add more test cases about LUT design and deploy to CI
This commit is contained in:
tangxifan
parent
1d35ac8086
commit
889bc8dbe8
|
|
@ -51,11 +51,14 @@ echo -e "Testing OpenFPGA Shell";
|
||||||
echo -e "Testing configuration chain of a K4N4 FPGA";
|
echo -e "Testing configuration chain of a K4N4 FPGA";
|
||||||
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/configuration_chain --debug --show_thread_logs
|
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/configuration_chain --debug --show_thread_logs
|
||||||
|
|
||||||
echo -e "Testing Verilog generation for a single mode LUT6 FPGA using micro benchmarks";
|
echo -e "Testing Verilog generation for LUTs: a single mode LUT6 FPGA using micro benchmarks";
|
||||||
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/single_mode --debug --show_thread_logs
|
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/lut_design/single_mode --debug --show_thread_logs
|
||||||
|
|
||||||
echo -e "Testing Verilog generation with simple fracturable LUT6 ";
|
echo -e "Testing Verilog generation for LUTs: simple fracturable LUT6 ";
|
||||||
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/frac_lut --debug --show_thread_logs
|
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/lut_design/frac_lut --debug --show_thread_logs
|
||||||
|
|
||||||
|
echo -e "Testing Verilog generation for LUTs: LUT6 with intermediate buffers";
|
||||||
|
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/lut_design/intermediate_buffer --debug --show_thread_logs
|
||||||
|
|
||||||
echo -e "Testing Verilog generation with VPR's untileable routing architecture ";
|
echo -e "Testing Verilog generation with VPR's untileable routing architecture ";
|
||||||
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/untileable --debug --show_thread_logs
|
python3 openfpga_flow/scripts/run_fpga_task.py openfpga_shell/untileable --debug --show_thread_logs
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,229 @@
|
||||||
|
<!-- Architecture annotation for OpenFPGA framework
|
||||||
|
This annotation supports the k6_N10_40nm.xml
|
||||||
|
- General purpose logic block
|
||||||
|
- K = 6, N = 10, I = 40
|
||||||
|
- Single mode
|
||||||
|
- Routing architecture
|
||||||
|
- L = 4, fc_in = 0.15, fc_out = 0.1
|
||||||
|
-->
|
||||||
|
<openfpga_architecture>
|
||||||
|
<technology_library>
|
||||||
|
<device_library>
|
||||||
|
<device_model name="logic" type="transistor">
|
||||||
|
<lib type="industry" corner="TOP_TT" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
|
||||||
|
<design vdd="0.9" pn_ratio="2"/>
|
||||||
|
<pmos name="pch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
|
||||||
|
<nmos name="nch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
|
||||||
|
</device_model>
|
||||||
|
<device_model name="io" type="transistor">
|
||||||
|
<lib type="academia" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
|
||||||
|
<design vdd="2.5" pn_ratio="3"/>
|
||||||
|
<pmos name="pch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
|
||||||
|
<nmos name="nch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
|
||||||
|
</device_model>
|
||||||
|
</device_library>
|
||||||
|
<variation_library>
|
||||||
|
<variation name="logic_transistor_var" abs_deviation="0.1" num_sigma="3"/>
|
||||||
|
<variation name="io_transistor_var" abs_deviation="0.1" num_sigma="3"/>
|
||||||
|
</variation_library>
|
||||||
|
</technology_library>
|
||||||
|
<circuit_library>
|
||||||
|
<circuit_model type="inv_buf" name="INVTX1" prefix="INVTX1" is_default="true">
|
||||||
|
<design_technology type="cmos" topology="inverter" size="1"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="inv_buf" name="buf4" prefix="buf4" is_default="false">
|
||||||
|
<design_technology type="cmos" topology="buffer" size="1" num_level="2" f_per_stage="4"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="inv_buf" name="tap_buf4" prefix="tap_buf4" is_default="false">
|
||||||
|
<design_technology type="cmos" topology="buffer" size="1" num_level="3" f_per_stage="4"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="pass_gate" name="TGATE" prefix="TGATE" is_default="true">
|
||||||
|
<design_technology type="cmos" topology="transmission_gate" nmos_size="1" pmos_size="2"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="input" prefix="sel" size="1"/>
|
||||||
|
<port type="input" prefix="selb" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in sel selb" out_port="out">
|
||||||
|
10e-12 5e-12 5e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in sel selb" out_port="out">
|
||||||
|
10e-12 5e-12 5e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="chan_wire" name="chan_segment" prefix="track_seg" is_default="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<wire_param model_type="pi" R="101" C="22.5e-15" num_level="1"/> <!-- model_type could be T, res_val and cap_val DON'T CARE -->
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="wire" name="direct_interc" prefix="direct_interc" is_default="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<wire_param model_type="pi" R="0" C="0" num_level="1"/> <!-- model_type could be T, res_val cap_val should be defined -->
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="mux" name="mux_2level" prefix="mux_2level" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos" structure="multi_level" num_level="2" add_const_input="true" const_input_val="1"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="mux" name="mux_2level_tapbuf" prefix="mux_2level_tapbuf" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos" structure="multi_level" num_level="2" add_const_input="true" const_input_val="1"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="tap_buf4"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="mux" name="mux_1level_tapbuf" prefix="mux_1level_tapbuf" is_default="true" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos" structure="one_level" add_const_input="true" const_input_val="1"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="tap_buf4"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
<!--DFF subckt ports should be defined as <D> <Q> <CLK> <RESET> <SET> -->
|
||||||
|
<circuit_model type="ff" name="static_dff" prefix="dff" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/SpiceNetlists/ff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/VerilogNetlists/ff.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="input" prefix="D" size="1"/>
|
||||||
|
<port type="input" prefix="set" size="1" is_global="true" default_val="0" is_set="true"/>
|
||||||
|
<port type="input" prefix="reset" size="1" is_global="true" default_val="0" is_reset="true"/>
|
||||||
|
<port type="output" prefix="Q" size="1"/>
|
||||||
|
<port type="clock" prefix="clk" size="1" is_global="true" default_val="0" />
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="lut" name="lut6" prefix="lut6" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<lut_input_inverter exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<lut_input_buffer exist="true" circuit_model_name="buf4"/>
|
||||||
|
<lut_intermediate_buffer exist="true" circuit_model_name="buf4" location_map="--1--"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="6"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="64"/>
|
||||||
|
</circuit_model>
|
||||||
|
<!--Scan-chain DFF subckt ports should be defined as <D> <Q> <Qb> <CLK> <RESET> <SET> -->
|
||||||
|
<circuit_model type="ccff" name="sc_dff_compact" prefix="scff" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/SpiceNetlists/ff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/VerilogNetlists/ff.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="input" prefix="pReset" lib_name="reset" size="1" is_global="true" default_val="0" is_reset="true" is_prog="true"/>
|
||||||
|
<port type="input" prefix="D" size="1"/>
|
||||||
|
<port type="output" prefix="Q" size="1"/>
|
||||||
|
<port type="output" prefix="Qb" size="1"/>
|
||||||
|
<port type="clock" prefix="prog_clk" lib_name="clk" size="1" is_global="true" default_val="0" is_prog="true"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="iopad" name="iopad" prefix="iopad" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/SpiceNetlists/io.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/VerilogNetlists/io.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="inout" prefix="pad" size="1" is_global="true" is_io="true"/>
|
||||||
|
<port type="sram" prefix="en" size="1" mode_select="true" circuit_model_name="sc_dff_compact" default_val="1"/>
|
||||||
|
<port type="input" prefix="outpad" size="1"/>
|
||||||
|
<port type="output" prefix="inpad" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
</circuit_library>
|
||||||
|
<configuration_protocol>
|
||||||
|
<organization type="scan_chain" circuit_model_name="sc_dff_compact"/>
|
||||||
|
</configuration_protocol>
|
||||||
|
<connection_block>
|
||||||
|
<switch name="ipin_cblock" circuit_model_name="mux_2level_tapbuf"/>
|
||||||
|
</connection_block>
|
||||||
|
<switch_block>
|
||||||
|
<switch name="0" circuit_model_name="mux_2level_tapbuf"/>
|
||||||
|
</switch_block>
|
||||||
|
<routing_segment>
|
||||||
|
<segment name="L4" circuit_model_name="chan_segment"/>
|
||||||
|
</routing_segment>
|
||||||
|
<pb_type_annotations>
|
||||||
|
<!-- physical pb_type binding in complex block IO -->
|
||||||
|
<pb_type name="io" physical_mode_name="physical" idle_mode_name="inpad"/>
|
||||||
|
<pb_type name="io[physical].iopad" circuit_model_name="iopad" mode_bits="1"/>
|
||||||
|
<pb_type name="io[inpad].inpad" physical_pb_type_name="io[physical].iopad" mode_bits="1"/>
|
||||||
|
<pb_type name="io[outpad].outpad" physical_pb_type_name="io[physical].iopad" mode_bits="0"/>
|
||||||
|
<!-- End physical pb_type binding in complex block IO -->
|
||||||
|
|
||||||
|
<!-- physical pb_type binding in complex block CLB -->
|
||||||
|
<!-- physical mode will be the default mode if not specified -->
|
||||||
|
<pb_type name="clb">
|
||||||
|
<!-- Binding interconnect to circuit models as their physical implementation, if not defined, we use the default model -->
|
||||||
|
<interconnect name="crossbar" circuit_model_name="mux_2level"/>
|
||||||
|
</pb_type>
|
||||||
|
<pb_type name="clb.fle[n1_lut6].ble6.lut6" circuit_model_name="lut6"/>
|
||||||
|
<pb_type name="clb.fle[n1_lut6].ble6.ff" circuit_model_name="static_dff"/>
|
||||||
|
<!-- End physical pb_type binding in complex block IO -->
|
||||||
|
</pb_type_annotations>
|
||||||
|
</openfpga_architecture>
|
||||||
|
<openfpga_simulation_setting>
|
||||||
|
<clock_setting>
|
||||||
|
<operating frequency="200e6" num_cycles="auto" slack="0.2"/>
|
||||||
|
<programming frequency="10e6"/>
|
||||||
|
</clock_setting>
|
||||||
|
<simulator_option>
|
||||||
|
<operating_condition temperature="25"/>
|
||||||
|
<output_log verbose="false" captab="false"/>
|
||||||
|
<accuracy type="abs" value="1e-13"/>
|
||||||
|
<runtime fast_simulation="true"/>
|
||||||
|
</simulator_option>
|
||||||
|
<monte_carlo num_simulation_points="2"/>
|
||||||
|
<measurement_setting>
|
||||||
|
<slew>
|
||||||
|
<rise upper_thres_pct="0.95" lower_thres_pct="0.05"/>
|
||||||
|
<fall upper_thres_pct="0.05" lower_thres_pct="0.95"/>
|
||||||
|
</slew>
|
||||||
|
<delay>
|
||||||
|
<rise input_thres_pct="0.5" output_thres_pct="0.5"/>
|
||||||
|
<fall input_thres_pct="0.5" output_thres_pct="0.5"/>
|
||||||
|
</delay>
|
||||||
|
</measurement_setting>
|
||||||
|
<stimulus>
|
||||||
|
<clock>
|
||||||
|
<rise slew_type="abs" slew_time="20e-12" />
|
||||||
|
<fall slew_type="abs" slew_time="20e-12" />
|
||||||
|
</clock>
|
||||||
|
<input>
|
||||||
|
<rise slew_type="abs" slew_time="25e-12" />
|
||||||
|
<fall slew_type="abs" slew_time="25e-12" />
|
||||||
|
</input>
|
||||||
|
</stimulus>
|
||||||
|
</openfpga_simulation_setting>
|
||||||
|
|
@ -0,0 +1,45 @@
|
||||||
|
# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
||||||
|
# Configuration file for running experiments
|
||||||
|
# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
||||||
|
# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
|
||||||
|
# Each job execute fpga_flow script on combination of architecture & benchmark
|
||||||
|
# timeout_each_job is timeout for each job
|
||||||
|
# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
||||||
|
|
||||||
|
[GENERAL]
|
||||||
|
run_engine=openfpga_shell
|
||||||
|
openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/OpenFPGAShellScripts/example_script.openfpga
|
||||||
|
power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
|
||||||
|
power_analysis = true
|
||||||
|
spice_output=false
|
||||||
|
verilog_output=true
|
||||||
|
timeout_each_job = 20*60
|
||||||
|
fpga_flow=vpr_blif
|
||||||
|
openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k6_N10_intermediate_buffer_40nm_openfpga.xml
|
||||||
|
|
||||||
|
[ARCHITECTURES]
|
||||||
|
arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/arch/vpr_only_templates/k6_N10_tileable_40nm.xml
|
||||||
|
|
||||||
|
[BENCHMARKS]
|
||||||
|
#
|
||||||
|
bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.blif
|
||||||
|
bench1=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/routing_test/routing_test.blif
|
||||||
|
# Modelsim is ok with this but icarus fails due to poor support on timing and looping
|
||||||
|
#bench2=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2_latch/and2_latch.blif
|
||||||
|
|
||||||
|
[SYNTHESIS_PARAM]
|
||||||
|
bench0_top = and2
|
||||||
|
bench0_act = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.act
|
||||||
|
bench0_verilog = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.v
|
||||||
|
|
||||||
|
bench1_top = routing_test
|
||||||
|
bench1_act = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/routing_test/routing_test.act
|
||||||
|
bench1_verilog = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/routing_test/routing_test.v
|
||||||
|
|
||||||
|
bench2_top = and2_latch
|
||||||
|
bench2_act = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2_latch/and2_latch.act
|
||||||
|
bench2_verilog = ${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2_latch/and2_latch.v
|
||||||
|
|
||||||
|
[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
|
||||||
|
end_flow_with_test=
|
||||||
|
vpr_fpga_verilog_formal_verification_top_netlist=
|
||||||
Loading…
Reference in New Issue