Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
// -*- C++ -*-
|
|
|
|
//
|
|
|
|
// This file is part of the Coriolis Software.
|
2018-01-06 10:55:44 -06:00
|
|
|
// Copyright (c) UPMC 2008-2018, All Rights Reserved
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
//
|
|
|
|
// +-----------------------------------------------------------------+
|
|
|
|
// | C O R I O L I S |
|
|
|
|
// | K i t e - D e t a i l e d R o u t e r |
|
|
|
|
// | |
|
|
|
|
// | Author : Jean-Paul Chaput |
|
|
|
|
// | E-mail : Jean-Paul.Chaput@lip6.fr |
|
|
|
|
// | =============================================================== |
|
|
|
|
// | C++ Header : "./GraphicKatanaEngine.cpp" |
|
|
|
|
// +-----------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
#include <boost/bind.hpp>
|
|
|
|
#include <QAction>
|
|
|
|
#include <QMenu>
|
|
|
|
#include <QMenuBar>
|
|
|
|
#include <QApplication>
|
|
|
|
#include <hurricane/Warning.h>
|
|
|
|
#include <hurricane/Error.h>
|
|
|
|
#include <hurricane/Breakpoint.h>
|
|
|
|
#include <hurricane/DebugSession.h>
|
|
|
|
#include <hurricane/Go.h>
|
|
|
|
#include <hurricane/Net.h>
|
|
|
|
#include <hurricane/Cell.h>
|
|
|
|
#include <hurricane/viewer/Graphics.h>
|
|
|
|
#include <hurricane/viewer/CellWidget.h>
|
|
|
|
#include <hurricane/viewer/CellViewer.h>
|
|
|
|
#include <hurricane/viewer/ControllerWidget.h>
|
|
|
|
#include <hurricane/viewer/ExceptionWidget.h>
|
|
|
|
#include <crlcore/Utilities.h>
|
|
|
|
#include <crlcore/AllianceFramework.h>
|
|
|
|
#include <anabatic/GCell.h>
|
|
|
|
#include <katana/GraphicKatanaEngine.h>
|
|
|
|
|
|
|
|
|
|
|
|
namespace Katana {
|
|
|
|
|
|
|
|
using namespace std;
|
|
|
|
using Hurricane::Error;
|
|
|
|
using Hurricane::Warning;
|
|
|
|
using Hurricane::Exception;
|
|
|
|
using Hurricane::Breakpoint;
|
|
|
|
using Hurricane::DebugSession;
|
|
|
|
using Hurricane::Point;
|
|
|
|
using Hurricane::Entity;
|
|
|
|
using Hurricane::Net;
|
|
|
|
using Hurricane::Graphics;
|
|
|
|
using Hurricane::ColorScale;
|
2016-09-07 04:21:36 -05:00
|
|
|
using Hurricane::DisplayStyle;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
using Hurricane::ControllerWidget;
|
|
|
|
using Hurricane::ExceptionWidget;
|
|
|
|
using CRL::Catalog;
|
|
|
|
using CRL::AllianceFramework;
|
2016-09-07 04:21:36 -05:00
|
|
|
using Anabatic::Edge;
|
|
|
|
using Anabatic::GCell;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
|
|
|
size_t GraphicKatanaEngine::_references = 0;
|
|
|
|
GraphicKatanaEngine* GraphicKatanaEngine::_singleton = NULL;
|
|
|
|
|
|
|
|
|
2016-09-07 04:21:36 -05:00
|
|
|
void GraphicKatanaEngine::initGCell ( CellWidget* widget )
|
|
|
|
{
|
|
|
|
widget->getDrawingPlanes().setPen( Qt::NoPen );
|
2016-09-10 11:49:48 -05:00
|
|
|
KatanaEngine* katana = KatanaEngine::get( widget->getCell() );
|
|
|
|
if (katana) katana->setDensityMode( GCell::MaxDensity );
|
2016-09-07 04:21:36 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::drawGCell ( CellWidget* widget
|
|
|
|
, const Go* go
|
|
|
|
, const BasicLayer* basicLayer
|
|
|
|
, const Box& box
|
|
|
|
, const Transformation& transformation
|
|
|
|
)
|
|
|
|
{
|
|
|
|
const GCell* gcell = static_cast<const GCell*>(go);
|
|
|
|
|
|
|
|
QPainter& painter = widget->getPainter();
|
|
|
|
QPen pen = Graphics::getPen ("Anabatic::GCell",widget->getDarkening());
|
|
|
|
Box bb = gcell->getBoundingBox();
|
|
|
|
QRect pixelBb = widget->dbuToScreenRect(bb);
|
|
|
|
|
2016-09-10 11:49:48 -05:00
|
|
|
if (GCell::getDisplayMode() == GCell::Density) {
|
Replace "unsigned int" by "Flags" in all AutoSegments collections.
* Change: In Anabatic::AutoSegments collections, change the type of all
the flags that where in "unsigned int" (32 bits) to Flags (uint64_t)
as there is now more than 32 flags for functions.
* New: In Ababatic::Constants, added new flag Flags::WithPerpands, which
makes the number of flags tip over 32 bits, thus making mandatory
to uses Flags and not unsigned int.
* New: In Anabatic::AutoSegments_Perpandiculars, manage a new flag
Flags::WithDoglegs to allow to propagate through global segments that
are connecteds via doglegs on local segments. Meaning that there is
a good chance that they could be aligned.
Slighly change the way we propagate on aligned segments: no longer
check for VTee or HTee, but only for same direction and layer as
master.
* New: In Anabatic & Katana, replace all the "int", "long" and their
variants by the less implementation ambiguous "int32_t", "int64_t"
(and variant). This should help to better detect bit trucation in
flags.
Use the type to give a hint about the flags kind:
- Type "Flags", for flags shared among Anabatic & Katana
functions/methods (may also appear in some objects states).
- Type "uint32_t" for flags belonging to an object internal
state of from Hurricane functions flags (those should be
grouped in a Flag subclass in a perfect world).
2017-05-16 07:53:33 -05:00
|
|
|
uint32_t density = (unsigned int)( 255.0 * gcell->getDensity() );
|
2016-09-10 11:49:48 -05:00
|
|
|
if (density > 255) density = 255;
|
2016-09-07 04:21:36 -05:00
|
|
|
|
2016-09-10 11:49:48 -05:00
|
|
|
painter.setBrush( Graphics::getColorScale( ColorScale::Fire ).getBrush( density, widget->getDarkening() ) );
|
|
|
|
painter.drawRect( pixelBb );
|
|
|
|
} else {
|
2019-02-20 11:24:43 -06:00
|
|
|
int fontScale = 0;
|
|
|
|
int halfHeight = 20;
|
|
|
|
int halfWidth = 80;
|
|
|
|
if (widget->isPrinter()) {
|
|
|
|
fontScale = -5;
|
|
|
|
halfHeight = 9;
|
|
|
|
halfWidth = 39;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
painter.setPen ( pen );
|
|
|
|
painter.setBrush( Graphics::getBrush("Anabatic::GCell",widget->getDarkening()) );
|
|
|
|
painter.drawRect( pixelBb );
|
|
|
|
|
|
|
|
if ( (pixelBb.width() > 2*halfWidth) and (pixelBb.height() > 2*halfHeight) ) {
|
|
|
|
QString text = QString("%1").arg(gcell->getId());
|
|
|
|
QFont font = Graphics::getFixedFont( QFont::Normal, false, false, fontScale );
|
|
|
|
painter.setFont(font);
|
|
|
|
|
|
|
|
pen.setWidth( 1 );
|
|
|
|
painter.setPen( pen );
|
|
|
|
|
|
|
|
painter.save ();
|
|
|
|
painter.translate( widget->dbuToScreenPoint(bb.getCenter().getX(), bb.getCenter().getY()) );
|
|
|
|
painter.drawRect ( QRect( -halfWidth, -halfHeight, 2*halfWidth, 2*halfHeight ) );
|
|
|
|
painter.drawText ( QRect( -halfWidth, -halfHeight, 2*halfWidth, 2*halfHeight )
|
|
|
|
, text
|
|
|
|
, QTextOption(Qt::AlignCenter)
|
|
|
|
);
|
|
|
|
painter.restore ();
|
2016-09-10 11:49:48 -05:00
|
|
|
}
|
2016-09-07 04:21:36 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::initEdge ( CellWidget* widget )
|
|
|
|
{
|
|
|
|
widget->getDrawingPlanes().setPen( Qt::NoPen );
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::drawEdge ( CellWidget* widget
|
|
|
|
, const Go* go
|
|
|
|
, const BasicLayer* basicLayer
|
|
|
|
, const Box& box
|
|
|
|
, const Transformation& transformation
|
|
|
|
)
|
|
|
|
{
|
|
|
|
static QFont font = Graphics::getFixedFont( QFont::Bold );
|
|
|
|
static int fontHeight = QFontMetrics(font).height();
|
|
|
|
|
|
|
|
const Edge* edge = static_cast<const Edge*>(go);
|
|
|
|
|
|
|
|
if (edge) {
|
Replace "unsigned int" by "Flags" in all AutoSegments collections.
* Change: In Anabatic::AutoSegments collections, change the type of all
the flags that where in "unsigned int" (32 bits) to Flags (uint64_t)
as there is now more than 32 flags for functions.
* New: In Ababatic::Constants, added new flag Flags::WithPerpands, which
makes the number of flags tip over 32 bits, thus making mandatory
to uses Flags and not unsigned int.
* New: In Anabatic::AutoSegments_Perpandiculars, manage a new flag
Flags::WithDoglegs to allow to propagate through global segments that
are connecteds via doglegs on local segments. Meaning that there is
a good chance that they could be aligned.
Slighly change the way we propagate on aligned segments: no longer
check for VTee or HTee, but only for same direction and layer as
master.
* New: In Anabatic & Katana, replace all the "int", "long" and their
variants by the less implementation ambiguous "int32_t", "int64_t"
(and variant). This should help to better detect bit trucation in
flags.
Use the type to give a hint about the flags kind:
- Type "Flags", for flags shared among Anabatic & Katana
functions/methods (may also appear in some objects states).
- Type "uint32_t" for flags belonging to an object internal
state of from Hurricane functions flags (those should be
grouped in a Flag subclass in a perfect world).
2017-05-16 07:53:33 -05:00
|
|
|
Box bb = edge->getBoundingBox();
|
|
|
|
uint32_t occupancy = 255;
|
2019-02-20 11:24:43 -06:00
|
|
|
//if (edge->getRealOccupancy() < edge->getCapacity())
|
|
|
|
// occupancy = (uint32_t)( 255.0 * ( (float)edge->getRealOccupancy() / (float)edge->getCapacity() ) );
|
|
|
|
|
|
|
|
float edgeOccupancy = edge->getEstimateOccupancy() + (float)edge->getRealOccupancy();
|
|
|
|
|
|
|
|
if ((unsigned int)edgeOccupancy < edge->getCapacity())
|
|
|
|
occupancy = (uint32_t)( 255.0 * (edgeOccupancy / (float)edge->getCapacity()) );
|
2016-09-07 04:21:36 -05:00
|
|
|
|
|
|
|
QPainter& painter = widget->getPainter();
|
2019-02-20 11:24:43 -06:00
|
|
|
if ((unsigned int)edgeOccupancy > edge->getCapacity()) {
|
2016-09-07 04:21:36 -05:00
|
|
|
QColor color ( Qt::cyan );
|
|
|
|
painter.setPen( DisplayStyle::darken(color,widget->getDarkening()) );
|
|
|
|
}
|
|
|
|
|
|
|
|
QBrush brush = QBrush( Qt::white, Qt::DiagCrossPattern );
|
|
|
|
if (edge->getCapacity() > 0.0)
|
|
|
|
brush = Graphics::getColorScale( ColorScale::Fire ).getBrush( occupancy, widget->getDarkening() );
|
|
|
|
|
|
|
|
QRect pixelBb = widget->dbuToScreenRect( bb, false);
|
|
|
|
painter.setPen( Qt::NoPen );
|
|
|
|
painter.setBrush( brush );
|
|
|
|
painter.drawRect( pixelBb );
|
|
|
|
|
|
|
|
if (fontHeight > ((edge->isHorizontal()) ? pixelBb.height() : pixelBb.width()) + 4) return;
|
|
|
|
|
2019-02-20 11:24:43 -06:00
|
|
|
//QString text = QString("%1/%2").arg(edge->getRealOccupancy()).arg(edge->getCapacity());
|
Support for density estimation for the global router.
* Bug: In Anabatic::Edge::getDistance(), remove the additionnal 0.1
added to horizontal edges. This was for testing before the hScaling
parameter was added (to the distance computation in GlobalRoute).
* New: Anabatic::Path_Edges, collectio to walkthrough all the edges
between two node. More complex than in Knik as we are no longer
using a regular grid. We may request the north bound path or south
bound path.
Collection returned by AnabaticEngine::getEdgesUnderPath().
* New: In Anabatic::NetData, add a new flag GlobalEstimated to tell if
the net RMST has been computed (using FLUTE).
* New: In Anabatic::PriorityQueue, used to sort Vertexes by increasing
distances, add a new criterion to be used in case of distance
equality. The attractor which should be the center of the search
area. In case of equality, we choose the Vertex which is closest
to the attractor. Give a small improvement, and more "dendritic"
trees.
For a more simple implementation of the comparison function it is
made as a static member (so no two Dijkstra objects at the same
time...).
* Change: In Anabatic::Edge, make the estimate occupance a floating
point number instead of an integer.
* New: In Katana::GlobalRoute, finally implement the estimated congestion
driven router. Net RMST estimated using FLUTE.
Use the historic cost from Knik implementation and not the one
given in Damien's thesis, which seems not be the same and a bit
strange.
* New: In KatanaEngine, add the ability to exclude nets from routing,
and export it to Python.
2019-02-26 13:03:53 -06:00
|
|
|
QString text = QString("%1/%2 %3")
|
2019-02-20 11:24:43 -06:00
|
|
|
.arg( edgeOccupancy )
|
Support for density estimation for the global router.
* Bug: In Anabatic::Edge::getDistance(), remove the additionnal 0.1
added to horizontal edges. This was for testing before the hScaling
parameter was added (to the distance computation in GlobalRoute).
* New: Anabatic::Path_Edges, collectio to walkthrough all the edges
between two node. More complex than in Knik as we are no longer
using a regular grid. We may request the north bound path or south
bound path.
Collection returned by AnabaticEngine::getEdgesUnderPath().
* New: In Anabatic::NetData, add a new flag GlobalEstimated to tell if
the net RMST has been computed (using FLUTE).
* New: In Anabatic::PriorityQueue, used to sort Vertexes by increasing
distances, add a new criterion to be used in case of distance
equality. The attractor which should be the center of the search
area. In case of equality, we choose the Vertex which is closest
to the attractor. Give a small improvement, and more "dendritic"
trees.
For a more simple implementation of the comparison function it is
made as a static member (so no two Dijkstra objects at the same
time...).
* Change: In Anabatic::Edge, make the estimate occupance a floating
point number instead of an integer.
* New: In Katana::GlobalRoute, finally implement the estimated congestion
driven router. Net RMST estimated using FLUTE.
Use the historic cost from Knik implementation and not the one
given in Damien's thesis, which seems not be the same and a bit
strange.
* New: In KatanaEngine, add the ability to exclude nets from routing,
and export it to Python.
2019-02-26 13:03:53 -06:00
|
|
|
.arg( edge->getCapacity() )
|
|
|
|
.arg( edge->getHistoricCost() );
|
2016-09-07 04:21:36 -05:00
|
|
|
QColor color ( (occupancy > 170) ? Qt::black : Qt::white );
|
|
|
|
painter.setPen (DisplayStyle::darken(color,widget->getDarkening()));
|
|
|
|
painter.setFont(font);
|
|
|
|
|
|
|
|
if (edge->isVertical()) {
|
|
|
|
painter.save ();
|
|
|
|
painter.translate( widget->dbuToScreenPoint(bb.getXMin(), bb.getYMin()) );
|
|
|
|
painter.rotate ( -90 );
|
|
|
|
painter.drawText (QRect( 0
|
|
|
|
, 0
|
|
|
|
, widget->dbuToScreenLength(bb.getHeight())
|
|
|
|
, widget->dbuToScreenLength(bb.getWidth ()))
|
|
|
|
, text
|
|
|
|
, QTextOption(Qt::AlignCenter)
|
|
|
|
);
|
|
|
|
painter.restore ();
|
|
|
|
} else
|
|
|
|
painter.drawText( widget->dbuToScreenRect(bb,false ), text, QTextOption(Qt::AlignCenter) );
|
|
|
|
|
|
|
|
painter.setPen( Qt::NoPen );
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
KatanaEngine* GraphicKatanaEngine::createEngine ()
|
|
|
|
{
|
|
|
|
Cell* cell = getCell ();
|
|
|
|
|
|
|
|
KatanaEngine* katana = KatanaEngine::get( cell );
|
|
|
|
if (not katana) {
|
|
|
|
katana = KatanaEngine::create( cell );
|
|
|
|
katana->setPostEventCb( boost::bind(&GraphicKatanaEngine::postEvent,this) );
|
|
|
|
katana->setViewer( _viewer );
|
2017-05-09 11:33:55 -05:00
|
|
|
katana->printConfiguration();
|
2016-09-06 09:27:20 -05:00
|
|
|
katana->digitalInit();
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
} else
|
|
|
|
cerr << Warning( "%s already has a Katana engine.", getString(cell).c_str() ) << endl;
|
|
|
|
|
|
|
|
return katana;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Replace "unsigned int" by "Flags" in all AutoSegments collections.
* Change: In Anabatic::AutoSegments collections, change the type of all
the flags that where in "unsigned int" (32 bits) to Flags (uint64_t)
as there is now more than 32 flags for functions.
* New: In Ababatic::Constants, added new flag Flags::WithPerpands, which
makes the number of flags tip over 32 bits, thus making mandatory
to uses Flags and not unsigned int.
* New: In Anabatic::AutoSegments_Perpandiculars, manage a new flag
Flags::WithDoglegs to allow to propagate through global segments that
are connecteds via doglegs on local segments. Meaning that there is
a good chance that they could be aligned.
Slighly change the way we propagate on aligned segments: no longer
check for VTee or HTee, but only for same direction and layer as
master.
* New: In Anabatic & Katana, replace all the "int", "long" and their
variants by the less implementation ambiguous "int32_t", "int64_t"
(and variant). This should help to better detect bit trucation in
flags.
Use the type to give a hint about the flags kind:
- Type "Flags", for flags shared among Anabatic & Katana
functions/methods (may also appear in some objects states).
- Type "uint32_t" for flags belonging to an object internal
state of from Hurricane functions flags (those should be
grouped in a Flag subclass in a perfect world).
2017-05-16 07:53:33 -05:00
|
|
|
KatanaEngine* GraphicKatanaEngine::getForFramework ( uint32_t flags )
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
{
|
|
|
|
// Currently, only one framework is avalaible: Alliance.
|
|
|
|
|
|
|
|
KatanaEngine* katana = KatanaEngine::get( getCell() );
|
|
|
|
if (katana) return katana;
|
|
|
|
|
|
|
|
if (flags & CreateEngine) {
|
|
|
|
katana = createEngine();
|
|
|
|
if (not katana)
|
|
|
|
throw Error( "Failed to create Katana engine on %s.", getString(getCell()).c_str() );
|
|
|
|
} else {
|
|
|
|
throw Error( "KatanaEngine not created yet, run the global router first." );
|
|
|
|
}
|
|
|
|
|
|
|
|
return katana;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_globalRoute ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( CreateEngine );
|
|
|
|
katana->runGlobalRouter();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_loadGlobalRouting ()
|
|
|
|
{
|
Apaired segments building for symmetric routing (step 1).
* Change: In Hurricane::BaseFlags, store flags in uint64_t instead of
unsigned int because we start to need more than 32 different flags
in some tools.
* New: In ::getString() & ::getRecord() templates, add support for
std::array<>.
* Change: In CRL::ToolEngine, add support for timer (time & memory
measurements) displaced from Katabatic. This way all ToolEngine
can use this feature. The _postCreate() method display the
memory just after ToolEngine allocation.
* Change: In Etesian::EtesianEngine, make use of the ToolEngine
builtin timer (remove the local one). Forgot to call the base
class _postCreate() and _preDestroy().
* Change: In Anabatic::AnabaticEngine, make use of the ToolEngine
builtin timer (remove the local one).
* New: In Anabatic, new AutoSegments_Connecteds() collection. This
Collection allows a deterministic walkthough *all* the AutoSegments
connected either to source or target of one AutoSegment.
* New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an
AutoContactTerminal is the *only one* anchored on a RoutingPad,
thus being a true "end point" and not a kind of feed-through.
* New: In Katana::KatanaEngine, added support for symmetric nets.
Created new class DataSymmetric to store symmetric information
of a net (mainly the paired AutoSegments).
Added KatanaEngine::runSymmetricRouter(), for now only build
the DataSymmetric informations. More to come...
* Change: In Katana::GraphicKatanaEngine::_runTest(), now perform
symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
_viewer->clearToolInterrupt();
|
Apaired segments building for symmetric routing (step 1).
* Change: In Hurricane::BaseFlags, store flags in uint64_t instead of
unsigned int because we start to need more than 32 different flags
in some tools.
* New: In ::getString() & ::getRecord() templates, add support for
std::array<>.
* Change: In CRL::ToolEngine, add support for timer (time & memory
measurements) displaced from Katabatic. This way all ToolEngine
can use this feature. The _postCreate() method display the
memory just after ToolEngine allocation.
* Change: In Etesian::EtesianEngine, make use of the ToolEngine
builtin timer (remove the local one). Forgot to call the base
class _postCreate() and _preDestroy().
* Change: In Anabatic::AnabaticEngine, make use of the ToolEngine
builtin timer (remove the local one).
* New: In Anabatic, new AutoSegments_Connecteds() collection. This
Collection allows a deterministic walkthough *all* the AutoSegments
connected either to source or target of one AutoSegment.
* New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an
AutoContactTerminal is the *only one* anchored on a RoutingPad,
thus being a true "end point" and not a kind of feed-through.
* New: In Katana::KatanaEngine, added support for symmetric nets.
Created new class DataSymmetric to store symmetric information
of a net (mainly the paired AutoSegments).
Added KatanaEngine::runSymmetricRouter(), for now only build
the DataSymmetric informations. More to come...
* Change: In Katana::GraphicKatanaEngine::_runTest(), now perform
symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
|
|
|
katana->loadGlobalRouting( Anabatic::EngineLoadGrByNet );
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_balanceGlobalDensity ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
|
|
|
//katana->balanceGlobalDensity();
|
|
|
|
katana->layerAssign( Anabatic::EngineNoNetLayerAssign );
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_runNegociatePreRouted ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( CreateEngine );
|
|
|
|
katana->runNegociate( Flags::PreRoutedStage );
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_runNegociate ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
2017-05-26 06:32:30 -05:00
|
|
|
katana->runNegociate( Flags::PairSymmetrics );
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_finalize ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
|
|
|
if (katana) {
|
|
|
|
katana->finalizeLayout();
|
|
|
|
katana->destroy();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-02-24 07:37:11 -06:00
|
|
|
|
|
|
|
void GraphicKatanaEngine::_runTest ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
Apaired segments building for symmetric routing (step 1).
* Change: In Hurricane::BaseFlags, store flags in uint64_t instead of
unsigned int because we start to need more than 32 different flags
in some tools.
* New: In ::getString() & ::getRecord() templates, add support for
std::array<>.
* Change: In CRL::ToolEngine, add support for timer (time & memory
measurements) displaced from Katabatic. This way all ToolEngine
can use this feature. The _postCreate() method display the
memory just after ToolEngine allocation.
* Change: In Etesian::EtesianEngine, make use of the ToolEngine
builtin timer (remove the local one). Forgot to call the base
class _postCreate() and _preDestroy().
* Change: In Anabatic::AnabaticEngine, make use of the ToolEngine
builtin timer (remove the local one).
* New: In Anabatic, new AutoSegments_Connecteds() collection. This
Collection allows a deterministic walkthough *all* the AutoSegments
connected either to source or target of one AutoSegment.
* New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an
AutoContactTerminal is the *only one* anchored on a RoutingPad,
thus being a true "end point" and not a kind of feed-through.
* New: In Katana::KatanaEngine, added support for symmetric nets.
Created new class DataSymmetric to store symmetric information
of a net (mainly the paired AutoSegments).
Added KatanaEngine::runSymmetricRouter(), for now only build
the DataSymmetric informations. More to come...
* Change: In Katana::GraphicKatanaEngine::_runTest(), now perform
symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
|
|
|
if (katana) {
|
|
|
|
katana->loadGlobalRouting( Anabatic::EngineLoadGrByNet );
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
// Now done through Horus.
|
|
|
|
//katana->runTest();
|
2017-05-26 06:32:30 -05:00
|
|
|
katana->runNegociate( Flags::PairSymmetrics );
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
//katana->runNegociate();
|
Apaired segments building for symmetric routing (step 1).
* Change: In Hurricane::BaseFlags, store flags in uint64_t instead of
unsigned int because we start to need more than 32 different flags
in some tools.
* New: In ::getString() & ::getRecord() templates, add support for
std::array<>.
* Change: In CRL::ToolEngine, add support for timer (time & memory
measurements) displaced from Katabatic. This way all ToolEngine
can use this feature. The _postCreate() method display the
memory just after ToolEngine allocation.
* Change: In Etesian::EtesianEngine, make use of the ToolEngine
builtin timer (remove the local one). Forgot to call the base
class _postCreate() and _preDestroy().
* Change: In Anabatic::AnabaticEngine, make use of the ToolEngine
builtin timer (remove the local one).
* New: In Anabatic, new AutoSegments_Connecteds() collection. This
Collection allows a deterministic walkthough *all* the AutoSegments
connected either to source or target of one AutoSegment.
* New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an
AutoContactTerminal is the *only one* anchored on a RoutingPad,
thus being a true "end point" and not a kind of feed-through.
* New: In Katana::KatanaEngine, added support for symmetric nets.
Created new class DataSymmetric to store symmetric information
of a net (mainly the paired AutoSegments).
Added KatanaEngine::runSymmetricRouter(), for now only build
the DataSymmetric informations. More to come...
* Change: In Katana::GraphicKatanaEngine::_runTest(), now perform
symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
|
|
|
}
|
2017-02-24 07:37:11 -06:00
|
|
|
}
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
2017-02-24 07:37:11 -06:00
|
|
|
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
void GraphicKatanaEngine::_dumpMeasures ()
|
|
|
|
{
|
|
|
|
KatanaEngine* katana = getForFramework( NoFlags );
|
|
|
|
if (katana) katana->dumpMeasures();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_save ()
|
|
|
|
{
|
|
|
|
Cell* cell = getCell();
|
|
|
|
AllianceFramework* af = AllianceFramework::get();
|
|
|
|
|
|
|
|
string name = getString(cell->getName()) + "_katana";
|
|
|
|
cell->setName( name );
|
|
|
|
af->saveCell( cell, Catalog::State::Physical );
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_detailRoute ()
|
|
|
|
{
|
|
|
|
_loadGlobalRouting ();
|
|
|
|
//Breakpoint::stop( 0, "Global routing loaded." );
|
|
|
|
_balanceGlobalDensity();
|
|
|
|
//Breakpoint::stop( 0, "Global density balanced." );
|
|
|
|
_runNegociate ();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::_route ()
|
|
|
|
{
|
|
|
|
_runNegociatePreRouted();
|
|
|
|
_globalRoute ();
|
|
|
|
_detailRoute ();
|
|
|
|
_finalize ();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::postEvent ()
|
|
|
|
{
|
Replace "unsigned int" by "Flags" in all AutoSegments collections.
* Change: In Anabatic::AutoSegments collections, change the type of all
the flags that where in "unsigned int" (32 bits) to Flags (uint64_t)
as there is now more than 32 flags for functions.
* New: In Ababatic::Constants, added new flag Flags::WithPerpands, which
makes the number of flags tip over 32 bits, thus making mandatory
to uses Flags and not unsigned int.
* New: In Anabatic::AutoSegments_Perpandiculars, manage a new flag
Flags::WithDoglegs to allow to propagate through global segments that
are connecteds via doglegs on local segments. Meaning that there is
a good chance that they could be aligned.
Slighly change the way we propagate on aligned segments: no longer
check for VTee or HTee, but only for same direction and layer as
master.
* New: In Anabatic & Katana, replace all the "int", "long" and their
variants by the less implementation ambiguous "int32_t", "int64_t"
(and variant). This should help to better detect bit trucation in
flags.
Use the type to give a hint about the flags kind:
- Type "Flags", for flags shared among Anabatic & Katana
functions/methods (may also appear in some objects states).
- Type "uint32_t" for flags belonging to an object internal
state of from Hurricane functions flags (those should be
grouped in a Flag subclass in a perfect world).
2017-05-16 07:53:33 -05:00
|
|
|
static uint32_t count = 0;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
if (not (count++ % 500)) {
|
|
|
|
QApplication::processEvents();
|
|
|
|
|
|
|
|
if (_viewer->isToolInterrupted()) {
|
|
|
|
KatanaEngine* katana = KatanaEngine::get( getCell() );
|
|
|
|
if (katana) katana->setInterrupt( true );
|
|
|
|
_viewer->clearToolInterrupt();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void GraphicKatanaEngine::addToMenu ( CellViewer* viewer )
|
|
|
|
{
|
|
|
|
assert( _viewer == NULL );
|
|
|
|
|
|
|
|
_viewer = viewer;
|
|
|
|
|
|
|
|
if (_viewer->hasMenuAction("placeAndRoute.katana.route")) {
|
|
|
|
cerr << Warning( "GraphicKatanaEngine::addToMenu() - Katana detailed router already hooked in." ) << endl;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
_viewer->addMenu ( "placeAndRoute.katana" , "Katana" );
|
|
|
|
_viewer->addMenu ( "placeAndRoute.katana.stepByStep", "&Step by step" );
|
|
|
|
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.route"
|
|
|
|
, "Katana - &Route"
|
|
|
|
, "Route the design (global & detailed)"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_route,this)
|
|
|
|
);
|
|
|
|
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.========" );
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.detailedPreRoute"
|
|
|
|
, "Katana - Detailed Pre-Route"
|
|
|
|
, "Run the <b>Katana</b> detailed router on pre-routed nets"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_runNegociatePreRouted,this)
|
|
|
|
);
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.globalRoute"
|
|
|
|
, "Katana - &Global Route"
|
2016-09-10 11:49:48 -05:00
|
|
|
, "Run the <b>Katana</b> global router"
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
, std::bind(&GraphicKatanaEngine::_globalRoute,this)
|
|
|
|
);
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.detailedRoute"
|
|
|
|
, "Katana - &Detailed Route"
|
|
|
|
, "Run the <b>Katana</b> detailed router"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_detailRoute,this)
|
|
|
|
);
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.finalize"
|
|
|
|
, "Katana - &Finalize Routing"
|
|
|
|
, "Closing Routing"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_finalize,this)
|
|
|
|
);
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.dumpMeasures"
|
|
|
|
, "Katana - Dump &Measures"
|
|
|
|
, "Dumping Measurements on the disk"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_dumpMeasures,this)
|
|
|
|
);
|
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.save"
|
|
|
|
, "Katana - &Save Design"
|
|
|
|
, "Save routed design (temporary hack)"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_save,this)
|
|
|
|
);
|
2017-05-26 06:32:30 -05:00
|
|
|
#if NO_NEED_OF_IT_NOW
|
2017-02-24 07:37:11 -06:00
|
|
|
_viewer->addToMenu( "placeAndRoute.katana.stepByStep.runTest"
|
|
|
|
, "Katana - Run &Test"
|
|
|
|
, "Run Test Program (symmetric routing of gmChamla)"
|
|
|
|
, std::bind(&GraphicKatanaEngine::_runTest,this)
|
|
|
|
);
|
2017-05-26 06:32:30 -05:00
|
|
|
#endif
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
const Name& GraphicKatanaEngine::getName () const
|
|
|
|
{ return KatanaEngine::staticGetName(); }
|
|
|
|
|
|
|
|
|
|
|
|
Cell* GraphicKatanaEngine::getCell ()
|
|
|
|
{
|
|
|
|
if (_viewer == NULL) {
|
|
|
|
throw Error( "<b>Katana:</b> GraphicKatanaEngine not bound to any Viewer." );
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (_viewer->getCell() == NULL) {
|
|
|
|
throw Error( "<b>Katana:</b> No Cell is loaded into the Viewer." );
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return _viewer->getCell();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
GraphicKatanaEngine* GraphicKatanaEngine::grab ()
|
|
|
|
{
|
|
|
|
if (not _references) {
|
|
|
|
_singleton = new GraphicKatanaEngine ();
|
|
|
|
}
|
|
|
|
_references++;
|
|
|
|
|
|
|
|
return _singleton;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
size_t GraphicKatanaEngine::release ()
|
|
|
|
{
|
|
|
|
--_references;
|
|
|
|
if (not _references) {
|
|
|
|
delete _singleton;
|
|
|
|
_singleton = NULL;
|
|
|
|
}
|
|
|
|
return _references;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
GraphicKatanaEngine::GraphicKatanaEngine ()
|
|
|
|
: GraphicTool()
|
|
|
|
, _viewer (NULL)
|
2016-09-07 04:21:36 -05:00
|
|
|
{
|
|
|
|
addDrawGo( "Anabatic::GCell", initGCell, drawGCell );
|
|
|
|
addDrawGo( "Anabatic::Edge" , initEdge , drawEdge );
|
|
|
|
}
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
|
|
|
GraphicKatanaEngine::~GraphicKatanaEngine ()
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
} // Katana namespace.
|