This commit adds a new unified firmware for the wilc1000
staging driver with below items addressed.
- Single firmware supports STA, AP and P2P modes.
- Support suspend/resume on WILC1000.
- Verify PS stability for WILC1000.
- Bug fixes
Version of FW: v14.04
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add the firmwares for the i.MX SDMA driver that runs on i.MX6
and i.MX7.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Nitin Garg <nitin.garg@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware files for the VIC falcon controller for Tegra124,
Tegra210 and Tegra186.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This updates Kabylake audio dsp firmware to latest version.
The version of this firmware release is 9.21.00.2042_46
The md5sum of this firmware binary is 411e2b3b528f0eec194304feb7dee4ae
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This version adds support for CN2360-based 10G adapters, as well
as improvements in performance. VXLAN offload and general UDP
performance are improved. Interrupt moderation is also improved.
This image will be loaded by rsi driver. Firmware version is 1.5.3
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add first firmware for the Mellanox Spectrum switch, as a followup to the
recently added commit:
6b7421992b8d ("mlxsw: spectrum: Validate firmware revision on init")
The version of the firmware release is 13.1420.122
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the latest firmware from wil6210 4.1 firmware branch.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Update dc firmware to produciton signed v1.18
Remove platform data for channel tuning on Intel OPA HFI adapter 100 series
Update version numbers in WHENCE file
Signed-off-by: John Fleck <john.fleck@intel.com>
The new QED firmware has 2 main purposes -
First, it contains fixes to various initializations and firmware
logic including:
- Corrects iSCSI fast retransmit when data digest is enabled.
- Stop draining packets when receiving several consecutive PFCs.
- Prevent possible assertion when consecutively opening/closing
many connections.
- Prevent possible asserton due to too long BDQ fetch time.
In addition, this firmware contains sufficient infrastructure on which
we'll add iWARP support in our drivers.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
WLAN (USB) firmware version: 16.68.1.p113.
Bluetooth (USB) firmware version: 16.26.1.p113.
Both WLAN and bluetooth are on USB interface.
The combo image will be downloaded through WLAN only.
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p112
Bluetooth (SDIO) firmware version: 15.68.7.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Firmware version for this image is 15.68.1.p71
The image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
This version has performance improvements for CN23XX-based LiquidIO II
adapters, as well as some stability fixes.
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <dchickles@cavium.com>
It has been reported that the GP107 firmware would not pass signature
verification due to the wrong files being released. Replace them with
the proper files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
These NVIDIA-signed firmwares are required to enable the graphics
engine on the Jetson TX2 board and other TX2-based devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Adding PF only NIC fw for Netronome Agilio CX SmartNICs
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
This updates Broxton audio dsp firmware to latest version. This update
fixes some fw issues.
The version of this firmware release is 9.22.01.2219_64
The md5sum of this firmware binary is d253b06c09be6e6095ff34dc3fe632e2
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
During PCIe reset, wifi-only firmware will be download to device
in case bluetooth part do not get affected.
Firmware version for this image is 16.68.1.p97
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
This new firmware for the qed* adapters fixes multiple issues:
- Prevent accidental drops in Tx-switching between VFs.
- Corrct VF cleanup for higher VFs.
- Better handling of RoCE error flows.
- MR registration/deregistration corrections.
- Prevent possible HW attention during offloaded TCP teardown.
- Corrections to iSCSI retransmit flows.
In addition, this firmware is a requirement for supporting the
QL41xxx series of adapters, as it contains the necessary init
and firmware logic for those.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add new board images:
bus=pci,vendor=168c,device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520
bus=pci,vendor=168c,device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0519
bus=pci,vendor=168c,device=003e,subsystem-vendor=1028,subsystem-device=0310,variant=RV_0519
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Update to latest version as it reportedly resolves issues when
operating in 5GHz band.
Reported-by: Brennan Ashton <brn@deako.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 20:45:00 +0530
Subject: [PATCH 3/3] linux-firmware: Update firmware file for Intel Bluetooth
8265
This patch adds the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).
FW Build: REL0101
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 20:42:45 +0530
Subject: [PATCH 2/3] linux-firmware: Update firmware patch for Intel Bluetooth
8260
This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)
FW Build: REL0370
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 18:01:37 +0530
Subject: [PATCH 1/3] linux-firmware: Update firmware patch for Intel Bluetooth
7265
This patch updates the firmware patch for Intel Bluetooth 7265 (D1)
also, it is known as Intel StP D1
StP D1 FW Patch Version: 28
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds Geminilake audio dsp firmware
The version of this firmware release is 9.92.01.1814
The md5sum of this firmware binary is bbae15b8545fb41c12dcc886b758ad8a
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
For some reason these 2 files got corrupted
when propagating the release to this repository.
i915 firmware got first release at:
https://01.org/linuxgraphics/downloads/firmware
then propagated to linux-firmware.git.
The version on 01.org are the right ones.
This issue has been identified by Jason. He
noticed that GuC image from linux-firmware.git
wasn't getting loaded on his Kabylake, while
the version on 01.org was working propertly.
In a further review I identified that also GuC
image for Broxton faced a similar issue. All other
files on i915 are the proper one matching with
the ones released on 01.org.
Cc: Jason Curtiss <jason.curtiss@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Kalle Valo
Kyle McMartin
Aditya Shankar
Nitin Garg
Mikko Perttunen
Himanshu Madhani
Subhransu S. Prusty
Stanimir Varbanov
Derek Chickles
Amitkumar Karwar
Yotam Gigi
Ganesh Goudar
Maya Erez
John Fleck
Yuval Mintz
Emmanuel Grumbach
Ganapathi Bhat
Larry Finger
Xinming Hu
Alexandre Courbot
Andrew-CT Chen
Pablo Cascón
Arend van Spriel
jaya.p.g
Rodrigo Vivi