[test] add a new test to validate module renaming using index

openfpga_flow/openfpga_shell_scripts/module_rename_full_testbench_example_script.openfpga

@@ -0,0 +1,74 @@
+# Run VPR for the 'and' design
+#--write_rr_graph example_rr_graph.xml
+vpr ${VPR_ARCH_FILE} ${VPR_TESTBENCH_BLIF} --device ${OPENFPGA_VPR_DEVICE} --route_chan_width ${OPENFPGA_VPR_ROUTE_CHAN_WIDTH} --clock_modeling ideal
+
+# Read OpenFPGA architecture definition
+read_openfpga_arch -f ${OPENFPGA_ARCH_FILE}
+
+# Read OpenFPGA simulation settings
+read_openfpga_simulation_setting -f ${OPENFPGA_SIM_SETTING_FILE}
+
+# Annotate the OpenFPGA architecture to VPR data base
+# to debug use --verbose options
+link_openfpga_arch --sort_gsb_chan_node_in_edges
+
+# Check and correct any naming conflicts in the BLIF netlist
+check_netlist_naming_conflict --fix --report ./netlist_renaming.xml
+
+# Apply fix-up to Look-Up Table truth tables based on packing results
+lut_truth_table_fixup
+
+# Build the module graph
+#  - Enabled compression on routing architecture modules
+#  - Enable pin duplication on grid modules
+build_fabric --compress_routing --group_config_block ${OPENFPGA_GROUP_TILE_CONFIG_OPTION} ${OPENFPGA_FABRIC_MODULE_NAME_OPTIONS} #--verbose
+# Add a fpga core between fpga top and the underlying modules
+${OPENFPGA_ADD_FPGA_CORE_MODULE}
+
+# Write the fabric hierarchy of module graph to a file
+# This is used by hierarchical PnR flows
+write_fabric_hierarchy --file ./fabric_hierarchy.txt
+
+# Repack the netlist to physical pbs
+# This must be done before bitstream generator and testbench generation
+# Strongly recommend it is done after all the fix-up have been applied
+repack #--verbose
+
+# Build the bitstream
+#  - Output the fabric-independent bitstream to a file
+build_architecture_bitstream --verbose --write_file fabric_independent_bitstream.xml
+
+# Build fabric-dependent bitstream
+build_fabric_bitstream --verbose
+
+# Write fabric-dependent bitstream
+write_fabric_bitstream --file fabric_bitstream.bit --format plain_text
+
+# Write the Verilog netlist for FPGA fabric
+#  - Enable the use of explicit port mapping in Verilog netlist
+write_fabric_verilog --file ./SRC --explicit_port_mapping --include_timing --print_user_defined_template --verbose
+
+# Write the Verilog testbench for FPGA fabric
+#  - We suggest the use of same output directory as fabric Verilog netlists
+#  - Must specify the reference benchmark file if you want to output any testbenches
+#  - Enable top-level testbench which is a full verification including programming circuit and core logic of FPGA
+#  - Enable pre-configured top-level testbench which is a fast verification skipping programming phase
+#  - Simulation ini file is optional and is needed only when you need to interface different HDL simulators using openfpga flow-run scripts
+write_full_testbench --file ./SRC --reference_benchmark_file_path ${REFERENCE_VERILOG_TESTBENCH} --explicit_port_mapping --include_signal_init --bitstream fabric_bitstream.bit
+
+# Write the SDC files for PnR backend
+#  - Turn on every options here
+# FIXME: Not supported yet. 
+#write_pnr_sdc --file ./SDC
+
+# Write SDC to disable timing for configure ports
+#write_sdc_disable_timing_configure_ports --file ./SDC/disable_configure_ports.sdc
+
+# Write the SDC to run timing analysis for a mapped FPGA fabric
+#write_analysis_sdc --file ./SDC_analysis
+
+# Finish and exit OpenFPGA
+exit
+
+# Note :
+# To run verification at the end of the flow maintain source in ./SRC directory

openfpga_flow/regression_test_scripts/basic_reg_test.sh

@@ -202,6 +202,9 @@ run-task basic_tests/group_config_block/group_config_block_hetero_fabric_tile $@
 run-task basic_tests/group_config_block/group_config_block_hetero_fabric_tile_Lshape $@
 run-task basic_tests/group_config_block/group_config_block_homo_fabric_tile_global_tile_clock_io_subtile $@
 
+echo -e "Module naming";
+run-task basic_tests/module_naming/using_index $@
+
 echo -e "Testing global port definition from tiles";
 run-task basic_tests/global_tile_ports/global_tile_clock $@
 run-task basic_tests/global_tile_ports/global_tile_clock_subtile $@

openfpga_flow/tasks/basic_tests/module_naming/using_index/config/task.conf

@@ -0,0 +1,39 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = false
+spice_output=false
+verilog_output=true
+timeout_each_job = 20*60
+fpga_flow=yosys_vpr
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/module_rename_full_testbench_example_script.openfpga
+openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k4_N4_40nm_cc_openfpga.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/fixed_sim_openfpga.xml
+openfpga_group_tile_config_option=--group_tile ${PATH:TASK_DIR}/config/tile_config.xml
+openfpga_add_fpga_core_module=
+openfpga_vpr_device=auto
+openfpga_vpr_route_chan_width=20
+openfpga_fabric_module_name_options=--name_module_using_index
+
+[ARCHITECTURES]
+arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k4_N4_tileable_TileOrgzTl_40nm.xml
+
+[BENCHMARKS]
+bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/or2/or2.v
+
+[SYNTHESIS_PARAM]
+bench_read_verilog_options_common = -nolatches
+bench0_top = or2
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+end_flow_with_test=

openfpga_flow/tasks/basic_tests/module_naming/using_index/config/tile_config.xml

@@ -0,0 +1 @@
+<tiles style="top_left"/>