameter",
to support strings. Also added to the Python interface.
* New: In Analog::Transistor, added StringParameters for specifying
track positions. They are named "G.t", "S.t", "D.t" and "B.t".
* New: In Oroshi/wip_transistor.py, now read the track positionning
devices parameters.
* New: In Karakaze/AnalogDesign.doDevice(), read an optional 14th
parameter holding the track positions (example in ADC-SAR).
* Bug: In Anabatic::AutoHorizontal & AutoVertical, in getGCells()
method, do not display the "NULL GCell under" error message if the
segment has just been created. It could on a "wrong" axis position
so the line probing method may fail.
* Bug: In AnabaticEngine CTOR, if the "blockagenet" is created there,
do not forget to set it's type to BLOCKAGE (to avoid later warnings).
* Bug: In Anabatic::NetBuilder::_load(), do not display a warning if the
blockage net has no RoutingPads (it *must* not have one).
* Change: In Karakaze/analogdesign/AnalogDesign.readParameters(),
only Transistor and Capacitors where manageds. So when a devices in
the dspec was from another type, it did issue an error.
Now cleanly skip unsupported (yet) devices.
* Bug: In Bora::SlicingNode::clearGlobalRouting(), as we are unrouting the
cell, the flags set up by Katana must be reset. The Cell is no longer
"Terminal" and it's nets are "Un-flattened".
* Bug: In Anabatic::Session::_revalidateTopology(), when iterating over
_segmentInvalidateds, the vector can be modified. If it leads to a
reallocation we end up on invalid iterators (using freed memory so
sometimes with overwritten contents). Now, iterate with an index
which warranty that we get a valid item at each iteration of the
loop. And, of course, the vector is ensured to not shrink...
* Change: In Anabatic::Session::Session(), reserve (pre-allocate) at least
1024 elements for all vectors. Mostly prevent the above bug and
avoid constant reallocation.
* Change: In CRL::LefParser::_macroCbk(), create a Catalog entry for the
newly read MACRO (that is Cell) and sets the Logical, Physical,
InMemory and TerminalNetlist flags.
* Bug: In CRL::LefParser::_siteCbk(), check for NULL cell gauge.
* New: In CRL::AllianceFramework, add setCellGauge(), to set the default
cell gauge. Exported to Python.
* Change: In CRL/etc/common/technology.py, create variables for VIA
layers, so we can modify their properties afterwards.
* New: In CRL/etc/node45/freepdk45, port the configuration files to the
new Python "importable" format.
Note: in kite.py, all the gauges (Routing & Cells) must be named
"LEF.CoreSite" to please my LEF parser, so it can match the gauge
name with the SITE name for standard cells.
* Bug: In Anabatic::NetBuilderVH::_do_2G(), forgotten to be reimplemented
from the base class. Simply redirect to _do_xG().
* Change: In Katana::PowerRailsPlanes::PowerRailsplanes(), create plane
from the layers in the RoutingGauge and their associated blockages
instead of sweeping through all the basic layers.
Allow to distinguish bewteen "METAL" (symbolic) and "metal" (real).
* Bug: In Katana::NegociateWindow::createTrackSegment(), *fixed* AutoSegment
in conflict with blockage where removeds. This was creating "holes"
in the Anabatic articulated segment structure. Now just *don't*
create the TrackSegment. Pass the regression tests, but not sure
it is not generating problems elsewhere.
* New: AnabaticEngine::checkPlacement() to issue more clear errors about
a defective placement.
Jean-Paul Chaput
Marie-Minerve Louërat