coriolis/katana/src/GraphicKatanaEngine.cpp

494 lines
16 KiB
C++
Raw Normal View History

Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// -*- C++ -*-
//
// This file is part of the Coriolis Software.
// Copyright (c) UPMC 2008-2018, All Rights Reserved
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
//
// +-----------------------------------------------------------------+
// | C O R I O L I S |
// | K i t e - D e t a i l e d R o u t e r |
// | |
// | Author : Jean-Paul Chaput |
// | E-mail : Jean-Paul.Chaput@lip6.fr |
// | =============================================================== |
// | C++ Header : "./GraphicKatanaEngine.cpp" |
// +-----------------------------------------------------------------+
#include <boost/bind.hpp>
#include <QAction>
#include <QMenu>
#include <QMenuBar>
#include <QApplication>
#include <hurricane/Warning.h>
#include <hurricane/Error.h>
#include <hurricane/Breakpoint.h>
#include <hurricane/DebugSession.h>
#include <hurricane/Go.h>
#include <hurricane/Net.h>
#include <hurricane/Cell.h>
#include <hurricane/viewer/Graphics.h>
#include <hurricane/viewer/CellWidget.h>
#include <hurricane/viewer/CellViewer.h>
#include <hurricane/viewer/ControllerWidget.h>
#include <hurricane/viewer/ExceptionWidget.h>
#include <crlcore/Utilities.h>
#include <crlcore/AllianceFramework.h>
#include <anabatic/GCell.h>
#include <katana/GraphicKatanaEngine.h>
namespace Katana {
using namespace std;
using Hurricane::Error;
using Hurricane::Warning;
using Hurricane::Exception;
using Hurricane::Breakpoint;
using Hurricane::DebugSession;
using Hurricane::Point;
using Hurricane::Entity;
using Hurricane::Net;
using Hurricane::Graphics;
using Hurricane::ColorScale;
using Hurricane::DisplayStyle;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Hurricane::ControllerWidget;
using Hurricane::ExceptionWidget;
using CRL::Catalog;
using CRL::AllianceFramework;
using Anabatic::Edge;
using Anabatic::GCell;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
size_t GraphicKatanaEngine::_references = 0;
GraphicKatanaEngine* GraphicKatanaEngine::_singleton = NULL;
void GraphicKatanaEngine::initGCell ( CellWidget* widget )
{
widget->getDrawingPlanes().setPen( Qt::NoPen );
KatanaEngine* katana = KatanaEngine::get( widget->getCell() );
if (katana) katana->setDensityMode( GCell::MaxDensity );
}
void GraphicKatanaEngine::drawGCell ( CellWidget* widget
, const Go* go
, const BasicLayer* basicLayer
, const Box& box
, const Transformation& transformation
)
{
const GCell* gcell = static_cast<const GCell*>(go);
QPainter& painter = widget->getPainter();
QPen pen = Graphics::getPen ("Anabatic::GCell",widget->getDarkening());
Box bb = gcell->getBoundingBox();
QRect pixelBb = widget->dbuToScreenRect(bb);
if (GCell::getDisplayMode() == GCell::Density) {
uint32_t density = (unsigned int)( 255.0 * gcell->getDensity() );
if (density > 255) density = 255;
painter.setBrush( Graphics::getColorScale( ColorScale::Fire ).getBrush( density, widget->getDarkening() ) );
painter.drawRect( pixelBb );
} else {
int fontScale = 0;
int halfHeight = 20;
int halfWidth = 80;
if (widget->isPrinter()) {
fontScale = -5;
halfHeight = 9;
halfWidth = 39;
}
painter.setPen ( pen );
painter.setBrush( Graphics::getBrush("Anabatic::GCell",widget->getDarkening()) );
painter.drawRect( pixelBb );
if ( (pixelBb.width() > 2*halfWidth) and (pixelBb.height() > 2*halfHeight) ) {
QString text = QString("%1").arg(gcell->getId());
QFont font = Graphics::getFixedFont( QFont::Normal, false, false, fontScale );
painter.setFont(font);
pen.setWidth( 1 );
painter.setPen( pen );
painter.save ();
painter.translate( widget->dbuToScreenPoint(bb.getCenter().getX(), bb.getCenter().getY()) );
painter.drawRect ( QRect( -halfWidth, -halfHeight, 2*halfWidth, 2*halfHeight ) );
painter.drawText ( QRect( -halfWidth, -halfHeight, 2*halfWidth, 2*halfHeight )
, text
, QTextOption(Qt::AlignCenter)
);
painter.restore ();
}
}
}
void GraphicKatanaEngine::initEdge ( CellWidget* widget )
{
widget->getDrawingPlanes().setPen( Qt::NoPen );
}
void GraphicKatanaEngine::drawEdge ( CellWidget* widget
, const Go* go
, const BasicLayer* basicLayer
, const Box& box
, const Transformation& transformation
)
{
static QFont font = Graphics::getFixedFont( QFont::Bold );
static int fontHeight = QFontMetrics(font).height();
const Edge* edge = static_cast<const Edge*>(go);
if (edge) {
Box bb = edge->getBoundingBox();
uint32_t occupancy = 255;
//if (edge->getRealOccupancy() < edge->getCapacity())
// occupancy = (uint32_t)( 255.0 * ( (float)edge->getRealOccupancy() / (float)edge->getCapacity() ) );
float edgeOccupancy = edge->getEstimateOccupancy() + (float)edge->getRealOccupancy();
#define NORMAL_DENSITY_DISPLAY 1
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
#if NORMAL_DENSITY_DISPLAY
if ((unsigned int)edgeOccupancy <= edge->getCapacity())
occupancy = (uint32_t)( 255.0 * (edgeOccupancy / (float)edge->getCapacity()) );
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
#endif
#if HISTORIC_COST_DISPLAY
occupancy = (uint32_t)( 10.0 * edge->getHistoricCost() );
#endif
#if EDGE_OVERLOAD_DISPLAY
if ((unsigned int)edgeOccupancy <= edge->getCapacity())
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
occupancy = 0;
else
occupancy = (uint32_t)( 20.0 * ((unsigned int)edgeOccupancy - edge->getCapacity()) );
#endif
if (occupancy > 254) occupancy = 254;
QPainter& painter = widget->getPainter();
if ((unsigned int)edgeOccupancy > edge->getCapacity()) {
QColor color ( Qt::cyan );
painter.setPen( DisplayStyle::darken(color,widget->getDarkening()) );
}
QBrush brush = QBrush( Qt::white, Qt::DiagCrossPattern );
if (edge->getCapacity() > 0.0)
brush = Graphics::getColorScale( ColorScale::Fire ).getBrush( occupancy, widget->getDarkening() );
QRect pixelBb = widget->dbuToScreenRect( bb, false);
painter.setPen( Qt::NoPen );
painter.setBrush( brush );
painter.drawRect( pixelBb );
if (fontHeight > ((edge->isHorizontal()) ? pixelBb.height() : pixelBb.width()) + 4) return;
//QString text = QString("%1/%2").arg(edge->getRealOccupancy()).arg(edge->getCapacity());
QString text = QString("%1/%2[-%3] %4")
.arg( edgeOccupancy )
Support for density estimation for the global router. * Bug: In Anabatic::Edge::getDistance(), remove the additionnal 0.1 added to horizontal edges. This was for testing before the hScaling parameter was added (to the distance computation in GlobalRoute). * New: Anabatic::Path_Edges, collectio to walkthrough all the edges between two node. More complex than in Knik as we are no longer using a regular grid. We may request the north bound path or south bound path. Collection returned by AnabaticEngine::getEdgesUnderPath(). * New: In Anabatic::NetData, add a new flag GlobalEstimated to tell if the net RMST has been computed (using FLUTE). * New: In Anabatic::PriorityQueue, used to sort Vertexes by increasing distances, add a new criterion to be used in case of distance equality. The attractor which should be the center of the search area. In case of equality, we choose the Vertex which is closest to the attractor. Give a small improvement, and more "dendritic" trees. For a more simple implementation of the comparison function it is made as a static member (so no two Dijkstra objects at the same time...). * Change: In Anabatic::Edge, make the estimate occupance a floating point number instead of an integer. * New: In Katana::GlobalRoute, finally implement the estimated congestion driven router. Net RMST estimated using FLUTE. Use the historic cost from Knik implementation and not the one given in Damien's thesis, which seems not be the same and a bit strange. * New: In KatanaEngine, add the ability to exclude nets from routing, and export it to Python.
2019-02-26 13:03:53 -06:00
.arg( edge->getCapacity() )
.arg( edge->getReservedCapacity() )
Support for density estimation for the global router. * Bug: In Anabatic::Edge::getDistance(), remove the additionnal 0.1 added to horizontal edges. This was for testing before the hScaling parameter was added (to the distance computation in GlobalRoute). * New: Anabatic::Path_Edges, collectio to walkthrough all the edges between two node. More complex than in Knik as we are no longer using a regular grid. We may request the north bound path or south bound path. Collection returned by AnabaticEngine::getEdgesUnderPath(). * New: In Anabatic::NetData, add a new flag GlobalEstimated to tell if the net RMST has been computed (using FLUTE). * New: In Anabatic::PriorityQueue, used to sort Vertexes by increasing distances, add a new criterion to be used in case of distance equality. The attractor which should be the center of the search area. In case of equality, we choose the Vertex which is closest to the attractor. Give a small improvement, and more "dendritic" trees. For a more simple implementation of the comparison function it is made as a static member (so no two Dijkstra objects at the same time...). * Change: In Anabatic::Edge, make the estimate occupance a floating point number instead of an integer. * New: In Katana::GlobalRoute, finally implement the estimated congestion driven router. Net RMST estimated using FLUTE. Use the historic cost from Knik implementation and not the one given in Damien's thesis, which seems not be the same and a bit strange. * New: In KatanaEngine, add the ability to exclude nets from routing, and export it to Python.
2019-02-26 13:03:53 -06:00
.arg( edge->getHistoricCost() );
QColor color ( (occupancy > 170) ? Qt::black : Qt::white );
painter.setPen (DisplayStyle::darken(color,widget->getDarkening()));
painter.setFont(font);
if (edge->isVertical()) {
painter.save ();
painter.translate( widget->dbuToScreenPoint(bb.getXMin(), bb.getYMin()) );
painter.rotate ( -90 );
painter.drawText (QRect( 0
, 0
, widget->dbuToScreenLength(bb.getHeight())
, widget->dbuToScreenLength(bb.getWidth ()))
, text
, QTextOption(Qt::AlignCenter)
);
painter.restore ();
} else
painter.drawText( widget->dbuToScreenRect(bb,false ), text, QTextOption(Qt::AlignCenter) );
painter.setPen( Qt::NoPen );
}
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
KatanaEngine* GraphicKatanaEngine::createEngine ()
{
Cell* cell = getCell ();
KatanaEngine* katana = KatanaEngine::get( cell );
if (not katana) {
katana = KatanaEngine::create( cell );
katana->setPostEventCb( boost::bind(&GraphicKatanaEngine::postEvent,this) );
katana->setViewer( _viewer );
katana->printConfiguration();
katana->digitalInit();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
} else
cerr << Warning( "%s already has a Katana engine.", getString(cell).c_str() ) << endl;
return katana;
}
KatanaEngine* GraphicKatanaEngine::getForFramework ( uint32_t flags )
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{
// Currently, only one framework is avalaible: Alliance.
KatanaEngine* katana = KatanaEngine::get( getCell() );
if (katana) return katana;
if (flags & CreateEngine) {
katana = createEngine();
if (not katana)
throw Error( "Failed to create Katana engine on %s.", getString(getCell()).c_str() );
} else {
throw Error( "KatanaEngine not created yet, run the global router first." );
}
return katana;
}
void GraphicKatanaEngine::_globalRoute ()
{
KatanaEngine* katana = getForFramework( CreateEngine );
katana->runGlobalRouter();
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
//Breakpoint::stop( 0, "GraphicKatanaEngine::_globalRoute() done." );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void GraphicKatanaEngine::_loadGlobalRouting ()
{
Apaired segments building for symmetric routing (step 1). * Change: In Hurricane::BaseFlags, store flags in uint64_t instead of unsigned int because we start to need more than 32 different flags in some tools. * New: In ::getString() & ::getRecord() templates, add support for std::array<>. * Change: In CRL::ToolEngine, add support for timer (time & memory measurements) displaced from Katabatic. This way all ToolEngine can use this feature. The _postCreate() method display the memory just after ToolEngine allocation. * Change: In Etesian::EtesianEngine, make use of the ToolEngine builtin timer (remove the local one). Forgot to call the base class _postCreate() and _preDestroy(). * Change: In Anabatic::AnabaticEngine, make use of the ToolEngine builtin timer (remove the local one). * New: In Anabatic, new AutoSegments_Connecteds() collection. This Collection allows a deterministic walkthough *all* the AutoSegments connected either to source or target of one AutoSegment. * New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an AutoContactTerminal is the *only one* anchored on a RoutingPad, thus being a true "end point" and not a kind of feed-through. * New: In Katana::KatanaEngine, added support for symmetric nets. Created new class DataSymmetric to store symmetric information of a net (mainly the paired AutoSegments). Added KatanaEngine::runSymmetricRouter(), for now only build the DataSymmetric informations. More to come... * Change: In Katana::GraphicKatanaEngine::_runTest(), now perform symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
KatanaEngine* katana = getForFramework( NoFlags );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
_viewer->clearToolInterrupt();
Apaired segments building for symmetric routing (step 1). * Change: In Hurricane::BaseFlags, store flags in uint64_t instead of unsigned int because we start to need more than 32 different flags in some tools. * New: In ::getString() & ::getRecord() templates, add support for std::array<>. * Change: In CRL::ToolEngine, add support for timer (time & memory measurements) displaced from Katabatic. This way all ToolEngine can use this feature. The _postCreate() method display the memory just after ToolEngine allocation. * Change: In Etesian::EtesianEngine, make use of the ToolEngine builtin timer (remove the local one). Forgot to call the base class _postCreate() and _preDestroy(). * Change: In Anabatic::AnabaticEngine, make use of the ToolEngine builtin timer (remove the local one). * New: In Anabatic, new AutoSegments_Connecteds() collection. This Collection allows a deterministic walkthough *all* the AutoSegments connected either to source or target of one AutoSegment. * New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an AutoContactTerminal is the *only one* anchored on a RoutingPad, thus being a true "end point" and not a kind of feed-through. * New: In Katana::KatanaEngine, added support for symmetric nets. Created new class DataSymmetric to store symmetric information of a net (mainly the paired AutoSegments). Added KatanaEngine::runSymmetricRouter(), for now only build the DataSymmetric informations. More to come... * Change: In Katana::GraphicKatanaEngine::_runTest(), now perform symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
katana->loadGlobalRouting( Anabatic::EngineLoadGrByNet );
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
//Breakpoint::stop( 0, "GraphicKatanaEngine::_loadGlobalRouting() done." );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void GraphicKatanaEngine::_balanceGlobalDensity ()
{
KatanaEngine* katana = getForFramework( NoFlags );
//katana->balanceGlobalDensity();
katana->layerAssign( Anabatic::EngineNoNetLayerAssign );
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
//Breakpoint::stop( 0, "GraphicKatanaEngine::_balanceGlobalDensity() done." );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void GraphicKatanaEngine::_runNegociatePreRouted ()
{
KatanaEngine* katana = getForFramework( CreateEngine );
katana->runNegociate( Flags::PreRoutedStage );
}
void GraphicKatanaEngine::_runNegociate ()
{
KatanaEngine* katana = getForFramework( NoFlags );
katana->runNegociate( Flags::PairSymmetrics );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void GraphicKatanaEngine::_finalize ()
{
KatanaEngine* katana = getForFramework( NoFlags );
if (katana) {
katana->finalizeLayout();
katana->destroy();
}
}
void GraphicKatanaEngine::_runTest ()
{
KatanaEngine* katana = getForFramework( NoFlags );
Apaired segments building for symmetric routing (step 1). * Change: In Hurricane::BaseFlags, store flags in uint64_t instead of unsigned int because we start to need more than 32 different flags in some tools. * New: In ::getString() & ::getRecord() templates, add support for std::array<>. * Change: In CRL::ToolEngine, add support for timer (time & memory measurements) displaced from Katabatic. This way all ToolEngine can use this feature. The _postCreate() method display the memory just after ToolEngine allocation. * Change: In Etesian::EtesianEngine, make use of the ToolEngine builtin timer (remove the local one). Forgot to call the base class _postCreate() and _preDestroy(). * Change: In Anabatic::AnabaticEngine, make use of the ToolEngine builtin timer (remove the local one). * New: In Anabatic, new AutoSegments_Connecteds() collection. This Collection allows a deterministic walkthough *all* the AutoSegments connected either to source or target of one AutoSegment. * New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an AutoContactTerminal is the *only one* anchored on a RoutingPad, thus being a true "end point" and not a kind of feed-through. * New: In Katana::KatanaEngine, added support for symmetric nets. Created new class DataSymmetric to store symmetric information of a net (mainly the paired AutoSegments). Added KatanaEngine::runSymmetricRouter(), for now only build the DataSymmetric informations. More to come... * Change: In Katana::GraphicKatanaEngine::_runTest(), now perform symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
if (katana) {
katana->loadGlobalRouting( Anabatic::EngineLoadGrByNet );
Support for symmetric routing in Anabatic/Katabatic. * New: In Katana::SegmentFsm, the object is now able to handle two events at the same time. The master and it's symmetric. When there is no symmetric, the corresponing data is just left blank. This makes a bigger object, but as there is only one when running, it is not an issue. Candidates tracks are now an vector of array<2> (pairs), the TrackCost::Compare() functor has to be wrapped through CompareCostArray. The compined TrackCost of the two tracks is accumulated into the first element. Everything related to events gets duplicated: _event is now _event1 and _event2, and so on. As there can be now two Manipulator actions done with SegmentFsm, this class now completly hide the Manipulator level from the RoutingEvent processing. New function ::bindToTrack() to perform the track insertion. * New: In Katana::TrackCost, add a new ::merge() function. * New: In Katana::TrackElement and Katana::TrackSegment, add symmetric management. Allows to know if a TrackElement has a symmetric and to access it. * New: In Katana::DataSymmetric, add new overload for ::getSymmetrical() to handle DbU::Unit and intervals. * Change: In Katana::RoutingEvent, remove all direct uses of Manipulator objects. Now any change to the event associated segment must go through call to Segment Fsm. * Change: In Katana, adjust the debug level so internal informations are put below level 156. * New: In Hurricane::DbU, in ::getValueString(), special display when the value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
// Now done through Horus.
//katana->runTest();
katana->runNegociate( Flags::PairSymmetrics );
Support for symmetric routing in Anabatic/Katabatic. * New: In Katana::SegmentFsm, the object is now able to handle two events at the same time. The master and it's symmetric. When there is no symmetric, the corresponing data is just left blank. This makes a bigger object, but as there is only one when running, it is not an issue. Candidates tracks are now an vector of array<2> (pairs), the TrackCost::Compare() functor has to be wrapped through CompareCostArray. The compined TrackCost of the two tracks is accumulated into the first element. Everything related to events gets duplicated: _event is now _event1 and _event2, and so on. As there can be now two Manipulator actions done with SegmentFsm, this class now completly hide the Manipulator level from the RoutingEvent processing. New function ::bindToTrack() to perform the track insertion. * New: In Katana::TrackCost, add a new ::merge() function. * New: In Katana::TrackElement and Katana::TrackSegment, add symmetric management. Allows to know if a TrackElement has a symmetric and to access it. * New: In Katana::DataSymmetric, add new overload for ::getSymmetrical() to handle DbU::Unit and intervals. * Change: In Katana::RoutingEvent, remove all direct uses of Manipulator objects. Now any change to the event associated segment must go through call to Segment Fsm. * Change: In Katana, adjust the debug level so internal informations are put below level 156. * New: In Hurricane::DbU, in ::getValueString(), special display when the value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
//katana->runNegociate();
Apaired segments building for symmetric routing (step 1). * Change: In Hurricane::BaseFlags, store flags in uint64_t instead of unsigned int because we start to need more than 32 different flags in some tools. * New: In ::getString() & ::getRecord() templates, add support for std::array<>. * Change: In CRL::ToolEngine, add support for timer (time & memory measurements) displaced from Katabatic. This way all ToolEngine can use this feature. The _postCreate() method display the memory just after ToolEngine allocation. * Change: In Etesian::EtesianEngine, make use of the ToolEngine builtin timer (remove the local one). Forgot to call the base class _postCreate() and _preDestroy(). * Change: In Anabatic::AnabaticEngine, make use of the ToolEngine builtin timer (remove the local one). * New: In Anabatic, new AutoSegments_Connecteds() collection. This Collection allows a deterministic walkthough *all* the AutoSegments connected either to source or target of one AutoSegment. * New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an AutoContactTerminal is the *only one* anchored on a RoutingPad, thus being a true "end point" and not a kind of feed-through. * New: In Katana::KatanaEngine, added support for symmetric nets. Created new class DataSymmetric to store symmetric information of a net (mainly the paired AutoSegments). Added KatanaEngine::runSymmetricRouter(), for now only build the DataSymmetric informations. More to come... * Change: In Katana::GraphicKatanaEngine::_runTest(), now perform symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
}
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
void GraphicKatanaEngine::_dumpMeasures ()
{
KatanaEngine* katana = getForFramework( NoFlags );
if (katana) katana->dumpMeasures();
}
void GraphicKatanaEngine::_save ()
{
Cell* cell = getCell();
AllianceFramework* af = AllianceFramework::get();
string name = getString(cell->getName()) + "_katana";
cell->setName( name );
af->saveCell( cell, Catalog::State::Physical );
}
void GraphicKatanaEngine::_detailRoute ()
{
_loadGlobalRouting ();
//Breakpoint::stop( 0, "Global routing loaded." );
_balanceGlobalDensity();
//Breakpoint::stop( 0, "Global density balanced." );
_runNegociate ();
}
void GraphicKatanaEngine::_route ()
{
_runNegociatePreRouted();
_globalRoute ();
_detailRoute ();
_finalize ();
}
void GraphicKatanaEngine::postEvent ()
{
static uint32_t count = 0;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (not (count++ % 500)) {
QApplication::processEvents();
if (_viewer->isToolInterrupted()) {
KatanaEngine* katana = KatanaEngine::get( getCell() );
if (katana) katana->setInterrupt( true );
_viewer->clearToolInterrupt();
}
}
}
void GraphicKatanaEngine::addToMenu ( CellViewer* viewer )
{
assert( _viewer == NULL );
_viewer = viewer;
if (_viewer->hasMenuAction("placeAndRoute.route")) {
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cerr << Warning( "GraphicKatanaEngine::addToMenu() - Katana detailed router already hooked in." ) << endl;
return;
}
_viewer->addMenu ( "placeAndRoute.stepByStep", "&Step by step" );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
_viewer->addToMenu( "placeAndRoute.route"
, "&Route . . . . . [Katana]"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Route the design (global & detailed)"
, std::bind(&GraphicKatanaEngine::_route,this)
, QIcon()
, "placeAndRoute.stepByStep"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
);
_viewer->addToMenu( "placeAndRoute.stepByStep.========" );
_viewer->addToMenu( "placeAndRoute.stepByStep.detailedPreRoute"
, "Detailed Pre-Route . [Katana]"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Run the <b>Katana</b> detailed router on pre-routed nets"
, std::bind(&GraphicKatanaEngine::_runNegociatePreRouted,this)
);
_viewer->addToMenu( "placeAndRoute.stepByStep.globalRoute"
, "&Global Route . . . [Katana]"
, "Run the <b>Katana</b> global router"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, std::bind(&GraphicKatanaEngine::_globalRoute,this)
);
_viewer->addToMenu( "placeAndRoute.stepByStep.detailedRoute"
, "&Detailed Route . . [Katana]"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Run the <b>Katana</b> detailed router"
, std::bind(&GraphicKatanaEngine::_detailRoute,this)
);
_viewer->addToMenu( "placeAndRoute.stepByStep.finalize"
, "&Finalize Routing . [Katana]"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Closing Routing"
, std::bind(&GraphicKatanaEngine::_finalize,this)
);
_viewer->addToMenu( "placeAndRoute.stepByStep.dumpMeasures"
, "Dump &Measures . . [Katana]"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Dumping Measurements on the disk"
, std::bind(&GraphicKatanaEngine::_dumpMeasures,this)
);
#if NO_NEED_OF_IT_NOW
_viewer->addToMenu( "placeAndRoute.stepByStep.save"
, "&Save Design"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
, "Save routed design (temporary hack)"
, std::bind(&GraphicKatanaEngine::_save,this)
);
_viewer->addToMenu( "placeAndRoute.stepByStep.runTest"
, "Run &Test"
, "Run Test Program (symmetric routing of gmChamla)"
, std::bind(&GraphicKatanaEngine::_runTest,this)
);
#endif
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
const Name& GraphicKatanaEngine::getName () const
{ return KatanaEngine::staticGetName(); }
Cell* GraphicKatanaEngine::getCell ()
{
if (_viewer == NULL) {
throw Error( "<b>Katana:</b> GraphicKatanaEngine not bound to any Viewer." );
return NULL;
}
if (_viewer->getCell() == NULL) {
throw Error( "<b>Katana:</b> No Cell is loaded into the Viewer." );
return NULL;
}
return _viewer->getCell();
}
GraphicKatanaEngine* GraphicKatanaEngine::grab ()
{
if (not _references) {
_singleton = new GraphicKatanaEngine ();
}
_references++;
return _singleton;
}
size_t GraphicKatanaEngine::release ()
{
--_references;
if (not _references) {
delete _singleton;
_singleton = NULL;
}
return _references;
}
GraphicKatanaEngine::GraphicKatanaEngine ()
: GraphicTool()
, _viewer (NULL)
{
addDrawGo( "Anabatic::GCell", initGCell, drawGCell );
addDrawGo( "Anabatic::Edge" , initEdge , drawEdge );
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
GraphicKatanaEngine::~GraphicKatanaEngine ()
{ }
} // Katana namespace.