[test] add a test case to validate negative edge-triggered ff

openfpga_flow/tasks/basic_tests/k4_series/k4n4_fracff2edge/config/pin_constraints_reset.xml

@@ -0,0 +1,8 @@
+<pin_constraints>
+  <!-- For a given .blif file, we want to assign 
+       - the reset signal to the op_reset[0] port of the FPGA fabric
+    -->
+  <set_io pin="op_reset[0]" net="reset"/>
+  <set_io pin="clk[0]" net="clkn"/>
+</pin_constraints>
+

openfpga_flow/tasks/basic_tests/k4_series/k4n4_fracff2edge/config/task.conf

@@ -0,0 +1,42 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = false
+spice_output=false
+verilog_output=true
+timeout_each_job = 3*60
+fpga_flow=yosys_vpr
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/example_without_ace_script.openfpga
+openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k4_frac_N4_fracff2edge_40nm_cc_openfpga.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/fixed_sim_openfpga.xml
+
+[ARCHITECTURES]
+arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k4_frac_N4_tileable_fracff2edge_40nm.xml
+
+[BENCHMARKS]
+bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/counters/counter_8bit_negedge_async_reset/counter.v
+
+[SYNTHESIS_PARAM]
+# Yosys script parameters
+bench_yosys_cell_sim_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/openfpga_dff_sim.v
+bench_yosys_dff_map_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/openfpga_dff_map.v
+bench_read_verilog_options_common = -nolatches
+bench_yosys_common=${PATH:OPENFPGA_PATH}/openfpga_flow/misc/ys_tmpl_yosys_vpr_dff_flow.ys
+bench_yosys_rewrite_common=${PATH:OPENFPGA_PATH}/openfpga_flow/misc/ys_tmpl_yosys_vpr_flow_with_rewrite.ys;${PATH:OPENFPGA_PATH}/openfpga_flow/misc/ys_tmpl_rewrite_flow.ys
+
+bench0_top = counter
+bench0_openfpga_pin_constraints_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tasks/basic_tests/k4_series/k4n4_fracff2edge/config/pin_constraints_reset.xml
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+end_flow_with_test=
+vpr_fpga_verilog_formal_verification_top_netlist=