42 lines
2.3 KiB
Markdown
42 lines
2.3 KiB
Markdown
# Getting Started with OpenFPGA <img src="./docs/source/figures/OpenFPGA_logo.png" width="200" align="right">
|
|
[](https://travis-ci.org/LNIS-Projects/OpenFPGA)
|
|
[](https://openfpga.readthedocs.io/en/master/?badge=master)
|
|
|
|
## Introduction
|
|
The OpenFPGA framework is the **first open-source FPGA IP generator** supporting highly-customizable homogeneous FPGA architectures. OpenFPGA provides a full set of EDA support for customized FPGAs, including Verilog-to-bitstream generation and self-testing verification. OpenFPGA opens the door to democratizing FPGA technology and EDA techniques, with agile prototyping approaches and constantly evolving EDA tools for chip designers and researchers.
|
|
|
|
## Compilation
|
|
Dependencies and help using docker can be found [**here**](./docs/source/tutorials/compile.rst).
|
|
|
|
**Compilation Steps:**
|
|
```bash
|
|
# Clone the repository and go inside it
|
|
git clone https://github.com/LNIS-Projects/OpenFPGA.git && cd OpenFPGA
|
|
mkdir build && cd build # Create a folder named build in the OpenPFGA repository
|
|
cmake .. -DCMAKE_BUILD_TYPE=debug # Create a Makefile in this folder using cmake
|
|
make # Compile the tool and its dependencies
|
|
```
|
|
*cmake3.12 is recommended to compile OpenFPGA with GUI*
|
|
|
|
**Quick Compilation Verification**
|
|
To quickly verify the tool is well compiled, user can run the following command from OpenFPGA root repository.
|
|
```bash
|
|
python3 openfpga_flow/scripts/run_fpga_task.py compilation_verification --debug --show_thread_logs
|
|
```
|
|
|
|
*Python3 and iVerilog v10.1+ are required. GUI will pop-up if enabled during compilation.*
|
|
|
|
|
|
**Supported Operating Systems**
|
|
We currently target OpenFPGA for:
|
|
1. Ubuntu 18.04
|
|
2. Red Hat 7.5
|
|
|
|
*The tool was tested with these operating systems. It might work with earlier versions and other distributions.*
|
|
|
|
## Documentation
|
|
OpenFPGA's [full documentation](https://openfpga.readthedocs.io/en/master/) includes tutorials, descriptions of the design flow, and tool options.
|
|
|
|
## Tutorials
|
|
You can find some tutorials in the [**./tutorials**](./docs/source/tutorials/) folder. This will help you get more familiar with the tool and use OpenFPGA under different configurations.
|