1226 lines
64 KiB
C++
1226 lines
64 KiB
C++
/********************************************************************
|
|
* This file includes functions to print Verilog modules for a Grid
|
|
* (CLBs, I/Os, heterogeneous blocks etc.)
|
|
*******************************************************************/
|
|
#include <ctime>
|
|
#include <vector>
|
|
|
|
/* Headers from vtrutil library */
|
|
#include "vtr_geometry.h"
|
|
#include "vtr_log.h"
|
|
#include "vtr_assert.h"
|
|
#include "vtr_time.h"
|
|
|
|
/* Headers from vpr library */
|
|
#include "vpr_utils.h"
|
|
|
|
#include "circuit_library_utils.h"
|
|
#include "openfpga_reserved_words.h"
|
|
#include "openfpga_naming.h"
|
|
#include "openfpga_interconnect_types.h"
|
|
#include "openfpga_physical_tile_utils.h"
|
|
#include "pb_type_utils.h"
|
|
#include "pb_graph_utils.h"
|
|
#include "module_manager_utils.h"
|
|
|
|
#include "build_grid_module_utils.h"
|
|
#include "build_grid_module_duplicated_pins.h"
|
|
#include "build_grid_modules.h"
|
|
|
|
/* begin namespace openfpga */
|
|
namespace openfpga {
|
|
|
|
/********************************************************************
|
|
* Add ports/pins to a grid module
|
|
* This function will iterate over all the pins that are defined
|
|
* in type_descripter and give a name by its height, side and index
|
|
*
|
|
* In particular, for I/O grid, only part of the ports on required
|
|
* on a specific side.
|
|
*******************************************************************/
|
|
static
|
|
void add_grid_module_pb_type_ports(ModuleManager& module_manager,
|
|
const ModuleId& grid_module,
|
|
const VprDeviceAnnotation& vpr_device_annotation,
|
|
t_physical_tile_type_ptr grid_type_descriptor,
|
|
const e_side& border_side) {
|
|
/* Ensure that we have a valid grid_type_descriptor */
|
|
VTR_ASSERT(nullptr != grid_type_descriptor);
|
|
|
|
/* Find the pin side for I/O grids*/
|
|
std::vector<e_side> grid_pin_sides;
|
|
/* For I/O grids, we care only one side
|
|
* Otherwise, we will iterate all the 4 sides
|
|
*/
|
|
if (true == is_io_type(grid_type_descriptor)) {
|
|
grid_pin_sides = find_grid_module_pin_sides(grid_type_descriptor, border_side);
|
|
} else {
|
|
grid_pin_sides = {TOP, RIGHT, BOTTOM, LEFT};
|
|
}
|
|
|
|
/* Create a map between pin class type and grid pin direction */
|
|
std::map<e_pin_type, ModuleManager::e_module_port_type> pin_type2type_map;
|
|
pin_type2type_map[RECEIVER] = ModuleManager::MODULE_INPUT_PORT;
|
|
pin_type2type_map[DRIVER] = ModuleManager::MODULE_OUTPUT_PORT;
|
|
|
|
/* Iterate over sides, height and pins */
|
|
for (const e_side& side : grid_pin_sides) {
|
|
for (int iwidth = 0; iwidth < grid_type_descriptor->width; ++iwidth) {
|
|
for (int iheight = 0; iheight < grid_type_descriptor->height; ++iheight) {
|
|
for (int ipin = 0; ipin < grid_type_descriptor->num_pins; ++ipin) {
|
|
if (true != grid_type_descriptor->pinloc[iwidth][iheight][side][ipin]) {
|
|
continue;
|
|
}
|
|
/* Reach here, it means this pin is on this side */
|
|
int class_id = grid_type_descriptor->pin_class[ipin];
|
|
e_pin_type pin_class_type = grid_type_descriptor->class_inf[class_id].type;
|
|
/* Generate the pin name,
|
|
* we give a empty coordinate but it will not be used (see details in the function
|
|
*/
|
|
BasicPort pin_info = vpr_device_annotation.physical_tile_pin_port_info(grid_type_descriptor, ipin);
|
|
VTR_ASSERT(true == pin_info.is_valid());
|
|
int subtile_index = vpr_device_annotation.physical_tile_pin_subtile_index(grid_type_descriptor, ipin);
|
|
VTR_ASSERT(OPEN != subtile_index && subtile_index < grid_type_descriptor->capacity);
|
|
std::string port_name = generate_grid_port_name(iwidth, iheight, subtile_index, side, pin_info);
|
|
BasicPort grid_port(port_name, 0, 0);
|
|
/* Add the port to the module */
|
|
module_manager.add_port(grid_module, grid_port, pin_type2type_map[pin_class_type]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* Add module nets to connect ports/pins of a grid module
|
|
* to its child modules
|
|
* This function will iterate over all the pins that are defined
|
|
* in type_descripter and find the corresponding pin in the top
|
|
* pb_graph_node of the grid
|
|
*******************************************************************/
|
|
static
|
|
void add_grid_module_nets_connect_pb_type_ports(ModuleManager& module_manager,
|
|
const ModuleId& grid_module,
|
|
const ModuleId& child_module,
|
|
const size_t& child_instance,
|
|
const VprDeviceAnnotation& vpr_device_annotation,
|
|
t_physical_tile_type_ptr grid_type_descriptor,
|
|
const e_side& border_side) {
|
|
/* Ensure that we have a valid grid_type_descriptor */
|
|
VTR_ASSERT(nullptr != grid_type_descriptor);
|
|
|
|
for (t_logical_block_type_ptr lb_type : grid_type_descriptor->equivalent_sites) {
|
|
t_pb_graph_node* top_pb_graph_node = lb_type->pb_graph_head;
|
|
VTR_ASSERT(nullptr != top_pb_graph_node);
|
|
|
|
for (int iport = 0; iport < top_pb_graph_node->num_input_ports; ++iport) {
|
|
for (int ipin = 0; ipin < top_pb_graph_node->num_input_pins[iport]; ++ipin) {
|
|
add_grid_module_net_connect_pb_graph_pin(module_manager, grid_module,
|
|
child_module, child_instance,
|
|
vpr_device_annotation,
|
|
grid_type_descriptor,
|
|
&(top_pb_graph_node->input_pins[iport][ipin]),
|
|
border_side,
|
|
INPUT2INPUT_INTERC);
|
|
|
|
}
|
|
}
|
|
|
|
for (int iport = 0; iport < top_pb_graph_node->num_output_ports; ++iport) {
|
|
for (int ipin = 0; ipin < top_pb_graph_node->num_output_pins[iport]; ++ipin) {
|
|
add_grid_module_net_connect_pb_graph_pin(module_manager, grid_module,
|
|
child_module, child_instance,
|
|
vpr_device_annotation,
|
|
grid_type_descriptor,
|
|
&(top_pb_graph_node->output_pins[iport][ipin]),
|
|
border_side,
|
|
OUTPUT2OUTPUT_INTERC);
|
|
}
|
|
}
|
|
|
|
for (int iport = 0; iport < top_pb_graph_node->num_clock_ports; ++iport) {
|
|
for (int ipin = 0; ipin < top_pb_graph_node->num_clock_pins[iport]; ++ipin) {
|
|
add_grid_module_net_connect_pb_graph_pin(module_manager, grid_module,
|
|
child_module, child_instance,
|
|
vpr_device_annotation,
|
|
grid_type_descriptor,
|
|
&(top_pb_graph_node->clock_pins[iport][ipin]),
|
|
border_side,
|
|
INPUT2INPUT_INTERC);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* Add module nets between primitive module and its internal circuit module
|
|
* This is only applicable to the primitive module of a grid
|
|
*******************************************************************/
|
|
static
|
|
void add_primitive_module_fpga_global_io_port(ModuleManager& module_manager,
|
|
const ModuleId& primitive_module,
|
|
const ModuleId& logic_module,
|
|
const size_t& logic_instance_id,
|
|
const ModuleManager::e_module_port_type& module_io_port_type,
|
|
const CircuitLibrary& circuit_lib,
|
|
const CircuitModelId& primitive_model,
|
|
const CircuitPortId& circuit_port) {
|
|
BasicPort module_port(generate_fpga_global_io_port_name(std::string(GIO_INOUT_PREFIX), circuit_lib, primitive_model, circuit_port), circuit_lib.port_size(circuit_port));
|
|
ModulePortId primitive_io_port_id = module_manager.add_port(primitive_module, module_port, module_io_port_type);
|
|
/* Set if the port is mappable or not */
|
|
if (true == circuit_lib.port_is_data_io(circuit_port)) {
|
|
module_manager.set_port_is_mappable_io(primitive_module, primitive_io_port_id, true);
|
|
}
|
|
|
|
ModulePortId logic_io_port_id = module_manager.find_module_port(logic_module, circuit_lib.port_prefix(circuit_port));
|
|
BasicPort logic_io_port = module_manager.module_port(logic_module, logic_io_port_id);
|
|
VTR_ASSERT(logic_io_port.get_width() == module_port.get_width());
|
|
|
|
/* Wire the GPIO port from primitive_module to the logic module!*/
|
|
for (size_t pin_id = 0; pin_id < module_port.pins().size(); ++pin_id) {
|
|
if ( (ModuleManager::MODULE_GPIO_PORT == module_io_port_type)
|
|
|| (ModuleManager::MODULE_GPIN_PORT == module_io_port_type) ) {
|
|
bool net_exist = true;
|
|
/* If the source port has already a net to drive, we just update the net sinks */
|
|
ModuleNetId net = module_manager.module_instance_port_net(primitive_module, primitive_module, 0, primitive_io_port_id, module_port.pins()[pin_id]);
|
|
if (net == ModuleNetId::INVALID()) {
|
|
net_exist = false;
|
|
net = module_manager.create_module_net(primitive_module);
|
|
}
|
|
|
|
if (false == net_exist) {
|
|
module_manager.add_module_net_source(primitive_module, net, primitive_module, 0, primitive_io_port_id, module_port.pins()[pin_id]);
|
|
}
|
|
module_manager.add_module_net_sink(primitive_module, net, logic_module, logic_instance_id, logic_io_port_id, logic_io_port.pins()[pin_id]);
|
|
} else {
|
|
bool net_exist = true;
|
|
/* If the source port has already a net to drive, we just update the net sinks */
|
|
ModuleNetId net = module_manager.module_instance_port_net(primitive_module, logic_module, logic_instance_id, logic_io_port_id, logic_io_port.pins()[pin_id]);
|
|
if (net == ModuleNetId::INVALID()) {
|
|
net_exist = false;
|
|
net = module_manager.create_module_net(primitive_module);
|
|
}
|
|
|
|
VTR_ASSERT(ModuleManager::MODULE_GPOUT_PORT == module_io_port_type);
|
|
|
|
if (false == net_exist) {
|
|
module_manager.add_module_net_source(primitive_module, net, logic_module, logic_instance_id, logic_io_port_id, logic_io_port.pins()[pin_id]);
|
|
}
|
|
module_manager.add_module_net_sink(primitive_module, net, primitive_module, 0, primitive_io_port_id, module_port.pins()[pin_id]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* Print Verilog modules of a primitive node in the pb_graph_node graph
|
|
* This generic function can support all the different types of primitive nodes
|
|
* i.e., Look-Up Tables (LUTs), Flip-flops (FFs) and hard logic blocks such as adders.
|
|
*
|
|
* The Verilog module will consist of two parts:
|
|
* 1. Logic module of the primitive node
|
|
* This module performs the logic function of the block
|
|
* 2. Memory module of the primitive node
|
|
* This module stores the configuration bits for the logic module
|
|
* if the logic module is a programmable resource, such as LUT
|
|
*
|
|
* Verilog module structure:
|
|
*
|
|
* Primitive block
|
|
* +---------------------------------------+
|
|
* | |
|
|
* | +---------+ +---------+ |
|
|
* in |----->| |--->| |<------|configuration lines
|
|
* | | Logic |... | Memory | |
|
|
* out|<-----| |--->| | |
|
|
* | +---------+ +---------+ |
|
|
* | |
|
|
* +---------------------------------------+
|
|
*
|
|
*******************************************************************/
|
|
static
|
|
void build_primitive_block_module(ModuleManager& module_manager,
|
|
DecoderLibrary& decoder_lib,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
const e_config_protocol_type& sram_orgz_type,
|
|
const CircuitModelId& sram_model,
|
|
t_pb_graph_node* primitive_pb_graph_node,
|
|
const bool& verbose) {
|
|
/* Ensure a valid pb_graph_node */
|
|
VTR_ASSERT(nullptr != primitive_pb_graph_node);
|
|
|
|
/* Find the circuit model id linked to the pb_graph_node */
|
|
const CircuitModelId& primitive_model = device_annotation.pb_type_circuit_model(primitive_pb_graph_node->pb_type);
|
|
|
|
/* Generate the module name for this primitive pb_graph_node*/
|
|
std::string primitive_module_name = generate_physical_block_module_name(primitive_pb_graph_node->pb_type);
|
|
|
|
VTR_LOGV(verbose,
|
|
"Building module '%s'...",
|
|
primitive_module_name.c_str());
|
|
|
|
/* Create a module of the primitive LUT and register it to module manager */
|
|
ModuleId primitive_module = module_manager.add_module(primitive_module_name);
|
|
/* Ensure that the module has been created and thus unique! */
|
|
VTR_ASSERT(ModuleId::INVALID() != primitive_module);
|
|
|
|
/* Label module usage */
|
|
module_manager.set_module_usage(primitive_module, ModuleManager::MODULE_GRID);
|
|
|
|
/* Note: to cooperate with the pb_type hierarchy and connections, we add the port of primitive pb_type here.
|
|
* Since we have linked pb_type ports to circuit models when setting up FPGA-X2P,
|
|
* no ports of the circuit model will be missing here
|
|
*/
|
|
add_primitive_pb_type_ports_to_module_manager(module_manager, primitive_module,
|
|
primitive_pb_graph_node->pb_type, device_annotation);
|
|
|
|
/* Add configuration ports */
|
|
/* Shared SRAM ports*/
|
|
size_t num_shared_config_bits = find_circuit_num_shared_config_bits(circuit_lib, primitive_model, sram_orgz_type);
|
|
if (0 < num_shared_config_bits) {
|
|
/* Check: this SRAM organization type must be memory-bank ! */
|
|
VTR_ASSERT( CONFIG_MEM_MEMORY_BANK == sram_orgz_type || CONFIG_MEM_QL_MEMORY_BANK == sram_orgz_type );
|
|
/* Generate a list of ports */
|
|
add_reserved_sram_ports_to_module_manager(module_manager, primitive_module,
|
|
num_shared_config_bits);
|
|
}
|
|
|
|
/* Regular (independent) SRAM ports */
|
|
size_t num_config_bits = find_circuit_num_config_bits(sram_orgz_type, circuit_lib, primitive_model);
|
|
if (0 < num_config_bits) {
|
|
add_sram_ports_to_module_manager(module_manager, primitive_module,
|
|
circuit_lib, sram_model, sram_orgz_type,
|
|
num_config_bits);
|
|
}
|
|
|
|
/* Find the module id in the module manager */
|
|
ModuleId logic_module = module_manager.find_module(circuit_lib.model_name(primitive_model));
|
|
VTR_ASSERT(ModuleId::INVALID() != logic_module);
|
|
size_t logic_instance_id = module_manager.num_instance(primitive_module, logic_module);
|
|
/* Add the logic module as a child of primitive module */
|
|
module_manager.add_child_module(primitive_module, logic_module);
|
|
|
|
/* Add nets to connect the logic model ports to pb_type ports */
|
|
add_primitive_pb_type_module_nets(module_manager, primitive_module,
|
|
logic_module, logic_instance_id,
|
|
circuit_lib, primitive_pb_graph_node->pb_type,
|
|
device_annotation);
|
|
|
|
/* Add the associated memory module as a child of primitive module */
|
|
std::string memory_module_name = generate_memory_module_name(circuit_lib, primitive_model, sram_model, std::string(MEMORY_MODULE_POSTFIX));
|
|
ModuleId memory_module = module_manager.find_module(memory_module_name);
|
|
|
|
/* If there is no memory module required, we can skip the assocated net addition */
|
|
if (ModuleId::INVALID() != memory_module) {
|
|
size_t memory_instance_id = module_manager.num_instance(primitive_module, memory_module);
|
|
/* Add the memory module as a child of primitive module */
|
|
module_manager.add_child_module(primitive_module, memory_module);
|
|
/* Set an instance name to bind to a block in bitstream generation */
|
|
module_manager.set_child_instance_name(primitive_module, memory_module, memory_instance_id, memory_module_name);
|
|
|
|
/* Add nets to connect regular and mode-select SRAM ports to the SRAM port of memory module */
|
|
add_module_nets_between_logic_and_memory_sram_bus(module_manager, primitive_module,
|
|
logic_module, logic_instance_id,
|
|
memory_module, memory_instance_id,
|
|
circuit_lib, primitive_model);
|
|
/* Record memory-related information */
|
|
module_manager.add_configurable_child(primitive_module, memory_module, memory_instance_id);
|
|
}
|
|
|
|
/* Add all the nets to connect configuration ports from memory module to primitive modules
|
|
* This is a one-shot addition that covers all the memory modules in this primitive module!
|
|
*/
|
|
if (0 < module_manager.configurable_children(primitive_module).size()) {
|
|
add_module_nets_memory_config_bus(module_manager, decoder_lib, primitive_module,
|
|
sram_orgz_type, circuit_lib.design_tech_type(sram_model));
|
|
}
|
|
|
|
/* Add global ports to the pb_module:
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the global ports from the child modules and build a list of it
|
|
*/
|
|
add_module_global_ports_from_child_modules(module_manager, primitive_module);
|
|
|
|
/* Find the inout ports required by the primitive node, and add them to the module
|
|
* This is mainly due to the I/O blocks, which have inout ports for the top-level fabric
|
|
*/
|
|
for (const auto& port : circuit_lib.model_global_ports(primitive_model, false)) {
|
|
if ( (CIRCUIT_MODEL_PORT_INOUT == circuit_lib.port_type(port))
|
|
&& (true == circuit_lib.port_is_io(port)) ) {
|
|
add_primitive_module_fpga_global_io_port(module_manager, primitive_module,
|
|
logic_module, logic_instance_id,
|
|
ModuleManager::MODULE_GPIO_PORT,
|
|
circuit_lib,
|
|
primitive_model,
|
|
port);
|
|
} else if ( (CIRCUIT_MODEL_PORT_INPUT == circuit_lib.port_type(port))
|
|
&& (true == circuit_lib.port_is_io(port)) ) {
|
|
add_primitive_module_fpga_global_io_port(module_manager, primitive_module,
|
|
logic_module, logic_instance_id,
|
|
ModuleManager::MODULE_GPIN_PORT,
|
|
circuit_lib,
|
|
primitive_model,
|
|
port);
|
|
} else if (CIRCUIT_MODEL_PORT_OUTPUT == circuit_lib.port_type(port)) {
|
|
add_primitive_module_fpga_global_io_port(module_manager, primitive_module,
|
|
logic_module, logic_instance_id,
|
|
ModuleManager::MODULE_GPOUT_PORT,
|
|
circuit_lib,
|
|
primitive_model,
|
|
port);
|
|
}
|
|
}
|
|
|
|
VTR_LOGV(verbose, "Done\n");
|
|
}
|
|
|
|
/********************************************************************
|
|
* This function add a net for a pin-to-pin connection defined in pb_graph
|
|
* It supports two cases for the pin-to-pin connection
|
|
* 1. The net source is a pb_graph_pin while the net sink is a pin of an interconnection
|
|
* 2. The net source is a pin of an interconnection while the net sink a pb_graph_pin
|
|
* The type is enabled by an argument pin2pin_interc_type
|
|
*******************************************************************/
|
|
static
|
|
void add_module_pb_graph_pin2pin_net(ModuleManager& module_manager,
|
|
const ModuleId& pb_module,
|
|
const ModuleId& interc_module,
|
|
const size_t& interc_instance,
|
|
const std::string& interc_port_name,
|
|
const size_t& interc_pin_id,
|
|
t_pb_graph_pin* pb_graph_pin,
|
|
const enum e_pin2pin_interc_type& pin2pin_interc_type) {
|
|
|
|
ModuleNetId pin2pin_net = module_manager.create_module_net(pb_module);
|
|
|
|
/* Find port and pin ids for the module, which is the parent of pb_graph_pin */
|
|
t_pb_type* pin_pb_type = pb_graph_pin->parent_node->pb_type;
|
|
/* Find the module contains the source pin */
|
|
ModuleId pin_pb_type_module = module_manager.find_module(generate_physical_block_module_name(pin_pb_type));
|
|
VTR_ASSERT(true == module_manager.valid_module_id(pin_pb_type_module));
|
|
size_t pin_pb_type_instance = 0; /* Deposite the instance with a zero, which is the default value is the source module is actually pb_module itself */
|
|
if (pin_pb_type_module != pb_module) {
|
|
pin_pb_type_instance = pb_graph_pin->parent_node->placement_index;
|
|
/* Ensure this is an valid instance */
|
|
VTR_ASSERT(pin_pb_type_instance < module_manager.num_instance(pb_module, pin_pb_type_module));
|
|
}
|
|
ModulePortId pin_module_port_id = module_manager.find_module_port(pin_pb_type_module, generate_pb_type_port_name(pb_graph_pin->port));
|
|
VTR_ASSERT(true == module_manager.valid_module_port_id(pin_pb_type_module, pin_module_port_id));
|
|
size_t pin_module_pin_id = pb_graph_pin->pin_number;
|
|
/* Ensure this is an valid pin index */
|
|
VTR_ASSERT(pin_module_pin_id < module_manager.module_port(pin_pb_type_module, pin_module_port_id).get_width());
|
|
|
|
/* Find port and pin ids for the interconnection module */
|
|
ModulePortId interc_port_id = module_manager.find_module_port(interc_module, interc_port_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_port_id(interc_module, interc_port_id));
|
|
/* Ensure this is an valid pin index */
|
|
VTR_ASSERT(interc_pin_id < module_manager.module_port(interc_module, interc_port_id).get_width());
|
|
|
|
/* Add net sources and sinks:
|
|
* For input-to-input connection, net_source is pin_graph_pin, while net_sink is interc pin
|
|
* For output-to-output connection, net_source is interc pin, while net_sink is pin_graph pin
|
|
*/
|
|
switch (pin2pin_interc_type) {
|
|
case INPUT2INPUT_INTERC:
|
|
module_manager.add_module_net_source(pb_module, pin2pin_net, pin_pb_type_module, pin_pb_type_instance, pin_module_port_id, pin_module_pin_id);
|
|
module_manager.add_module_net_sink(pb_module, pin2pin_net, interc_module, interc_instance, interc_port_id, interc_pin_id);
|
|
break;
|
|
case OUTPUT2OUTPUT_INTERC:
|
|
module_manager.add_module_net_source(pb_module, pin2pin_net, interc_module, interc_instance, interc_port_id, interc_pin_id);
|
|
module_manager.add_module_net_sink(pb_module, pin2pin_net, pin_pb_type_module, pin_pb_type_instance, pin_module_port_id, pin_module_pin_id);
|
|
break;
|
|
default:
|
|
VTR_LOGF_ERROR(__FILE__, __LINE__,
|
|
"Invalid pin-to-pin interconnection type!\n");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* We check output_pins of cur_pb_graph_node and its the input_edges
|
|
* Built the interconnections between outputs of cur_pb_graph_node and outputs of child_pb_graph_node
|
|
* src_pb_graph_node.[in|out]_pins -----------------> des_pb_graph_node.[in|out]pins
|
|
* /|\
|
|
* |
|
|
* input_pins, edges, output_pins
|
|
*
|
|
* This function does the following task:
|
|
* 1. identify pin interconnection type,
|
|
* 2. Identify the number of fan-in (Consider interconnection edges of only selected mode)
|
|
* 3. Add mux/direct connection as a child module to pb_module
|
|
* 4. Add nets related to the mux/direction
|
|
*******************************************************************/
|
|
static
|
|
void add_module_pb_graph_pin_interc(ModuleManager& module_manager,
|
|
const ModuleId& pb_module,
|
|
std::vector<ModuleId>& memory_modules,
|
|
std::vector<size_t>& memory_instances,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
t_pb_graph_pin* des_pb_graph_pin,
|
|
t_mode* physical_mode) {
|
|
/* Find the number of fan-in and detailed interconnection information
|
|
* related to the destination pb_graph_pin
|
|
*/
|
|
t_interconnect* cur_interc = pb_graph_pin_interc(des_pb_graph_pin, physical_mode);
|
|
size_t fan_in = pb_graph_pin_inputs(des_pb_graph_pin, cur_interc).size();
|
|
|
|
/* If no interconnection is needed, we can return early */
|
|
if ((nullptr == cur_interc) || (0 == fan_in)) {
|
|
return;
|
|
}
|
|
|
|
/* Initialize the interconnection type that will be physically implemented in module */
|
|
enum e_interconnect interc_type = device_annotation.interconnect_physical_type(cur_interc);
|
|
const CircuitModelId& interc_circuit_model = device_annotation.interconnect_circuit_model(cur_interc);
|
|
|
|
/* Find input ports of the wire module */
|
|
std::vector<CircuitPortId> interc_model_inputs = circuit_lib.model_ports_by_type(interc_circuit_model, CIRCUIT_MODEL_PORT_INPUT, true); /* the last argument to guarantee that we ignore any global inputs */
|
|
/* Find output ports of the wire module */
|
|
std::vector<CircuitPortId> interc_model_outputs = circuit_lib.model_ports_by_type(interc_circuit_model, CIRCUIT_MODEL_PORT_OUTPUT, true); /* the last argument to guarantee that we ignore any global ports */
|
|
|
|
/* Ensure that we have only 1 input port and 1 output port, this is valid for both wire and MUX */
|
|
VTR_ASSERT(1 == interc_model_inputs.size());
|
|
VTR_ASSERT(1 == interc_model_outputs.size());
|
|
|
|
/* Branch on the type of physical implementation,
|
|
* We add instances of programmable interconnection
|
|
*/
|
|
switch (interc_type) {
|
|
case DIRECT_INTERC: {
|
|
/* Ensure direct interc has only one fan-in */
|
|
VTR_ASSERT(1 == fan_in);
|
|
|
|
/* For more than one mode defined, the direct interc has more than one input_edge ,
|
|
* We need to find which edge is connected the pin we want
|
|
*/
|
|
t_pb_graph_pin* src_pb_graph_pin = pb_graph_pin_inputs(des_pb_graph_pin, cur_interc)[0];
|
|
|
|
/* Ensure that circuit model is a wire */
|
|
VTR_ASSERT(CIRCUIT_MODEL_WIRE == circuit_lib.model_type(interc_circuit_model));
|
|
/* Find the wire module in the module manager */
|
|
ModuleId wire_module = module_manager.find_module(circuit_lib.model_name(interc_circuit_model));
|
|
VTR_ASSERT(true == module_manager.valid_module_id(wire_module));
|
|
/* Get the instance id and add an instance of wire */
|
|
size_t wire_instance = module_manager.num_instance(pb_module, wire_module);
|
|
module_manager.add_child_module(pb_module, wire_module);
|
|
|
|
/* Give an instance name: this name should be consistent with the block name given in SDC generator,
|
|
* If you want to bind the SDC generation to modules
|
|
*/
|
|
std::string wire_instance_name = generate_instance_name(module_manager.module_name(wire_module), wire_instance);
|
|
module_manager.set_child_instance_name(pb_module, wire_module, wire_instance, wire_instance_name);
|
|
|
|
/* Ensure input and output ports of the wire model has only 1 pin respectively */
|
|
VTR_ASSERT(1 == circuit_lib.port_size(interc_model_inputs[0]));
|
|
VTR_ASSERT(1 == circuit_lib.port_size(interc_model_outputs[0]));
|
|
|
|
/* Add nets to connect the wires to ports of pb_module */
|
|
/* First net is to connect input of src_pb_graph_node to input of the wire module */
|
|
add_module_pb_graph_pin2pin_net(module_manager, pb_module,
|
|
wire_module, wire_instance,
|
|
circuit_lib.port_prefix(interc_model_inputs[0]),
|
|
0, /* wire input port has only 1 pin */
|
|
src_pb_graph_pin,
|
|
INPUT2INPUT_INTERC);
|
|
|
|
/* Second net is to connect output of the wire module to output of des_pb_graph_pin */
|
|
add_module_pb_graph_pin2pin_net(module_manager, pb_module,
|
|
wire_module, wire_instance,
|
|
circuit_lib.port_prefix(interc_model_outputs[0]),
|
|
0, /* wire output port has only 1 pin */
|
|
des_pb_graph_pin,
|
|
OUTPUT2OUTPUT_INTERC);
|
|
break;
|
|
}
|
|
case COMPLETE_INTERC:
|
|
case MUX_INTERC: {
|
|
/* Check: MUX should have at least 2 fan_in */
|
|
VTR_ASSERT((2 == fan_in)||(2 < fan_in));
|
|
/* Ensure that circuit model is a MUX */
|
|
VTR_ASSERT(CIRCUIT_MODEL_MUX == circuit_lib.model_type(interc_circuit_model));
|
|
/* Find the wire module in the module manager */
|
|
ModuleId mux_module = module_manager.find_module(generate_mux_subckt_name(circuit_lib, interc_circuit_model, fan_in, std::string()));
|
|
VTR_ASSERT(true == module_manager.valid_module_id(mux_module));
|
|
|
|
/* Instanciate the MUX */
|
|
size_t mux_instance = module_manager.num_instance(pb_module, mux_module);
|
|
module_manager.add_child_module(pb_module, mux_module);
|
|
/* Give an instance name: this name should be consistent with the block name given in SDC generator,
|
|
* If you want to bind the SDC generation to modules
|
|
*/
|
|
std::string mux_instance_name = generate_pb_mux_instance_name(GRID_MUX_INSTANCE_PREFIX, des_pb_graph_pin, std::string(""));
|
|
module_manager.set_child_instance_name(pb_module, mux_module, mux_instance, mux_instance_name);
|
|
|
|
/* Instanciate a memory module for the MUX */
|
|
std::string mux_mem_module_name = generate_mux_subckt_name(circuit_lib,
|
|
interc_circuit_model,
|
|
fan_in,
|
|
std::string(MEMORY_MODULE_POSTFIX));
|
|
ModuleId mux_mem_module = module_manager.find_module(mux_mem_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(mux_mem_module));
|
|
size_t mux_mem_instance = module_manager.num_instance(pb_module, mux_mem_module);
|
|
module_manager.add_child_module(pb_module, mux_mem_module);
|
|
/* Give an instance name: this name should be consistent with the block name given in bitstream manager,
|
|
* If you want to bind the bitstream generation to modules
|
|
*/
|
|
std::string mux_mem_instance_name = generate_pb_memory_instance_name(GRID_MEM_INSTANCE_PREFIX, des_pb_graph_pin, std::string(""));
|
|
module_manager.set_child_instance_name(pb_module, mux_mem_module, mux_mem_instance, mux_mem_instance_name);
|
|
/* Add this MUX as a configurable child to the pb_module */
|
|
module_manager.add_configurable_child(pb_module, mux_mem_module, mux_mem_instance);
|
|
|
|
/* Add nets to connect SRAM ports of the MUX to the SRAM port of memory module */
|
|
add_module_nets_between_logic_and_memory_sram_bus(module_manager, pb_module,
|
|
mux_module, mux_instance,
|
|
mux_mem_module, mux_mem_instance,
|
|
circuit_lib, interc_circuit_model);
|
|
|
|
/* Update memory modules and memory instance list */
|
|
memory_modules.push_back(mux_mem_module);
|
|
memory_instances.push_back(mux_mem_instance);
|
|
|
|
/* Ensure output port of the MUX model has only 1 pin,
|
|
* while the input port size is dependent on the architecture conext,
|
|
* no constaints on the circuit model definition
|
|
*/
|
|
VTR_ASSERT(1 == circuit_lib.port_size(interc_model_outputs[0]));
|
|
|
|
/* Create nets to wire between the MUX and PB module */
|
|
/* Add a net to wire the inputs of the multiplexer to its source pb_graph_pin inside pb_module
|
|
* Here is a tricky part.
|
|
* Not every input edges from the destination pb_graph_pin is used in the physical_model of pb_type
|
|
* So, we will skip these input edges when building nets
|
|
*/
|
|
size_t mux_input_pin_id = 0;
|
|
for (t_pb_graph_pin* src_pb_graph_pin : pb_graph_pin_inputs(des_pb_graph_pin, cur_interc)) {
|
|
/* Add a net, set its source and sink */
|
|
add_module_pb_graph_pin2pin_net(module_manager, pb_module,
|
|
mux_module, mux_instance,
|
|
circuit_lib.port_prefix(interc_model_inputs[0]),
|
|
mux_input_pin_id,
|
|
src_pb_graph_pin,
|
|
INPUT2INPUT_INTERC);
|
|
mux_input_pin_id++;
|
|
}
|
|
/* Ensure all the fan_in has been covered */
|
|
VTR_ASSERT(mux_input_pin_id == fan_in);
|
|
|
|
/* Add a net to wire the output of the multiplexer to des_pb_graph_pin */
|
|
add_module_pb_graph_pin2pin_net(module_manager, pb_module,
|
|
mux_module, mux_instance,
|
|
circuit_lib.port_prefix(interc_model_outputs[0]),
|
|
0, /* MUX should have only 1 pin in its output port */
|
|
des_pb_graph_pin,
|
|
OUTPUT2OUTPUT_INTERC);
|
|
break;
|
|
}
|
|
default:
|
|
VTR_LOGF_ERROR(__FILE__, __LINE__,
|
|
"Invalid interconnection type for %s [at Architecture XML LINE%d]!\n",
|
|
cur_interc->name, cur_interc->line_num);
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* Add modules and nets for programmable/non-programmable interconnections
|
|
* which end to a port of pb_module
|
|
* This function will add the following elements to a module
|
|
* 1. Instances of direct connections
|
|
* 2. Instances of programmable routing multiplexers
|
|
* 3. nets to connect direct connections/multiplexer
|
|
*
|
|
* +-----------------------------------------+
|
|
* |
|
|
* | +--------------+ +------------+
|
|
* |--->| |--->| |
|
|
* |... | Multiplexers |... | |
|
|
* |--->| |--->| |
|
|
* | +--------------+ | des_pb_ |
|
|
* | | graph_node |
|
|
* | +--------------+ | |
|
|
* |--->| |--->| |
|
|
* | ...| Direct |... | |
|
|
* |--->| Connections |--->| |
|
|
* | +--------------+ +------------+
|
|
* |
|
|
* +----------------------------------------+
|
|
|
|
*
|
|
* Note: this function should be run after ALL the child pb_modules
|
|
* have been added to the pb_module and ALL the ports defined
|
|
* in pb_type have been added to the pb_module!!!
|
|
*
|
|
********************************************************************/
|
|
static
|
|
void add_module_pb_graph_port_interc(ModuleManager& module_manager,
|
|
const ModuleId& pb_module,
|
|
std::vector<ModuleId>& memory_modules,
|
|
std::vector<size_t>& memory_instances,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
t_pb_graph_node* des_pb_graph_node,
|
|
const e_circuit_pb_port_type& pb_port_type,
|
|
t_mode* physical_mode) {
|
|
switch (pb_port_type) {
|
|
case CIRCUIT_PB_PORT_INPUT: {
|
|
for (int iport = 0; iport < des_pb_graph_node->num_input_ports; ++iport) {
|
|
for (int ipin = 0; ipin < des_pb_graph_node->num_input_pins[iport]; ++ipin) {
|
|
/* Get the selected edge of current pin*/
|
|
add_module_pb_graph_pin_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
&(des_pb_graph_node->input_pins[iport][ipin]),
|
|
physical_mode);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case CIRCUIT_PB_PORT_OUTPUT: {
|
|
for (int iport = 0; iport < des_pb_graph_node->num_output_ports; ++iport) {
|
|
for (int ipin = 0; ipin < des_pb_graph_node->num_output_pins[iport]; ++ipin) {
|
|
add_module_pb_graph_pin_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
&(des_pb_graph_node->output_pins[iport][ipin]),
|
|
physical_mode);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case CIRCUIT_PB_PORT_CLOCK: {
|
|
for (int iport = 0; iport < des_pb_graph_node->num_clock_ports; ++iport) {
|
|
for (int ipin = 0; ipin < des_pb_graph_node->num_clock_pins[iport]; ++ipin) {
|
|
add_module_pb_graph_pin_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
&(des_pb_graph_node->clock_pins[iport][ipin]),
|
|
physical_mode);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
VTR_LOGF_ERROR(__FILE__, __LINE__,
|
|
"Invalid pb port type!\n");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* TODO:
|
|
* Add modules and nets for programmable/non-programmable interconnections
|
|
* inside a module of pb_type
|
|
* This function will add the following elements to a module
|
|
* 1. Instances of direct connections
|
|
* 2. Instances of programmable routing multiplexers
|
|
* 3. nets to connect direct connections/multiplexer
|
|
*
|
|
* Pb_module
|
|
* +--------------------------------------------------------------+
|
|
* | |
|
|
* | +--------------+ +------------+ +--------------+ |
|
|
* |--->| |--->| |--->| |--->|
|
|
* |... | Multiplexers |... | |... | Multiplexers |... |
|
|
* |--->| |--->| |--->| |--->|
|
|
* | +--------------+ | Child | +--------------+ |
|
|
* | | Pb_modules | |
|
|
* | +--------------+ | | +--------------+ |
|
|
* |--->| |--->| |--->| |--->|
|
|
* | ...| Direct |... | |... | Direct |... |
|
|
* |--->| Connections |--->| |--->| Connections |--->|
|
|
* | +--------------+ +------------+ +--------------+ |
|
|
* | |
|
|
* +--------------------------------------------------------------+
|
|
*
|
|
* Note: this function should be run after ALL the child pb_modules
|
|
* have been added to the pb_module and ALL the ports defined
|
|
* in pb_type have been added to the pb_module!!!
|
|
*
|
|
********************************************************************/
|
|
static
|
|
void add_module_pb_graph_interc(ModuleManager& module_manager,
|
|
const ModuleId& pb_module,
|
|
std::vector<ModuleId>& memory_modules,
|
|
std::vector<size_t>& memory_instances,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
t_pb_graph_node* physical_pb_graph_node,
|
|
const int& physical_mode_index) {
|
|
/* Check cur_pb_graph_node*/
|
|
VTR_ASSERT(nullptr != physical_pb_graph_node);
|
|
|
|
/* Assign physical mode */
|
|
t_mode* physical_mode = &(physical_pb_graph_node->pb_type->modes[physical_mode_index]);
|
|
|
|
/* We check output_pins of cur_pb_graph_node and its the input_edges
|
|
* Built the interconnections between outputs of cur_pb_graph_node and outputs of child_pb_graph_node
|
|
* child_pb_graph_node.output_pins -----------------> cur_pb_graph_node.outpins
|
|
* /|\
|
|
* |
|
|
* input_pins, edges, output_pins
|
|
*/
|
|
add_module_pb_graph_port_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
physical_pb_graph_node,
|
|
CIRCUIT_PB_PORT_OUTPUT,
|
|
physical_mode);
|
|
|
|
/* We check input_pins of child_pb_graph_node and its the input_edges
|
|
* Built the interconnections between inputs of cur_pb_graph_node and inputs of child_pb_graph_node
|
|
* cur_pb_graph_node.input_pins -----------------> child_pb_graph_node.input_pins
|
|
* /|\
|
|
* |
|
|
* input_pins, edges, output_pins
|
|
*/
|
|
for (int child = 0; child < physical_pb_graph_node->pb_type->modes[physical_mode_index].num_pb_type_children; ++child) {
|
|
for (int inst = 0; inst < physical_pb_graph_node->pb_type->modes[physical_mode_index].pb_type_children[child].num_pb; ++inst) {
|
|
t_pb_graph_node* child_pb_graph_node = &(physical_pb_graph_node->child_pb_graph_nodes[physical_mode_index][child][inst]);
|
|
/* For each child_pb_graph_node input pins*/
|
|
add_module_pb_graph_port_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
child_pb_graph_node,
|
|
CIRCUIT_PB_PORT_INPUT,
|
|
physical_mode);
|
|
|
|
/* For each child_pb_graph_node clock pins*/
|
|
add_module_pb_graph_port_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib,
|
|
child_pb_graph_node,
|
|
CIRCUIT_PB_PORT_CLOCK,
|
|
physical_mode);
|
|
}
|
|
}
|
|
}
|
|
|
|
/********************************************************************
|
|
* Print Verilog modules of physical blocks inside a grid (CLB, I/O. etc.)
|
|
* This function will traverse the graph of complex logic block (t_pb_graph_node)
|
|
* in a recursive way, using a Depth First Search (DFS) algorithm.
|
|
* As such, primitive physical blocks (LUTs, FFs, etc.), leaf node of the pb_graph
|
|
* will be printed out first, while the top-level will be printed out in the last
|
|
*
|
|
* Note: this function will print a unique Verilog module for each type of
|
|
* t_pb_graph_node, i.e., t_pb_type, in the graph, in order to enable highly
|
|
* hierarchical Verilog organization as well as simplify the Verilog file sizes.
|
|
*
|
|
* Note: DFS is the right way. Do NOT use BFS.
|
|
* DFS can guarantee that all the sub-modules can be registered properly
|
|
* to its parent in module manager
|
|
*******************************************************************/
|
|
static
|
|
void rec_build_logical_tile_modules(ModuleManager& module_manager,
|
|
DecoderLibrary& decoder_lib,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
const MuxLibrary& mux_lib,
|
|
const e_config_protocol_type& sram_orgz_type,
|
|
const CircuitModelId& sram_model,
|
|
t_pb_graph_node* physical_pb_graph_node,
|
|
const bool& verbose) {
|
|
/* Check cur_pb_graph_node*/
|
|
VTR_ASSERT(nullptr != physical_pb_graph_node);
|
|
|
|
/* Get the pb_type definition related to the node */
|
|
t_pb_type* physical_pb_type = physical_pb_graph_node->pb_type;
|
|
|
|
/* Find the mode that physical implementation of a pb_type */
|
|
t_mode* physical_mode = device_annotation.physical_mode(physical_pb_type);
|
|
|
|
/* For non-leaf node in the pb_type graph:
|
|
* Recursively Depth-First Generate all the child pb_type at the level
|
|
*/
|
|
if (false == is_primitive_pb_type(physical_pb_type)) {
|
|
for (int ipb = 0; ipb < physical_mode->num_pb_type_children; ++ipb) {
|
|
/* Go recursive to visit the children */
|
|
rec_build_logical_tile_modules(module_manager, decoder_lib,
|
|
device_annotation,
|
|
circuit_lib, mux_lib,
|
|
sram_orgz_type, sram_model,
|
|
&(physical_pb_graph_node->child_pb_graph_nodes[physical_mode->index][ipb][0]),
|
|
verbose);
|
|
}
|
|
}
|
|
|
|
/* For leaf node, a primitive Verilog module will be generated */
|
|
if (true == is_primitive_pb_type(physical_pb_type)) {
|
|
build_primitive_block_module(module_manager, decoder_lib,
|
|
device_annotation,
|
|
circuit_lib,
|
|
sram_orgz_type, sram_model,
|
|
physical_pb_graph_node,
|
|
verbose);
|
|
/* Finish for primitive node, return */
|
|
return;
|
|
}
|
|
|
|
/* Generate the name of the Verilog module for this pb_type */
|
|
std::string pb_module_name = generate_physical_block_module_name(physical_pb_type);
|
|
|
|
VTR_LOGV(verbose,
|
|
"Building module '%s'...",
|
|
pb_module_name.c_str());
|
|
|
|
/* Register the Verilog module in module manager */
|
|
ModuleId pb_module = module_manager.add_module(pb_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(pb_module));
|
|
|
|
/* Label module usage */
|
|
module_manager.set_module_usage(pb_module, ModuleManager::MODULE_GRID);
|
|
|
|
/* Add ports to the Verilog module */
|
|
add_pb_type_ports_to_module_manager(module_manager, pb_module, physical_pb_type);
|
|
|
|
/* Vectors to record all the memory modules have been added
|
|
* They are used to add module nets of configuration bus
|
|
*/
|
|
std::vector<ModuleId> memory_modules;
|
|
std::vector<size_t> memory_instances;
|
|
|
|
/* Add all the child Verilog modules as instances */
|
|
for (int ichild = 0; ichild < physical_mode->num_pb_type_children; ++ichild) {
|
|
/* Get the name and module id for this child pb_type */
|
|
std::string child_pb_module_name = generate_physical_block_module_name(&(physical_mode->pb_type_children[ichild]));
|
|
ModuleId child_pb_module = module_manager.find_module(child_pb_module_name);
|
|
/* We must have one valid id! */
|
|
VTR_ASSERT(true == module_manager.valid_module_id(child_pb_module));
|
|
|
|
/* Each child may exist multiple times in the hierarchy*/
|
|
for (int inst = 0; inst < physical_mode->pb_type_children[ichild].num_pb; ++inst) {
|
|
size_t child_instance_id = module_manager.num_instance(pb_module, child_pb_module);
|
|
/* Ensure the instance of this child module is the same as placement index,
|
|
* This check is necessary because placement_index is used to identify instance id for children
|
|
* when adding local interconnection for this pb_type
|
|
*/
|
|
VTR_ASSERT(child_instance_id == (size_t)physical_pb_graph_node->child_pb_graph_nodes[physical_mode->index][ichild][inst].placement_index);
|
|
|
|
/* Add the memory module as a child of primitive module */
|
|
module_manager.add_child_module(pb_module, child_pb_module);
|
|
|
|
/* Set an instance name to bind to a block in bitstream generation and SDC generation! */
|
|
std::string child_pb_instance_name = generate_physical_block_instance_name(&(physical_pb_type->modes[physical_mode->index].pb_type_children[ichild]), inst);
|
|
module_manager.set_child_instance_name(pb_module, child_pb_module, child_instance_id, child_pb_instance_name);
|
|
|
|
/* Identify if this sub module includes configuration bits,
|
|
* we will update the memory module and instance list
|
|
*/
|
|
if (0 < find_module_num_config_bits(module_manager, child_pb_module,
|
|
circuit_lib, sram_model,
|
|
sram_orgz_type)) {
|
|
module_manager.add_configurable_child(pb_module, child_pb_module, child_instance_id);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add modules and nets for programmable/non-programmable interconnections
|
|
* inside the Verilog module
|
|
*/
|
|
add_module_pb_graph_interc(module_manager, pb_module,
|
|
memory_modules, memory_instances,
|
|
device_annotation,
|
|
circuit_lib, physical_pb_graph_node,
|
|
physical_mode->index);
|
|
|
|
/* Add global ports to the pb_module:
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the global ports from the child modules and build a list of it
|
|
*/
|
|
add_module_global_ports_from_child_modules(module_manager, pb_module);
|
|
|
|
/* Count GPIO ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
add_module_gpio_ports_from_child_modules(module_manager, pb_module);
|
|
|
|
/* Count shared SRAM ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
size_t module_num_shared_config_bits = find_module_num_shared_config_bits_from_child_modules(module_manager, pb_module);
|
|
if (0 < module_num_shared_config_bits) {
|
|
add_reserved_sram_ports_to_module_manager(module_manager, pb_module, module_num_shared_config_bits);
|
|
}
|
|
|
|
/* Count SRAM ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
size_t module_num_config_bits = find_module_num_config_bits_from_child_modules(module_manager, pb_module, circuit_lib, sram_model, sram_orgz_type);
|
|
if (0 < module_num_config_bits) {
|
|
add_sram_ports_to_module_manager(module_manager, pb_module, circuit_lib, sram_model, sram_orgz_type, module_num_config_bits);
|
|
}
|
|
|
|
/* Add module nets to connect memory cells inside
|
|
* This is a one-shot addition that covers all the memory modules in this pb module!
|
|
*/
|
|
if (0 < module_manager.configurable_children(pb_module).size()) {
|
|
add_module_nets_memory_config_bus(module_manager, decoder_lib, pb_module,
|
|
sram_orgz_type, circuit_lib.design_tech_type(sram_model));
|
|
}
|
|
|
|
VTR_LOGV(verbose, "Done\n");
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* This function will create a Verilog file and print out a Verilog netlist
|
|
* for a type of physical block
|
|
*
|
|
* For IO blocks:
|
|
* The param 'border_side' is required, which is specify which side of fabric
|
|
* the I/O block locates at.
|
|
*****************************************************************************/
|
|
static
|
|
void build_physical_tile_module(ModuleManager& module_manager,
|
|
DecoderLibrary& decoder_lib,
|
|
const VprDeviceAnnotation& vpr_device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
const e_config_protocol_type& sram_orgz_type,
|
|
const CircuitModelId& sram_model,
|
|
t_physical_tile_type_ptr phy_block_type,
|
|
const e_side& border_side,
|
|
const bool& duplicate_grid_pin,
|
|
const bool& verbose) {
|
|
/* Create a Module for the top-level physical block, and add to module manager */
|
|
std::string grid_module_name = generate_grid_block_module_name(std::string(GRID_MODULE_NAME_PREFIX),
|
|
std::string(phy_block_type->name),
|
|
is_io_type(phy_block_type),
|
|
border_side);
|
|
VTR_LOGV(verbose,
|
|
"Building physical tile '%s'...",
|
|
grid_module_name.c_str());
|
|
|
|
ModuleId grid_module = module_manager.add_module(grid_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(grid_module));
|
|
|
|
/* Now each physical tile may have a number of logical blocks
|
|
* OpenFPGA only considers the physical implementation of the tiles.
|
|
* So, we do not allow multiple equivalent sites to be defined
|
|
* under a physical tile type.
|
|
* If you need different equivalent sites, you can always define
|
|
* it as a mode under a <pb_type>
|
|
*/
|
|
for (int iz = 0; iz < phy_block_type->capacity; ++iz) {
|
|
VTR_ASSERT(1 == phy_block_type->equivalent_sites.size());
|
|
for (t_logical_block_type_ptr lb_type : phy_block_type->equivalent_sites) {
|
|
/* Bypass empty pb_graph */
|
|
if (nullptr == lb_type->pb_graph_head) {
|
|
continue;
|
|
}
|
|
std::string pb_module_name = generate_physical_block_module_name(lb_type->pb_graph_head->pb_type);
|
|
ModuleId pb_module = module_manager.find_module(pb_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(pb_module));
|
|
|
|
/* Add all the sub modules */
|
|
size_t pb_instance_id = module_manager.num_instance(grid_module, pb_module);
|
|
module_manager.add_child_module(grid_module, pb_module);
|
|
|
|
/* Give the child module with a unique instance name */
|
|
std::string instance_name = generate_physical_block_instance_name(lb_type->pb_graph_head->pb_type, iz);
|
|
/* Set an instance name to bind to a block in bitstream generation */
|
|
module_manager.set_child_instance_name(grid_module, pb_module, pb_instance_id, instance_name);
|
|
|
|
/* Identify if this sub module includes configuration bits,
|
|
* we will update the memory module and instance list
|
|
*/
|
|
if (0 < find_module_num_config_bits(module_manager, pb_module,
|
|
circuit_lib, sram_model,
|
|
sram_orgz_type)) {
|
|
module_manager.add_configurable_child(grid_module, pb_module, pb_instance_id);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add grid ports(pins) to the module */
|
|
if (false == duplicate_grid_pin) {
|
|
/* Default way to add these ports by following the definition in pb_types */
|
|
add_grid_module_pb_type_ports(module_manager, grid_module,
|
|
vpr_device_annotation,
|
|
phy_block_type, border_side);
|
|
/* Add module nets to connect the pb_type ports to sub modules */
|
|
for (t_logical_block_type_ptr lb_type : phy_block_type->equivalent_sites) {
|
|
/* Bypass empty pb_graph */
|
|
if (nullptr == lb_type->pb_graph_head) {
|
|
continue;
|
|
}
|
|
std::string pb_module_name = generate_physical_block_module_name(lb_type->pb_graph_head->pb_type);
|
|
ModuleId pb_module = module_manager.find_module(pb_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(pb_module));
|
|
for (const size_t& child_instance : module_manager.child_module_instances(grid_module, pb_module)) {
|
|
add_grid_module_nets_connect_pb_type_ports(module_manager, grid_module,
|
|
pb_module, child_instance,
|
|
vpr_device_annotation,
|
|
phy_block_type, border_side);
|
|
}
|
|
}
|
|
} else {
|
|
VTR_ASSERT_SAFE(true == duplicate_grid_pin);
|
|
/* Add these ports with duplication */
|
|
add_grid_module_duplicated_pb_type_ports(module_manager, grid_module,
|
|
vpr_device_annotation,
|
|
phy_block_type, border_side);
|
|
|
|
/* Add module nets to connect the duplicated pb_type ports to sub modules */
|
|
for (t_logical_block_type_ptr lb_type : phy_block_type->equivalent_sites) {
|
|
/* Bypass empty pb_graph */
|
|
if (nullptr == lb_type->pb_graph_head) {
|
|
continue;
|
|
}
|
|
std::string pb_module_name = generate_physical_block_module_name(lb_type->pb_graph_head->pb_type);
|
|
ModuleId pb_module = module_manager.find_module(pb_module_name);
|
|
VTR_ASSERT(true == module_manager.valid_module_id(pb_module));
|
|
for (const size_t& child_instance : module_manager.child_module_instances(grid_module, pb_module)) {
|
|
add_grid_module_nets_connect_duplicated_pb_type_ports(module_manager, grid_module,
|
|
pb_module, child_instance,
|
|
vpr_device_annotation,
|
|
phy_block_type, border_side);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add global ports to the pb_module:
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the global ports from the child modules and build a list of it
|
|
*/
|
|
add_module_global_ports_from_child_modules(module_manager, grid_module);
|
|
|
|
/* Count GPIO ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
add_module_gpio_ports_from_child_modules(module_manager, grid_module);
|
|
|
|
/* Count shared SRAM ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
size_t module_num_shared_config_bits = find_module_num_shared_config_bits_from_child_modules(module_manager, grid_module);
|
|
if (0 < module_num_shared_config_bits) {
|
|
add_reserved_sram_ports_to_module_manager(module_manager, grid_module, module_num_shared_config_bits);
|
|
}
|
|
|
|
/* Count SRAM ports from the sub-modules under this Verilog module
|
|
* This is a much easier job after adding sub modules (instances),
|
|
* we just need to find all the I/O ports from the child modules and build a list of it
|
|
*/
|
|
size_t module_num_config_bits = find_module_num_config_bits_from_child_modules(module_manager, grid_module, circuit_lib, sram_model, sram_orgz_type);
|
|
if (0 < module_num_config_bits) {
|
|
add_pb_sram_ports_to_module_manager(module_manager, grid_module, circuit_lib, sram_model, sram_orgz_type, module_num_config_bits);
|
|
}
|
|
|
|
/* Add module nets to connect memory cells inside
|
|
* This is a one-shot addition that covers all the memory modules in this pb module!
|
|
*/
|
|
if (0 < module_manager.configurable_children(grid_module).size()) {
|
|
add_pb_module_nets_memory_config_bus(module_manager, decoder_lib, grid_module,
|
|
sram_orgz_type, circuit_lib.design_tech_type(sram_model));
|
|
}
|
|
|
|
VTR_LOGV(verbose, "Done\n");
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Create logic block modules in a compact way
|
|
* This function will achieve this goal in two step:
|
|
* - Build the modules for each logical tile which is based on pb_graph
|
|
* Note that there the pin/port does not carry any fixed physical location
|
|
* - Build the modules for each physical tile which is based on physical_tile_type_ptr
|
|
* Here, multiple logical tiles can be considered and each port/pin has a fixed
|
|
* physical location. This is where the feature of duplicate_pin_pin will be applied
|
|
* - Only one module for each I/O on each border side (IO_TYPE)
|
|
* - Only one module for each CLB (FILL_TYPE)
|
|
* - Only one module for each heterogeneous block
|
|
****************************************************************************/
|
|
void build_grid_modules(ModuleManager& module_manager,
|
|
DecoderLibrary& decoder_lib,
|
|
const DeviceContext& device_ctx,
|
|
const VprDeviceAnnotation& device_annotation,
|
|
const CircuitLibrary& circuit_lib,
|
|
const MuxLibrary& mux_lib,
|
|
const e_config_protocol_type& sram_orgz_type,
|
|
const CircuitModelId& sram_model,
|
|
const bool& duplicate_grid_pin,
|
|
const bool& verbose) {
|
|
/* Start time count */
|
|
vtr::ScopedStartFinishTimer timer("Build grid modules");
|
|
|
|
/* Enumerate the types of logical tiles, and build a module for each
|
|
* Build modules for all the pb_types/pb_graph_nodes
|
|
* use a Depth-First Search Algorithm to print the sub-modules
|
|
* Note: DFS is the right way. Do NOT use BFS.
|
|
* DFS can guarantee that all the sub-modules can be registered properly
|
|
* to its parent in module manager
|
|
*/
|
|
/* Build modules starting from the top-level pb_type/pb_graph_node, and traverse the graph in a recursive way */
|
|
VTR_LOG("Building logical tiles...");
|
|
VTR_LOGV(verbose, "\n");
|
|
for (const t_logical_block_type& logical_tile : device_ctx.logical_block_types) {
|
|
/* Bypass empty pb_graph */
|
|
if (nullptr == logical_tile.pb_graph_head) {
|
|
continue;
|
|
}
|
|
rec_build_logical_tile_modules(module_manager, decoder_lib,
|
|
device_annotation,
|
|
circuit_lib, mux_lib,
|
|
sram_orgz_type, sram_model,
|
|
logical_tile.pb_graph_head,
|
|
verbose);
|
|
}
|
|
VTR_LOG("Done\n");
|
|
|
|
/* Enumerate the types of physical tiles
|
|
* Use the logical tile module to build the physical tiles
|
|
*/
|
|
VTR_LOG("Building physical tiles...");
|
|
VTR_LOGV(verbose, "\n");
|
|
for (const t_physical_tile_type& physical_tile : device_ctx.physical_tile_types) {
|
|
/* Bypass empty type or nullptr */
|
|
if (true == is_empty_type(&physical_tile)) {
|
|
continue;
|
|
} else if (true == is_io_type(&physical_tile)) {
|
|
/* Special for I/O block:
|
|
* We will search the grids and see where the I/O blocks are located:
|
|
* - If a I/O block locates on border sides of FPGA fabric:
|
|
* i.e., one or more from {TOP, RIGHT, BOTTOM, LEFT},
|
|
* we will generate one module for each border side
|
|
* - If a I/O block locates in the center of FPGA fabric:
|
|
* we will generate one module with NUM_SIDES (same treatment as regular grids)
|
|
*/
|
|
std::set<e_side> io_type_sides = find_physical_io_tile_located_sides(device_ctx.grid,
|
|
&physical_tile);
|
|
for (const e_side& io_type_side : io_type_sides) {
|
|
build_physical_tile_module(module_manager, decoder_lib,
|
|
device_annotation,
|
|
circuit_lib,
|
|
sram_orgz_type, sram_model,
|
|
&physical_tile,
|
|
io_type_side,
|
|
duplicate_grid_pin,
|
|
verbose);
|
|
}
|
|
} else {
|
|
/* For CLB and heterogenenous blocks */
|
|
build_physical_tile_module(module_manager, decoder_lib,
|
|
device_annotation,
|
|
circuit_lib,
|
|
sram_orgz_type, sram_model,
|
|
&physical_tile,
|
|
NUM_SIDES,
|
|
duplicate_grid_pin,
|
|
verbose);
|
|
}
|
|
}
|
|
VTR_LOG("Done\n");
|
|
}
|
|
|
|
} /* end namespace openfpga */
|