To support FPGA Verilog/SPICE, Verily and Bitstream Generator, physical modules containing gate-level and transistor-level features are required for FPGA primitive blocks.
For each module that appears in the FPGA architecture, a circuit model should be defined. In the definition of a circuit model, the user can specify if the Verilog/SPICE netlist of the module is either auto-generated or user-defined.
***type**: can be [ ``inv_buf`` | ``pass_gate`` | ``gate`` | ``mux`` | ``wire`` | ``chan_wire`` | ``sram`` | ``lut`` | ``ff`` | ``scff`` | ``hard_logic`` | ``iopad`` ]. Specify the type of circuit model. The provided types cover all the modules in FPGAs. For the circuit models in the type of mux/wire/chan_wire/lut, FPGA-Verilog/SPICE can auto-generate Verilog/SPICE netlists. For the rest, FPGA-Verilog/SPICE requires a user-defined Verilog/SPICE netlist.
***name**: define the name of this circuit model. The name should be unique and will be used to create the sub-circuit of the circuit model in Verilog/SPICE netlists. Note that for a customized Verilog/SPICE netlist, the name defined here should be the name of the top-level sub-circuit in the customized Verilog/SPICE netlist. FPGA-Verilog/SPICE will check if the given name is conflicted with any reserved words.
***prefix**: specify the name of the circuit_model to shown in the auto-generated Verilog/SPICE netlists. The prefix can be the same as the name defined above. And again, the prefix should be unique.
***is_default**: can be [``1`` | ``0``], corresponding to [``true`` | ``false``] respectively. Specify this circuit model is the default one for some modules, such as multiplexers. If a module is not linked to any circuit model by users, FPGA-Verilog/SPICE will find the default circuit model defined in the same type and link. For a circuit model type, only one circuit model can be set as default.
***circuit_netlist**: specify the path and file name of a customized Verilog/SPICE netlist. For some modules such as SRAMs, FFs, inpads, and outpads, FPGA-Verilog/SPICE does not support auto-generation of the transistor-level sub-circuits because their circuit design is highly dependent on the technology nodes. These circuit designs should be specified by users. For the other modules that can be auto-generated by FPGA-Verilog/SPICE, the user can also define a custom netlist. Multiplexers cannot be user-defined.
***verilog_netlist**: specify the path and file name of a customized Verilog netlist. For some modules such as SRAMs, FFs, inpad and outpads, FPGA-Verilog/SPICE does not support auto-generation of the transistor-level sub-circuits because their circuit design is highly dependent on the technology nodes. These circuit designs should be specified by users. For the other modules that can be auto-generated by FPGA-Verilog/SPICE, the user can also define a custom netlist. Multiplexers cannot be user-defined.
***dump_structural_verilog**: when the value of this keyword is set to be true, Verilog generator will output gate-level netlists of this module, instead of behavior-level. Gate-level netlists bring more opportunities in layout-level optimization while behavior-level is more suitable for high-speed formal verification and easier in debugging with HDL simulators.
..note:: Under the XML node circuit_model, the features of transistor-level designs can be defined. In the following table, we show the common features supported for all the modules. Then, we will introduce unique features supported only for some circuit models types.
***exist:** [on|off]. Define the existence of the input_buffer or output_buffer. Note that the existence is valid for all the inputs and outputs. Note that if users want only part of the inputs (or outputs) to be buffered, this is not supported here. A solution can be building a user-defined Verilog/SPICE netlist.
***circuit_model_name:** Specify the name of circuit model which is used to implement input/output buffer, the type of specified circuit model should be inv_buf.
***circuit_model_name:** Specify the name of the circuit model which is used to implement transmission gate, the type of specified circuit model should be pass_gate.
***type:** can be [input|output|sram|clock]. For programmable modules, such as multiplexers and LUTs, SRAM ports should be defined. For registers, such as FFs and memory banks, clock ports should be defined.
***default_val:** default logic value of a port, which is used as the initial logic value of this port in testbench generation. Can be either 0 or 1. We assume each pin of this port has the same default value.
***mode_select:** can be either ``true`` or ``false``. Specify if this port controls the mode switching in a configurable logic block. Only valid when the type of this port is sram. (A configurable logic block can operate in different modes, which is controlled by SRAM bits.)
***is_global:** can be either ``true`` or ``false``. Specify if this port is a global port, which will be routed globally. Note that when multiple global ports are defined with the same name, these global ports will be short-wired together.
***is_set:** can be either ``true`` or ``false``. Specify if this port controls a set signal. Only valid when ``is_global`` is true. All the set ports are connected to global set voltage stimuli in testbenches.
***is_reset:** can be either ``true`` or ``false``. Specify if this port controls a reset signal. Only valid when ``is_global`` is true. All the reset ports are connected to a global reset voltage stimuli in testbenches.
***is_config_enable:** can be either ``true`` or ``false``. Only valid when ``is_global`` is true. Specify if this port controls a configuration-enable signal. This port is only enabled during FPGA configuration, and always disabled during FPGA operation. All the ``config_enable`` ports are connected to global configuration-enable voltage stimuli in testbenches.
..note:: Different types of ``circuit_model`` have different XML syntax, with which users can highly customize their circuit topologies. See refer to examples of ``circuit_model`` for more details.
..note:: Note that we have a list of reserved port names, which indicate the usage of these ports when building FPGA fabrics. Please do not use ``mem_out``, ``mem_inv``, ``bl``, ``wl``, ``blb``, ``wlb``, ``ccff_head`` and ``ccff_tail``.
Circuit design is a dominant factor in Power, Performance, Area (P.P.A.) of FPGA fabrics.
Upon practical applications, the hardware engineers may select various circuits to implement their FPGA fabrics.
For instance, a ultra-low-power FPGA may be built with ulta-low-power circuit cells while a high-performance FPGA may use absolutely different circuit cells.
OpenFPGA provide enriched XML syntax for users to highly customize their circuits in FPGA fabric.
In the XML file, users can define a library of circuits, each of which corresponds to a primitive module required in the FPGA architecture.
Users can specify if the Verilog/SPICE netlist of the module is either auto-generated by OpenFPGA or provided by themselves.
As such, OpenFPGA can support any circuit design, leading to high flexibility in building FPGA fabrics.
In principle, a circuit library consists of a number of ``<circuit_model>``, each of which correspond to a circuit design.
OpenFPGA supports a wide range of circuit designs.
The ``<circuit_model>`` could be as small as a cornerstone cell, such as inverter, buffer *etc*., or as large as a hardware IP, such as Block RAM.
..code-block:: xml
<circuit_library>
<circuit_model type="<string>" name="<string>">
<!-- Detailed circuit-level design parameters -->
</circuit_model>
<!-- More circuit models -->
</circuit_library>
Currently, OpenFPGA supports the following categories of circuits:
- inverters/buffers
- pass-gate logic, including transmission gates and pass transistors
- standard cell logic gates, including AND, OR and MUX2
- metal wires
- multiplexers
- flip-flops
- Look-Up Tables, including single-output and multi-output fracturable LUTs
- Statis Random Access Memory (SRAM)
- scan-chain flip-flops
- I/O pad
- hardware IPs
Circuit Model
^^^^^^^^^^^^^
As OpenFPGA supports many types of circuit models and their circuit-level implementation could be really different, each type of circuit model has special syntax to customize their designs.
However, most circuit models share the common generality in XML language.
Here, we focus these common syntax and we will detail special syntax in :ref:`circuit_model_examples`
Specify the general attributes for a circuit model
-``type="inv_buf|pass_gate|gate|mux|wire|chan_wire|sram|lut|ff|ccff|hard_logic|iopad"`` Specify the type of circuit model. For the circuit models in the type of mux/wire/chan_wire/lut, FPGA-Verilog/SPICE can auto-generate Verilog/SPICE netlists. For the rest, FPGA-Verilog/SPICE requires a user-defined Verilog/SPICE netlist.
-``name="<string>"`` Specify the name of this circuit model. The name should be unique and will be used to create the Verilog/SPICE module in Verilog/SPICE netlists. Note that for a customized Verilog/SPICE netlist, the name defined here MUST be the name in the customized Verilog/SPICE netlist. FPGA-Verilog/SPICE will check if the given name is conflicted with any reserved words.
-``prefix="<string>"`` Specify the name of the ``<circuit_model>`` to shown in the auto-generated Verilog/SPICE netlists. The prefix can be the same as the name defined above. And again, the prefix should be unique
-``is_default="true|false"`` Specify this circuit model is the default one for those in the same types. If a primitive module in VPR architecture is not linked to any circuit model by users, FPGA-Verilog/SPICE will find the default circuit model defined in the same type.
-``spice_netlist="<string>"`` Specify the path and file name of a customized SPICE netlist. For some modules such as SRAMs, FFs, I/O pads, FPGA-SPICE does not support auto-generation of the transistor-level sub-circuits because their circuit design is highly dependent on the technology nodes. These circuit designs should be specified by users. For the other modules that can be auto-generated by FPGA-SPICE, the user can also define a custom netlist.
-``verilog_netlist="<string>"`` Specify the path and file name of a customized Verilog netlist. For some modules such as SRAMs, FFs, I/O pads, FPGA-Verilog does not support auto-generation of the transistor-level sub-circuits because their circuit design is highly dependent on the technology nodes. These circuit designs should be specified by users. For the other modules that can be auto-generated by FPGA-Verilog, the user can also define a custom netlist.
-``dump_structural_verilog="true|false"`` When the value of this keyword is set to be true, Verilog generator will output gate-level netlists of this module, instead of behavior-level. Gate-level netlists bring more opportunities in layout-level optimization while behavior-level is more suitable for high-speed formal verification and easier in debugging with HDL simulators.
..warning::``prefix`` may be deprecated soon
..note:: Multiplexers cannot be user-defined.
..note:: For a circuit model type, only one circuit model can be set as default.
..note:: If ``<spice_netlist>`` or ``<verilog_netlist>`` are not specified, FPGA-Verilog/SPICE auto-generates the Verilog/SPICE netlists for multiplexers, wires, and LUTs.
..note:: The user-defined netlists, such as LUTs, the decoding methodology should comply with the auto-generated LUTs!!!
Design Technology
^^^^^^^^^^^^^^^^^
..option::<design_technology type="string"/>
Specify the design technology applied to a ``<circuit_model>``
-``type="cmos|rram"`` Specify the type of design technology of the ``<circuit_model>``. Currently, OpenFPGA supports CMOS and RRAM technology for circuit models.
CMOS technology can be applied to any types of ``<circuit_model>``, while RRAM technology is only applicable to multiplexers and SRAMs
..note:: Each ``<circuit_model>`` may have different technologies
-``exist="true|false"`` Define the existence of the input buffer. Note that the existence is valid for all the inputs.
-``circuit_model_name="<string>"`` Specify the name of circuit model which is used to implement input buffer, the type of specified circuit model should be ``inv_buf``.
-``exist="true|false"`` Define the existence of the output buffer. Note that the existence is valid for all the outputs. Note that if users want only part of the inputs (or outputs) to be buffered, this is not supported here. A solution can be building a user-defined Verilog/SPICE netlist.
-``circuit_model_name="<string>"`` Specify the name of circuit model which is used to implement the output buffer, the type of specified circuit model should be ``inv_buf``.
..note:: If users want only part of the inputs (or outputs) to be buffered, this is not supported here. A solution can be building a user-defined Verilog/SPICE netlist.
-``circuit_model_name="<string>"`` Specify the name of the circuit model which is used to implement pass-gate logic, the type of specified circuit model should be ``pass_gate``.
..note:: pass-gate logic are used in building multiplexers and LUTs.
Circuit Port
^^^^^^^^^^^^
A circuit model may consist of a number of ports. The port list is mandatory in any ``circuit_model`` and must be consistent to any user-defined netlists.
Define the attributes for a port of a circuit model.
-``type="input|output|sram|clock"`` Specify the type of the port, i.e., the directionality and usage. For programmable modules, such as multiplexers and LUTs, SRAM ports MUST be defined. For registers, such as FFs and memory banks, clock ports MUST be defined.
-``prefix="<string>"`` the name of the port to appear in the autogenerated netlists. Each port will be shown as ``<prefix>[i]`` in Verilog/SPICE netlists.
-``lib_name="<string>"`` the name of the port defined in standard cells or customized cells. If not specified, this attribute will be the same as ``prefix``.
-``default_val="<int>"`` Specify default logic value for a port, which is used as the initial logic value of this port in testbench generation. Can be either 0 or 1. We assume each pin of this port has the same default value.
-``circuit_model_name="<string>"`` Specify the name of the circuit model which is connected to this port.
-``io="true|false"`` Specify if this port should be treated as an I/O port of an FPGA fabric. When this is enabled, this port of each circuit model instanciated in FPGA will be added as an I/O of an FPGA.
-``mode_select="true|false"`` Specify if this port controls the mode switching in a configurable logic block. This is due to that a configurable logic block can operate in different modes, which is controlled by SRAM bits.
-``is_global="true|false"`` can be either ``true`` or ``false``. Specify if this port is a global port, which will be routed globally.
..note:: For input ports, when multiple global input ports are defined with the same name, by default, these global ports will be short-wired together. When ``io`` is turned on for this port, these global ports will be independent in the FPGA fabric.
..note:: For output ports, the global ports will be independent in the FPGA fabric
-``is_set="true|false"`` Specify if this port controls a set signal. All the set ports are connected to global set voltage stimuli in testbenches.
-``is_reset="true|false"`` Specify if this port controls a reset signal. All the reset ports are connected to a global reset voltage stimuli in testbenches.
-``is_config_enable="true|false"`` Specify if this port controls a configuration-enable signal. Only valid when ``is_global`` is ``true``. This port is only enabled during FPGA configuration, and always disabled during FPGA operation. All the ``config_enable`` ports are connected to global configuration-enable voltage stimuli in testbenches.
..note::``is_set``, ``is_reset`` and ``is_config_enable`` are only valid when ``is_global`` is ``true``.
..note:: Different types of ``circuit_model`` have different XML syntax, with which users can highly customize their circuit topologies. See refer to examples of :ref:``circuit_model_example`` for more details.
..note:: Note that we have a list of reserved port names, which indicate the usage of these ports when building FPGA fabrics. Please do not use ``mem_out``, ``mem_inv``, ``bl``, ``wl``, ``blb``, ``wlb``, ``ccff_head`` and ``ccff_tail``.
